Does Google ignore the privacy settings of iOS ?

In the privacy settings of iOS I have disabled access to my pictures for the Google+ App on my iPhone and on my iPad. However I still get emails from Google+ that it uploaded pictures I took with my iPhone. Is Google cheating here ?

Obviously, this did not solve the question. I don't know how it got marked that way or how to unmark it, but congratulations on the ten points!
The cells inspector is not interesting. It shows the same thing for both the correct and the incorrect cells. The text inspector is the same for both cells also. I have checked all the panes in the inspector and can't find a setting that is different.
I have found a workaround on another Numbers document with the same problem. I selected the entire table and reapplied the table format to the selection, then I went back and set the format to the various columns and rows. The problem is that if you paste in information from another document, the results are unpredictable, sometimes conforming to the destination formatting, sometimes not.
I'd email you the document, but I'd need an address.

Similar Messages

Flex 3: Does Google Ignore URLs with # in Sitemaps?

Hi,
I'm making a sitemap for my Flex 3 site. Does Google ignore everything after the # in a url listed in a sitemap. For example, if my sitemap lists:
www.brainpinata.com/#
www.brainpinata.com/#view=2
www.brainpinata.com/#view=12
www.brainpinata.com/#view=15
Will the pages #view=2, #view=1, #view=15 be ignored?
How does Google handle # in sitemaps?
Thank you.
-Laxmidi

Now on FF 10.0.1
Thanks but that did not work.
I think it may have something to do with conditions that set cookies for MapsGL (for compatibility?) when the page is loaded because it all started when google added Experience MapsGL which never came up on maps.google.com.au instead I got the message "Still loading... Slow? Use the troubleshooting guide or basic HTML."
What ever it is, it probably has something to do with a cookie being set when the page loads and that triggers "Still loading... Slow? Use the troubleshooting guide or basic HTML." It could be the cookie is set and then read again or the cookie is set and it causes and error in a script.
could be advertising for chrome :( :D
Something like that would explain why disabling cookies or private browsing works but deleting cookies does not.
It's still strange that it happens on the .au site. Will keep looking because this is driving me crazy.
EDIT> to clear thing up maps.google.com.au loads the entire page but the little yellow guy is not yellow. (disabled) then if I try drag or use the map, then I get the error "Still loading... Slow? Use the troubleshooting guide or basic HTML."
I will do anything to track down the problem.
Not sure but error console has lots of error with and without cookies enabled but this one stood out and was only there with cookies enabled
Error: uncaught exception: [Exception... "Component returned failure code: 0x8052000b (NS_ERROR_FILE_CORRUPTED) [nsIDOMStorage.getItem]" nsresult: "0x8052000b (NS_ERROR_FILE_CORRUPTED)" location: "JS frame :: http://maps.gstatic.com/cat_js/intl/en_au/mapfiles/395d/maps2/%7Bmain,mod_util,mod_rst%7D.js :: <TOP_LEVEL> :: line 1108" data: no]

Getting Error message ""This set top box does not match the account settings"

Just ordered a new wireless receiver for the bedroom. Installed it and now getting the following error "This set top box does not match the account settings". Service was suppose to be enabled on Monday the 4th, but I recieved the hardware early and turned it on. I've since rebooted and unplugged and tried everything to no avail. Any thoughts on how I might get this to work? Regards, Rick

your wireless receiver is misconfigured (dirty) and need to be scrubbed clean.
A tech (service visit) or tier 2 rep (phone or chat) can do this. The receiver needs to be unplugged, on the bottom of receiver is a GUI (long number) that will be needed to identify receiver, when instructed plug just the receiver in that gave number for, when that one is connected.
Your choice 4 hour appointment window, or time on phone , or chat.
If these have not been activated yet.... When screen comes up, depress OK on receiver, depress button on WAP, when the screen at receiver says try again, Depress OK button (remote or on stb) another screen for update, depress OK give about 10 minutes to load, reboot when checking depress menu to verify recordings, if no recordings menu not finished booting.
Set aspect ratio MENU, OPTIONS, etc.
should take about 20 minutes per receiver.

Does anybody know the exact date when iOS 6 will be released?

Does anybody know the exact date when iOS 6 will be released? I know it will be coming out in the Fall, but I was wondering if anybody knew the exact date.

no one but apple knows for sure, and I'm willing to bet at this point in time all they have is a target date (if the software package was done it'd be released)
Bear in mind also, the first 48-72 hours after the software's release it's often quite challenging to get the update or it takes a lot of time because you're one of millions that are trying to get on the servers. So release date and available/accessible date can be separated by a bit.

