Does GRC AC 5.2 supports multiple server nodes

Hello Experts,
Does GRC AC 5.2 is supported with multiple server nodes.
Thanks
Davinder

Thanks once again Harleen,
For AC 5.2 i will raise an SAP OSS message and share the results with community.
For AC 5.3, we have configured SAP logger and make neccesary changes in NWA. But log information over here is not as detailed (background job information is missing) as we get in RAR -> Background Jobs ->View Logs.
I have generated another thread for this issue (GRC AC 5.3 Logging strategy in multi server nodes), would appreciate if you can show some light on this issue
Thanks
Davinder

Similar Messages

Does the sender SOAP adapter support multiple operations per interface

Hi guys,
does the sender SOAP adapter support multiple operations per interface? (interface type of 7.1)?
Thanks,
Andrzej

theoretically Yes.
Do have a look into this when you get time
/people/shabarish.vijayakumar/blog/2010/09/08/service-interface-and-multiple-operations--is-it-just-an-hype

Multiple Server nodes in Java Instance

Hello Experts,
We have NW 700 SP17 Java system running with 5 server nodes. Would appreciate, if you clarify following doubts:
1. How can we check which user has landed up into which server node.
2. Is there any possibility of check logs (like defaulttrace,etc) for all the server nodes from a single location (like NWA).
3. How can we check the load on each of the server node.
4. Where can we find documentation on configuring and operating Java instance with multiple server nodes.
Thanks
Davinder

1. How can we check which user has landed up into which server node.
Ask the user to execute this: javascript:document.cookie
while they are in the Java pages.
2. Is there any possibility of check logs (like defaulttrace,etc) for all the server nodes from a single location (like NWA).
- Yes, SAP LogViewer should give you that options
3. How can we check the load on each of the server node -
- Consider configuring Solution Manager Diagnostics, is it very nice tool for Java Load Monitoring
4. Where can we find documentation on configuring and operating Java instance with multiple server nodes
- If you asking about how many nodes requires on a java instance, you might want to use the SAP Quick Sizer to size your systems, then it will give you total Memory it requirsts then you need to divide that by 2.5 GB (64 bit OS) or for 32 bits they recommend you not to exceed your heap size beyond 1 GB.
Added Nodes is very simple via Configtool, then you might have to setup your server with same settings as your previous nodes.
Kumar

Does LabVIEW DSC 8.5 support Windows Server 2008?

Hi,
I am developing a SCADA system using LabVIEW DSC 8.5. Apparently, customer wants the Server Computer to be latest Windows Server 2008 operating System.
But the Release and Upgrade note specify that DSC Module does not support Windows NT/Me/98/95/Server 2003. (System Requirement section)
Does it support Windows server 2008?
Any feedback most appreciated.
Message Edited by Vsh on 09-28-2009 08:56 AM

Hi Vsh
Sadly no version of LabVIEW (and therefor no modules like DSC either) officially supports Server 2008. That has however not stopped people from trying and I've seen both cases were it has worked fine and cases were it has not worked. This thread might be of interest to you.
Best Regards
David
NISW

Options to change jdbc adapter for multiple server nodes without flag in db

Due to load, we are about to add a new server node for additional J2EE memory within XI. Reading the notes and discussions about this, it is apparent that the server nodes don't distinguish between themselves in terms of polling. i.e. If we have a jdbc channel that polls every 24 hours, and you have 2 server nodes, it polls twice at the approximate same time every 24 hours.
Question I have is how have people got around this issue where you cannot update the information to say that the data has been read. i.e. Our scenario is reading the complete table contents every day and sending all information to another system.
Hence, if we have 2 server nodes, we will execute this message twice. When we add a 3rd server node, we will have 3 messages sent at the same time per day.
One complicated option (I think) is to use an application client on XI to schedule a job which calls an ABAP Proxy on the integration client which starts off a ccBPM which in turn reads the database hence single threading this process.
Anyone got any sensible ideas?
Regards,
Matt
ps. Ignore the obvious design flaws with this approach as there is no other option in this scenario due to restrictions in the end system.

Hi Matt,
Extending Bhavesh's point, and assuming the receiver system is SAP, then why not schedule your calls on the receiver system, as the consumer of the data.
The report name and optionally a date range can be written from the RFC via XI to a separate table in the database. The select statement can join the table to the existing view. The update statement can update the new table as your source table or view is obviously out of bounds.
The advantage of this approach is that it results in a classic request response where XI is transparent.
We are planning to do something very similar in our own project.
Best Regards,
Bill

Does XI 3.1 SP2 support Windows Server 2008 Release 2?

