Does iBooks support .cbr files?

Does anyone know if iBooks for Mavericks supports .cbr (comic) files? I have a bunch of comics I have saved and wanted to know if they were compatible with iBooks.

I am just joinning the Apple world and I don't know much about it yet, but, I believe there may be an app that does what you need, instead of the iBooks app.

Similar Messages

  • How to fix file when it says, "Cannot open file " ". Adobe Indesign does not support the file format, a plug-in that supports the file may be missing, or file may be open in another application." It worked one second, I saved and closed the file, then tri

    How to fix file when it says, "Cannot open file " ". Adobe Indesign does not support the file format, a plug-in that supports the file may be missing, or file may be open in another application." It worked one second, I saved and closed the file, then tried to reopen and now it won't work. I am using Adobe InDesign CS5. It is the only version on my comp. I have tried opening on another comp & copying the file – same error comes up. PLEASE HELP

    First check the version of the document with Jongware's script "Identify.jsx" (ExtendScript/JavaScript).
    You can find it here:
    [Ann] Identify Your InDesign File
    If it is CS 5.5 or above, you need someone to open it in the version the script says and export an IDML representation from that. Another way would be to install a 30days version of CS6 or above (CC) and do it yourself.
    In regards of the script showing a result for InDesign files higher than CS6:
    CS7 = CC v9
    CS8 = CC v10 = CC-2014 or CC2014.1
    Uwe

  • Nokia E75 does not support sis files

    I've been trying to upgrade the Ovi maps on my E75, because navigation has kept me saying that I need to renew the license. I went to Nokia web site and found out that I need to upgrade Ovi maps in order to get the free navigation. I have a 202.12.01 firmware and I installed it once again when I had unsuccessfully tried to upgrade Ovi maps. I have Ovi maps v3.01 09wk44b01 (MW OpenGL LM MN) and Map version 0.1.24.114 (OpenBitLM 6.22.5). I've deleted all old maps and started to download new ones successfully over Nokia Ovi Suite. I've downloaded Nokia Ovi Suite and followed the instructions for downloading and installing the newest version of Ovi maps application (I suppose it must be newer than the one I have on now, because navigation still wants me to buy license, I guess it must be 3.03 or higher). I've tried it several times from the scratch, just to make sure I did it right. Of course I've also chosen the right E75 phone from the drop down menu and I downloaded the file nokia_maps_3.01_09wk44_b01_s60_3.2_lm_rom.sis. I double-clicked it and everything seems to be right, but when action on the phone should be required the installation guide says "Nokia E75 does not support sis files". From the sis file name I can only now see that I have this version already installed.
    Does this mean I can not use navigation for free on E75?
    Can anybody help me ASAP, because I need the navigation evey day very badly?

    I'v followed the directions of chanchan05 "Just uninstall the maps app, delete the folder and file I mentioned, then reboot your phone. Open the maps app, and it should recreate the qf file and cities folder in a version compatible to 3.03." on /t5/Maps-Navigation-and-GPS/Wasn-t-it-supposed-to-be-quot-Navigation-on-your-Nokia-Free/m-p/668305#M...
    Afterwards I installed the sis file you pointed me to and it worked. The maps on the phone were deleted, so I downloaded new ones over Nokia Ovi Suite and tried the navigation. Unfortunately it stills demands buying the licence for the navigation.
    I guess this is because the recommended sis file is v3.01 and not v3.03? Is that right?
    Any other solution?

  • IMAQ ClipboardToImage IMAQ Vision does not support the file type you specified.

    Hi.
    I have been trying out the inventeering INVENTvisionIMAQexample.vi. But i always encoutered
    an error in the INVENTvisionVFWcopy.vi of "IMAQ ClipboardToImage IMAQ Vision
    does not support the file type you specified." And the video window does not
    appear full size with real-time capture image. Does anyone encountered this problem as well? Please enlightened me. Thank you.

