DOES GPS WORKS IN THE FIRST VERSION OF IPHONE?

I GOT AN IPHONE 8 GB AND I'M TRYING TO FIRUGE OUT IF THERE IS A GPS APP FOR THIS IPHONE, BECAUSE I COULD NOT FIND ANY, SO PLEASE WHO KNOWS SOMETHING ABOUT IT?

First, turn off CAPS LOCK - it's considered rude to shout.
The Maps application works on both the 3G and 1st generation phone, but there are differences...
In the original iPhone, the locate feature on the maps works by triangulating your position based on the cell towers near your phone. The accuracy varies widely - from 100ft up to a few miles, but it works indoors or out.
In the 3G iPhone, the maps can still use the same method, but because the 3G iPhone has additional GPS hardware, it can triangulate it's position based on satellite signals to a greater degree of accuracy, typically 20 - 30ft, but only if it has some satellites 'in sight'.

Similar Messages

HT204407 Notification when departing or arriving a location does not work in the latest version of find my friends (ios 7).

Notification when departing or arriving a location does not work in the latest version of find my friends (ios 7).

This is a user to user community, Apple are unlikely to read your comments, if you have any suggestions that you think might enhance iCloud you can send Apple your feedback here.

My "undo" command does not work in the new version of GB. Please advise. This is a real problem. I had no issues with GB from iLife 11.

My "undo" command does not work in the new version of GB. Please advise. This is a real problem. I had no issues with GB from iLife 11.

Most likely you have Office 2004 which are PPC-only applications and will not work in Lion. Upgrade to Office 2011. Other alternatives are:
Apple's iWork suite (Pages, Numbers, and Keynote.)
Open Office (Office 2007-like suite compatible with OS X.)
NeoOffice (similar to Open Office.)
LibreOffice (a new direction for the Open Office suite.)

LOV /ADF UIX pages does not work on the older version od UIX page

Hi
I have recently migrated UIX project from the Jdeveoper 9i to Jdev10g version 1.0.1.2, everything work without any issue, however when I try to create a LOV or any component that are ADF-UIX based, but it does not work I don't even get any error, it just does not work based on the ADF-UIX (Expression base component),
Any help to resolve this issue will be greatly appericated
Thanks

I too have problems with LOVs in UIX pages. I have
some that you have to run twice to get back a value.To solve this problem,
1) open your UIX page where you create a new row
2) in the Structure window, click third tab "UI Model"
3) double-click the control action binding corresponding to Create
4) select CreateInsert from the list
The problem is related to the fix we introduced for the "Blank Row Issue" (see http://www.oracle.com/technology/products/jdev/tips/muench/blankrow/index.html).
If you have access to MetaLink, please refer to Note 299860.1 and Bug 4201020.
Regards,
Didier.

I'm big fan of Google Toolbar but is does not work with the latest version of Firefox??

I made an update yesterday and all of a sudden the Google Toolbar did not match with the latest version of Firefox...??
Will that be solve or is my time with Firefox over???

whatever you are trying for me to see, it blips up on my screen for a half a second and then it goes immediately to the reply page, can you type out or cut and past the entire link or tell me the title of what the post or article is? This is even worse, Firefox doesn't work within Firefox!! now that is sad

Juno does not work with the latest version of firefox Why?

I would love to install the latest version of Firefox, but when I attempted to It indicated that It was not compatible with my Juno email service, why don't you guys ever include Juno when you do updates? Very frustrating as now my browser experience feels like my computer is dead. I finally gave up and installed Safari which is working at lightning speed. Don't suggest IE as I hate all Microsoft products,they are even worse at not testing things.

whatever you are trying for me to see, it blips up on my screen for a half a second and then it goes immediately to the reply page, can you type out or cut and past the entire link or tell me the title of what the post or article is? This is even worse, Firefox doesn't work within Firefox!! now that is sad

The streamer (automatic updating) does not work with the last version

the automatic updating of screens (streamers) do not work anymore with the new version. I use Windows sp3.

the automatic updating of screens (streamers) do not work anymore with the new version. I use Windows sp3.

SHIFT key does not work - one the first letter gets capitalized

When typing a word in ALL CAPS by pressing the SHIFT key, only the first character appears in CAPS. All subsequent characters appear in lower case even though the SHIFT key is continually pressed.
The workaround is to backspace over the lower case character(s) one at a time as they are typed and type them again in CAPS, or use the CAPS LOCK key.
This problem surfaced after a string of updates (Combo 10.5.2 update; Graphics update; keyboard firmware update) and I cannot be certain which one (if any) is responsible for the snafu.
As someone who types a lot, I urgently need to have this fixed. Thanks.
Andreas

I solved the SHIFT key problem. As it turns out, it was not the result of any update or buggy piece of software code, but a conscious (albeit erroneous) decision on my part.
A few days ago, I installed a new version of TypeIt4Me and in perusing the various settings, I selected the “No DOuble CAps” option. I misinterpreted what this option would do. It modifies the behavior of the SHIFT key which I then thought was a bug in my system.
TypeIt4Me, btw, by Riccardo Ettore, is a wonderful application. I have used it for more than a decade, and I can honestly say it is the most valuable shareware utility I have ever installed on my macs. I strongly and unconditionally recommend it to all mac users.
Andreas

Why Skype does not work with the new OS for iphone

Since I downloaded the new OS, skype for iphone does not work at all. Nobody can hear...

