Does IDCS5.5 save screen position

Greetings,
I am disappointed that CS5 is jerky and always opens at full screen and that it saves at whatever page is being worked on, but won't save upon returning to page one, so that the file subsequently opens at page one.
Why does it bother me that IDCS5 always opens full screen ? Because everytime I open it I have to make it smaller to gain access to my file system, each chapter is in text edit and I like to have it open behind the book spreads so I can update the text file if I want to.
Older versions of InDesign opened at the magnification and position they were saved in and were much more user friendly in that regard. The IDCS5 is so jerky it is tough to position it without a concentrated struggle (for me).
If IDCS5.5 addresses these issues I will buy it in a flash. Really, it's a little boring to delete a letter on page one and then put it back so IDCS5 willopen on page 1
Cordially,
Garrett

Naw. It's easier to delete a period and put it back.
I've been with Adobe since the Nineties, in those days one was continuously surprised by new ways considerate Adobe developers thought of to make life easy for loyal customers.
I'll wait for rave reviews before I upgrade again. Perhaps the sign will be the return of show-off Adobe art instead of the bland and incorrect geometry of bureaucratic cubism.
Cordially,
Garrett

Similar Messages

Where does SAP save form position and sizes?

On my custom forms created with the SDK the SAP client saves the column sizes of matrix fields (CPRF) using the standard functionality but the form size and position is not saved.
Does anyone know where SAP stores the form size and position for standard forms? I'd like to try to get this to work for my custom forms as well.
Thanks!

Hi William,
I looked at this before and my conclusion was that the UserPrefs column of the OUSR table holds this information. When the user closes SBO, changes to the window sizes and locations are written back to this field. I checked this by doing the following (on a test database):
1) Stored the current value of the UserPrefs field for the user in a temporary location.
2) Logged on as the user and made changes to the size and location of certain windows.
3) Logged out and then back in again to make sure that the new locations were saved. All windows that I'd changed still held their new sizes and locations.
4) Logged back out and then ran an update statement to revert just the UserPrefs field back to its previous value.
5) Logged back in and the screens had reverted back to their original sizes and locations.
The problem is that this field has an image data type so it's impossible to decipher (and, even if you could, you can't directly alter the data in this field).
Regards,
Owen

Snow Leopard does not remember screen position with dual monitor

Hello,
I have an external monitor, which I like to be on top of my Macbook Pro monitor. In the monitor preference pane, I can set the monitor disposition such that my external monitor (main monitor) appears on top of my laptop (secondary monitor). However, every time I unplug the external monitor, I have to do the settings again, because when I plug it back, it shows as "side-by-side" configuration.
How can I make this setting stick ?
Thanks

Try deleting a related plist:
~yourUserName/Library/Preferences/com.apple.systempreferences.plist
Then reset position.

Is there a way that when using airplay with power point the ATV does not sleep/screen saver frequently

s there a way that when using airplay with power point the ATV does not sleep/screen saver frequently???

I have done this for several Titles, using Photoshop and a Layer Mask, that gets "erased," revealing the letters. My Titles were of "handwriting with chalk" on a blackboard, so I could keep the edge of that Layer Mask, looking more like the "chalk." Photoshop also makes it easy to output Layer Comps for each "step" in the handwriting process. IIRC, I did about 5 Frames per Layer Comp on Import, but do not recall if I used an extremely short Cross-Dissolve Transition between those - I intened to do so, but just do not remember if I liked that, or went with just the Still Images? Will try to find that animation, and maybe create a full tutorial of the process. In my case, I also added an SFX of chalk on a chalkboard.
If you have Photoshop, it's really quite easy to pull off.
Now, I do not know if Photoshop Elements has Layer Masks yet, which make it so very easy to accomplish. One could do it backward, where the Text Layer gets Erased, and then one would have their full Image as the last in the sequence, and then the next would have a little bit of the Text removed, then a bit more, then a bit more - going backward, until the "writing surface" is clean. One could also do this with a Transparent Background, so that one saw the Video below, and no actual "writing surface" visible.
Good luck,
Hunt

Does the ipod nano save the position in a track when you turn it off?

