Does I photo duplicate images when added to more than one album?

I am trying to eliminate duplicates in IPhoto. Is each image duplicated if addes to more than one album?

There are no duplicates in iPhoto unless you import multiple copies of a photo
Albums do not exist with photos in them. Pacing a photo in an album simply makes an entry in the iPhoto database and takes no space
LN

Similar Messages

If I have a pic in more than one album, does iPhoto make more than one copy of that pic? When I search the file name on finder, it seems to be showing one copy of that file for every album it's in.

If I have a pic in more than one album, does iPhoto make more than one copy of that pic? When I search the file name on finder, it seems to be showing one copy of that file for every album it's in.

No it doesn't. Albums simply reference the photos in the Library. A single shot can be in 100 albus and use no extra disk space at all.
If you have the same shot in two Events then yes, the file is duplicated.
When I search the file name on finder, it seems to be showing one copy of that file for every album it's in.
The Finder doesn't really understand the iPhoto Library. It's quite possible for the iPhoto Library to contain many files with the same name. The Library also contains different versions of the same shot - thumbnail, originals and edited version. This is normal.
Regards
TD

When I have more than one tab open, if I click on a picture to view, when the window opens to view the photo, firefox crashes. I also notice while looking at a web page, the pinned tabs to the left of the bar are constantly reloading for some reason.

When I have more than one tab open, if I click on a picture to view/enlarge, say eBay, and I click on the items photo to enlarge it, when the window opens to view the photo, Firefox crashes. I also notice while looking at a web page, the pinned tabs to the left of the bar are constantly reloading for some reason, The green circle starts going round and round for no reason even though the tab is not being viewed. Both problems seem to have started after the last software update.

See:
* http://kb.mozillazine.org/Firefox_crashes
* https://support.mozilla.org/kb/Firefox+crashes

My hard drive has 70.93 GB available, yet when i have more than one internet tab open, i have to force quit google chrome because 'there is no more available application memory'. How can I solve this? I have a 2009 macbook pro running on 10.6.8.

My hard drive has 70.93 GB available, yet when i have more than one internet tab open, i have to force quit google chrome because 'there is no more available application memory'. How can I solve this? I have a 2009 macbook pro running on 10.6.8. I have tried updating to mavericks through the mac app store but after it downloading for a day i got an error message saying there was a problem with the download. The same thing happens if i try to update itunes or the mac app store. After research, i have also tried repairing disk permissions, but every time they do get repaired the 'repair' button still appears, i'm not sure if it's because it was unable to repair the initial problems or if it just keeps detecting new ones.

2 GBs is a minimum in which you can do many things, but not concurrently. Be very careful to not install third-party add-ons, limit the number of applications you choose to enter in Login Items, run as few applications concurrently as you demand.
I would consider adding more RAM to your computer. Your model supports 8 GBs, so I would install that.

When I open more than one tab with ikls.ru web site - safari freeze immediately.

I have a Lion OS and all updates. When I open more than one tab with ikls.ru web site - safari are freezing immediately.

In safe mode the same problem in Safari. And I couldn't enable the guest account. You can see an attached pic. It's in Russian, but I think it's clear. I took a pic in a safe mode, but in normal mode it's the same.

Pen pressure sensitivity stops when I have more than one window open

I recently upgraded to Flash CC and have noticed some new bugs. Here's one of them:
When I have more than one document open at a time, my pen pressure sensitivity stops working. In fact, it seems to work on the newest opened document, but will stop working on any previosuly opened documents. If all but one document is closed, the pen pressure returns.
I'm using Windows 8, and a Cintiq 21UX.
Steps to reproduce:
- Launch Flash.
- Open a new document.
- Select the "Brush" tool.
- Toggle "Use pressure" in the tool bar.
- Draw something to make sure the pen pressure is working.
- Open a new document.
- Draw something to make sure the pen pressure is working.
- Return to the previous document and attempt to draw.
- Notice how the pen pressure is absent.
Any help or suggestions would be great. Thank you.

No problem. I've been using older versions of Flash until CC gets the bugs squashed. This pressure issue is a deal breaker for my coworkers and me, and also this audio one: http://forums.adobe.com/message/6013488?tstart=0

Filter photos that are located in more than one album

I'm trying to organise my iPhoto events onto albums in the new photos app in 10.10.3, however, I think I messed up with a bunch of photos and need to start clean, I need to be sure that one specific photo or group of photos are located in a single album, kinda like iPhoto used to work with events, I know a photo can be in more than one album at a time, but how do you tell with filters?
Tried to create smart album but seems to be no criteria for that.
Thanks.

