Does GW needs SP1 before upgrade to OES11.1

Currently GW 2012 on OES 2 (SLES 10 SP2)
Do I need to upgrade GW first to SP1 or OES2 to OES11 SP1
I hate the confusion with OES numbers for SP !!!
Seb

On 20.02.2013 03:36, deborahshields wrote:
>
> mrosen;2237005 Wrote:
>> On 19.12.2012 22:06, spgsitsupport wrote:
>>>
>>> Currently GW 2012 on OES 2 (SLES 10 SP2)
>>> Do I need to upgrade GW first to SP1 or OES2 to OES11 SP1
>>
>> Not necessarily first, but immediately afterwards. 2012 without SP1
>> doesn't work well on SLES11SP2 (which is the foundation of OES11SP1)
>>
>> CU,
>> --
>> Massimo Rosen
>> Novell Knowledge Partner
>> No emails please!
>> 'Untitled Document' (http://www.cfc-it.de)
>
> What about running GW2012 sp1 on OES11 that is fully patched, but not
> at sp1 ?
>
>
That should be fine, but do note that SLES11 without SP1 is or will soon
be unsupported, and receive no further patches.
CU,
Massimo Rosen
Novell Knowledge Partner
No emails please!
http://www.cfc-it.de

Similar Messages

Does it need effort to upgrade SSRS from SQL Server 2005 to 2014?

Hi,
i have a customer who wants to upgrade the their system. for SQL Server part, the current version is 2005, they want to upgrade to 2014. is it possible that don't change any code for SSRS? if have to change, what's the estimated effort? the total RDL files
are more than 200.

Hi dingsheng,
In this scenario, you don't need to change code for Reporting Services. Those reports can be still available. Please run SQL Server Upgrade Advisor on the report server computer to determine any issues that might prevent you from successfully upgrading.
For more information, please see:
Upgrade and Migrate Reporting Services
If you have any question, please feel free to ask.
Best Regards,
Simon Hou

The RFX before upgrade does not allow me to add items from catalog

hello gurus
I have a problem with the RFX, we did an upgrade to SRM7.0 from SRM5.0.
The RFX that existed before upgrade in the server does not allow me to add new items from catalog.
each RFx I created after the upgrade works fine.
My client needs to work with the RFx still open, add items and make bids.
I have reviewed the upgrade guide and found nothing regarding an update of purchasing documents.
I have
SRM 7.0 SPS03 EHP1
MDM 7.1 SP06
MDM catalog 3.0SP10

in SRM 5.0 the system was MDM catalog. Actually, after the upgrade , i have SRM7.01 with MDM catalog.
i donn´t know if it is about version, SP or compatability issue, but i believe the upgrade not affect the purchaser documents.
Those look as locked to modify. on tap Position, the buttom ADD LINE, only i can see Position, not anymore option like MDM catalog, free text.
it is a big problem, because the client has documents opened. i need to resolve this issue. Actually i am working in a sandbox system, but i afraid to have the same problem in PRD system after upgrade.
regards

Verizon, Does YOUR equipment need service and upgrade? Not OURS? Please Help

Hello,
I used to have a pretty stable dial-up, then DSL, then DSL enhanced connection. But late this summer, my service has gotten horrible. In the evenings, I can get disconnected every 1 to 2 minutes or even get disconnected when I am trying to reconnect from the last disconnect.
I have a new modem/router from Verizon and have gone through all the standard troubleshooting suggestions given on this site.
I then began sifting through these forums and then posting about my difficulties.
Through the last several months it seems as though more people are complaining about the frequent internet slowdowns and disconnects. We've all been walked through the same steps.
Finally we are being told that these problems are happening during "high-traffic" times on the internet and nothing else is said.
I recently saw a post where a customer said they were told by a Verizon service technician that the problems are because Verizon's hardware needs to be upgraded to handle the larger amount of internet traffic.
I have rebooted and reset my modem many times. I've restarted my computer, run cleaning programs, cleared the DNS folder, and defragged. I've even changed the phone and Ethernet cables.
Verizon,
Will you please work on solutions on your end instead of saying everything is on OUR end?
Thank you

We had escalated this previously for you and your post was copied to our private support board. Please refer all correspondences to there from here on out. You can easily get to the private support one of two ways. In the email you signed up for the forums with, you will receive a link to click on. Make sure you are already signed into the forums before clicking on this link. Another way of getting there is by clicking on your username anywhere you see it in the forums. This brings you to your account profile. Scroll down to the section labeled "My Support Cases" . In there you will see the link to your case.
Anthony_VZ
**If someones post has helped you, please acknowledge their assistance by clicking the red thumbs up button to give them Kudos. If you are the original poster and any response gave you your answer, please mark the post that had the answer as the solution**
Notice: Content posted by Verizon employees is meant to be informational and does not supersede or change the Verizon Forums User Guidelines or Terms or Service, or your Customer Agreement Terms and Conditions or plan

Do I need to upgrade from tiger to leapord before upgrading to snow leopord?

Do I need to upgrade from tiger to leapord before upgrading to snow leopord?

