Does HP 500-199 support Virtualization?

Does HP 500-199 support Virtualization? If so, what settings should be changed in Bios (or any other place)?

Hi, John:
Changing the operating system will have no effect on the hard coded BIOS settings and options which are stored on a chip on the motherboard, vice the hard drive.
Since I don't own your model, I don't know where else you can look in the BIOS to see if an enable VT setting exists.
Some PC's have it in the Power or Advanced BIOS options menus.
If you can't find a setting anywhere, then VT is not supported in your model..
A PC has to  have both a VT capable processor and BIOS in order for Virtualization Technology to work.
It does not appear the BIOS in your model supports that feature.
Best Regards,
Paul

Similar Messages

  • Does hp dv4 1551dx support hardware virtualization?

    hi,
    Does HP dv4 1551dx support hardware virtualization? if support, how does enable it?
    Thanks
    This question was solved.
    View Solution.

    To help you with your query, I have found a microsoft link on Windows 7 operating system itself. The link will provide all the necessary information about your query.
    http://www.microsoft.com/windows/virtual-pc/support/configure-bios.aspx
    Please post the update of the solution provided for further help.
    Let us know for more!
    "I work for HP."
    Click the Kudos star to say thanks
    Please mark Accept As Solution if it solves your problem
    Regards
    Sreenag

  • Hyper-V cannot be installed: The processor does not have the required virtualization capabilities.

    I am trying to use Visual Studio 2013 with Windows Phone SDK 8.0 on Windows 8.1 Enterprise running as a guest in a VirtualBox virtual machine hosted from Windows 7 Ultimate.  The Windows Phone emulator in Visual Studio will not work.  The
    guest Hardware Virtualization settings for VT-x and Nested Paging are selected.  The BIOS setting for Virtualization is enabled.  However, in the guest Windows 8.1 features settings, the "Hyper-V Platform" option is disabled and indicates
    that the "Hyper-V cannot be installed:  The processor does not have the required virtualization capabilities."  However, I checked on my processor which is an Intel (Clarksfield), I7-740QM 1.73 and it supports Hyper-V,
    SLAT/EPT.  My BIOS has only a single option for enabling Virtualization but none of the other SLAT/EPT, VMX, XD options.  I am lost here.  Is there a solution?  Do I need to use Visual Studio 2013 and Windows Phone SDK 8.0 directly
    on a Windows 8.1 host and not through a virtual machine?

    You can't run Hyper-V inside a VirtualBox VM (nested virtualization).  It doesn't pass through the necessary CPU requirements.
    The only virtualization solution that allows for nested VMs is VMware's Workstation and vSphere Hypervisor (ESXi). VMware Player is their free product, you may be able to use it, I've not tried player, but have nested Hyper-V in both Workstation and ESXi.
    Follow the instructions here for setting up VMware Player, you need to set the VM settings and .vmx file for it to work.
    http://www.virtuallyghetto.com/2011/07/how-to-enable-support-for-nested-64bit.html
    http://www.rickygao.com/enable-hyper-v-under-vmware-workstation-for-your-lab/

  • Is CE 500 Switch support 802.1q Trunk?

    Dear All,
    Is Cisco Express 500 switch support 802.1q trunk?
    Also, all fastethernet port on CE500 will assign VLAN 10. I would like the switch to allow VLAN 20 and 30 to pass through the trunk? Is it possible?
    Thanks.
    C.K.

    Yesh, set up the port role to switch to make it a trunk.
    Unfortunately, the CE500 series switches cannot be managed through a CLI - you have to use CNA.
    Hope that helps - pls rate the post if it does.
    Paresh

  • PC pavilion HPE h8-1120it and 500-012el supports SDD sata 3?

    hi, I want to know if the motherboard IPISB-CH2 (Chicago) on a PC Pavilion HPE h8-1120it, or motherboard H-Joshua-H61-uATX foxconn (on a PC pavilion 500-012el), support a hard drive SDD 6Gb \ s (SATA3), thanks

    Hi: The H61chipset does not according to the chipset specs from Intel... http://www.intel.com/content/www/us/en/chipsets/mainstream-chipsets/h61-express-chipset.html The H67 chipset does according to the chipset specs from Intel... http://www.intel.com/content/www/us/en/chipsets/mainstream-chipsets/h67-express-chipset.html

  • Does BIA Blade servers suppot virtualization

    Hi,
    I have a question, would like to know if the BIA Blade servers support virtulization? Is it possible to implement BIA on the Blade servers with VMware installed on it, there by enabling virtualization?. Does the BIA blade servers support virtualization?
    Thanks and Regards,
    Archana

