Does iCloud save my data more than once when i back it up?

I only have about 75 contacts and 165 pictures, which is the only thing I have on iCloud and the only thing I want to have saved. My iCloud keeps telling me that my storage is full but theres barley anything in it? It's a 5GB but still it shouldn't be full and I can't find my photos on iCloud

Apple states that it keeps up to 3 backups. Your camera roll photos are stored in your backup, but can't be viewed unless you restore the backup to your phone. You may have other data taking up the space in your account, such as email, app data, the data you sync with your iCloud account (contacts, calendars, reminders, notes, etc.), etc.
This guide gives you options for managing and reducing the amount of data you have stored in your iCloud account: http://support.apple.com/kb/ht4847.

Similar Messages

Archiving same data more than once due to overlapping variant values

Hi all,
i had accidently run 2 archiving jobs on the same data. For instance, job 1 was archiving for company code IN ( where the company code was from IN00 till ZZ00), which was the unwanted job. The second archive job archived data from IN99 till INZZ ( not the whole IN company code ).
These 2 jobs failed due to log fulll ( the data was too huge to be archived), however when i expand the jobs in the failed SARA session, the archive files has up to 100 MB size.
Below are some of the problems which will incur if we archive the same data more than once ( which i found from my online search )
- some archiving objects require that data only exists once in the archive therefore duplicate data can lead to erroneous results in the totals of archived data
- Archiving the data again will affect checksum. Checksum normally conducted before and after archiving process and its purpose is to validate whether the same file contents exist in the newly created archive files as compare the original data.
Could anyone advice me on how to overcome this multiple archiving on the same data issue. Apart from above stated impact, what are the other problems of multiple archiving on same data?
The failed archived sessions are currently in "Incomplete Archiving Session" and in 1 week time they will be deleted by archive delete jobs and will be moved to "Completed Archive Session". I highly appreciate if anyone could help
Source of finding:
http://help.sap.com/saphelp_nw73/helpdata/en/4d/8c7890910b154ee10000000a42189e/content.htm
http://help.sap.com/saphelp_nwpi71/helpdata/en/8d/3e4fc6462a11d189000000e8323d3a/frameset.htm
http://help.sap.com/saphelp_nw70/helpdata/en/8d/3e4fc6462a11d189000000e8323d3a/content.htm

Hello,
There are several issues here. In this case it seems pretty clear cut that you did not want the first variant to be executed. Hopefully none of the deletions have taken place for this archive run.
In cases where you have overlapping selection criteria and some of the deletions have been processed you can be in a very difficult situation. The best advise that I have would be to check your archive info structure CATALOG definition and make sure that both the archive file and the offset fields are set to DISPLAY fields and not KEY fields.
If your file and offset are key fields then when you use the archive info structure you would pull up more than one copy of the archived document.
Example: FI document 12345 was archived and deleted in archive run 1 and archive run 2.
The search for the archive info structure when the file and offset are keys fields would return two results.
12345 from run 1
12345 from run 2
If the CATALOG has the file and offset as display only fields you would only return one result
12345 from (whichever deletion file was processed first)
The second deletion process would have a warning message in the job log that not all records were inserted.
Please note that any direct access of the data archive file that bypasses the archive info structure and goes directly to the data archiving files would still show two documents and not a single document.
Regards,
Kirby Arnold

ICloud has added some albums more than once when viewed on my iPad.Is it possible to delete the unwanted extra copies.

How do I erase unwanted albums from iCloud.On my iPad the same album has been added more than once yet on my mac with iCloud there are no issues.

I assume you mean photo albums. How were these albums added in the first place? Where they created on your iPad? Do they have the same name?