You can't. You know that during the conversion from iPhoto to Photos all of your current iPhoto Events also were converted to albums inside the folder in the sidebar titled "iPhoto Events".
So you only have to worry about new imports which go into Moments.

If photos are in more than one album or event are they taking up twice as much disk space? is there a way to eliminate all duplicates without doing it one by one?

If photos are inmore than one album or event are they taking up twice as much disk space?
Is there a way to eliminate duplicates without doing it one by one?

A photo exists in only one event. However, it can be in multiple albums, slideshows, books, etc. without taking up any additional disk space.
If you truly have duplicates in iPhoto, not as viewed via the Finder you can use one of these applications to identify and remove duplicate photos from an iPhoto Library:
iPhoto Library Manager - $29.95
Duplicate Cleaner for iPhoto - free
Duplicate Annihilator - $7.95 - only app able to detect duplicate thumbnail files or faces files when an iPhoto 8 or earlier library has been imported into another.
PhotoSweeper - $9.95 - This app can search by comparing the image's bitmaps or histograms thus finding duplicates with different file names and dates.
DeCloner - $19.95 - can find dupicates in iPhoto Libraries or in folders on the HD.
Some users have reported that PhotoSweeper did the best in finding all of the dups in their library: i photo has duplicated many photos, how...: Apple Support Communities.
If you have an iPhone and have it set to keep the normal photo when shooting HDR photos the two image files that are created will be duplicates in a manner of speaking (same image) but the only diplicate finder app that detected the iPhone HDR and normal photos as being duplicates was PhotoSweeper. None of the other apps detected those two files as being duplicates as they look for file name as well as other attributes and the two files from the iPhone have diffferent file names.
iPLM, however, is the best all around iPhoto utility as it can do so much more than just find duplicates. IMO it's a must have tool if using iPhoto.
OT

Aperture crashes when e-mailing more than one photo at a time.

I am unable to send more than one image at a time after updating to ML. I have to force quit the mail appl. This is a know issue and I am unable to find out if a fix is available or pending.

It is still not fixed for all - on my system MacOS 10.8, Aperture 3.3.2, Mail.app, it is working.
See this thread for work-arounds:
Mailing more than one image not working
And send a bug-report to Apple, using the feedback form from the Aperture menu:
Aperture > Provide Aperture Feedback
Regards
Léonie

Can I have more than one album art Image displayed on ipod per song?

Can someone help?
My issue is that in itunes I can add more than one image (album art) to an individual song. While it's playing, in the display album art (bottom left corner) I can flick through all the images a particular song contains. I got exicted and came to the assumption that not only can I display album art (covers) but also single art (covers) for songs that got release from an album on my ipod. However when I downloaded all the tracks on to my ipod it only displays album art and not single art (covers) for released songs. Is there a way I can have both album and single art displayed on my ipod for a song? I spent hours finding these single art covers on the internet!
30Gig ipod (Black) Windows XP
30Gig ipod (Black) Windows XP

On the iPod you can only display one picture attached to that song. The one that gets assigned to the song is the first picture on the list in iTunes.

Airport disconnects when there's more than one device

I've got a really weird problem.. I have an Apple Airport Extreme 802.11n 3rd Generation. Software version 7.6 When more than one device connecrts to the base station it will disconnect everyone and then all devices will go into a connect/disconnect loops. Rapidly. This occurs only with wireless device. I watched the radar on my iPhone (5.1), Macbook running Snow Leopard, Macbook Air running Lion, and iPad 2 (5.1) blinking on and off, on and off. The only way to resolve this is to just have ONE person connect at a time.
Things I've tried:
1) Updating all software on all devices
2) Updating Airport firmware
3) Reboot and then restoring factory settings on the Airport when the reboot didn't work
4) Turning off encryption (WP2)
5) Making sure there are enough IP's for all the devices, turning off robustness, making sure the router is visible.
Because I know someone will ask this: The Airport sits atop a credenza in the open air. Nothing on, around, or above it. It's been in this position for months with no problem. It's not overly warm to the touch and I even used compressed air to blow out the vents (just in case) when this problem began.
I read once upon a time that the router gets a cache built up and that can cause these types of issues, but I have no idea how to delete said cache or even if it exists. It's just odd this only happens when more than one wireless device tried to connect to the network.
Thoughts?

I've resolved this! For some odd reason Apple won't let me denote this so I'm adding this reply. Turns out the problem was POWER related. The Airport was plugged into a power strip with several other devices. I unplugged all of those leaving just the Airport and the problem has not returned. If I add on all the devices, regardless of the power strip used, the problem returns. So it appears the Airport was just not getting enough power.
I've got it on a UPS now and the problem has not returned.

