Does GPU upgrade makes Flash Pro Cs6 faster?

Hi,
I have been using Flash Pro cs6 for character animation and when i zoom in zoom out the response is slow and also when i am scrolling to may timeline.
I have lots of symbols and tweening.
I notice that when I use the pc in the office its much smoother so i am planning to upgrade my own pc at home.
I have:
Amd Phenom II X4 840
8 gb ram
ATI Firepro v4800
I have a limited budget so i am thinking if i upgrade my GPU with Asus GTX strix 960 2gb, will it solve the issue?

No. GPU acceleration is only used on playback of published files and for video decoding. Your main processor is the bottleneck here.
Mylenium

Similar Messages

  • Flash Pro CS6 & CreateJS - Prevent looping

    I've recently upgraded to Flash Pro CS6 because of the toolkit for CreateJS.  I've already successfully exported a few simple, slide by slide animations.  I was surprised to see them working in all modern browsers, not just Firefox and Chrome.  The only issue I have is that there doesnt seem to be much ActionScript support.  I'm trying to have my frames play through once, without looping through infinity.  I've tried seaching the API for an equivalent to stop(); but diddn't find anything.  Is there a built in funtion for this, or should I be using another API like jQuery?

    If you want to stop the main timeline looping there's a checkbox in the toolkit publish settings.
    If you want to stop individual clips then you can use js
    /* js
    stop();
    see http://www.adobe.com/devnet/createjs/articles/using-flash-pro-toolkit-createjs.html for more info

  • Adobe Flash Pro CS6 Doesn't make smooth curves

    He guysI've recently upgraded from Flash Pro CS5 to Cs6 but I've got to a weird problem.
    I can not use pen tool to make smooth curves.
    This is a recording from the problem:
    any ideas?
    Thank in advance

    Adjust your drawing preferences as well. If it recognizes shapes/lines/etc it will try to optimize it.
    Here's a CS5.5 panel but CS6 shouldn't be too far off:
    If it's told to recognize any straight lines or shapes, you start to get those angled/straight lines.

  • Flash Pro CS6 to HTML5 Conversion

    I purchased Flash Pro CS6 yesterday and it does not convert my Flash file to HTML5 Correctly.  It converts everything except the Action Script.  I have contacted Tech Support and they have escalted the issue, but they are telling up to 96 hours.
    The website is www.davidhornbrook.com
    When I try to convert that page (the FLA file) it converts the bottom part, his logo, and the david dropping down the side.
    It does NOT convert the top menu items OR hte drop shadow behind the logo (which is all Action Script3).
    Can someone help me?
    I have the FLA files thast I can send to you / post if that helps.
    BTW when I convert it to SWF it works fine, just not when I export it to HTML5.

    Hello ChadXSO,
    The 'Help' offered to you so far has been, as far as I can tell, no help at all.
    I've been ploughing through an old .fla trying to make a conversion.
    Nothing complex, no animations.
    6 hours later, I've part of it running, not working, just not crashing.
    It's all script, so if CreateJS doesn't convert Action Script it's producing a very good pretense of doing so. The converter does appear to be looking at the AS, since if I change the AS the output changes.
    However, I have to edit the js, every time I publish, to prevent the HTML from looping. From time to time it throws a Line 77 error, claiming that there is an undefined .str in a non-existant .jsfl file (non-existant in that Windows can't find the file).
    I produce technical anims for my students in Flash so I'm none too pleased for the option for them to view them on-line to be taken away.
    Unless Adobe produces a working conversion tool 10 years of my work is going down the toilet. There will be thousands(?) of .swf creators in the same position.
    If CreateJS is the best Adobe can manage, at this rate, I won't live long enough to convert a single .fla.

  • How to install latest AIR SDK (13 or 14) in Flash Pro CS6?

    Hi, I'm using Adobe Flash Pro CS6 on Windows 7 64-bit and I wanted to add latest Adobe AIR SDK, either 13 or 14, but non of them is seen as a valid SDK by Flash.
    I've tried downloading two possible SDKs (SDK & compiler and SDK without compiler) from here: Download Adobe AIR SDK (version 13) and here http://labs.adobe.com/downloads/air.html (version 14). Each time I copied the extracted SDK folder to my Flash CS6 folder where default 3.2 and 3.4 SDKs are located. After that I open Flash, then Help > Manage Air SDK, click on " + ", browse for the new folder, and all I get is "The selected folder does not contain a valid AIR SDK" warning message. It all looks the same with all four SDKs I downloaded!
    Not long ago I added AIR 4.0 without any problems. What am I doing wrong? Is new SDK Flash CC only or what?