HOW TO IMPORT DATA MORE THAN ONCE FROM THE SAME EXPORT DUMP FILE?

before asking my question i'd like to mention that i'm a french spoke...
so my english is a little bit bad. sorry for that.
my problem is : IMPORT
how to import data a SECOND TIME from an export dump file within oracle?
My Export dump file was made successfully (Full Export) and then i
tried to import datas for the first time.
I got this following message in my logfile: I ADDED SOME COMMENTS
Warning: the objects were exported by L1, not by you
. importing SYSTEM's objects into SYSTEM
REM ************** CREATING TABLESPACES *****
REM *********************************************
IMP-00015: following statement failed because the object already exists:
"CREATE TABLESPACE "USER_DATA" DATAFILE 'E:\ORANT\DATABASE\USR1ORCL.ORA' SI"
"ZE 3145728 DEFAULT STORAGE (INITIAL 10240 NEXT 10240 MINEXTENTS 1 MAX"
"EXTENTS 121 PCTINCREASE 50) ONLINE PERMANENT"
IMP-00015: following statement failed because the object already exists:
"CREATE TABLESPACE "ROLLBACK_DATA" DATAFILE 'E:\ORANT\DATABASE\RBS1ORCL.ORA"
"' SIZE 10485760 DEFAULT STORAGE (INITIAL 10240 NEXT 10240 MINEXTENTS "
"1 MAXEXTENTS 121 PCTINCREASE 50) ONLINE PERMANENT"
etc........
IMP-00017: following statement failed with ORACLE error 1119:
"CREATE TABLESPACE "L1" DATAFILE 'E:\ORADATA\L1.DBF' SIZE 1048576000 "
"DEFAULT STORAGE (INITIAL 10240 NEXT 10240 MINEXTENTS 1 MAXEXTENTS 121 PCTIN"
"CREASE 50) ONLINE PERMANENT"
IMP-00003: ORACLE error 1119 encountered
ORA-01119: error in creating database file 'E:\ORADATA\L1.DBF'
ORA-09200: sfccf: error creating file
OSD-04002: unable to open file
O/S-Error: (OS 3) The system cannot find the path specified
--->etc..........
the drive E: with the folder E:\ORADATA didn't exist, but after
all that i created it.
see below, before my IMPORT statement
REM ********************* CREATING USER *********
REM ********************************************
IMP-00017: following statement failed with ORACLE error 959:
"CREATE USER "L1" IDENTIFIED BY VALUES 'A6E0DAA6865E7627' DEFAULT TABLESPACE"
" "L1" TEMPORARY TABLESPACE "TEMPORARY_DATA""
IMP-00003: ORACLE error 959 encountered
ORA-00959: tablespace 'L1' does not exist
IMP-00017: following statement failed with ORACLE error 959:
"CREATE USER "MLCO" IDENTIFIED BY VALUES '56AC6447B7D50467' DEFAULT TABLESPA"
"CE "MLCO" TEMPORARY TABLESPACE "TEMPORARY_DATA""
IMP-00003: ORACLE error 959 encountered
ORA-00959: tablespace 'MLCO' does not exist
ETC.......
REM ********************* GRANTING ROLES ***********
REM ************************************************
IMP-00017: following statement failed with ORACLE error 1917:
"GRANT ALTER ANY TABLE to "L1" "
IMP-00003: ORACLE error 1917 encountered
ORA-01917: user or role 'L1' does not exist
ETC.........
IMP-00017: following statement failed with ORACLE error 1918:
"ALTER USER "L1" DEFAULT ROLE ALL"
IMP-00003: ORACLE error 1918 encountered
ORA-01918: user 'L1' does not exist
-- that is normal, since the creation of the
tablespace failed !!
REM******************************
IMP-00015: following statement failed because the object already exists:
"CREATE ROLLBACK SEGMENT RB_TEMP STORAGE (INITIAL 10240 NEXT 10240 MINEXTENT"
"S 2 MAXEXTENTS 121) TABLESPACE "SYSTEM""
IMP-00015: following statement failed because
. importing SCOTT's objects into SCOTT
IMP-00015: following statement failed because the object already exists:
"CREATE SEQUENCE "EVT_PROFILE_SEQ" MINVALUE 1 MAXVALUE 999999999999999999999"
"999999 INCREMENT BY 1 START WITH 21 CACHE 20 NOORDER NOCYCLE"
ETC............
importing L1's objects into L1
IMP-00017: following statement failed with ORACLE error 1435:
"ALTER SCHEMA = "L1""
IMP-00003: ORACLE error 1435 encountered
ORA-01435: user does not exist
REM *************** IMPORTING TABLES *******************
REM ****************************************************
. importing SYSTEM's objects into SYSTEM
. . importing table "AN1999_BDAT" 243 rows imported
. . importing table "BOPD" 112 rows imported
. . importing table "BOINFO_AP" 49
ETC................
. . importing table "BO_WHF" 2 rows imported
IMP-00015: following statement failed because the object already exists:
"CREATE TABLE "DEF$_CALL" ("DEFERRED_TRAN_DB" VARCHAR2(128),
IMP-00015: following statement failed because the object already exists:
"CREATE SYNONYM "DBA_ROLES" FOR "SYS"."DBA_ROLES""
IMP-00015: following statement failed because the object already exists:
"CREATE SYNONYM "DBA_ERRORS" FOR "SYS"."DBA_ERRORS""
IMP-00008: unrecognized statement in the export file:
. importing L1's objects into L1
IMP-00017: following statement failed with ORACLE error 1435:
"ALTER SCHEMA = "L1""
IMP-00008: unrecognized statement in the export file:
J
Import terminated successfully with warnings.
-------------------------------------b]
So after analysing this log file, i created
the appropriate drives and folders... as the
import statement doesn't see them.
E:\ORADATA G:\ORDATA etc...
And i started to [b]IMPORT ONE MORE TIME. with:
$ IMP73 sys/pssw Full=Y FILE=c:\temp\FOLD_1\data_1.dmp BUFFER=64000
COMMIT=Y INDEXFILE=c:\temp\FOLD_1\BOO_idx.sql
LOG=c:\temp\FOLD_1\BOO_log.LOG DESTROY=Y IGNORE=Y;
after that i could not see the users nor the
tables created.
and the following message appeared in the log file:
Warning: the objects were exported by L1, not by you
. . skipping table "AN1999_BDAT"
. . skipping table "ANPK"
. . skipping table "BOAP"
. . skipping table "BOO_D"
ETC.....skipping all the tables
. . skipping table "THIN_PER0"
. . skipping table "UPDATE_TEMP"
Import terminated successfully without warnings.
and only 2 new tablespaces (originally 3) were
created without any data in ( i check that in
the Oracle Storage manager : the tablespaces exit
with 0.002 used space; originally 60 M for each !!)
so,
How to import data (with full import option) succefully
MORE THAN ONE TIME from an exported dump file ?
Even if we have to overwrite tablespaces , tables and users.
thank you very much