    What error it is throwing ? if you could attach the vi then it will be easy to find out the problem

  • Lightroom 3 does NOT support raw files for the  Canon Sureshot S95

    Have just bought the new Canon Sureshot S95
    after contacting Adobe support I am told Lightroom 3 does NOT support raw files for the
    Canon Sureshot S95.
    Come on Adobe.....please provide an update asap.

    (1) Well Boss I did what you said and used Canon DPP to convert to TIFFs. Choices are 8-bit TIFF or 16-bit TIFF - I chose 16-bit because part (90% part) of the reason for wanting to work in RAW is to keep the bit depth of teh original. On my EOS 40D it is supposedly 14 bits, which gives great scope to play with the levels & curves without seeing poster effects. If I choose 16 bit TIFF then each S95 image becomes a 70MB file, parallel to my JPEG and RAW.  Hardly a satisfactory solution.
    (I realise, however, that I don't actually know the bit depth of the S95 RAW file - anybody? ). 
    (2) SUGGESTION-  even if you are adding S95 support to the next update (which I dearly hope), be kinder to those with new cameras in general and allow LR to import JPEGs if it cannot import the RAWs (overriding if necessary the 'ignore JPEG' preference setting).  I am sure users with that preference would still prefer a JPEG than no picture at all!
    Since I discovered this compatibility problem, I switched the camera to record RAW+JPEG*. To my great irritation LR3 ignores the JPEGs even though it cannot load the RAWs.  So if I want to import from one supported camera (EOS40D) and one unsupported camera (S95) I have to keep going into preferences to switch on and off the 'ignore JPEG' function.
    JJ
    *  (this seems to be a setting that needs doing in the various different modes of the camera, by the way).

  • MS 2.1 'Does not support importing files containing tempo changes' message

    OK, so I've just loaded up the 2.1 upgrade and opened up a couple of existing concerts, and I get the following message:
    +File contains tempo changes+
    +One or more of the files you are importing contains tempo change markers. This version of mainstage does not support importing files with tempo changes.+
    It's a bit of a problem as the dialogue box appears several times during loading, and I have to click 'OK' every time, which adds to the length of time it takes to load up the concert (something I do several times during the course of my set).
    I'm not using any MIDI stuff, just acoustic and electric guitar plus vocal channel strips and playback channels.
    I've tried out some of my backing tracks, which have a ralletando at the back end, and they still seem to slow down properly (which isn't surprising, as they are audio files), and I've also tried setting all the sets back to the concert tempo, which hasn't stopped the issue occurring.
    Any thoughts, anyone?

    Hi Blueberry
    Well, if you mean I put a tempo curve at the end of some of my audio files in Logic, in order to slow down at the end of the song, then, yes, I did do that. However, that still works in MS2.1, and anyway, why would that no longer be allowed, as that is an essential musical function. Also, if the upgrade meant I had to re-do the exporting nearly 200 backing tracks, them I'm afraid it would be back to 2.01 for me.
    Furthermore, I tried starting MS up in 32 bit, and that didn't make any difference either.
    As it is, this problem is (so far) only an inconvenience as it takes longer for me to load a new concert. What I'd like to understand is what does it refer to? and how can I prevent it showing this message?
    Thanks

  • Yesterday i made some purchases in itunestore. the download went well. till the synch of itunes with ipod. some of the downloaded music did noch synchronize. the message was: the ipod does not support the file format (mp4). strange, right?

    Yesterday 20 november I have made some purchases in Ittunestore. The download went well. Till the synch of itunes with ipod. Some of the downloaded music did noch synchronize. The message was: the ipod does not support the file format (mp4). Strange, right? All the rest of downloaded music items has been synchronised without any problems. What may be the problem?

    For music files purchased via the iTunes Store, Apple has used the following file extensions -
    .m4a unprotected AAC format music files
    .m4p protected AAC format music files
    .m4b protected Audio Books
    .m4r unprotected ringtones in AAC format
    As you can see Apple have never used .mp4 for music files via the iTunes Store.
    For videos Apple use .m4v and these are in H.264 format.
    You could try changing the file extension to .m4a, first then see if it plays on your computer and then try re-synching it.

  • Does FCPX support .exr files?

    Does FCPX support .exr files?

