Does hide a frame means do not run/execute that frame(and its query) ?

Hi Everyone
Does hide a frame means do not run/execute that frame(and its query) ?
Thank you
Bryan

No. It means setting the Format Trigger of it to reurn FALSE, so it won't display.

Similar Messages

If you're NOT running Aperture 3.6 and want to update to 10.10.3 - read this FIRST.

If you’re NOT running Aperture 3.6 and want to update to 10.10.3 - read this FIRST.
In this personal scenario, I used a Mavericks (10.9) test hard drive to see what would happen if I updated to 10.10.3. No photos were harmed in the making of this post. I have full redundant back-ups of everything as should you before attempting ANY OS update. There simply is no excuse not to back up and keep your personal data protected in this day and age.
Now that’s out of the way…
If you’re not running Aperture 3.6 (which I believe is only available if running 10.10.2), updating to 10.10.3 will disable any version of Aperture below that and it CANNOT be updated or found on the App Store, or downloaded from anywhere else. Both the Aperture and iPhotos icons in the dock will have a white circle with a line going through it.
If you click to open Aperture, the computer will prompt you to update to the latest version because the current version is not compatible with Yosemite. After you acknowledge that, it sends you the the App Store where you will be met with a message that states “Item not available”. It also no longer appears in your purchase history so you can’t update it from there either!
You’re now forced to use the new Photos app.
Upon it’s it’s first launch, the Photos app will create a new library for itself and migrate/duplicate all Aperture photos into it. Effectively doubling the disc space used by your pictures...
This behavior apparently does not happen going from 10.10.2 to 10.10.3. In this latter scenario, Photos still uses the Aperture library and creates a smaller Photos library migrating only the metadata it seems. The actual photos are still referenced from the Aperture library and you can continue to use Aperture (3.6) if you choose. The libraries are NOT unified though. Changes made in one will NOT be reflected in the other.
In other words, you cannot leap-frog update if you want to continue using Aperture.
The 10.10.2 Combo Update “may” solve this problem but I have not tested it. Here is a link if you’re feeling brave. https://support.apple.com/kb/DL1786?locale=en_US
Here are some screen-shots.

I had been trying to download 7.0.1 with Firefox 3.6. Just would NOT download. Well, I opened another browser, Safari, went to the download page, and the download worked. Who knew?
All is well now.
Thanks for the reply.

What does the exclamation point mean next to a song that is unchecked?

what does the exclamtion point mean next to a song that is unchecked?

If you hover over the exclamation mark (or you may need to click on it, I can't remeber), it should tell you. Usually, it means that the original file (for that song) cannot be found, either because it has been moved, renamed or deleted.

HT4623 i am updating to ios 6.1 but i dont want immediatly i have shut down my iphone by holding sleep wake button and home button and cracks from that time and its not restarting

i am updating to ios 6.1 but i dont want immediatly i have shut down my iphone by holding sleep wake button and home button and cracks from that time and its not restarting

HarryAustralia wrote:
I recently updated my ipad wifi only to the new ios 6.1.2 and initially I had the auto cover lock option which can be seen in the Generals tab, but then it stoped working!! Before the update, the auto cover lock worked fine. So after trying all the options, I then did a complete reset on the ipad and now its gone all together from the General tab!! I can no longer see the "auto cover lock" option.
The iPad cover lock is for when you use a cover with magnets in it to lock and unlock the iPad when you close the cover or open it. Try running a refrigerator magnet along the sides of the iPad and see if that trips the iPad Cover Lock back into the settings.
That is not the same thing as the iPad Auto Lock setting which allows you to set an allotted time before the iPad goes to sleep.
You can try resetting all settings to see if the Auto Lock feature retinrs to the iPad.
Settings>General>Reset>Reset All Settings. You will have to enter all of your device settings again.... All of the settings in the settings app will have to be re-entered. This can be a little time consuming re-entering all of the device settings again.