The Member Feedback forum is for suggestions and feedback for OTN Developer Services. This forum is not monitored by Oracle support or product teams and so Oracle product and technology related questions will not be answered. We recommend that you post this thread to the appropriate Database forum.
The main URL is:
http://forums.oracle.com/forums/index.jsp?cat=18

JDBC sender adapter polling data more than once within one polling interval

Hi,
Our sender communciation channel is polling data twice in one polling interval, hence triggering the corresponding BPM twice.
The polling interval for the channel is set to 30 mins.
We dont have an update query and use <test> instead. Currently there is no provision to use an update query in the source system.
Intermitently the polling happens within an interval of few milliseconds, because of which we are in doubt whether the use of Update query will solve our problem
Additionaly in the BPM, we have one channel which deletes the data from source system after the processing is complete by the BPM, but the second BPM is getting triggered before the deletion step is being executed in the first BPM.
Please Advise how we can stop the channel from polling data twice.
Thanks,
Merrilly.

Hi Merrilly,
Please ty to set an advanced mode option in the table(for sender
channel configurations) as follows:
Key name is "clusterSyncMode" and its values are either "scheduler" or
"none".(both are without quotes and case-sensitive)
Default value is "scheduler", this means it prevents 2
messages being generated regardless of 2 server nodes. This is true,
even if you do not add anything in advanced options table.
Also are more information about this parameter of file adapter, what
is the same for jdbc:
#801926 - XI 3.0 File Adapter: Additional Parameters
Regards
SK

Why does it show a user more than once in Users On...

At times I see that the same forum id is shown logged in twice on the Users Online
Is this just me going mad?
-+-No longer a forum member-+-

Hi DS,
That happens when the site's related cookies (viewable under options in your browser) have not cleared and the timeout session has not been registered. It doesn't affect your minutes online so you can either delete your cookies or just let it be. It has no negative effect so no need to worry.
Thanks.