No. You can update directly to Snow Leopard.
How to Install OS X Updates Successfully
A. Repair the Hard Drive and Permissions:
Boot from your current OS X Installer disc. After the installer loads select your language and click on the Continue button. Then select Disk Utility from the Installer menu (Utilities menu for Tiger and later.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger) and/or TechTool Pro (4.5.2 for Tiger) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
B. Make a Bootable Backup Using Restore Option of Disk Utility:
Open Disk Utility from the Utilities folder.
Select the destination volume from the left side list.
Click on the Restore tab in the DU main window.
Check the box labeled Erase destination.
Select the destination volume from the left side list and drag it to the Destination entry field.
Select the source volume from the left side list and drag it to the Source entry field.
Double-check you got it right, then click on the Restore button.
Destination means the external backup drive. Source means the internal startup drive.
C. Important: Please read before installing:
If you have a FireWire hard drive connected, disconnect it before installing the update unless you will boot from this drive and install the update on it. Reconnect it and turn it back on after installation is complete and you've restarted.
You may experience unexpected results if you have installed third-party system software modifications, or if you have modified the operating system through other means. (This does not apply to normal application software installation.)
The installation process should not be interrupted. If a power outage or other interruption occurs during installation, use the standalone installer (see below) from Apple Downloads to update. While the installation is in progress do not use the computer.
D. Download and install update(s) if updating:
Use Software Update, or
Download standalone updater(s).
E. To upgrade from an earlier major version:
Purchase the requisite installer package (Snow Leopard for example.)
Boot from the installer DVD.
Choose the install option:
None required for Snow Leopard.
Archive and Install for versions prior to Snow Leopard.

Precaution(for POSDM) before upgrade BW, current Ver. of POSDM is 7.01 target is 7.01 SP1

Hi Team,
Please let us know the precaution and things that we need to take care before upgrading the POSDM from:
Current7.01 Version
New Version-7.01 SP1
I would appreciate if some one can provide the check list ASAP.
For information we are using the below scenario in POSDM:
1.We are using on WPUBON idocs and sending the same to ECC
CAN someone reply on this.
Thanks
Message was edited by: nishant gupta

Hello,
What is this component ?
3WETN492 Required Add-On component "POASBC" rel."100_730" is not installed
Thanks

Does my Macbook Pro need a RAM upgrade?

Hi. I own a Late 2011 MBP and its been acting a little slow lately. its not really slow, but the booting does take longer than before. and applications take a little more time to open for the first time than before. since i need to run quite a bit of heavy applications for my college use, i need to make sure it stands up for it.
i just need to know if its time for a RAM upgrade for my MBP? Will it really make a difference?
Also will it support an 8+8 GB RAM upgrade, or should i go for a 4+4 GB RAM upgrade instead?
is it possible if i can do it by myself? or will need to go to a store?
And just to confirm, I'm getting like a 5hr battery backup on this pc. is it normal or lesser than usual?
Current Specs:
Processor 2.4 GHz Intel Core i5
Memory 4 GB 1333 MHz DDR3
Graphics Intel HD Graphics 3000 384 MB
Software OS X 10.9.4

psilovefood wrote:
Hi. I own a Late 2011 MBP and its been acting a little slow lately. its not really slow, but the booting does take longer than before. and applications take a little more time to open for the first time than before. since i need to run quite a bit of heavy applications for my college use,
Ram may not be the problem. Look at this article for possible solutions:
http://www.thesafemac.com/mpg/
i just need to know if its time for a RAM upgrade for my MBP? Will it really make a difference?
Not necessarily.
Also will it support an 8+8 GB RAM upgrade, or should i go for a 4+4 GB RAM upgrade instead?
It will support both configurations. How often do you exceed 4 GB of RAM usage. Ram not used is RAM wasted. 16 GB might be necessary. What are the most resource hungry applications that you use?
is it possible if i can do it by myself? or will need to go to a store?
User installation is easy. No need for the store to do it. Look in your users manual for instructions.
Ciao.

I'm trying to back up 10.6.8 (snow leopard) and all my files before upgrade to Mavericks. I have an old but sturdy external hard drive...how many GB available will I probably need to back up the whole thing? thanks!

I'm trying to back up 10.6.8 (snow leopard) and all my files before upgrade to Mavericks. I have an old but sturdy external hard drive...how many GB available will I probably need to back up the whole thing? thanks!

You will need a separate partition unless you plan to use the entire drive. You will need an amount of space somewhat larger than the total space now used on your startup drive. If you select the startup drive's Desktop icon, then press COMMAND-I to open the Get Info window. Used space will be shown in the topmost panel. Add a GB or two to that number to determine how much space you'll need for the backup.
Do not backup on a drive that has any files you want to keep. You can make a bootable backup as follows:
Clone using Restore Option of Disk Utility
1. Open Disk Utility in the Utilities folder.
2. Select the destination volume from the left side list.
3. Click on the Restore tab in the DU main window.
4. Select the destination volume from the left side list and drag
it to the Destination entry field.
5. Select the source volume from the left side list and drag it to
the Source entry field.
6. Double-check you got it right, then click on the Restore button.
Destination means the external backup drive. Source means the internal startup drive.