I have a MacBookPro 5.5 and an iPad 2 32GB 3G; both items are pretty recent. Today I tried connecting them via blootooth. MBP state "pairing success" whereas the iPad seems to be still searching and indicates the MBP as "not connected". That over and over

I have a MacBookPro 5.5 and an iPad 2 32GB 3G; both items are pretty recent.
Today I tried connecting them via blootooth. MBP states "pairing success" (only after NUMEROUS attempts!!!) whereas the iPad seems to be still searching and indicates the MBP as "not connected". That over and over.
Also, the iPad does not seem to recognize ANY bluetooth device in the house (they ARE discoverable since my MBP DOES "see" them) like, for instance, my mini-Mac.
Any help would be appreciated; (I hope the problem lies NOT in the bluetooth antenna, in other words not in hardware.)
P.S. The MBP seems fine since it DID connect to Mac-mini.

Hello:
Was the iPad paired with another device? If so, you need to "unpair" it from the previous device. Bluetooth devices may be connected with only one thing at a time.
Barry

Hi All, I setup 2 Mac Minis, 'setup in a no-apple id. Now with Mini1 I installed a shared printer from Windows7 Pc it ask for credentials then I input Adminstrator account and the password ticking the remember in "keychain" I run a test print and its se

Hi All,
I setup 2 Mac Minis, 'setup in a no-apple id. Now with Mini1 I installed a shared printer from Windows7 Pc it ask for credentials then I input Adminstrator account and the password ticking the remember in "keychain"
I run a test print and its seamless. I reboot the Mini1 and run test print again and its good.
Now in Mini2 I did the same installation on shared printer but it is asking for user credential again and again, there is a check mark in "remember in keychain but still gives a notice that "requires authentication" I put the admin creadentials same with Mini1 then it prints.
every time I print on Mini2 its always asking for a user & password before Printing. How can we fix it.
I tried
- lpd printing = "authentication required"
- reset printer settings ang re-install printer = "authentication required"
- replace sharename in windows7, reinstall printer in Mini2 = "authentication required"
This stuff never happened to Mini1.

Hi All,
I setup 2 Mac Minis, 'setup in a no-apple id. Now with Mini1 I installed a shared printer from Windows7 Pc it ask for credentials then I input Adminstrator account and the password ticking the remember in "keychain"
I run a test print and its seamless. I reboot the Mini1 and run test print again and its good.
Now in Mini2 I did the same installation on shared printer but it is asking for user credential again and again, there is a check mark in "remember in keychain but still gives a notice that "requires authentication" I put the admin creadentials same with Mini1 then it prints.
every time I print on Mini2 its always asking for a user & password before Printing. How can we fix it.
I tried
- lpd printing = "authentication required"
- reset printer settings ang re-install printer = "authentication required"
- replace sharename in windows7, reinstall printer in Mini2 = "authentication required"
This stuff never happened to Mini1.

HT201302 When i open up itunes on my computer, it says that i have 2 videos but when i sync it and check my ipod touch, it says i have no videos so it only shows up on my computer but not on my iPod touch and its a 4th Generation.

When i open up itunes on my computer, it says that i have 2 videos but when i sync it and check my ipod touch, it says i have no videos so it only shows up on my computer but not on my iPod touch and its a 4th Generation.

Update Server
Try:
- Powering off and then back on your router.
- iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
- Change the DNS to either Google's or Open DNS servers
Public DNS — Google Developers
OpenDNS IP Addresses
- Try on another computer/network
- Wait if it is an Apple problem

Boot Camp Question .... I just bought a 2013 late model Mac Book Pro Retina and am wondering if it is worth installing windows through boot camp. If I install the windows component in order to run an exe file and its component "Declans Korean Flash Cards"

I just bought a 2013 late model Mac Book Pro Retina and am wondering if it is worth installing windows through boot camp.
If I install the windows component in order to run an exe file and its component "Declans Korean Flash Cards"... will it make my mac suseptible to viruses overall due to having a windows component? also will it make my mac slower as well

If you are only going to use one or two window only programs then I wouldn't waste the space. Try WinonX it allows you to install exe. Files on Mac without installing windows.

I baught a ringtone a few months back and I just now got a iPhone again but I can't find that ringtone and its not on iTunes any more either how can I get it back

I baught a ringtone a few months back and I just now got a iPhone again but I can't find that ringtone and its not on iTunes any more either how can I get it back

Graceruiz515 wrote:
Really
Really...

Itunes worked for about 30min. and then quit working, now it says there is a problem and shuts down. TGried uninstal and reinstall but it does the same thing. Will not run.