Triggering workflow more than once during wait hrs

Dear All,
We have implemented two Z (ZAPFI_INV, & ZFI_INV_PARK) workflows for FI
park invoice. ZFI_INV_PARK is the query workflow and ZAPFI_INV is the
approval workflow.
Both workflow start with checking whether if image (i.e. FI invoice) is
attached with the document or not. If the image is not attached, the
workflow will wait 3 hrs for the image attachment. If the image gets
attached within 3 hrs, workflow will move further for approval or query
process.
But if the same document is "parked" or "save-as-completed" more than
once within the waiting time frame of 3 hrs, then more than one
workflow process starts & resulting same WI more than once in the useru2019s inbox.
Kindy advice.

Is it possible to put the Validation at Application Level (rather that doing changes in Workflows as they are working correctly)?
May be you can log the Invoices in ZTABLE when they are parked and Flag them as marked once processing is complete.
Regards
Shital

Duplicate entries / Employee is appearing twice in report (OR more than onc

Duplicate entries / Employee is appearing twice in report (OR more than once)
When I hire an employee, I assign the position, and based on the positions other values get defaulted /assigned to that employee.
I have one case where employee has been assigned to one position, but with different position descriptions, and in report it is showing duplicate entries for the same personnel number, now client need for one personnel number only one row to display in report
Also I tries to run , Birthday list standard report , it is also showing 2 entries (Or sometime more than 2)for the same personnel number , May I know why this is happening?
And how to fix this bug
Thanks and Regards
Jaydeep Jadhav

Hi,
Can you check where the code is written to get employees from position, there may be two cases where multiple records exists for single person.
1) When getting data for pernr assigning to a position they may missed out date condition. If so we need to bring only active positions assigned to that employee.
2) There may be multiple positions assigned to a single person. In this case you need to ask the client what you need to do.
Delete adjacent duplicate is may not be correct solution as which position we need to delete is not sure. You check above two cases and go head.
Hope this information will help you.
Regards,
Narendra.Soma

Performance... Why a function column in a view is executed more than once...?

Why a function column created inside a view is executed more than once when called more than once?
EXAMPLE:
create or replace view aux1 as
date_column,
any_function(date_column) column1
from any_table
create or replace view aux2 as
column1 c1,
column1 c2,
column1 c3
from aux1
select * from aux2
It will execute 3 times the function any_function... logically the value will be the same for all columns...
I understand why!... are 3 calls... but...
Why not to create a "small" verification and if the function column was execute replace the second, the third... value? ... instead of execute 3, 4... times...
tks
Braga

Actually, this is more than a performance issue. This is a consistency problem. If the function is NOT deterministic then you may get different values for each call which is clearly not consistent with selecting 3 copies of the same column from a row. Oracle appears to have fixed this in 9i...
Connected to:
Oracle8i Enterprise Edition Release 8.1.7.2.0 - Production
With the Partitioning option
JServer Release 8.1.7.2.0 - Production
create view v1 as select dbms_random.value(1,100) r from dual;
create view v2 as select r r1, r r2 from v1;
select * from v2;
          R1           R2
          93           74
Connected to:
Oracle9i Enterprise Edition Release 9.0.1.3.0 - Production
With the Partitioning option
JServer Release 9.0.1.3.0 - Production
create view v1 as select dbms_random.value(1,100) r from dual;
create view v2 as select r r1, r r2 from v1;
select * from v2;
          R1           R2
          78           78Richard

Since I updated to iCloud, Mail on my MacBookPro 10.6.8 has been unable to connect to MobileMe more than once or twice per day. Mail on my iPhone 4 has no problems. What's wrong?

Since I updated to iCloud, (which may or may not be related) Mail on my MacBookPro 10.6.8 has been unable to connect to MobileMe more than once or twice per day. Mail on my iPhone 4 and my old iMac has no problems. When there is no service a yellow warning triangle appears adjacent to the Inbox and Connection Doctor reports,"Trying to log into this MobileMe IMAP account failed. Verify that username and password are correct." Since it does fetch Mail from time to time they cannot be wrong.... can they? Should I update to 10.7 and if so what does that entail?