Why does Boot Camp Assistant already think I have more than one partition on my hard drive?

Greetings...
I'm surprised I've found no remedy for this problem in my searches so far. My symptom is that when I run the Boot Camp Assistant app, I get the following error message:
"The startup disk cannot be partitioned or restored to a single partition." The instructions that are provided along with the error message are: "Back up the disk and use Disk Utility to format it as a single Mac OS Extended (Journaled) volume. Restore your information to the disk and try using Boot Camp Assistant again."
When I try to follow the instructions, I see that Disk Utility shows my drive as having a single partition. Nevertheless, I've backed up my Macintosh HD volume, re-artitioned the drive into a single Mac OS Extended (Journaled) volume (once using the Snow Leopard Installation disk and once using Drive Genius 3), and restored my Macintosh HD volume. After all that, I still get the same error message. I even defragged my hard drive, which seems to have helped some users I've read about, but it hasn't helped me.
Something worth noting is that I recently upgraded to a bigger internal hard drive, and before doing so, I deleted the Boot Camp volume. I innocently thought I'd just do a fresh install sometime after replacing the hard drive, but hindsight tells me that I might have fallen victim to my own ignorance.
Is there a value stored in a register somewhere that's telling my OS that I have more than one partition when I really don't? Can someone out there help me do battle against my ignorance?
I'd be grateful for any help that can be sent my way...

I used DG3 to initialize the HD, which essentially erases the disk if I understand correctly. I haven't used Superduper before, so perhaps that's worth looking into.
I did mentioned the use of DG3 to ensure that I had a single disk partition. I guess the restore from a clone or Time Machine was implied...
;o)
Thanks for putting some effort into helping me. I'll look at Superduper and let you know if that gets me anywhere...

BB stripping recipient name/address when they are more than one in TO or CC

Have a very perplexing problem. My client cannot see more than one
recipient name and/or address at the TO and CC lines on his
blackberry, but he sees them ALL in Outlook.
I can send to his [email protected]
account, and he
sees them in Outlook AND on his Blackberry.
When I send to him on his [email protected] , he only sees 1
name and/or address at the TO and CC line on his blackberry, but sees
ALL recipients names and/or address in Outlook?
I have looked at the messages in Exchange Message Tracking and I can
see them hitting the server with the additional recipients (after the
first name) removed when the SEND TO address is
[email protected] .
On some emails, he may have been the third name in the SEND TO list,
and when he sees them on his Blackberry, it only shows the first
persons name so if it wasn't him, he doesn't even see his name listed?
There is not filter on his account and he is the only one with this
problem. He has a Blackberry Curve.
Rogers is no help....they just keep saying it's Exchange.
Any ideas?

what happens when that person does a "reply to all" from his/her blackberry device ? who are the different recipients ?
can that person send a message to several To: from his/her device ?
did you do the soft reboot or the hard reboot ?
The search box on top-right of this page is your true friend, and the public Knowledge Base too:

Adding Artwork (More Than One Song At A Time)

I'm adding artwork to the songs that iTunes couldn't find automatically. Is there a way to add the artwork to more than one song at a time? It would be way easier if I could just add the artwork to an album all at once. I tried listing the songs in "Album List" order and dragging the .jpg into the blank artwork icon, but it didn't take.
Please tell me that there's a way to do this; it's a hassle having to add artwork one song at a time!
Thanks,
-Adam

At the Artwork box at lower left, click the text above the box so it shows "Selected Item".
Select all the songs for one album then drag the artwork to the artwork window or Copy/Paste it into the Artwork box.

Does BPEL allow partnerlinks where the WSDL has more than one namespace

Hi
I have a WSDL where the schema is in a different namespace than the message types. BPEL Designer throws "Exception: Problem building schema" when accessing the variable in the "Assign" activity. Can someone point out if there is a problem with my WSDL file ?
<?xml version="1.0" encoding="UTF-8"?>
<definitions name="ProvWithXSL"
targetNamespace="http://xmlns.oracle.com/ProvWithXSL"
xmlns="http://schemas.xmlsoap.org/wsdl/"
xmlns:client="http://xmlns.oracle.com/ProvWithXSL"
xmlns:tns="http://www.example.org"
xmlns:plnk="http://schemas.xmlsoap.org/ws/2003/05/partner-link/">
     