I am running Windows 8.1 and installed itunes and it worked fine for about 30min. and then icloud started and the itunes and icloud just quit. Tried to run itunes again but got a message "a problem occured and needs to shut down" then it shuts down. I have tried reinstalling but get the same problem. Tried uninstalling and reinstlling but it does the same thing.

I am running Windows 8.1 and installed itunes and it worked fine for about 30min. and then icloud started and the itunes and icloud just quit. Tried to run itunes again but got a message "a problem occured and needs to shut down" then it shuts down. I have tried reinstalling but get the same problem. Tried uninstalling and reinstlling but it does the same thing.

Report not running in BEx browser and RSRT in production

Hi All,
For one of the report I am getting very different error in production system. I am able to run the query in BEx analyser but when tried to run in Bex browser this gives error and terminates the report. When tried to run through RSRT it gives error and shows that some charcteristics are removed from infocube. This means it is using some very previous version of query. But afterwards the query was changed and transported to production. Still why am I getting this error.
As if the RSRT is accessing the old query and it is not refreshed the new one. If checked in designer it shows the latest query there. Can anybody suggest what could be the issue here?
Thanks in advance for your help.
Regards,
Wrushali

Hi,
Actually if we make a new query and save as then it works but this query doesnt work. The transport is ok. No error just warning is there.
I tried the delet old ABAP and generate query but still geting the same error. Can you tel me what this delete old ABAP does.
When execyted the query it goes to debug mode and some code is executed and if we check the dump is shows RAISE EXCEPTION and error in some SAR...RT19 program.
Please suggest if any idea.
Regards,
Wrushali

Help I itunes will not recognize my iphone or ipod. Trouble with USB driver, device not running in safe mode, and HDCP not supported.

Help! When I connect my iphone or ipod touch to my computer, windows recognizes my device but itunes will not. I can still see my songs, videos, and access the itunes store but my phone and itunes store have no connection so it does me no good. I have for 2 days now tried every trouble shooting method posted with no luck. I think I may have finally found a lead. My Apple Mobile Device USB Driver is showing up under portable mobile devices while it is supposed to be showing up under universal serial Bus controllers from my understanding? Also, while running my diagnostic report under itunes it also says itunes is not running in safe mode, it is not showing enabled in windows firewall (which it is checked), and the HDCP is not supported. I don't know what to do? I am in tears here, someone please help!!!

See Here for Device not recognised:
http://support.apple.com/kb/TS1538
Here for General Support:
http://www.apple.com/support/
This may also be helpful:
AMDS for Windows
http://support.apple.com/kb/TS1567

OC4J not running after creating workspace and projects.

