Does iCloud accept emails forwarded from other domains ?

I used to forward emails from the dbradley.net email server directly to my .mac account and Apple stopped allowing forwarded emails. Now with iCloud can I forward dbradley.net email to my iCloud account ?
Dennis
<Email Edited By Host>

I have asked for your email address to be edited out. Posting your address in an open thread is a sure way to be bombarded by unwanted email, remember it will be here long after you have resolved your problem, for automated detection software to find.
If you want people to contact you, enable others to see your email address in your profile.
You can forward mail to any account, nothing in iCloud will stop you doing this.

Similar Messages

How do I accept emails only from single domain?

We've got a set of iPads at our elementary school using a single iCloud account. To control the type and amount of email going to their inbox, I'd like to block all emails except the ones sent from our school's domain. Is there an email rule I can set to do that?
Thanks!

I'm afraid the email rule options available on icloud.com don't provide this type of filtering. You might want to check other providers such as Gmail and Yahoo to see if they do, and if so, switch to one of these providers for your email.

I have changed ISP, my iPad does not accept email,ID or other changes.

We have changed our ISP and have a new email address. when I try to load different apps, Apple displays my old email address as ID and I can't change it.I was successful in changing my Email but cannot seem to change the profile info that Apple is using.

Hi heidi298,
Thanks for visiting Apple Support Communities.
You may want to use the same Apple ID on your iOS devices if you'd like to sync them or share purchases between them. You can use the steps in this article to troubleshoot your iCloud login:
iCloud: Account troubleshooting
http://support.apple.com/kb/ts3988
Best Regards,
Jeremy

Email forwarding from my own domain to my verizon email account is taking a long time...

Email forwarding from my own domain to my verizon email account is taking a long time.
I have email addresses registered at moniker.com. When I send an email to an email address that is forwarding to my verizon email, it takes a long time to arrive.

Hmmm ... none of the header is showing this hitting the Verizon edge anywhere along the line. At some point the header has to show the mail transiting vztpa.verizon.com or vzsac.verizon.com which are intake servers for messages headed for Verizon. What I'm see in the header so far is that it took about 4-6 seconds (depending on what clocks you believe) to make from one end of the connection to the other.
You got this out of your Verizon mailbox?

One Yahoo! mail account does not receive email sent from .mac

OK, this is an odd problem, and any help would be appreciated.
My girlfriend's Yahoo! mail account does not receive email sent from my .mac address. If I send email from my Gmail or Yahoo! accounts she receives the message. No one else has informed me that they haven't received email from the .mac address. Additionally, the .mac account is in her address book.
Anyway, has anyone seen a similar pattern with Yahoo! or any other email provider?
Thanks.
- Jennings

Thanks for the reply . . . and yes, the recipient's email provider likely holds the answer.
However, I was hoping someone here might have had a similar experience and could answer as the email provider is Yahoo, and they are slow in responding to help requests . . . for a period I hosted a personal, paid website through Yahoo Domains and help tickets lingered for several days on multiple occasions (this being the reason the site is no longer hosted by Yahoo). I also doubt Yahoo will expend too much energy resolving a problem for a free email account.
Anyway, I posted in the Yahoo mail forums, and hopefully something will come-up . . . .

How do you host a domain and several email addresses from that domain with OS X Server?

Right now I have a domain name through GoDaddy.com and one email address to that domain...we will have about 5-8 in total...How do I setup OS X Server to host our own domain (without using GoDaddy) and setup our own mail server?

There are several steps that you would need to do.
Set up OS X Server with mail services and users. Also, you may have to have your OS X mail server relay messages through your ISP so you can email people at other domains.
Set up firewall/router to forward IMAP/POP and SMTP ports from your external IP address to your server (which is either in the DMZ of the firewall or on LAN).
Set up DNS records so your domain name points to your server (and if you do not have a static IP address, you will need to set up dynamic DNS). At a minimum you will need 2 DNS records: an A (or AAAA for IPv6) record for the server (I think it can be the root of the zone) and a MX (mail exchange) record.
If everything is set up correctly, you should have a mail server hosting on your domain with your server.
Those would be the major steps you would need to complete. Details on the exact procedure for each of these steps can be found reading the OS X Server documentation, documentation for your router/firewall for port forwarding/NAT, and your specific DNS service.