     <types>
          <schema attributeFormDefault="qualified"
               elementFormDefault="qualified"
targetNamespace="http://www.example.org"
xmlns:tns="http://www.example.org">
               xmlns="http://www.w3.org/2001/XMLSchema">
<complexType name="EventHdr">
<sequence>
<element name="eventType" type="string"/>
<element name="eventID" type="string"/>
<element name="eventSrc" type="string"/>
<element name="objectDN" type="string"/>
<element name="profileID" type="string"/>
</sequence>
</complexType>
<complexType name="Attribute">
<sequence>
<element name="attrname" type="string"/>
<element name="attrval" type="string" maxOccurs="unbounded"/>
</sequence>
</complexType>
<complexType name="EventAttrs">
<sequence>
<element name="attr" type="tns:Attribute" maxOccurs="unbounded"/>
</sequence>
</complexType>
<element name="event">
<complexType>
<sequence>
<element name="hdr" type="tns:EventHdr"/>
<element name="attrs" type="tns:EventAttrs"/>
</sequence>
</complexType>
</element>
<element name="ProvWithXSLProcessRequest">
          <complexType>
               <sequence>
                    <element name="parameters" type="string"/>
               </sequence>
          </complexType>
     </element>
     <element name="ProvWithXSLProcessResponse">
          <complexType>
               <sequence>
                    <element name="result" type="string"/>
               </sequence>
          </complexType>
     </element>
</schema>
</types>
     
     <message name="ProvWithXSLRequestMessage">
          
<part name="payload" element="tns:ProvWithXSLProcessRequest"/>
     </message>
     <message name="ProvWithXSLResponseMessage">
          <part name="payload" element="tns:ProvWithXSLProcessResponse"/>
     </message>
     
     
     <portType name="ProvWithXSL">
          <operation name="initiate">
               <input message="client:ProvWithXSLRequestMessage"/>
          </operation>
     </portType>
     
     <portType name="ProvWithXSLCallback">
          <operation name="onResult">
               <input message="client:ProvWithXSLResponseMessage"/>
          </operation>
     </portType>
     
     <plnk:partnerLinkType name="ProvWithXSL">
          <plnk:role name="ProvWithXSLProvider">
               <plnk:portType name="client:ProvWithXSL"/>
          </plnk:role>
          <plnk:role name="ProvWithXSLRequester">
               <plnk:portType name="client:ProvWithXSLCallback"/>
          </plnk:role>
     </plnk:partnerLinkType>
</definitions>

You can use more than one namespace (done so before), and several ways to do so.
But first, there's one error in your schema definition:
<schema attributeFormDefault="qualified"
elementFormDefault="qualified"
targetNamespace="http://www.example.org"
xmlns:tns="http://www.example.org">
xmlns="http://www.w3.org/2001/XMLSchema">
remove the ">" after xmlns:tns. Btw, this will cause the exception to occur as well.
Why not put your elements in a new schema, like below, and leave the original ports & messages intact, as you don't change anything in it from the original generation. Just add this schema above/below the schema for the messages and it will work just fine.
hth,
Mike
So, you will have a wsdl that looks like:
<schema attributeFormDefault="qualified"
elementFormDefault="qualified"
targetNamespace="http://www.example.org"
xmlns:tns="http://www.example.org"
xmlns="http://www.w3.org/2001/XMLSchema">
<complexType name="EventHdr">
<sequence>
<element name="eventType" type="string"/>
<element name="eventID" type="string"/>
<element name="eventSrc" type="string"/>
<element name="objectDN" type="string"/>
<element name="profileID" type="string"/>
</sequence>
</complexType>
<complexType name="Attribute">
<sequence>
<element name="attrname" type="string"/>
<element name="attrval" type="string" maxOccurs="unbounded"/>
</sequence>
</complexType>
<complexType name="EventAttrs">
<sequence>
<element name="attr" type="tns:Attribute" maxOccurs="unbounded"/>
</sequence>
</complexType>
<element name="event">
<complexType>
<sequence>
<element name="hdr" type="tns:EventHdr"/>
<element name="attrs" type="tns:EventAttrs"/>
</sequence>
</complexType>
</element>
</schema>
<schema attributeFormDefault="qualified"
elementFormDefault="qualified"
targetNamespace="http://xmlns.oracle.com/ProvWithXSL"
xmlns:tns="http://www.example.org"
xmlns="http://www.w3.org/2001/XMLSchema">
<element name="ProvWithXSLProcessRequest">
<complexType>
<sequence>
<element name="parameters" type="string"/>
</sequence>
</complexType>
</element>
<element name="ProvWithXSLProcessResponse">
<complexType>
<sequence>
<element name="result" type="string"/>
</sequence>
</complexType>
</element>
</schema>

Does I photo duplicate images when added to more than one album?

Similar Messages

Maybe you are looking for