Created one workspace and added six projects. Added PostGes jar to library manager. Before doing this, the OC4J would run a test application successfully. After creating the workspace and project, I created another simple workspace with two JSP, on linked to the other. When trying to run this project get the following:
Apr 17, 2008 10:51:53 AM com.evermind.server.jms.JMSMessages log
INFO: JMSServer[]: OC4J JMS server recovering transactions (commit 0) (rollback 0) (prepared 0).
Apr 17, 2008 10:51:53 AM com.evermind.server.jms.JMSMessages log
INFO: JMSServer[]: OC4J JMS server recovering local transactions Queue[jms/Oc4jJmsExceptionQueue].
Apr 17, 2008 10:51:55 AM oracle.j2ee.util.LoggingUtils logAndReturnMessage
WARNING: Exception creating connection pool. Exception: oracle.oc4j.sql.config.DataSourceConfigException: Unable to create : org.postgresql.Driver
08/04/17 10:51:55 SEVERE: ApplicationStateRunning.initConnector Error occurred initializing connectors. Exception is: Exception creating connection pool. Exception: oracle.oc4j.sql.config.DataSourceConfigException: Unable to create : org.postgresql.Driver
08/04/17 10:51:55 SEVERE: ApplicationStateRunning.initConnector Stack trace: oracle.oc4j.sql.DataSourceException: Exception creating connection pool. Exception: oracle.oc4j.sql.config.DataSourceConfigException: Unable to create : org.postgresql.Driver
     at com.evermind.server.ApplicationStateRunning.initDataSourceConnectionPool(ApplicationStateRunning.java:2072)
     at com.evermind.server.ApplicationStateRunning.initDataSourceConnector(ApplicationStateRunning.java:2017)
     at com.evermind.server.ApplicationStateRunning.initConnector(ApplicationStateRunning.java:1272)
     at com.evermind.server.ApplicationStateRunning.initConnectors(ApplicationStateRunning.java:345)
     at com.evermind.server.ApplicationStateRunning.initializeApplication(ApplicationStateRunning.java:206)
     at com.evermind.server.Application.setConfig(Application.java:438)
     at com.evermind.server.Application.setConfig(Application.java:339)
     at com.evermind.server.ApplicationServer.addApplication(ApplicationServer.java:1895)
     at com.evermind.server.ApplicationServer.initializeDeployedApplications(ApplicationServer.java:1651)
     at com.evermind.server.ApplicationServer.setConfig(ApplicationServer.java:1034)
     at com.evermind.server.ApplicationServerLauncher.run(ApplicationServerLauncher.java:131)
     at java.lang.Thread.run(Thread.java:595)
Caused by: javax.resource.ResourceException: oracle.oc4j.sql.config.DataSourceConfigException: Unable to create : org.postgresql.Driver
     at oracle.oc4j.sql.spi.ResourceAdapterImpl.createDataSourceConnectionPool(ResourceAdapterImpl.java:106)
     at oracle.oc4j.sql.DataSourceUtils.getDataSourceConnectionPool(DataSourceUtils.java:330)
     at com.evermind.server.ApplicationStateRunning.initDataSourceConnectionPool(ApplicationStateRunning.java:2053)
     ... 11 more
Caused by: oracle.oc4j.sql.config.DataSourceConfigException: Unable to create : org.postgresql.Driver
     at oracle.oc4j.sql.config.DataSourceConfigUtils.createConnectionFactory(DataSourceConfigUtils.java:283)
     at oracle.oc4j.sql.DataSourceConnectionPoolImpl.<init>(DataSourceConnectionPoolImpl.java:108)
     at oracle.oc4j.sql.spi.ResourceAdapterImpl.createDataSourceConnectionPool(ResourceAdapterImpl.java:99)
     ... 13 more
Caused by: oracle.classloader.util.AnnotatedClassNotFoundException:
     Missing class: org.postgresql.Driver
     Dependent class: oracle.oc4j.sql.config.DataSourceConfigUtils
     Loader: oc4j:10.1.3
     Code-Source: /C:/Jdeveloper10/j2ee/home/lib/oc4j-internal.jar
     Configuration: <code-source> in META-INF/boot.xml in C:\Jdeveloper10\j2ee\home\oc4j.jar
Remove the posgres jar from the library manager and still not able to run simple two page applications.
All the projects in the other workspace compile fine. The prolblem is that now I am not able to use the internal OC4J. I remove the workspace with the five projects, and the JARs and the two page app will not run.
The OC4J is running when launched from the IDE, ti just can find the pages.
New install of JDEV and the two page app will run fine. Add two user two user libraries and the app will not run.
Thank you,
Ben Carter

Do you have a database connection to postgress defined in JDeveloper?
JDev might be picking this up and trying to add a datasource for it to the embedded OC4J - so try removing it, or alternatively add the postgress JDBC driver jar files to the libraries node under tools->embedded OC4J preferences.

Java not running with windows 7 and IE 9

Hi,
I have a new laptop window 7 operating system and i have downloaded Java 7 and have IE 9. But, my Oracle applications is not running.
Does/ did anybody have this problem?? Please advise.
Thanks in advance,
Vasu

Please make sure you meet the minimum requirements as per:
Recommended Browsers for Oracle E-Business Suite Release 12 (Doc ID 389422.1)
Recommended Browsers for Oracle E-Business Suite 11i (Doc ID 285218.1)
Thanks,
Hussein

"qmasterd not running" - how this happened and what we did to fix it.