AppFabric 1.1 with Windows 7 losing or abandone sessions and ignore the timeout settings

Hi,
We have a enterprise financial web solution using aspx and AppFabric 1.1 and we have an issue with Sessions as the get abandoned or appFabric is ignoring the timeout settings.
I tried almost everything: use sql and xml configuration, deactivate firewalls, ensure all sessions are set to 20 minutes expirations. We have the appFabric settings on the web.config and our project is multilayer but sessions are mainly
created/consumed at the web project level..
We use AppFabric 1.1 with Sql Server 2008R2 over a Windows7 x64 environment.
I also tried all the options using powerShell command: get-command -module DistributedCacheAdministration, I increased the TTL to 38 mins but still nothing makes any difference. Sessions are lost between ~~ 5 to 10 minutes no matter if
you are playing with the solution or you left aside..
Please help. I really appreciate any suggestion, idea, recommendation..
Hernan Bogantes
Florida.

Note the provider type in AF 1.1 is
type="Microsoft.Web.DistributedCache.DistributedCacheSessionStateStoreProvider,Microsoft.Web.DistributedCache"
which is different from the type in 1.0:
type="Microsoft.ApplicationServer.Caching.DataCacheSessionStoreProvider"
https://msdn.microsoft.com/en-us/library/hh361709(v=azure.10).aspx

How can I enable access to my photos if it's not on the privacy settings?

How can I enable access to my photos if it's not on the privacy settings?

Not sure what you are asking. If you want to make your photos available for others to access, the following is one option: https://www.apple.com/icloud/icloud-photo-sharing.html

WHY Gnome ignores the nvidia-settings --load-config ...?

ftp://download.nvidia.com/XFree86/Linux … overridden
"If you believe that your desktop environment is overriding settings that you configured in nvidia-settings, some possible solutions are:
1. Use the display configuration tools provided as part of the desktop environment (e.g. gnome-control-center display, gnome-display-properties, kcmshell4 display, unity-control-center display, xfce4-display-settings) to configure your displays, instead of the nvidia-settings control panel or the xrandr command line tool. Setting your desired configuration using the desktop environment’s tools should cause that configuration to be the one which is restored when the desktop environment overrides the existing configuration from nvidia-settings. If you are not sure which tools your desktop environment uses for display configuration, you may be able to discover them by navigating any available system menus for “Display” or “Monitor” control panels.
2. For settings loaded from ~/.nvidia-settings-rc which have been overridden, run nvidia-settings --load-config-only as needed to reload the settings from ~/.nvidia-settings-rc.
3. Disable any features your desktop environment may have for managing displays. (Note: this may disable other features, such as display configuration tools that are integrated into the desktop.)
4. Use a different desktop environment which does not actively manage display configuration, or do not use any desktop environment at all…"
It’s very frustrating for me. The driver is good and efficient, but you can not permanently set of personal values of brightness, contrast and gamma.
It is there a chance to Gnome offered brightness and contrast controls integrated with gnome-tweak-tool or with any other tool?
https://wiki.archlinux.org/index.php/NV … a-settings
I found a lot of instructions "how to", but not met with confirmation: IT WORKS.

The 2 value is the default value by the way. If you start your X-session without your nvidia command, you will see it:
nvidia-settings -q all | grep 'Pixmap'
I don't know how it will work out for others, but the 0 value feels the best for me, and generally the lower the value the better. (thus, 4 seems the worst)
I tried to experiment with the "PixmapCacheRoundSizeKB" attribute as well, but didn't notice any improvement, and it was kind of a letdown.
Oh, and firefox seems way too sluggish to even try to make it smoother, google-chrome ftw.
Anyway, I think the thread gets derailed with this discussion, maybe it would be better to start a new one in a different subforum and talk about the possible nvidia settings.
edit. Ok, I just discovered that 0 value messes up my fonts in some applications. I think I'll stick with the default value.
Last edited by T.J.S. (2012-11-18 22:35:37)

I want to change the privacy settings on my e-mail, I provided the password once and now it opens without one

I want to change the security settings on my e-mail. I provided a password once and now it opens without one. I want to keep my messages private.
== This happened ==
Every time Firefox opened
== When I updated.

Websites remembering you and automatically log you in is stored in a cookie
Tools > Options > Privacy > Cookies: "Show Cookies"
See also [[Cookies]]

How can I edit the privacy settings for my daughters Apple ID.

My daughter has forgotten her privacy settings. She has $80 in credit and would like to use them. How can she edit her privacy settings?

