Does HP sell a USB extension for the finger-print reader in an Elitebook 8540p?
I have an Elitebook 8540p. I can use the fingerprint reader to log in to Windows when the screen is open. However, when the laptop is 'docked' the screen is closed, covering the built-in finger print reader. Does HP sell a USB fingerprint extender or adapter which would allow me to use the biometric sign in when the laptop is docked?
I am sure they are the correct drivers, they worked with the system when it was an "HP" version of Windows.
The screens work for me, here they are again:
Similar Messages
-
Can I use a 10 ft USB extension for my HP printer?
Can I use a 10 ft USB extension for my HP printer?
USB 1.1/2.0 specifies a maximum cable length of 5 meters (~16 feet) - http://photo.stackexchange.com/questions/8679/whats-the-maximum-length-of-usb-ca ble-that-you-can-use-for-tethering
-
I own a W700 and I have enabled the Hard Disk password at boot time (I have 2 HDDs, so there are two password prompts).
I always type in the passwords, but was wondering if the Finger Print Reader can be used instead?
The Finger Print Reader works fine from Windows 7 logon onwards, but it would also be nice to use it at system boot time, after powering on.
Please let me know if this is possible.
Thanks!
Solved!
Go to Solution.Sorry I did not get back online quick enough...but the passwords are the same.
For some reason, after my first cold boot, I was still prompted for the hard disk passwords. I powered down again and when I powered back up, it signed me on all the way through. So it was just a hiccup.
All is good now and I'm very happy!
Thanks for pointing me in the right direction. -
Can two people use the finger print reader on the same computer
I can not get the finger print reader work for me. My wife can use it, but I can not get registered.
Hi,
Based on the following link, you need a different account to be able to register your fingerprint, the rest should be the same:
http://bizsupport1.austin.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c01471790&printver=tru...
Can multiple people log into the same PC with the fingerprint reader?
Yes, multiple people can log into the same computer with the fingerprint reader if each has their own user account.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem. -
Firefox does not recognize my finger print reader for passwords
My lap top has a finger print reader into which I code all my passwords. When I use Explorer my finger print reader works fine, but when I use Firefox as my browser the finger print reader does not work
I looked for software and found a suggestion which I down loaded. Now the finger print reader does not work either on Internet Explorer or on Firefox. So I had to do a reset to an early time to get rid of that soft ware. We are back to where I started, with the finger print reader working fine on Explorer 11 and it does not work at all on FireFox. There must be some work around, has this not occurred with other folks.
-
Finger print reader does not work
i followed the directions and my print was scanned, rescanned,and the edges were scanned and accepted but the reader does not react when the phone is locked....i deleated and rescanned and followed all directions which accepted my finger print....once again thereader does not unlock the phone...any suggestions?
I looked for software and found a suggestion which I down loaded. Now the finger print reader does not work either on Internet Explorer or on Firefox. So I had to do a reset to an early time to get rid of that soft ware. We are back to where I started, with the finger print reader working fine on Explorer 11 and it does not work at all on FireFox. There must be some work around, has this not occurred with other folks.
-
Finger Print reader does not link to Win7 Logon Screen
Win7 Ultimate 64 bit
FingerPrint software 5.9.4
Biometric link to windows Logon accepted
MS Server domain client
At system boot, the logon screen appears and the fingerprint light is "on". I scan my finger, the light blinks once and no submission of the saved Windows password to the logon window. I must key in password.
Lenovo support asked me to uninstall software, BIOS clear saved finger prints then re-install (and re-register). I have done this twice with no change.
This was working until I had to break the domain connection (server change) and re connect to the domain with the same logon/password. It was at this time that the finger print reader stopped passing the biometric password to the OS.
Any thoughts on how to re-connect reader to logon?
Solved!
Go to Solution.This was working until I had to break the domain connection (server change) and re connect to the domain with the same logon/password. It was at this time that the finger print reader stopped passing the biometric password to the OS.
Any thoughts on how to re-connect reader to logon?