In the supported platforms guide for Business Objects XI 3.1 SP2 it lists support for Windows Server 2008 but I'm curious if it will support 2008 Release 2???

2012 R2 is not mentioned (that article is over two years old),
Would be kinda hard to mention a non-existent operating system in a 2 year old blog post, eh?
Maybe the Blog entry could be updated?
There's no need to update the blog post once you understand the specifics of the update. The update introduces NEW functionality required for ALL operating systems from Windows 8 forward.
Also, maybe you shouldn't be so literal in your search efforts? :-) Think outside the box a bit, eh? Understand *why* the update was created. What does the update do that makes WSUS v3 work for Win8/WS2012. Is there some reason that wouldn't work for subsequent
operating systems? You didn't have the update anyway, did it never cross your mind.. "Hey.. maybe I should do this... anyway?"
Nevermind the hundreds of conversations in this forum about KB2734608 and the dozens of times Win8.1 or WS2012R2 is mentioned in those conversations.
Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
SolarWinds Head Geek
Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
http://www.solarwinds.com/gotmicrosoft
The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds.

Does CME (Call manager Express) support a server based TAPI environment?

Thanks in advance if you can provide the document link to confirm this function.

Hi James,
Hope this link answers your question:
http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/tapi/developer/guide/tapidev.html
Kindly rate the post accordingly.
Regards,
Kevin Monteiro

GRC AC 5.3 Logging strategy in multi server nodes

Hello Experts,
We have GRC AC 5.3 SP6 and 5.2 10 landscapes and PRD system are running with multiple server nodes. SAP recomends to use SAP Logger instead of Java Logger in multi server environment, but i am not able to find out complete documentation on this.
Can someone please give pointers on configuring GRC logging in NWA - which all Categories needs to be defined,etc,etc.
And after this configuration, will we be able to see the logs of scheduled jobs with same details as shown in GRC --> Background Job -> View Logs.
Thanks
Davinder

Hello Harleen,
Thanks for your time. Here are my observations
1. When we have created categories and then deinfed Logging and Tracing (with Severity level ALL) in NWA - these entries have also been reflected in Visual Administrator -> Log Configuration.
2. We will have to restart SAP system after changing logging strategy from Java Logger to SAP Logger.
3. After this change and restart, only upcoming new jobs scheduled/run will be displayed in NWA, jobs ran in the past will never be displayed in NWA.
Severe Problems faced when checking logs through NWA:
1. Logs through NWA are not at all readble as one entry is displayed in one row, whereas checking logs in RAR - VIew Logs was very convenient (similar to reading a text file).
Is it possible to customize the display format of log files in NWA to something like text files,etc?
2. When we try to donwload the logs from NWA, server produces huge dumps files of size in GBs (hpfa files which are memory dumps) - and before this download is completed - server crashes after around 15 minutes of starting log downloads - no free space availbale as everything has been taken by these memroy dumps (around 7GB).
Any further pointers on handling GRC AC logs (multiple server nodes) in NWA would be highly appreciated.
Thanks
Davinder

Owb11gr2 dimension property: support multiple history loading

Hi all,
does anyone know how the "support multiple history loading" feature for dimensions in 11gr2 is supposed to work? I have a scenario here which I think this feature will be able to solve, but I encountered some warning messages upon using it. The warning messages complained of chunking enabled for some sources in the mapping but not enabled for other sources. I dont understand what this chunking warning is referring to, how can I get rid of these warning messages?
The scenario which I am trying to solve using this feature is:
I have a warehouse table called supplier that captures changes. Changes to suppliername in the sourcetable named supplier will end up triggering history capturing in this warehouse table.
Now assuming my warehouse supplier table only has this row:
suppkey | suppname | suppcode | supptype | suppnature | effectivedate | expirationdate
1 terry 123 A H 31-dec-2009 null
What happens is there are more than 1 change to the suppliername column for the same row in the source database, for instance:
update supplier set suppliername = 'james' where suppcode = '123'.
update supplier set suppliername = 'tom' where suppcode = '123'.
update supplier set suppliername = 'jason' where suppcode = '123'.
Thus the corresponding cdc change table/subscriber view will contain 3 UN/UU rows that correspond to the same row in the source table.
Now when executing the mapping, I want these 3 rows from the subscriber view to be loaded correctly into my warehouse table, triggering history capturing whenever needed.
Desired warehouse table state:
suppkey | suppname | suppcode | supptype | suppnature | effectivedate | expirationdate
1 terry 123 A H 31-dec-2009 1-jan-2010
1 james 123 A H 1-jan-2010 1-feb-2010
1 tom 123 A H 1-feb-2010 1-mar-2010
1 jason 123 A H 1-mar-2010 null
I tried doing so without enabling the "support multiple history loading" option but the end result was not totally correct. Anyone has any advice on this chunking issue?