    Hi Archana,
    as Vitaliy already mentioned VMware is currently not supported. The reason therefore is relative easy. BWA is based on the TREX search engine and there is some interesting note which you should take a look (1303814 - TREX 7.1: Usage of TREX on Virtual Machines (VM))
    The two reasons are why it also won´t be supported in near future:
    1) TREX can be used in virtual environments for low-data-volume scenarios. Please note that the published sizing rules may become invalid. SAP has measured TREX performance losses up to 30%, depending on the virtualization solution. If TREX performance issues in virtual server environments arise, make sure you have configured your virtual machine correctly. Reserving memory (and in some cases CPU) are recommended to rule out shortness of resources on the virtualization host in case of resource contention. A detailed resource planning is absolutely mandatory!
    2) TREX should be run on physical servers in high-load environments.
    There is no note especially for BWA, but it´s not supported in cause of the low CPU load of the vmware HW. You won´t get support if you install your prod environment on VMware! If you take the chance you can setup your test environment on VMware, but normally you also won´t get support in case of an error. I think this depends on the philosophy of your company...
    Regards,
    Jens

  • Will a HP Pavillion 500-569 support a gtx 750ti or gtx 970 mini

    Hello. Will this computer(HP Pavilion 500-569) support a geforce gtx 750ti or a geforce gtx 970 mini if they fit into the case? If so will I need to do anything additional(other then put a new power supply with reccommened wattage etc) before/after I install it? I have read about some issues with UEFI and other factors on other graphics cards on HP and other computers not supporting certain cards and I want to be 100% sure. Thank you so much
    http://www.futureshop.ca/en-ca/product/hewlett-packard-hp-pavilion-500-intel-core-i5-4590-1tb-hdd-8g...

    Hi,
    The HP Pavilion 500-569 only has a 300 watt power supply. The NVIDIA 750ti should work if it's not a model that requires an auxiliary six (6) PCI-E power connector.
    The NVIDIA GTX 970 will require that a bigger power supply be installed in your PC.  The Corsair CX600 would be a very good choice for a power supply.
    Open up your PC and do some measuring in parallel with the PCI-E x16 slot to see how long of a video card will fit. The slot adjacent to the PCI-E x16 slot needs to be vacant. Look carefully at the motherboard and makes sure that components on the motherboard don't interfere with the installation of the video card.  Review this posted article.
    HP Secure Boot Windows 8 Topics   Computer Does not Start After Installing a Video Card (Windows 8)
    HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
    HP Photosmart Premium C309G, HP Photosmart 6520
    HP Touchpad, HP Chromebook 11
    Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
    Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
    Windows 7/8 UEFI/Legacy mode, MBR/GPT

  • Does the 6600GT-VTD128 support video capture?

    Hi,
    I recently purchased an MSI 6600GT-VTD128 video card.  The product information seems to suggest that the card has video input capabilities, and there is an adapter that plugs into the card that has a number of connections, one of which is labeled S-Video in.  However, I haven't been able to get any video capture to work.
    Does the card actually support this functionality?  If not, what are the video input connections for?  If so, is there some documentation as to how to set it up?  
    So far, I tried installing the video capture drivers that come with the card.  I checked the manual.  I checked the MSI web site FAQs.  And I searched the forums.
    Any help would be greatly appreciated.
    Thanks,
    Daniel

    Thanks Richard.  Yes I do have a breakout cable like that.  Actually, I described it in my original message.  So, I am guessing from your message that you believe that the card should have the capability to capture video.  
    In my original message, I asked if there was any documentation on setting up the card for video capture.  The manual does not describe the procedure, nor does the MSI web site.  
    There are drivers on the CD that claim to be for video capture, but they had no effect when I installed them.  In fact, there appears to be no way to tell whether the drivers were actually installed successfully.
    If anyone out there has successfully used this card for video capture, please let me know.

  • HT4623 I have the original iPad, it does not seem to support ios6 and will no longer connect to iTunes WHY is this

    I have the oringinal ipad, it does not seem to support ios6 and will not connect to itunes, WHY is this?

    Start here... http://www.apple.com/support/iphone/assistant/itunes/

  • Does Photoshop CC not support touch on Windows 8.1 tablet?

    Does Photoshop CC not support touch on Windows 8.1 tablet? Stylus nor finger working on canvas. Have all the updates from Windows and Adobe.

    Photoshop does not have touch support. however some touch devices drivers have features the can be set to Photoshop Functions. For example
    Tablets that have drivers that use Wintab API for pen support can be used with Photoshop Brush Pen support.  Tablets that use Microsoft Ink API for pen support can not be used with Photoshop for Adobe does not have support for Microsoft INK API for Adobe states the INK  API lack features used by Photoshop Brush engine.