Hello friends,
I listen to a lot of Dhamma talks that tend to be 30 minutes to an hour long. I am considering getting an ipod nano. The reason is that my current mp3 player, an old sony walkman, will forget the position of the track I am listening to if I turn it off and come back to it in a few days. Will the ipod nano save the position of where I am, even if i turn it off and come back to it a week later? Also, which generations have this feature and which do not?
EDIT:
Reading a few posts, it seems that the new ipod nanos will forget the track, just like my walkman. Which of the old generation ipod classics and nanos have this feature?
Thank you.
May you fare well,
James

If you have Shake to Shuffle turned off and you push the sleep button it shouldn't change songs in your pocket. Mine doesn't.

My version of LR-5.7 (OS X 10.8.5) apparently does not save the .NEF (Nikon RAW) edits done in the basic module.

My version of LR-5.7 (OS X 10.8.5) apparently does not save the .NEF (Nikon RAW) edits done in the basic module. That means that I can correct exposure, highlights, shadows etc. but once I go to another picture and returned to the edited one the histogram (on the edited photo) and specifically the clipping triangles are white or some other color. This is normally suppose to indicate that some channel or all channels are clipped in the highlight/shadow areas. If I adjust any slider in the Basic panel even as little as one +/- value or press the J-key, the histogram will now show the original edit. Moving on to another photo and then returning to to previously edited one and again the edits are "not saved" and I have to hit the J-key or adjust a slider to see the previously edited information reflected in the histogram.
This is especially frustrating for fours reasons. If I have edited a shoot and return to it I cannot see from the clipping information whether the original edit was correct and of course I might re-edit it (to some now incorrect value). This brings up the second issue synchronization. I can't rely on it because if I go back to fine tune a specific image in the batch the triangles are white or some other color for that and every image. I have to hit the J-key to show/hide clipping or the back slash key to see before/after previews. This is the third issue which is very time consuming and inefficient regarding my workflow. The forth issue is that I have noticed that normally when an image is saved in PS, LR adds a copy of the saved version to its catalogue. I have noticed that the PS to LR saves are all wrong in terms of exposure (they are much lighter in tone) than the original LR edit and the PS edit on my screen. If I check the PS to LR photo in LR I notice that the Basic panel values have been changed and that I have to sync the image with the originally edited RAW/NEF LR file to get it to look the same.
Note 1). I am using an Apple cinema display and a calibrated Eizo ColorEdge monitor to view my NEF files. I have reverted back to using LR 4 however I am not sure if I should expect compatibility problems with Camera Raw 7.4 in LR 4 vs. Camera Raw 8.6 in LR 5.
Note 2.) I am going to do an import converting everything to .dng to see if this is a work around.
Note 3). I would be interested in knowing if this issue is related to the PS RAW engine ver. 8.6, the Adobe created NEF calibrations or LR 5.
Note 4). I have duplicated this issue in OS X 10.8.5, OS X 9.xx and OS X 10.10.1
Hopefully someone else has noticed this problem. Any shared information would be valuable. Thanks for the reply.