    Industrial Light pioneers this codec; HDR (high dynamic range) file.  I'm not sure FCPX accepts it natively, so you may need to convert it to Apple ProRes first.  What camera are you using that records exr?  Also see link below:
    http://www.openexr.com

  • Does leopard support rar file

    Does leopard support rar file? or I need to download third party software to extract rar file.

    Archive Assistant should extract the contents of a .rar archive; however, if there are multiple segments it will not join them back together.
    -Douggo

  • Does iCloud support logic files

    Does icloud support logic files?

    The short answer is yes, but there are many Adobe programs - AdobeCS - Photoshop, Illustrator, InDesign, Acrobat, Flash, etc., etc.
    If you want to view or manipulate the files you will likely need the applications. Adobe Reader is free to view PDF files. Flash is also free - there may be others, but most are paid for (as in expensive) apps.

  • Does iMac support Adobe files

    does iMac support Adobe files

    The short answer is yes, but there are many Adobe programs - AdobeCS - Photoshop, Illustrator, InDesign, Acrobat, Flash, etc., etc.
    If you want to view or manipulate the files you will likely need the applications. Adobe Reader is free to view PDF files. Flash is also free - there may be others, but most are paid for (as in expensive) apps.

  • Does this support AVCHD files straight from the camera (Panasonic)??

    Does the new final cut pro X support AVCHD files from the camera?  I record with a Panasonic AG-HMC40.
    Thank you

    FCPX doesn't import AVCHD files from my Panasonic GH-2, even though importing works perfectly into iMovie.  So just because camera X imports natively into iMovie, it isn't certain it will import natively into FCPX.
    iMovie archives will always import because the AVCHD has already been converted to ProRes on import.
    In FCPX the AVCHD files from say a GH-2 can be edited natively if you don't want to re-render into ProRes, but to date I can't import them to test this.
    Chris.

  • Does iBook support internal links in PDF eBooks?

    Hello,
    I am creating an eBook in Adobe InDesign. After exporting to the PDF format I create internal hyperlinks in Adobe Acrobat that allow for better usability in the digital format.
    When I open the PDF eBook on the iTouch or iPad, these links do not even show up, let alone even work.
    Does iBooks even support links in PDF documents?
    These links work when opening in Adobe Reader and Adobe's Digital Editions eBook reader.
    Thanks,
    -Matt-

    This appears to suggest that it does, but with issues
    http://www.ipadprojectsbook.com/2010/06/22/ibooks-1-1-disoriented-pdf-links/

  • IDVD version 7.0.3 (1110) does not support .mov files???

    After the last software update (01.26.09) I can't open my projects made with iDVD 7.0.2 just some days before the update. While opening an old project I receive system message about lost video files. When I try to drag this files manually, I receive message: Unsupported File Type: Broken Reference Movie in: 'name of my .mov file. Meanwhile, the files are on the same place as before.
    Is somebody here who have met this problem? What to do? How to come back to previous iDVD version?

    Yes iDvd does still supports .mov
    However, it's a QT Reference movie you are dealing with and anytime you move this file from it's original location you'll confuse iDvd. The solution is to re-establish the link so that it's no longer a broken link.
    iDvd should give the option via a dialog box to find that particular asset before it proceeds any futher. Is it not offering you this option?

  • Does Aperture support RAW files from a Panasonic LUMIX DMC-FZ27 camera?

    Please can anyone let me know whether Aperture supports RAW files from a Panasonic LUMIX DMC-FZ27 camera? The Apple Aperture site lists support for DMC-F35 and other later cameras but does not allow a search for others.
    Many thanks.
    John

    Only the cameras on this list are supported:  Apple - Aperture - Technical Specifications - RAW Support
    Th FZ27 is not.
    For my Panasonic Lumix DMC-FZ28 I am using Adobe's free DNG Coverter to convert the RAW files to DNG. It does not always work, but for most of the RW2 files I can work in Aperture this way. The stubborn files I convert to TIFF.
    Download here:
    Adobe - Adobe Camera Raw and DNG Converter : For Macintosh 

Maybe you are looking for