Does iCloud save voicemail messages from my iphone 5 when I back up? More specifically I am trying to access messages that were in my deleted folder at the time I last saved, that have since been cleared.

Does iCloud save voicemail messages from my iphone 5 when I back up? More specifically, I am trying to access messages from my now deceased father that were in my deleted voicemail folder at the time I last saved, that have since been cleared.

The iCloud backup includes visual voicemail messages. I'm not sure if it includes the deleted ones or not, but I would assume it does.

Removing Email forwarding from email account in Powershell

Your help is appreciated -
I need to remove email forwarding from one user account. example: I utilized the Set-Mailbox -Identity "Kristin B" -ForwardingSMTPAddress "email address of recipient" I want to remove that forwarding).

Use
Set-Mailbox -Identity "Kristin B" -ForwardingSMTPAddress $null
This should remove the forwarding address

Does icloud delete email on all devices

Does icloud delete email on all devices?

iCloud doesn't. Whether or not this happens depends on the type of email account you are using. If you are using an IMAP email account such as iCloud email, Gmail or Yahoo, or an Exchange email account, when you delete an email (or read one or move it to a folder) on one device you will see these changes on your other devices. If, on the other hand, you are using a POP/POP3 email account, you won't see these changes on your other devices.

Can no longer open PDF files from my emails sent from other websites. Problem seems to correlate with automatic upgrade of free adobe software (from version 11 to Reader DC)?

Can no longer open PDF files from my emails sent from other websites. Problem seems to correlate with automatic upgrade of free adobe software (from version 11 to Reader DC)?

To configure the browser to use Acrobat or Adobe Reader to open PDF files:
1. Quit Internet Explorer(any other browser)
2. Start Acrobat or Adobe Reader.
3. Choose Edit > Preferences.
4. Select Internet in the list on the left.
5. Deselect(Uncheck) Display PDF in Browser, and click OK.
6. Restart Internet Explorer

When using panasonic remote2 app, videos shot on iPad appear upside down on the television. This does not happen with videos from other sources. Any suggestions?

When using panasonic remote2 app, videos shot on iPad appear upside down on the television. This does not happen with videos from other sources. Any suggestions?

Hi Steve
worldweary wrote:
Thanks again. I tried channel 13 and it seemed to work better, with less dropouts (albeit not perfect) but sadly my slightly ageing laptop wouldn't recognise the network at all with the Hub set to that channel, so I had to switch it back to 11!
Will try the factory reset at some point to see if that improves things.
I have the same issue with my iPad when streaming videos...like the issue posted on ‎25-04-2014 18h36 by Steve.
Steve - Can you kinldy clarify how you resolved the problem finally.
I was infact planning to change the iPad or sell it off due to this recurring problem.
Thanks and regards
Siva

Does iTunes offer a restore from other than current data on my pc? I've lost all my pictures because of lack of disk space on my pc.

Does iTunes offer a restore from other than current data on my pc? I've lost all my pictures because of lack of disk space on my pc.

Are you talking about restore of the iPhone from its backup, or something else? The first time you sync an iOS device on each calendar day iTunes will update the backup set for the device. If you remove data from the device and backup, then the backup of that data has gone. For this reason it actually makes sense to restore an iOS device periodically as, once used for a restore, the backup set is archived and a new one created.
Ideally you would have backed up these pictures somewhere. If you enabled it, you may find pictures in your Photo Stream.
In general you need to keep a backup copy of all your important files. iTunes will let you download most past purchases from the store but backing up other content is down to you. The user Backup your iTunes for Windows library with SyncToy suggests a way to do this for iTunes, but the same tool can be used to preserve other folders of data.
tt2

When jpeg's are sent as email attachments from other computers, they arrive on my imac as winmail.dat files that I can't open. What do i need to do to receive such attachments as jpegs that I can open?

When jpeg's are sent as email attachments from other computers, they arrive on my imac as winmail.dat files that I can't open. What do i need to do to receive such attachments as jpegs that I can open?

tommybwin wrote:
Perhaps go edit>attachments>always send windows-friendly attachments.
That has no effect on emails that you receive.

Why does iCloud send emails from my other accounts?