Happy New Year!
The Develop panel Tone settings in your Dec 31 screenshot show both the Highlights and Shadows controls set to negative values (-48 and -19). For most images (such as this model shot) they should be set to opposite values (-Highlights and +Shadows). To try and duplicate your issue I used negative values for both of these controls with a similar high contrast image. I noticed that the Shadows control becomes non-linear when both the Highlights and Shadows controls are set to negative values. As I moved the Shadows control from a positive value the Shadows clipping indicator comes ON as expected. Moving the Shadows control to a value caused the clipping indicator to turn OFF and moving it further negative caused it to turn back ON again.
The following screenshots demonstrate the issue with only Highlights & Shadows controls applied as shown.
The Highlights & Shadows controls set just to the threshold of extinguishing the clipping indicators.
Moving the Shadows control toward negative causes the Shadow clipping indicator to come ON (as expected), but at-13 it goes OFF again!
Moving the Shadows control further negative causes the Shadows clipping indicator to come back ON at -33.
This is probably normal behavior for the PV2012 Image Adaptive Tone controls as they were not designed to be used way (- - or ++ Highlights & Shadows). The PV2012 Tone controls all interact with each other, which is why it is suggested to adjust them from the Top down starting with Exposure. For most images using -Highlights and +Shadows of near equal value produces good results.
I still can't duplicate the change in clipping indicators after selecting another image, so it may be unique to certain camera models and/or lighting conditions.
SUGGESTION
Try one of the image files that exhibits this issue using the following PV2102 Tone control adjustment procedure:
Start with all of the Tone controls at their default 0 settings and adjust them from the top-down in the order shown below.
Set Exposure to correct midtone brightness ignoring the highlight and shadow areas for now. Setting Exposure slightly higher (+.25 to +.50 EV) than what looks correct for the midtones seems to work best with most images.
Leave Contrast at 0 for now. It’s usually better to adjust this after the first pass.
Adjust Highlights so that blown out areas are recovered and “fine tonal detail” is revealed.
Adjust Shadows to reveal fine detail in dark areas. For most normal images simply setting +Shadows = -Highlights (Example +50 and -50) works very well.
The Whites control sets the white clipping point, which you can see by holding down the ALT key as you move the slider. Adjust it to the point where you see clipping appear with the ALT key.
The Blacks control sets the black clipping point, which you can see by holding down the ALT key as you move the slider. Adjust it to the point where you see clipping appear with the ALT key.
Now go back and adjust the Contrast control to establish the best midtone contrast
If necessary “touch-up” the controls using the same top-down workflow.
If the issue persists I suggest Exporting an image to DNG file format with the settings that exhibit the issue and post it to Dropbox or other file download site.

N70 Idle / Power Saver Screen

Hi
My Firmware version is: v 2.0537.1.7 18-09-05 RM84
I'm on the Orange network (UK)
Is there anyway to adjust/configure the small Date/Time/Call & Message info on the Idle / Power Saver Screen
It's just too small for me to see - It was much bigger & clearer on my Nokia 6100
Any advice would be appreciated!
Regards,
Curly :-)

Do you mean the power saver screen as in when you havent touched the phone for a while then you get the SINGLE HORIZONTAL STRIP across your screen with the date time etc on it which occasionally alters position on the screen?? If this is the one you mean then no you cant make it any bigger nor does the network affect it either, its a nokia thing. If however you mean the Orange home screen date time etc with the icons down the left hand side, then this is network specific to Orange, i have it too, not ideal but you get used to it after a while! I've heard you can get it flashed and revert it to original Nokia settings but this invalidates your warranty and could create more problems with your phone!! I'm gonna put up with it, other than the Orange home screen i'm very happy with my N70. It'll do me another 6 months anyway till i next upgrade!!
Andy

Capture screen positions on click of a button in FPM toolbar

Hi Uve,
Currently in visual business if i right click on any map stack i will get the option for personalization and to set the screen position per user.
But my requirement is I have to set screen positions for multiple rail yards per user.So on click of a save button in fpm i require tje current screen positions so that i could save it and pass it during initialization of VB for that yard next time.
But what i notice is only when we right click on a map stack the exact screen position details are fired to backend,But when we right click on spot or links screen positions details like zoom factor, change of perception values etc are not passed.
Could you suggest a solution to get screen position from VB on an external FPM event.
Thanks
Siju