  • Does Sender Mail Adapter support "PayloadZipBean" module

    Hi everyone,
    I have a scenario where, I get the email with an zip file as an attachment and I need to extract this file and send across. There is no mapping transformation done here, only I need to forward the attached file to the file server.
    Zip file always contains 1 file and is a text file.
    so Its an Email to File Scenario.
    Can I send the zip file as it is without unzipping i.e., send the attachment as iit is to the file server?
    If I want to unzip the file, does the module "PayloadZipBean" support in case of sender mail adapter. ?
    Thanks,
    Varun

    Hi Varun,
    Use "PayloadZipBean " Module at Receiver Communication Channel  in the Module Tab Set the "Module Key.mode =  unzip"
    and Receiver communication Channel file should be "FileName.txt".
    http://help.sap.com/saphelp_nw2004s/helpdata/en/bd/c91241c738f423e10000000a155106/frameset.htm
    Regards,
    Naga.

  • Get an Error window, The source folder does not contain any supported camera raw files

    I am using CS2 and it would not open up my latest RAW files, I was getting a warning Could not complete your request because it is not the right kinds of document. So, I checked the Camera Raw Plug-in and it says Version 3.7. I see that my camera an Olympus E-20 is supported. But it is not opening the Raw files, the day before I took jpeg and they have opened. I will not trash my Adobe Photoshop CS2 because it was a royal pain to install and I don't know where the CD is.
    I installed the latest DNG Converter and when I try to open up the folder which has all the RAW images that didn't open in Adobe, I still get an Error window that says, "The source folder does not contain any supported camera raw files." Why? It says it supports my Olympus E-20. I actually have the E-20n, I don't think that is the problem. My RAW icons usually show up as small image thumbnails and this time they are gray icons only with the incorrect date under the icon. Is there another product I can use without spending money? These images I took in RAW were special and I don't want to lose them. Please help!
    Esther

    Hello, I was using only CS2 with my Olympus E-20n for 5 years, no problem. It just started acting up in RAW this year. I downloaded Picasa that same day and now it seems to be opening up all of my RAW files that didn't open the other day. So, I think Picasa installed a new plug-in adaption to CS2 because now all my RAW icons have a new logo on them, the same one that's in Picasa. Strange, but it works now and I am not complaining anymore. I love CS2 and the many ways I can adjust RAW files, so I am using it, Picasa is a sideline now that I can take a look at many thumbnails and it organized all my photo files by the year and folders. Amazing free software. I have probably 60,000 images in my computer and an external hard drive and Picasa picked them all up and made a library, cool.

  • Does 10.5.6 Support Dual displays for Radeon 9800 Pro Mac Edition cards?

    Does 10.5.6 Support Dual displays for Radeon 9800 Pro Mac Edition cards?
    And is there driver updates for anyone using the all-in-ones HP printers...has anyone been able to use their scanners since the update? and has the dual screen support been added to avoid the blue screen on startup?

    The ATI Radeon 9600 PC/Mac edition 256 MB should work in the MDD G4. It has two DVI ports (one is dual-link and can support a 30" display). You will need adapters for ADC displays.

  • Does K8D Master-FT support Dual core Opteron?

    Hi,
    Does K8D Master-FT support dual core Opteron? I saw the latest BIOS was released at 2003/12/11 and said to support for all series of AMD Opteron(up to 248, SC, 2.2GHz/1M).
    Thx, Xuekun

    Sorry I only looked after his question.
    The entire K8D-Master3 series has support for it: >>Link<<

  • Does Toshiba Multimedia Center support 5.1 via optical out?

    Hello, I have a question before I buy this...
    Does Toshiba Multimedia Center support 5.1 via optical out?
    I can find this out anywhere they only mention digital out but that could be coax.
    Can any of you help me?
    Thanks

    Hi
    As far as I know the Toshiba Media Center supports these feature:
    Dolby Digital Surround, Dolby Digital 5.1, EAX ADVANCED HD
    _Ports:_
    1 x LAN - RJ-45
    4 x hi-speed USB - USB Typ A, 4-polig
    1 x audio *SPDIF output*
    1 x audio - line-In stereo port 3.5 mm
    1 x headphones audio output stereo port 3.5 mm
    Greats

Maybe you are looking for

  • Upgrading multiple applications/clusters from 10.3.5  10.3.6

    I am looking for any recommendations/best practices for upgrading a weblogic domain installation which has multiple applications with each application deployed to a cluster. Each application has its own customized startup scripts for starting up the

  • Option At Start Up

    Is there a setting in the System Preferences or third party that would always on StartUp make the user select either Mac or BootCamp. I like having the option at each startup.

  • Print 1099 MISC form

    All, We applied the 2008 1009 oss note. Now I'm trying to test print in T03. Once I execute the program, I went to SPA script to print the form on a plain sheet. I could to print preview.But, I'm unable create spool.  I did choose the Print form opti

  • I'm having a "Scanner communication cannot be established" error when trying to scan to my iMac.

    Hi, I have an HP OfficeJet 6700 Premium printer connected via wireless to my iMac running the latest version of OS X Lion. I can print with no problems but when I try to scan using HP Scan 3 I get the "Scanner communication cannot be established" err

  • Cannot open raw photos from Canon 7DMK2 ?

    Cannot open raw photos from my Canon7DMK2?