I am using 5.9.4 with no problem, although I seem to recall having to go into the Fingerprint software and make some innocuous setting change, then change it back. But I was changing a lot of things at the time and don't know for sure if that had any effect.
Are you able to log onto the domain by manually entering your password? If not, may need to re-add the computer to the domain.
W520 | FHD | i7-2720QM | 8GB RAM | nVidia Quadro 1000M | Intel 510 120GB SSD | Seagate 7200rpm 500GB HDD
T510 | 1366x768 | [email protected] | 8GB RAM | nVidia NVS 3100M | Seagate 7200rpm 500GB HDD
T61p | 1920x1200 | [email protected] | 4gb RAM | nVidia Quadro FX 570M | Hitachi 320GB HDD | (broken frame, now a file server) -
Vista Drivers for Finger Print Reader on a Portege R200????
Please help
I have a R200 model, which originally came with Windows XP, now have Windows Vista Business Edition Installed & having problems getting the Finger Print Reader to work. I have tried plenty of programs which Windows says have installed properly, but they all state that the reader is not conected??
I have tried so many times to get it to work, and looked at the manufactures web-site for Drivers or Software, but nothing.
Seems very strange for a Toshiba Laptop not to work fully, even when it states on the OS sticker Windows Vista Capable ???
UmmmmmmHi there,
where did you downloaded the drivers? Maybe on the european webpage? Here are some links with toshiba driver download pages where you could probably find some drivers you need:
http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp
Toshiba - Download
http://www.csd.toshiba.com/cgi-bin/tais/su/su_sc_home.jsp
ToshibaUSA
http://209.167.114.38/support/Download/ln_byModel.asp
Toshiba of Canada Limited - Drivers and Downloads
Greets -
Is it possible to have two USB drives for the IPad? I want to bring RAW files from my camera through the IPad and out to an external hard drive. One of my cameras has an SD card but the other one doesn't have a card that would fit in any of the camera devices I've seen on line. Realted to this, I bought the IPad camera accessory. Can I put the SD card in the device and also hook the external hard drive to the USB port of the accessory and download from the camera to the hard drive? Can I put Lightroom or the Nikon photo editing software on the IPad? Right now I carry a PC laptop and external hard drives with me on wildernes trips. Internet and WiFi are not available. Because I shoot so many photos and they're in RAW I need to download from the camera to the external drive because I run out of memory on the PC (and it has much more memory than the IPad). I have Nikon NX software and lightroom on my PC. I'd love to be able to reduce the weight I carry by using the IPad to edit my photos each night while on trips. Is this possible and how would I do it? I'd appreciate any guidance.
No, the camera connection kit only supports the copying of photos and videos to the Photos app, it doesn't support copying content off the iPad. For your second camera instead of the SD reader part of the kit, does the iPad to camera cable not work with it for direct transfer to the iPad ?
For Lightroom and Nikon software again no - you can only install apps that are available in the iTunes app store on your computer and the App Store app on the iPad, 'normal' PC and Mac (OS X) software are not compatible with the iPad (iOS). There are some apps that perform fairly basic editing functions that are available in the store, but nothing as sophisticated as, for example, Lightroom. -
Does Acer make and sell a lens cap for the H5380BD projector? I can't find it anywhere.
Does Acer make and sell a lens cap for the H5380BD projector? I can't find it anywhere. The manual says the lens cap is optional, but I can't find it on the Acer web-site, eBay, or in search engines.
No luck john:Does Acer make and sell a lens cap for the H5380BD projectorEric:Sorry, we do not.May I assist you with anything else?
-
Does apple still sell replacement A1342 batteries for the white unibody macbook
Does Apple still sell replacment replacment batteries for the white unibody macbook?