Hello Siju,
I am afraid this is a limitation of the current backend of Visual Business. Technically the camera value can be retrieved with every event fired by the control. But in your case there are two issues right now:
1. There is no event raised by the VB control when you press an FPM button
2. Even if there would be an event, the camera data needs to be requested with the event registration. This registration is fix for the backend API, and the data comes only with the right click on the map/scene.
However, there is a chance to get this done! If you check impl of method IF_VBI_CONTROL_ADAPTER~CHECK_DATA_CHANGED of class CL_VBI_CONTROL_ADAPTER you see how to trigger an arbitrary event of the control from the backend. You can derive your own control adapter from our base class and add an own method triggering event "7" instead of "GenDummy". This should lead to a context menu request including the current camera values.
Good luck,
Uwe

I just got photoshop cc 2014 on windows 8.1 64 bit, and it starts up on the white layout and and whenever I start a project it is in a window? Also whenever I try to change on of these it does not save. I am using the trial

just got photoshop cc 2014 on windows 8.1 64 bit, and it starts up on the white layout and and whenever I start a project it is in a window? Also whenever I try to change on of these it does not save. I am using the trial. Basically nothing saves and it was all screwed up when I first got it.

Do a screen screen capture and post it here so we can see what you stating about a white layout...

Acrobat 9.4.2 does not save/export all graphic formats

Dear all,
Obviously i had my glass of wine to early! See http://forums.adobe.com/thread/798630 for the whole story of my re-re-re-istallation of Acrobat.
The installation of 9.0 from the TCS2 DVD was OK
After update to 9.2 my tests displayed correct results for all desired tasks
After the update to 9.4.2 i obviously did not test thoroughly enough (hence the glass of whine).
Later it turned out that 9.4.2 does not save/export graphic formats:
pdf (all flavours), eps and ps are exported correctly
html (all flavours) export a html file and the image as jpg correctly
jpg, jp2 does not save anything, and no error message gives a hint
doc, rtf save issue error message "Save As failed to process this document. No file has been created"
png and tif do not save anything, and no error message gives a hint
xml table and xml export correctly
txt (both flavours) are exported correctly
Hence the only method i can get a picture is to export as HTML and through away the HTML... or: enlarge the picture as much as possible on the screen and take a screen shot.
What is missing in this installation?
During my re-re-re-installtions some Windows updates may have happened.
Any help available for this issue?
Klaus Daub e

The story goes on and hopefully Adobe has an answer/fix for this
There was an automatic update from 9.4.2 to 9.4.3, but the problem still existed.
So I decided to uninstall Acrobat and re-install it for the nth time: start with the installation of 9.0 from TCS2, reboot, update to 9.2, reboot, update to 9.4.3 and reboot again.
The result is very mixed (and this was alrady with the newly installed 9.0):
Save as RTF or DOC creates RTF and DOC files - although the contents is not that useful.
Save as PNG is OK
Save as JPG, JP2 or TIF works, but it turns out, that the files are all PNG (although with the various extensions)!
Creating a snapshot now works correctly. The clipboard receives a bitmap. However: although I have set the preferences for the snapshot to be of 96 dpi the bitmap gets the property 72 dpi!
Setting acrobat.exe to be Compatible to XP SP3 does not change a jota.
Keep in mind: on Windows XP things worked correctly for a long time. Switching to Window 7, x64 creates this strange problem.
I need to start with Acrobat from the TCS2 DVD, because otherwise I do not get the correct implementation for working with FrameMaker.
I'm very reluctant to buy Acrobat X, for me there are too many gimmics there (besides the costs).
Klaus Daube

New entry for a view in SM30 does not save

Hi all,
I created a new entry for a view in SM30.
Then when I tried to SAVE it, it does not SAVE and comes back to the same screen with the new entry. And it continues, until you CANCEL and come out.
Please let me know the reason for it.
Thanks and regards,
Anishur

copy the sap view to a zview make the modifications and generate in se11 the table maintenance generator.
why was it necessary to make the modification to the original SAP view ??
kind regards
arthur
Edited by: A. de Smidt on Apr 16, 2009 9:08 AM

Illustrator CS6 does not save PDFs to artboard

I have had this problem more than once. The first time it happened, I uninstalled AI and did a fresh install which fixed it for a short time. When I save a PDF out of AI, it does not save to the artboard constraints.
This is a screen shot of my AI document which has 2 pages.
When I save as PDF, this is what the file looks like:
(Pg 1)
(Pg 2)
After the original file has been saved (incorrectly) I can open it and save it again and it will be fine. Any ideas?