I send emails from my gmail or sbcglobal account and then can't find them. in some cases the recipient does not get them.
in other cases the person swears they responded but i did not get the email.
yesterday I hit the "iCloud" email by mistake and discovered that iCloud is sending them from a .me address!
how do I disable this???
and, why does this happen in the first place?
thanks.

hi! thanks for your reply, pvonk, but I am not sending from the .me address, I am selecting the gmail or sbcglobal address from my options - but .me is sending it instead! it is defaulting to the .me address regardless of what i pick. I find this disturbing. is it something Apple is doing? thanks for any insight.

ACS forwarding from untrusted domain 0x80090325 SEC_E_UNTRUSTED_ROOT

I have SCOM 2012 R2 Update Rollup 4 installed with 2 management servers running WS12R2 in a single management group in my main AD domain. One of the management servers is also an ACS collector. I have an untrusted AD domain, with a SCOM gateway server in
it, and I used the gateway to install a SCOM agent on a domain controller in that domain. Now I am trying to configure an ACS forwarder on that untrusted domain controller to talk to the ACS collector back on the management server.
However, when I restart the
Microsoft Monitoring Agent Audit Forwarding service on that domain controller, I get this error in its
Event Viewer > Apps and Services > Operations Manager:
1/23/2015 5:08:01 PM Source AdtAgent Event ID 4369 Forwarder unsuccessfully tried to connect to the following collector(s):
<acsCollectorFQDN>:51909, status: 0x80090325 (TCP connect), source:registry addresses tried: <IP>:51909. If the list of collectors is blank, then AdtAgent was unable to locate a collector. Common reasons for this message are: The machinef(s)
listed is not online. AdtServer is not running on the machine(s) listed. AdtServer on the machine(s) listed is not listening on the specified port. TCP connectivity to the AdtServer machine is blocked by firewall, IPSec, or other filtering mechanism AdtServer
on the machine(s) listed actively refused the connection (due to policy or current activity load). For detailed failure information, enable trace logging using the TraceFlags registry key and examine the AdtAgent.log in the \temp subdirectory of the Windows
directory.
I followed these two articles in order to set up the ACS forwarder on the DC in the untrusted domain: "How to configure security events collection by using Audit Collection Services from computers in untrusted environment?" {1/3/12}https://gefufna.wordpress.com/2012/01/03/how-to-configure-security-events-collection-by-using-audit-collection-services-from-computers-in-untrusted-environment/ "Forwarder
is unable to connect to collector Event id 4369 in forwarder event view" {5/5/14}
http://jimmy-scom.blogspot.com/2014/05/forwarder-is-unable-to-connect-to.html
EXTRA INFO Here are the detailed steps that I took (sorry for all this, but there are an awful number of steps!):
1) I confirmed that the agent for the DC shows as Healthy in OM Console > Monitoring > Operations Manager > Agent Details > Agent Health State > Agent State (right) pane.
2) On the ACS collector, I stopped
Operations Manager Audit Collection Service, then from Admin cmd prompt I did this:
c:> cd \windows\system32\security\adtserver
c:> adtserver –c
} 1 certificates found for server authentication usage.
Enter the number of the certificate you want AdtServer to use for authenticating to AdtAgent or 0 to quit without saving: 1
Certificate 1 selected. Attempting to save thumbprint to registry ...
success.
Then I started
Operations Manager Audit Collection Service.
3) On the DC in the untrusted domain, from Admin cmd prompt I did this:
c:> cd c:\windows\system32
c:> adtagent -c
} No Issued To Issued By Expires
Thumbprint
1: <untrustedDCfqdn> <untrustedDomainCA> 2015-11-30 02:44:58 <thumbprint>
2 certificates found for client authentication usage.
Enter the number of the certificate you want AdtAgent to use for authenticating to AdtServer or 0 to quit without saving: > 1
} Certificate 1 selected. Attempting to save thumbprint to registry… success.
4) On the DC in the untrusted domain, I opened mmc > Certificates > Local Computer > Personal > Certificates > I exported the certificate from step 3 to a DER encoded binary X.509 (.CER) file.
5) I also looked at the Certification Path for the certificate, and figured out which certificate is its Root CA certificate. I copied that certificate to a DER encoded binary X.509 (.CER) file.
6) I copied the first .CER file to a computer in my main domain, which is at 2012 R2 level. From AD Users and Computers, I created a "dummy" computer object using the NetBios name of the DC back on the untrusted domain. I right clicked the computer
object > Named Mappings > I added the .CER file, and left "Use Subject for alternate identity" checked. I unchecked "Use Issuer for alternate security identity".
7) I copied the Root CA certificate .CER file over to the SCOM management server that doubles as my ACS collector, and from there I did mmc > Certificates > Local Computer > Trusted Root Certificates > Certificates > I imported the Root
CA certificate.
8) I also went to my CA server on my main domain, I ran pkiview.msc > right clicked “Enterprise PKI” > Manage AD Containers > NTAuthCertificates tab > and I imported the Root CA certificate there as well.
9) I ran telnet from the DC on the untrusted domain, and confirmed that port 51909 is open from there to the ACS collector on the main domain.
10) I enabled audit collection fot the DC on the untrusted domain. I did this from OM Console > Monitoring > Operations Manager > Agent Details > Agent Health State > Agent State (second column in middle pane) > I selected the Healthy <untrustedDCfqdn>
> I clicked Enable Audit Collection.
Then under "Task Parameters" > i clicked [Override] > for New Value I specified <ACScollectorFQDN>. For task credentials I specified Other account, and specified a domain admin account in the untrusted domain. The result was "The
task completed successfully. Enable Audit Collection, status:Success".
11) On the ACS collector, I restarted Operations Manager Audit Collection Service. On the DC in the untrusted domain I restarted Microsoft Monitoring Agent Audit Forwarding service.
12) Result was this error on the DC in the untrusted domain, in its
Event Viewer > Apps and Services > Operations Manager
1/23/2015 5:08:01 PM Source AdtAgent Event ID 4369 Forwarder unsuccessfully tried to connect to the following collector(s):
<acsCollectorFQDN>:51909, status: 0x80090325 (TCP connect), source:registry addresses tried: 10.1.1.91:51909. If the list of collectors is blank, then AdtAgent was unable to locate a collector. Common reasons for this message are: The machinef(s)
listed is not online. AdtServer is not running on the machine(s) listed. AdtServer on the machine(s) listed is not listening on the specified port. TCP connectivity to the AdtServer machine is blocked by firewall, IPSec, or other filtering mechanism AdtServer
on the machine(s) listed actively refused the connection (due to policy or current activity load). For detailed failure information, enable trace logging using the TraceFlags registry key and examine the AdtAgent.log in the \temp subdirectory of the Windows
directory.
13) On the DC in the untrusted domain I created DWORD reg value
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\AdtAgent\Parameters\TraceFlags and set it to 524420 decimal. The resulting c:\windows\temp\AdtAgent.log file only confirmed that I'm getting 0x80090325 errors.
After all this, why am I getting 0x80090325, which translates to SEC_E_UNTRUSTED_ROOT ??? Did I do something wrong in steps 5, 7 and 8? Thanks for reading all the way through :)
Marko