What do you mean by 'privacy settings' ?
If you mean the Settings > General > Restrictions passcode on her iPad then was it on the iPad when she last backed up ? If not then she can restore to that backup and it should be removed. If it was on the iPad when she last backed up then the only way to remove it is to reset the iPad back to factory defaults and she can then re-sync your content back to her iPad - she won't be able to restore to the backup as that will keep the code in place.
If you mean the answers to her security questions, then if she has a rescue email address (which is not the same thing as an alternate email address) on her account then the steps on this page will give you a reset link on her account : http://support.apple.com/kb/HT6170
If she doesn't have a rescue email address (she won't be able to add one until she can answer her questions) then sher will need to contact Support in her country to get the questions reset.
Contacting Apple about account security : http://support.apple.com/kb/HT5699
When they've been reset (and if she doesn't already have a rescue email address) sher can then use the steps on this page to add a rescue email address for potential future use : http://support.apple.com/kb/HT5620
If you mean something else ... ?

Why does zoom in the Accessibility settings shift spontaneously from off to on?

Several times I have set the Zoom command in the Accessibility settings to off, and later, after the screen zooms in, I find it set, on its own, to on. I can zoom out normally and then goWhy is it doing this?

Try this again.
Several times I have set the Zoom command in the Accessibility settings to off, and later, after the screen zooms in, I find it set, on its own, to on. I can zoom out normally and then go to settings and set zoom to off, but later the zoom setting spontaneously goes to on again.
Why is it doing this?

The router is connected but how do I secure the privacy settings?

My router is connected and working. I want to implement a security factor where no one else other than our family can access our internet. When I try to go to the controls such as view it appears the software does not detect the network is set up? It's asking us to reinstall the router. Again the router is set up but the software will not allow me to access the various options.
Message Edited by OnnagokorO on 12-06-2007 12:42 AM

Yes it is possible to secure the network so that only your family members should access the internet ......
Open router set up page using http://192.168.1.1 ....you will see username & password screen .... leave username blank & in password use admin.....
Click wireless ...change the network name to any non-linksys network name .... click save settings....
Click on wireless security ..... use either WEP or WPA security level...... have a note of the key ..... click save settings ...
On wireless computers once the wireless utilitied are configured to all computer .....only the configured computer will go online
You can also check this link ......

How do I install a fresh Thunderbird that does not keep the old settings

I have thunderbird with a mish mash of folders etc. I just want it to copy my folders in OUTLOOK that I originally did a few years ago. But I stopped using Thunderbird for awhile and went back to OUTLOOK. Now the Thunderbird and Outlook folders are totally different.
I have uninstalled Thunderbird. Reinstalled it. Everytime I reinstall it it picks up where it left off with the original settings. I want a fresh empty thundirbird.
How do I do that?
Giovanni

Delete your existing profile using profile manager.
https://support.mozilla.org/en-US/kb/using-multiple-profiles
If there is anything you want to keep in the old profile make sure you create a backup prior to deleting it.

HT2409 I'm getting "can't add volume. Unknown error occured" when I try and add my Mac hard drive to the privacy settings

I'm getting "can't add volume. Unknown error occured" when I try and add my Mac hard drive to the privacy settings

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

Safari does not store the latest settings

When I´m changing the settings of safari next time when I start it - Safari shows the Welcome Page without previous settings. Where do I have to change this behaviour?

Triple-click anywhere in the line below on this page to select it:
~/Library/Preferences/com.apple.Safari.plist
Right-click or control-click the highlighted line and select
Services ▹ Show Info in Finder (or just Show Info)
from the contextual menu.* An Info dialog should open.
☞ Does the dialog show "You can read and write" in the Sharing & Permissions section?
☞ In the General section, is the box labeled Locked checked?
☞ What is the Modified date?
If you don't have read and write access to the item, change the settings as directed here. Note, however, that if one file has wrong access settings, most likely others do as well. If the item is locked, unlock it.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. Open a TextEdit window and paste into it (command-V). Select the line you just pasted and continue as above.

How do I find the privacy settings on instagram on my iPad mini?

I have downloaded instagram on my iPad mini (using the instagram for iPhone app) My daughter has instagram on my phone. I am trying to follow her using her email address. I go on Settings> Find people to follow> Contacts. I get an error message- "Couldn't load users. Please go to Settings> Privacy > Contacts to allow instagram to access your contacts. I go back to Settings> I then have no "Privacy" or "Contacts" option. Can anyone help?

Thank you! I found it! However, now I have another problem! When I go to Find people to follow > Contacts, it says I have no contacts :( But there are contacts there! I'm particularly wanting my daughter who is saved with an email address.

Does Google ignore the privacy settings of iOS ?

Similar Messages

Maybe you are looking for