Here's my test of a similar file in AICS5
and here's the PDF
Got the same in AICS6 with the second artboard as a copy of the first as you've done.

Display As Text (Does Not Save State) Render Behaviour

I suppose this is directed more at the Oracle team members (as most of my posts are...) than anyone else, but others might find this interesting.
It would seem when an item has a type of "Display As Text (Does Not Save State)" the item's value is output as pure text which shows up as text nodes under the TD cell. However if there is anything in the "HTML Form Element Attribute" text field on the "Edit Page Item" page, the APEX rendering engine will output a span tag with those attributes around the value of the item. If the attribute is left null, no span tag is output.
Further more, the span tag does not have an ID attribute. One can also not set the "HTML Form Element" text box to contain the text 'id="" ' as APEX will throw an error stating that you can not specify the id attribute. So if someone would happen to want to access/change the value via JavaScript (say after an Ajax request of a hidden id change), it requires a hack (setting the TD cell's ID to the page item's name), DOM inspecting/sniffing, outputting an ugly disabled text element, altering the flows user's tables, or altering the render cache.
Is there any reason, why this span tag is not always output with the ID attribute set?

Hello Andrew,
You are, of course, correct. The APEX engine does not use the item ID for the "Display as Text (does not save state)". However, if you need to manipulate the item, using JS, you can use the "Display as Text (save state)", which does use the item ID. The on-screen effect is the same, but the JS use is easier.
Your original question though, remains open.
Regards,
Arie.

How to save your position in a JSP page on submit

I am building a web application based on JSP pages and servlets. One of the JSP pages is larger than the screen, so i have to scroll down. On the lower part of the page, i have a control that submits a form to a servlet that performs some logic and then returns to the same JSP page. When the JSP page is redisplayed, it is positioned at its top position again. I would like to save my positioning on the page and return to the exact same scroll position. How is this easiest done?

Just use an onclick or onsubmit event to get the current scroll position using JS and send it along the request to the server side and let it set the value in an onload event of the page which comes with the response.
I am not going to give you JS+DOM codes here. Just learn it and if necessary ask help at the appropriate forum. There are JS and DOM tutorials at w3schools.com and there are clientside development forums at webdeveloper.com and dynamicdrive.com.

Wht does my computer screen keeps going dark?

Why does my computer screen keep going dark?

Good. This means that, in your existing account, a setting is bad or .plist file is corrupt. As identifying the rascal may take time, my suggestion is to move data to the new account, must be with administrative privileges. As the contents of each account is unavailable to the other, there are two methods:
- if you have a backup on an external disk, as you should (if not, consider this seriously, do not count on good behavior of hard disks), make a last backup on the existing account, and restore in the other account; when ready, delete the old (buggy) account
- if not, save your settings unto a flash drive; this is a limited backup just to avoid putting back settings for Mail etc. I am satisfied with iBackup (grapefruit.ch), but there are other backup utilitites, Time Machine, for example; TM does not allow limited backup, it works if you have a large external disk. If backup disk is not available, move files to shared folder, which is visibile from both accounts, and from there to the new account.
May seem difficult, in fact it is not. You must just move data from one account to another. Now, take care to new apps you install or new functions you activate. When you notice something strange, that may be the cause of this behavior.

Does IDCS5.5 save screen position

Similar Messages

Maybe you are looking for