You have been using MobileMe's email settings, which sometimes continue to work for a time after migration but then get turned off. iCloud's mail server settings are different. Strictly speaking Lion 10.7.2 is required for iCloud, and on that Mail is set up automatically.
Snow Leopard cannot access most of iCloud's facilities, however you can set Mail up manually to access your email. The method is described here:
http://www.wilmut.webspace.virginmedia.com/notes/icloudmail.html
The situation with iCloud and Snow Leopard is described in detail here:
http://www.wilmut.webspace.virginmedia.com/notes/icloudSL.html

Using firefox 5 - when ever I try to use the same key more than once in a row, it does not work. Hitting the multiple times does nothing at all. How can this be corrected. HELP!!!

everything that needs to be done on the keyboard is effected - letters, numbers, backspace, directionals, delete, home, end, page up, page down, '''all keys that are pressed more than once''' It does not matter what webpage I am on.
PLEASE HELP
this is very frustrating

You may have switched on an accessibility feature called FilterKeys by keeping the Shift key pressed for too long.
* http://www.microsoft.com/enable/products/windowsxp/default.aspx
*http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/access_filterkeys_turnon.mspx?mfr=true

Does iCloud save voicemail messages from my iphone 5 when I back up? More specifically I am trying to access messages that were in my deleted folder at the time I last saved, that have since been cleared.

Does iCloud save voicemail messages from my iphone 5 when I back up? More specifically, I am trying to access messages from my now deceased father that were in my deleted voicemail folder at the time I last saved, that have since been cleared.

The iCloud backup includes visual voicemail messages. I'm not sure if it includes the deleted ones or not, but I would assume it does.

How do u save datas more than one table using net beans ide using JSF

Hi,
I am new to JSF.
I save / delete / update / New master table using POJO (Plain Old Java Objects), database - oracle and Toplink Persistence Unit.
How do u save data more than one table using net beans ide using JSF (I am using POJO) ?
and also Tell me the reference book for JSF.
Thanks in advance.
regards,
N.P.Siva

SivaNellai wrote:
I am new to JSF.
So, I am using net beans IDE 6.1 from sun microsystem. It is a free software.No, you don't drag'n'drop if you're new to JSF. Switch to source code mode. Write code manually, with the help of IDE for the speed up.
So, please guide me the reference books, articles. I need the basic understanding of JSF, net beans IDE.[JSF: The Complete Reference|http://www.amazon.com/JavaServer-Faces-Complete-Reference/dp/0072262400] is a good book. The [JSF specification document|http://jcp.org/aboutJava/communityprocess/final/jsr252/index.html] is also a good reading to understand what JSF is and how it works. There are also javadocs and tlddocs of Sun JSF Mojarra.

I have my catalog "Back Up Each Time Lightroom Exits" checked, and always have. That means the catalog should have been backed-up and saved everyday, if not more than once on some dates. So with a a major problem now and needing to use the Catalog backup

I have my catalog "Back Up Each Time Lightroom Exits" checked, and always have. That means the catalog should have been backed-up and saved everyday, if not more than once on some dates. So with a a major problem now and needing to use the Catalog backup from last Friday, I go to my Lightroom Backups folder - and the most recent one showing not only isn't yesterday, it's OCTOBER 28 !?? Where the hell are the daily backups between October 28 and November 14?

Oh wow - JET LAG strikes agin - my apologies; I have located the missing weeks of back-ups. After getting home from a 30-day trip to Europe, I had changed the location of my LR catalog back-ups to an external drive, and forgot that I did that. I have found them, and all is good. Never operate Heavy Machinery without enough rest. Cheers

Data output more than once

Hello Experts
I'am facing a peculiar problem pertaining to Infoset query ( Tran SQ01,SQ02, SQ03) . The requirement is to create a query based on table GLPCA and CATSDB.
I've created the query as required, However when i execute the same the output is incorrect. What really happens is the Same line is repeated more than once sometimes three, four or even five times.
The Table GLPCA has two line items per document one debit and one credit, now at the most in the query i should get only these two lines and if i further filter it on the indicator there shoul be only one entry. However this is not the case even when i filter i on the posting indicator the query outputs the line item 5 times giving a wrong report.
Can somebody suggest as what could be wrong with the query
Thanks
Nelson

Hi,
Nothing is wrong with the query.
Kindly check ur join condition in SQ02
I have created its coming correct.
Regards
Arbind

Does iCloud save my data more than once when i back it up?

Similar Messages

Maybe you are looking for