    What are you naming the folder?
    Just as a general tip, since many applications (Flash CS4, 5, 5.5, 6, CC) you can save some space by only putting the AIR SDK in one place. Since CS6 and CC have "Manage AIR SDK" in their settings you no longer need to locate that folder like 5.5 which requires you to overlay the AIR 2.6 folder. So save some space and put it anywhere out of the way, out of the Flash folder. I have multiple drives and I have lots of SDKs installed at root on my E:\ (E:\SDK\AIR, E:\SDK\JDK, E:\SDK\Android, etc). I then just go in the help panel like you do and point CS6 and CC to E:\SDK\AIR and they work perfectly fine with the latest SDK released recently.
    Are you updating Flash Player to 13 as well?
    Last, do not download the Flex version for Flash. Flex is for Flash Builder if you intend on using Flex (it is different than Flash).
    Do not get this:
    You want the SDK from the big orange buttons above this warning.

  • Back button doesn't work in Flash Pro CS6 Simulator (ADL)

    Hi everyone. I'm testing Flash Pro CS6, and I've noticed the Back button is not detected in my Android app when testing in ADL (Control / Test movie / In ADL Mobile).
    When I try to select the option Device / Back (Ctrl+B) in ADL, it just doesn't do anything (I have a KEY_DOWN event listener which looks for the keycode Keyboard.BACK). In a real Android device, it works, but not in the "test movie" window (ADL). In CS5.5, the Back button always worked in ADL.
    Also, in the new Simulator window which comes up when "testing movie", there are "Menu", "Back" and "Search" buttons for easier access. Well, that Back button doesn't do anything, either.
    Does anyone know what's happening?
    BTW, I don't find the "Simulator" window too useful for my purposes. How can I disable it, so it doesn't automatically come up?
    Thanks!
    Edit: Well, it seems the KEY_DOWN event listener doesn't work for any key, not only the Back button.

    WHOWWW...
    suitable for Flash Player 11.6
    Back that down to as low a version as possible... 10 or so if possible.
    My advice.... never... ever target the latest version of plugin... most users will NOT have that plugin installed.
    Back it down and if that doesn't work, post a link to the actual Web page.
    Best wishes,
    Adninjastrator

  • BUG - saving with both flash pro CS6 and CC causes library symbol names to change

    Concise problem statement:
    If you save with flash pro CC and then save with CS6, in the library panel, symbol names are changed.
    Specifically, pipes | and trailing spaces ("|Divider", "Divider ") get replaced by escape sequences ("&#124Divider", "Divider&#032" ...) Ampersands & and number signs # also get replaced, such that symbol names grow exponentially if you continue to save with both flash pro CC and CS6 ("Divider&#032", "Divider&#038&#035032", "Divider&#038&#035038&#038&#035035032" ...) This makes it difficult to transition a team from CS6 to CC.
    Sometimes, the original-name symbol remains, and an escaped-name symbol is also created. In this case, the children are removed from the original-name symbol, so it doesn't render anything to the screen; a mysterious, silent failure.
    Steps to reproduce bug:
    1. Create a library symbol named "|", save an xfl with flash pro CC, and close.
    2. Open, save, and close with flash pro CS6.
    3. Open, save, and close with flash pro CC.
    Results:
    A library symbol named "&#124".
    Expected results:
    A library symbol named "|".
    I submitted this bug with the bug form, and also with adobe bugbase (in case it isn't obsolete) - I'm just trying to maximize my chances of getting a fix.  Has anyone else encountered this bug?

    Hi,
    We are aware of this issue and its open for investigation internally. This issue is observed when you have certain special characters in your symbol names and try to open that file in Flash CS6. This happens due to a change in the way symbol naming is handled in Flash CC and in Flash CS 6.
    As a workaround, request you to use only Underscore or Hyphen as special characters while naming symbols or library layers etc.
    We shall update you as soon as this has been fixed.
    Thanks,
    Nipun

  • Lost cd for student edition flash pro cs6

    lost cd for student edition flash pro cs6, will "student serial" work with ADOBE's download/retrieve programs page?
    Thanks all

    Yes it should work, make sure to download correct version and language.
    Download CS6 products

  • Flash Pro CS6  Update menu greyed out + AAM fail,supressed by the Admin - Win7-64