For this with the message "qmasterd not running".
This may be of help to those of you who are unsuccessful in
• initialising qmasterd
• can't sucessfully 'START' qmaster from the system preferences panel
• can't start qmasterd from the shell or the startupitems
• can't establish a cluster in qmasteradmin.app
• etc etc
Taste will vary ofcourse.
SOLUTION: after 2 days of concentrated troubleshooting on this we REINITIALISED the startup disk and RE_INSTALLED THE 10.4.8 O/S and all the applications and replaced (copied) the user data on the primary startup disk.
Affected H/W:
• g5 QUAD w/8GB memory and 3.7TB disk (including 2 x 250SATA internal DDMs) with 7800graphic card
• 30inches HD Cinema display
HIstory:
• decided to UPGRADE internal 2 x 250GB SATA1 DDM's with 2 x 500GB sATA2 DDMS because of storage shortage.
• on advice, we used APPLE MIGRATION ASSITANT to migrate 100% functional OS 10.4.8 startup disk (Macintoish HD) to external FW disk that had a fullfunctional 10.4.8 and apple pro apps as a back up. (This proved to be a very bad error of judgement - a mistake)
• all data migrated over to external disk sucessfully. System restarted on EXTERNAL DISK and tests (TTPRO) and user apps run - all is ok
• replaced G5 internal UPPER SATA1 250GB disk with new SATA2 500GB .
• using G5 startup DVD's , built and initialised OS/X 10.4.8 system on NEW G5 QUAD internal UPPER 500GB SATA2 disk as Macintosh HD.
• used Apple MIGRATION ASSISTANT to migrate all user and apps and ALL the files and objects from the working EXTERNAL disk we made earlier.
• reatrted and all looked fine. FCS, SHAKE, MOTION etc etc.. all business apps. UNTIL!..
• we could NOT get qmasterd to start - msg "qmasterd not running"
• restarted system many times.. no success.
ERROR SYMPTOMS:
• noticed sever apps were corrupted such as WACOM TABLET, LIttle SNITCH and others - these were remidied by reinstallation ... however..
• console crash reporter contained MANY dumps of qmasterd with general addressing exceptions:
Exception: EXCBADACCESS (0x0001)
Codes: KERNPROTECTIONFAILURE (0x0002) at 0x0nnnnnnn
also r31 contined the page aligned address of the exception.. and this was ALWAYS different.. so assumed a data driven (parm??) corruption.
• other symptions include that need to kill -9 (force quit) qmasterd as it would NEVER shutdown.
WHat else we did to try and fix this:
• repaired disk permissions (disk utility.app) - no luck...
• repaired qmaster files disk permissions as per http://www.kashum.com/blog/1152611689 and follwd instructions.. no luck
• removed QMASTER as per the instructions at http://docs.info.apple.com/article.html?artnum=93234 - reinstalled - NO LUCK - still dumps... ;(
• removed all the qmasterd parms hoping that would help - no luck
• used many sugesstions form these discussion, COW etc .. including disconnecting all networks... no luck
• tried out most of the suggestions including an excellent on from Richard BF at http://www.kashum.com/blog/1152611689 - a trully excellent entry for those with the issue of Unable to connect to background process' error dialog problem.
• einstalled QMASTER for SHAKE4.1 disks - no luck
• resinstalled FCS (2 hours later) - no luck
• restarted on secondary system (the external disk) and QMASTER works fine!
• reinstalled the original 250GB SATA1 - restarted form it to verify QMASTER was ok.. no dumps existed.
• reinstalled OS 10.4.8 (OS only) .. no luck
• used CARBONCOPY (CCC) to make new disk - this failed miserably .. will not use this again ever....
final outcome:
• concluded that APPLE MIGRATION ASSISTANT had somehow corrupted some objects in the SECOND GENERATION of copy) from external DISK to new internal 500GB SATA2 drive.
• threw the towel in and initialised the G5 QUAD's UPPER internal DDM (500GB SATA2) - installed a new OS to 10.4.8 + maint
• tediously installed every APP including ADOBE CS2 and the CS3 photoshop whilst I mess around calling Adobe locally for an activation code (I always need to do this I dunno why).
so a great waste of 2 days.
Summary: when QMASTER works it is terrific.. especially for rendering and transcoding... but when it doesn;t it is dreadful.
Maybe someone with expertise could shed some light on this.
cheers
W
Hong Kong

HI Chris, I closed it because:
• at the time + a few eeks after I posted it, I had few views of it .
• it is just a reference document to suggest the trouble shooting procedures and headaches we endured to try and rectify it in the view that others may try this path
• it is in fact old news for some who have FCS 2 now.
The 'fix" is described in the "SOLUTION" part of my post.
I agree your symptom you are having wth QMASTER is of great frustration.
I would encourage you however to perserve to get this working because wehn set up it works very well.
fwiw

Does hide a frame means do not run/execute that frame(and its query) ?

Similar Messages

Maybe you are looking for