I'm running on Mac OS X 10.5.8. Do I need to buy snow leopard first before upgrading to Mountain Lion?

I'm running on Mac OS X 10.5.8. Do I need to buy snow leopard first before upgrading to Mountain Lion?

Make sure your machine meets the minimum system requirements:
http://www.apple.com/osx/specs/
Although it says 2 GB RAM is the minimum, it's generally recommended to have at least 4 GB unless you only use your machine for "light" use (no movie editing/burning, etc).

I have a mac, In"Design CS 5.5, a design gave me a file said it was CS 6, does not open in CS 5.5..Message says "Please upgrade your plug-ins to their latest versions, or upgrade to the latest version of Adobe InDesign." I think I need to buy upgrade fro

I have a mac, In"Design CS 5.5, a design gave me a file said it was CS 6, does not open in CS 5.5..Message says "Please upgrade your plug-ins to their latest versions, or upgrade to the latest version of Adobe InDesign." I think I need to buy upgrade from 5.5 to 6. I found one on NextTechDirect for $150 to download. they are not a scam according to "scamadvisor.com."
When I drag the InDesign file that that was supplied by another designer who said it was CS 6 onto my desktop it says CS 5.5. Is that because I only have CS 5.5?
Should I buy this
Adobe InDesign CS6 Upgrade from CS5.5 WIN/MAC [Download] from Next tech....it is obviosly higher on the adobe site and alot of other places?

No one is likely to recommend where you buy your software from other than Adobe in these forums... not so much because of support for Adobe, but mostly because of lack of support/knowledge of any third party vendors. I only know from experience that when you invest in bargain pricing you usually get what you pay for.

IPhoto on my MacBookPro does not open - shows a box "Aperture library needs to be upgraded". I do not have Aperture installed and I am not interested to do so.

On my MacBookPro - After updating iPhoto 11 to version 9.3.1, it does not open and shows a box "Aperture library needs to be upgraded" with choices to update or Quit. If I quit it closes iPhoto - if I try to update it goes to the App Store and requires a purchase of Aperture - I do not want to purchase Aperture.

If you tried the First Aid Tools without success, make a backup of the iPhoto Library and rebuild with iPhoto Library Manager as described by Terence Devlin:
uprgraded to yosemite all good but iphoto crashes every time I attempt to upgrade the photo library
Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Download iPhoto Library Manager here: http://www.fatcatsoftware.com/iplm/

Does airport express stream directly to wireless speakers or does it need to be connected through an audio cable to an amplifier before the speakers

Does airport express stream directly to wireless speakers or does it need to be connected through an audio cable to an amplifier before the speakers?

I got an additional question bout this topic:
is it possible to use both at the same time? in my case cable-connected speakers in the living-room and an Airplay-speaker in the bathroom and/or kitchen?
so I select the Airport Express as Airplay-Output on my iPad and from there it's shared via cable AND wireless? this would solve the problem of being able to only select ONE Airplay-Output on my iPad at the same time...

Can one upgrade from CS5.5 to CS6 as a Retail Product or does one need to do it as a Volume License?

Can one upgrade from CS5.5 to CS6 as a Retail Product or does one need to do it as a Volume License?

Well, depends on what your CS5.5 actually is. If it came as a volume license, the upgrade terms would be determined by the specifics of the volume licensing model chosen... Anyway, that's way too specific. Contact sales support by phone or web chat to haggle things out.
Mylenium

I have several macs with Intel core duo 2 operating systems. All are running os x10.6.8. Is it necessary to upgrade to Lion before upgrading to mountain lion when it comes out this summer? Do I need to have the "base" version of 10.7?

I have several macs with Intel core duo 2 operating systems. All are running os x 10.6.8. Is it necessary to upgrade to Lion before upgrading to Mountain Lion when it appears this summer? Do I need to have the "base" version of 10.7 first?

This is unknown, it will be up to Apple and AFAIK they haven't announced that yet.

I currently have OSX 10.4.11 and need to upgrade my software. I do not have Time Machine yet. My processor is an intel Core 2 duo. Do I have to upgrade to snow leopard 10.6.8 before upgrading to Mavericks?

I currently have OSX 10.4.11 and need to upgrade my software. I do not have Time Machine yet. My processor is an intel Core 2 duo. Do I have to upgrade to snow leopard 10.6.8 before upgrading to Mavericks?

Assuming your computer has the minimum system requirements yes, upgrade to 10.6.8 and then open the Mac App Store and upgrade to Mavericks. You can only get SL 10.6.x from Apple's online store, it is $20. Prior to upgrading to 10.6.x get an external HD and use a utility such as Carbon Copy Cloner or SuperDuper and make a bootable clone of your system to safeguard all of your valuable data. In the event you have a problem the backup will be invaluable!!!!!
Considering your computer is at best a 2007 iMac I would STRONGLY recommend upgrading your RAM to 6GB, the maximum a 2007 machine can accommodate. You can buy this from either Crucial or OWC (www.macsales.com).
Another option is due to the age of your computer is considering buying a newer machine.

Does GW needs SP1 before upgrade to OES11.1

Similar Messages

Maybe you are looking for