Thanks Yan Li, you gave me an idea. I got the ACS forwarder in the untrusted domain to work (!), by analyzing the setup on the SCOM gateway that I set up in the untrusted domain. I issued the ACS forwarder a certificate from the domain that SCOM is in, INSTEAD
of configuring the ACS forwarder to use the certificate that it already had from its own domain.
So the new procedure is: do steps 1 and 2, then instead of step 3 I did this…
2B) I issued a certificate from the AD domain containing SCOM to the domain controller in the untrusted domain that is my ACS forwarder. I did this from the AD Certificate Services web site, and asked it to use certificate template that I created for the
SCOM gateway server in the untrusted domain.
2C) The new certificate appeared in the Personal store of the domain controller. I exported it, then ran the MomCertImport utility so that I would not get an error in the next step (per
http://www.systemcentercentral.com/scom-deployment-across-multiple-networks/)
3) On the domain controller in the untrusted domain, I re-ran "adtserver -c", and selected the new certificate.
3B) I then ran “MomCertImport /Remove”, since I already have a SCOM gateway in the untrusted domain.
Then I proceeded with steps 4, skipped 5, did 6, skip 7-8, did 9-11, result was this on the DC in the untrusted domain, in its Event Viewer > Apps and Services > Operations Manager
2/3/2015 12:20:01 PM Source AdtAgent Event ID 4368 Forwarder successfully connected to the following collector:
<ACScollectorFQDN>:51909, status: 0x0 (success), source: registry
addresses tried: <IPaddress>:51909
ACS forwarding works now! I will confirm by repeating the procedure for another domain controller in the untrusted forest.
Marko

Does iCloud accept emails forwarded from other domains ?

Similar Messages

Maybe you are looking for