    Hi,
    I want to update Flash Pro Cs6 (PC Win7 64bit) to Update2.
    However, the menu Help>Updates is greyed out.
    The Update2 AMM patch installer says "updates could not be applied. Contact your system Admin. Updates have been suppressed by the Admin"
    before starting.
    This seems to point towards a privilege issue but, I have tried to :
    run Flash as admin, run the updater as admin, install flash logged in as admin and updater logged in as admin,
    without any luck....
    This is the install log summary:
    -------------------------------------- Summary --------------------------------------
    - 0 fatal error(s), 0 error(s), 4 warning(s)
    WARNING: DS013: Payload {7EABC54B-02C3-4DA1-9EB4-974CE7414066} AdobeHelp 3.4.0.0 is already installed and the session payload {D38116C8-C472-4BB0-AD6F-0C1DD1320D1D} AdobeHelp 4.0.0.0 has no upgrade/conflict relationship with it.
    WARNING: DS013: Payload {1A1E5FF9-D0FD-42A3-8E18-E5E7E95E1AB4} DynamiclinkSupport 5.5.0.0 is already installed and the session payload {DE88AA40-6766-43D3-A755-8FC374B3D2C3} DynamiclinkSupport 6.0.0.0 has no upgrade/conflict relationship with it.
    WARNING: DS013: Payload {A8798E04-96FF-4564-9157-0D4C89CB794C} DynamiclinkSupport 5.0.0.0 is already installed and the session payload {DE88AA40-6766-43D3-A755-8FC374B3D2C3} DynamiclinkSupport 6.0.0.0 has no upgrade/conflict relationship with it.
    WARNING: DS013: Checking payloads upgrade/conflict relationships : Failed with code 1
    Cheers,
    F.
    PS :
    sorry for cross post from this :http://forums.adobe.com/message/4793645#4793645
    Just noticed this was the dedicated forum for install issues.

    Manually update Creative Suite  6 products
    Go to the Adobe.com Product updates site and choose the update you want to download.
    When the download completes, start the update by double-clicking the Set-up.exe (Windows)
    Prompted to shut down conflicting applications, do the following:
    Windows
    Right-click the taskbar and select Task Manager.
    Select the Processes tab, select a conflicting process, and click End Process.
    Repeat for any additional conflicting processes.
    Check to see if the update downloaded successfully.
    \Users\[username]\Local\AppData\Adobe\AAMUpdater\1.0\
    Sarika

  • Flash Pro CS6 iOS Native Extension Problem

    I am trying out flash pro CS6 new features.
    The most important one being ANEs [native extensions].
    in flash builder 4.6, when using an ANE for ios, it is sometimes required to put the ios5 SDK location [ -platformsdk  in ADT].
    This is completely missing in Flash Pro CS6 IDE, any way around that?
    [for the info on including the ios5 sdk check:
    http://help.adobe.com/en_US/flex/mobileapps/WSe4e4b720da9dedb5-4aefe03513238d8a1b8-8000.ht ml]
    Thanks.

    Uhmm, i'm doing a kind-of-360º-panorama-app and we need Gyroscope and Ad-hoc / AppStore distribution. And i've tried to get an answer of any kind from guys on Adobe on their AIR facebook fan page and here.
    SHould we write our own gyroscope ANE?, have any of you succesfully compiled ad-hoc or app-store with Ketzler Euler Gyroscope ANE?
    http://www.ketzler.de/2011/11/adobe-air-gyroscope-native-extension-with-euler-angles-roll- pitch-yaw-for-ios/
    regards.

  • Error to Install Flash Pro CS6 - Mac

    Hello, I have a Macbook Pro 2011 (with 4GB RAM) with OSX 10.8.2
    I signup the trial of Creative Clould and I am some problem to install Flash Pro CS6.
    I install the Flash from the installer of Creative Clould and I select the Flash Pro CS6 and began to download.
    When finish download and start instalation I insert my password of my user on OSX. Then began the instalation.
    When arrive 93% the system freeze and I need to turn off my macbook. I try already two times.
    After turn on again the macbook when I try to run Flash Pro CS6 shows me a window with Error 11. And then I need to remove the software. from my Macbook.
    Does anyone knows what is happening? I googled for error 11 but did not found any anwser for that.
    I download the Adobe Muse, and do not have problems to download/install from Creative Clould.
    Can you help me?
    Regards.
    Daniel

    Please follow this process before installation.
    1. Close all the application running on your system.
    2. Update latest flash player.
    3. Delete the Flash prefrence in your system.
    4. Install CS 6 after all these process
    Please let me know whether its working.