The model 6,1 Late 2009 and the model 7,1 Mid 2010 with the A1342 case use an A1331 battery. You can replace it yourself or have Apple do it for you for $129. If you need it quickly make sure you order it from a U. S. seller. Orders from China can take two or three weeks.
http://www.ebay.com/sch/i.html?_nkw=macbook++battery+a1331&_sacat=0&_odkw=macboo k++battery+a1342&_sop=12&_osacat=0
Here's installation instructions. You'll need a Tri Wing Y1 screwdriver in addition to the usual #00 Phillips screwdriver.
http://www.ifixit.com/Guide/Installing-MacBook-Unibody-Model-A1342-Battery/1667/ 1 -
my ipod won't show up on my computer. I have another ipod touch, that works fine. What should I do? Do I need a different ipo usb cord for the nano?
iTunes never displays the iPod in the left pane?
iTunes is shipped with a "helper application" called the "iPod Service" that runs and is used by iTunes to communicate with the iPod device. This service may be disabled.
If your system is Microsoft Windows XP and you are logged in as an Administrator:
1. Quit iTunes and, if your iPod is currently connected to your computer, safely remove it using the system tray application to manage removable devices.
2. Right click on "My Computer"
3. Select "Manage"
4. In the "Computer Management" window, left pane (tree view), follow this path:
+Computer Management (local) > Services and Applications > Services+.
5. In the right pane, scroll down to "iPod Service" and double click it.
6. If the service is listed as "Disabled" and "Stopped," change to "Manual" and "Start" it. ("Manual" will cause it to start when iTunes starts and "Start" starts the service right now.)
7. Close "Computer Management"
8. Restart iTunes and wait for it to completely come up.
9. Reconnect your iPod.
Does your iPod show up in iTunes? -
Shorter USB cable for the Dinc 2
Looking for a shorter length USB cable than the one that came with the phone.
Does anyone know if they make a short length (less than 3') USB cable for the Dinc 2?
If so where could I get one?
Thanks again.You have heard of 'Tethering' witch is only available on the iPhone but not in the US (thank you AT&T). That is only for using the iPhone to connect a computer to the internet. Sorry
-
I'm trying to run the Cross validation report on a mining structure that contains just Microsoft Association Rules mining model. In Target Attribute, I've tried:
Actual(Service Description).SE value
Actual([Service Description]).[SE value]
Actual(Service Description)
Actual([Service Description])
just because i don't know what is the exact correct format, but none of them worked, and I always get the following error:
Error (Data mining): The specified mining structure does not contain a valid model for the current task.
the following is my mining model structureAssociation rules does not allow for cross-validation
Mark Tabladillo PhD (MVP, SAS Expert; MCT, MCITP, MCAD .NET) http://www.marktab.net -
Camera RAW does NOT yet support raw files for the new Canon Sureshot S95
Camera RAW does NOT yet support raw files for the new
Canon Sureshot S95.
Adobe, please can you provide an update asapHello!
I think that you need to be patient.
There has not been any release of Camera Raw since the release of the camera.
I recommend to try the next version once it will be released, as there might be preliminary support (and therefore not listed).
Usually, Adobe is amongs the firsts to support a new camera.
Even though the Camera Raw team is fielded with wonderful coders, I do not think that they do have a time machine to allow support before they have their hands on a camera
Maybe you are looking for
-
Hard drive is emitting a clicking noise
I bought a brand new 2.66Ghz macbook pro about two weeks ago, and I have found that the hard drive is making faint clicking noises. They are too quiet to hear in normal use, but when it's quiet, they are noticeable and annoying. This is either a sign
-
Pavilion pc a6157c How do I get recover disc for vista when system will not boot????
-
Copy Customer in different Sales Organization
Hi, we have a company code and we create another Company Code and another Sales Organization in the same machine. For that, there are a lot of customers that will begin to work with the new Company. We find a report RFBIDE10, Transfer Customer Master
-
Random Slowing and deleting files..
Hello, i have some problems with my Xserve. First when we try to delete files on the Xserve from a network G5, the deleting is direct (no move to trash) and very very slow, making all the xserve going slow... Sometimes (randomly) all the server go ve
-
Superdrive not appearing on Finder on my iMac will not burn JPG files
Superdrive is not appearing on Finder and in drive Utilities it will not burn JPG files - says doesn't recognize the file type. The more I am exposed to Apple the more they look like Microsoft. If the drive doesn't work with the IMAC then why the *