Hi David,
yes it is just validation warnings. I tested the mapping and history capturing seems to be working according to what I had expected, but I am just worried that these warnings may pose problems in unseen circumstances.
And thanks for the link given. It describes perfectly the problem I had been facing when using owb10gr2!

Does Siebel Management Server supports multiple gtwy servers/siebelservers?

Hello,
Does Siebel Management Server supports multiple gtwy servers and siebel servers when running getservers.pl ?
Does Siebel Management Agent service run under windows 2008 OS?
Cheers
Kota

Hi,
In addition to making sure Agent Proxy on all AD FS servers is enabled, please also verify that the IIS 6 Management Compatibility and
IIS 6 Metabase Compatibility role services are installed. (Some AD FS 2.0 scripts depend on Internet Information Services (IIS) Windows Management Instrumentation (WMI) objects being installed.)
Here are two links for your reference:
Discovery Does Not Work in ADFS 2012 R2 MP
http://blogs.technet.com/b/omx/archive/2014/05/07/discovery-does-not-work-in-adfs-2012-r2-mp.aspx
http://scug.be/christopher/2012/03/07/opsmgr-scom-adfs-2-0-mp-discovery-issue/
Regards,
Yan Li
Regards, Yan Li

Does LabVIEW 2009 support multiple monitors?

Does LabVIEW 2009 support the use of multiple monitors for development? Screen real estate use in LabVIEW is difficult. It would help if the developer could use more than one monitor.
In LabVIEW 2009 can you pin certain items to appear or pop up only on a specific monitor?
Can you have Front panels only show up on one monitor and Block Diagrams on another monitor?
How is this done?

dbaechtel wrote:
Does LabVIEW 2009 support the use of multiple monitors for development? Screen real estate use in LabVIEW is difficult. It would help if the developer could use more than one monitor.
In LabVIEW 2009 can you pin certain items to appear or pop up only on a specific monitor?
Can you have Front panels only show up on one monitor and Block Diagrams on another monitor?
How is this done?
Not exactly like this, but LabVIEW VIs remember thier last location when saved and will come up at that positiont, unless that is entirely out of the current desktop in which case they will default back to the primary monitor.
Also VI server supports multiple monitors too by giving you back a list of monitor rectangles so you could do a little utility that runs in the background to do what you want. Most likely you will not like such a deamon that pulls your diagrams and panels around as you move them on your screen, but you can try it out.
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

Multiple server certificate support for the same proxy server

Does the SunOne proxy server allow multiple server certificates to be configured (for the same instance of the proxy server) and used when connecting to different external servers using https?
If not, which version / patch will enable this support and most importantly when?

No. It doesn't.
Must use multiple proxies on different ports or IP addresses.

Making a chat server that supports multiple clients!

This is what I got so far:
import java.net.*;
import java.io.*;
public class Server{
     public static void main(String [] args){
          ServerSystem ssys = new ServerSystem();
          ssys.ServerMethod();
class ServerSystem{
     static ServerSocket ss;
     public void ServerMethod(){
          try{
               ss = new ServerSocket(27700);
               boolean listening = true;
               for(;listening;){
                    ClientThread ct = new ClientThread(ss.accept());
                    ct.start();
                    ss.close();
          }catch(Exception e){
               System.exit(0);
class ClientThread extends Thread{
     ServerSystem ssys = new ServerSystem();
     ServerSocket ss = ssys.ss;
     public void run(){
          try{
               BufferedReader in = new BufferedReader(new InputStreamReader(ss.getInputStream()));
               PrintWriter out = new PrintWriter(ss.getOutputStream(),true);
          }catch(Exception e){
               System.out.println(e);
}3 Errors:
ClientThread ct = new ClientThread(ss.accept()); CONSTRUCTOR : CANNOT RESOLVE SYMBOL
BufferedReader in = new BufferedReader(new InputStreamReader(ss.getInputStream())); METHOD : CANNOT RESOLVE SYMBOL InputStream
               PrintWriter out = new PrintWriter(ss.getOutputStream(),true); METHOD : CANNOT RESOLVE SYMBOL OutputStream
First of all, how do I fix those. Second, am I on the right track for a server that supports multiple clients? Please help me with this.
Thanks!