  • Flash Pro CS6 - not enough JVM memory - change 128 to 256, flash doesn't start.

    Hi,
    working on very large projects, I often get the "flash ran out of memory for the jvm" error.
    Restarting flash does the trick for another couple of hours, until I get that error again.
    It opens the jvm.ini file to let me increase Xmx memory value.
    I change it from -Xmx128m to -Xmx256m
    I restart flash, get the error: "Error initializing Java Runtime environment. You may need to reinstall Flash"
    I change it back to -Xmx128m, and flash starts again.
    But obviously, I again get the "not enough memory" error.
    Am I doing something wrong?
    Also,
    after installing Flash Pro CS6, previously installed Flash Pro CS5.5 does not start, gives me the JVM initialization error all the time, regardless of which Xmx value I put for CS5.5

    back to square one again. The error message just popped up. So annoying.
    update:
    I removed some of the images I embed using the '[Embed tag'. And now it publishes again without the error. Weird because the published swf is only 1.8MB. Nothing crazy. So the problem seems related to embedding images using the [Embed tag...
    update 2 / FIX:
    Instead of using the embed tag to embed images I now have an 'assets' folder that I add to the AIR project (publish settings) that contains my images. Then I load the various images using the Loader. After an image is loaded I convert it to a Texture to use in Starling like so:
    var bitmap:Bitmap = new Bitmap(new BitmapData(currentBigTextureLoader.width, currentBigTextureLoader.height, true, 0x00000000));
    bitmap.bitmapData.draw(currentBigTextureLoader);
    bigTextures[aBigTexturesToLoad[nCurrentBigTextureToLoad]] = Texture.fromBitmap(bitmap);
    You can then use these Textures to display an image in Starling like so:
    var base:Image = new Image(bigTextures["CollectionBase"]);
    Bit of a workaround but al least I don't get the Java Error anymore

  • Flash Pro CS6 can't see a font Flash Pro CS5.5 CAN?

    I just downloaded and installed the trial for Flash Pro CS6 so that I can use native extensions when exporting to iOS.  When I open my project, the "Font Mapping" pannel opens up and complains that "the document contains one or more fonts currently not available on your system".  The font is installed.  When I open the project in CS5.5 there is no issue.
    I have tried delete to the fontlist.txt in the configuration folder but that didn't work ...
    Any ideas?

    Hi,
    Could you try and recreate the whole of your preferences folder (and not only your fontlist.txt file) to see if it makes any difference?
    Here's how you do it:
    1. Launch apps
    2. Press Ctrl + Shift + Alt immediately before launching the first screen
    3. Pop up would appear to delete the prefrences
    4. Select  yes  from pop up
    5. launch again.
    Regards,
    Suhas Yogin

  • Why isn't the Adobe Exchange Panel opening in Flash Pro CS6?

    It says it's installed but when I go to Window>Extensions>
    and then there is nothing, no other menu to go from.

    Hi HunterOSx and Svagers,
    How did you install the Adobe Exchange extension?
    I would recommend downloading the latest updates for Extension Manager from here:
    http://www.adobe.com/exchange/em_download/
    ...and downloading the latest Adobe Exchange ZXP from www.adobeexchange.com (it was updated on Friday). Make sure that you open the ZXP with Adobe Exchange CS6 for it to be available in Flash Pro CS6. If you also have Extension Manager CS5 installed, it's possible that you've accidentally installed the panel into Flash Pro CS5.
    Let me know how you get on.
    Best wishes,
    Fraser

  • Compiling Issue in Flash Pro CS6

    Hi,
    When I try to test my project (CTRL + Enter), it displays a blank window if publication target is superior or equal to 10.3, in Flash Pro CS6, either AS2 or AS3. Even if it's a new empty project with just a background color set and a trace("ok"); on the first frame, it does strictly nothing. White and no message in the debug console.
    If I change the target to 9, it works, although the scene color is still not displayed.
    In both cases, when I open the generated swf file directly from my explorer (Windows 7), it works, although the scene color is not displayed.
    Worked perfectly until now, can't remember of a recent update but maybe the last one did that.
    Does anyone know how to fix that ?
    Thank you !

    Hey,
    I've solved my problem installing the Flash Pro CC trial version.
    I wanted to test if it worked under CC, but it seems to have solved the problem in Flash CS6 too. Everything is back to normal.
    I guess we can say this is a solved issue, even if I don't know why. Maybe reinstalling Flash CS6 would have done the trick too. Can't tell.

Maybe you are looking for