Have you tried deleting the app then reinstalling it? If not, give that a try.

Youtube does not work in the new version 13

youtube gives you an error message, this is not happening with other browsers or with your older versions

This might be caused by a recent Flash 11.3 update.
See:
*https://support.mozilla.org/kb/flash-113-doesnt-load-video-firefox

Trackpad of MacBook Pro mid 2009 does not respond to the first click/tap

Have the following problem and wasn't able to find any sollution here somewhere
if I click on a link or choose a checkbox or do anything by clicking it does not work with the first click/tap and I have all settings right.
a PRAM reset had no effect on that problem.
so I still have to click/tap several times to access a menu, a safari-tab, or anything else…

thank you.
still I am not sure if it really solved my problem, but it looks very good.
was a bit irritated in the beginning, because I got no feadback if I had done the SMC reset right.
If the problem will be back too soon, I will continue this discussion.
THX

10g JSpell PJC does not work with latest JSpell version

Looks like latest (10g) forms demo - Spell check with JSpell does not work with the latest version of the JSpell software (does not look like this demo been changed from the previous version).
Does anybody has a success running this or have any suggestions how to integrate it together?
Thanks for any input.

We're in contact with JSpell on this issue and will revise the integration code as soon as we recieve the relevant updates from them.

I just download and install itunes 10.5 and it worked good the first days but since yesterday it crashed up, and everytime i start it it crashes again and logged me out each time. it can´t acces my itunes account. I´m using snow leopard the last version.

I just download and install itunes 10.5 and it worked good the first days but since yesterday it crashed up, and everytime i start it it crashes again and logged me out each time. it can´t acces my itunes account. I´m using snow leopard the last version. What can i do to solve this problem and and continue using my itunes normally?

Try doing it in a WIndows Safe mode - Restart computer and hit F8 key right after your see BIOS check and choose "Safe mode with networking"
Do the SFC /SCANNOW again.
If that does not work, whilst in safe mode, download Free Malwarebyte software from CNET's Download.com. Install, update virus definition then perform a full scan. Remove if it did find some viruses or trojans. Restart computer.
Back to regular windows, do the SFC /SCANNOW again.
If that doesnot work, check to see if your Hard drive has errors or bad sectors
GO START BUTTON /COMPUTER, right mouse click OS (C:) and choose "Properties"
Choose "Tools" tab and under error checking, click "Check Now".
Make sure "Scan for and attempt recovery of bad sectors" is checked and click start.
Restart windows will perform the above task to fix errors This may take hours depends on how big is your Hard Drive
Good Luck!!.

I was running KeyPassFox with Firefox 8.0.1, but the plugin does not work in the new release (9) . Is there a way to restore my previous version with all of my bookmarks intact? I do not mind if I have to restore the plugins myself.

I was running KeyPassFox with Firefox 8.0.1, but the plugin does not work in the new release (9) . Is there a way to restore my previous version with all of my bookmarks intact? I do not mind if I have to restore the plugins myself.
The plugin shows on the list as enabled and functioning, yet the tool does not show on the toolbar. It would appear that I need to restore the previous version of Firefox and wait until a newer release of the plugin is available before upgrading the browser.

I copied the iTunes file from the external drive and it's in both places. I thought all I would need is the iTunes program (which I downloaded to new computer) and my iTunes library file. There must be something else that's missing. My iTunes library looks the same on the new computer as it does when I open it on the external drive. If I click on an iTunes library song from my new computer, it will only play if I have the external drive plugged in.
My back-up drive is a mess. I have multiple copies of music, video, photo, and document files and I don't know how that happened. ={ Obviously, I don't know how to back up stuff properly and there are back-up files extending over a 6- to 8-year period. I think all I did was just drag and drop the main folders from the back-up drive to the same main folders on the C: drive. Also (and I'm kind of fuzzy on this) Windows used to automatically save music files in a folder within my document files (which makes no sense to me). As my Jewish friends would say, "Oy Vey!"

Why when i save my indesign file down to an earlier version does it only save the first page of my document?

why when i save my indesign file down to an earlier version does it only save the first page of my document?

This forum is about the Cloud as a delivery process, not about using individual programs
If you start at the Forums Index http://forums.adobe.com/index.jspa
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says ALL FORUMS) to open the drop down list and scroll

DOES GPS WORKS IN THE FIRST VERSION OF IPHONE?

Similar Messages

Maybe you are looking for