well, since I feel kinda bad for just re-posting the link to the API docs previously posted by supermicus I shall elaborate - though, since my reading for comprehension skills are clearly lacking, I will not attempt to teach you to read.
This conversation should be held in the "New to Java Technology" forum, BTW.
Java derives a lot of its power from the huge library of classes that ships with it, which is called the API. These classes are grouped into packages roughly along functional lines, so you should expect to see some relationship between the classes found in a given package - the java.net.* classes all pertain to networking. The API documentation describes three things about each class - fields that are available, constructors that you can use, and methods that you can call. Basically, anything at all that you can do with a given class (ThreadGroup, for instance) can be found in the documentation for that class. Typically (for non-static classes), you call the constructor that seems most appropriate via the "new" keyword, and, using the reference returned from that, you call the method that does what you want. It's all outlined in the docs.
If you don't get what you need from the docs, then read the appropriate Tutorial (also in the list of links to the left of your screen) find the one on Threads and off you go.
I hope this helped.
Lee

HT201250 Hello i am using TimeMachine to back-up entire Mac image (data + system) on an usb-local drive. I would like (on top of it) add a specific plan to back up some files on a remote network drive. Does TimeMachine support multiple back-up plans ? How

Hello i am using TimeMachine to back-up entire Mac image (data + system) on an usb-local drive. I would like (on top of it) add a specific plan to back up some files on a remote network drive. Does TimeMachine support multiple back-up plans ? How ?

Time Machine is capable of backing up to multiple locations, and can be used to back up to both a local hard drive and a networked drive (provided that that drive is in or connected to a Time Capsule or another Mac that is sharing it over the network). The catch, though, is that you can't specify different things to back up to different destinations. Whatever you exclude from Time Machine backups is excluded from ALL backups, and whatever is included is included on all.
So, get a large enough drive that you can back up everything you want in all locations, or use something else for maintaining the network backup.
More information on these topics can be found here:
How do I set up Time Machine to a shared drive on another Mac?
How do I set up Time Machine to a Time Capsule or Airport Extreme?
"Rotating" Time Machine backup disks

Looking for a client/server that supports multiple protocol and delivery

Hi all, I don't know if this the right place to ask my question,here it goes.
I am looking to develop a client-server that supports multiple protocols such as HTTP, HTTPS etc. I am looking for a framework( i don't know if that is correct or I need some kind of web-service (soap etc)) that would manage connection, security etc. I would like to like to devote most of my time in developing business objects with multiple delivery mechanism such as sending serilized java objects, xml message or soap message, or in some case JMS message as well. So I need a client server that can come in via TCP/IP or HTTP or anyother industry standard protocol and I should be able to service him with pub/sub model and also request/response model as well.
I don't know if I had explained what I need, I would like to know what technologies I should be evaluating and which direction I should be heading... Also the server I'm developing should be free of Java constraints if needed...
Also this service is not webbased service as now but if need arises I should have a flexibilty to make them web enabled in future. Also I would like to work with open source webservers or appservers if I need

Inxsible wrote:I installed i3 - along with the i3status - which I still have to figure out. I am liking what I see as of now. It reminds me of wmii -- when I used it way back when. However I do not like the title bar. I would much rather prefer a 1 px border around the focused window.
"i3 was created because wmii, our favorite window manager at the time, didn't provide some features we wanted (multi-monitor done right, for example), had some bugs, didn't progress since quite some time and wasn't easy to hack at all (source code comments/documentation completely lacking). Still, we think the wmii developers and contributors did a great job. Thank you for inspiring us to create i3. "
To change the border of the current client, you can use bn to use the normal border (including window title), bp to use a 1-pixel border (no window title) and bb to make the client borderless. There is also bt which will toggle the different border styles.
Examples:
bindsym Mod1+t bn
bindsym Mod1+y bp
bindsym Mod1+u bb
or put in your config file
new_window bb
from: http://i3.zekjur.net/docs/userguide.html (you probably already found that by now )

Does GRC AC 5.2 supports multiple server nodes

Similar Messages

Maybe you are looking for