Does Illustrator have Selection Sets?

Anyone ever used 3ds Max? Know what a Selection Set is? Does Illustrator have them?
For those that don't know what I'm talking about, it's the ability to save a multi-state selection, by name (or any other identifier) for later easy re-selection.
Ideally, and this is going a bit far, applying each Selection Set to a Shortcut, like [SHIFT + COMMAND + 1,2,3,4 etc] can be really fast for bigger things, or iterating through ideas and variations.

You can't even begin to imagine!
I've been fighting, kicking, screaming, punching and mauling, tackling and generally brutalising my way through Adobe's UI clusterfuck.
Nice to see something implemented well. And the selection sets seem to be GREAT!

Similar Messages

The tag handler gridcolumn does not have a setter for the attribute autoExpand specified in the Tag Library Descriptor.

I recently moved from coldfusion 8 to coldfusion 9 but all the pages with cfgrid: is throwing the following error. Any suggestion would be of great help
coldfusion.jsp.JRunTagLibraryInfo$NoSuchAttributeException: The tag handler gridcolumn does not have a setter for the attribute autoExpand specified in the Tag Library Descriptor.
at coldfusion.jsp.JRunTagLibraryInfo.getPropertyType(JRunTagLibraryInfo.java:627)
at coldfusion.jsp.JRunTagLibraryInfo.buildTagInfo(JRunTagLibraryInfo.java:585)
at coldfusion.jsp.JRunTagLibraryInfo.getTag(JRunTagLibraryInfo.java:267)
at coldfusion.compiler.NeoTranslationContext.findTagName(NeoTranslationContext.java:346)
at coldfusion.compiler.NeoTranslationContext.isKnownTag(NeoTranslationContext.java:222)
at coldfusion.compiler.CFMLParserBase.isKnownTagName(CFMLParserBase.java:589)
at coldfusion.compiler.cfml40TokenManager.TokenLexicalActions(cfml40TokenManager.java:6704)
at coldfusion.compiler.cfml40TokenManager.getNextToken(cfml40TokenManager.java:6586)
at coldfusion.compiler.cfml40.getToken(cfml40.java:11879)
at coldfusion.compiler.CFMLParserBase.isTrivialAngleBracket(CFMLParserBase.java:707)
at coldfusion.compiler.cfml40.jj_3_1(cfml40.java:9392)
at coldfusion.compiler.cfml40.jj_3_2(cfml40.java:9460)
at coldfusion.compiler.cfml40.jj_3R_67(cfml40.java:9500)
at coldfusion.compiler.cfml40.jj_3_86(cfml40.java:8147)
at coldfusion.compiler.cfml40.jj_3R_92(cfml40.java:8584)
at coldfusion.compiler.cfml40.jj_3_85(cfml40.java:8641)
at coldfusion.compiler.cfml40.jj_2_85(cfml40.java:7619)
at coldfusion.compiler.cfml40.cfml(cfml40.java:4215)
at coldfusion.compiler.cfml40.cfif(cfml40.java:311)
at coldfusion.compiler.cfml40.cfml(cfml40.java:4224)
at coldfusion.compiler.cfml40.cfif(cfml40.java:311)
at coldfusion.compiler.cfml40.cfml(cfml40.java:4224)
at coldfusion.compiler.cfml40.cfelse(cfml40.java:442)
at coldfusion.compiler.cfml40.cfelseif(cfml40.java:374)
at coldfusion.compiler.cfml40.cfif(cfml40.java:314)
at coldfusion.compiler.cfml40.cfml(cfml40.java:4224)
at coldfusion.compiler.cfml40.start(cfml40.java:4664)
at coldfusion.compiler.NeoTranslator.parsePage(NeoTranslator.java:667)
at coldfusion.compiler.NeoTranslator.parsePage(NeoTranslator.java:648)
at coldfusion.compiler.NeoTranslator.parseAndTransform(NeoTranslator.java:401)
at coldfusion.compiler.NeoTranslator.translateJava(NeoTranslator.java:343)
at coldfusion.compiler.NeoTranslator.translateJava(NeoTranslator.java:144)
at coldfusion.runtime.TemplateClassLoader$TemplateCache$1.fetch(TemplateClassLoader.java:418 )
at coldfusion.util.LruCache.get(LruCache.java:180)
at coldfusion.runtime.TemplateClassLoader$TemplateCache.fetchSerial(TemplateClassLoader.java :362)
at coldfusion.util.AbstractCache.fetch(AbstractCache.java:58)
at coldfusion.util.SoftCache.get_statsOff(SoftCache.java:133)
at coldfusion.util.SoftCache.get(SoftCache.java:81)
at coldfusion.runtime.TemplateClassLoader.findClass(TemplateClassLoader.java:591)
at coldfusion.filter.PathFilter.invoke(PathFilter.java:80)
at coldfusion.filter.ExceptionFilter.invoke(ExceptionFilter.java:70)
at coldfusion.filter.ClientScopePersistenceFilter.invoke(ClientScopePersistenceFilter.java:2 8)
at coldfusion.filter.BrowserFilter.invoke(BrowserFilter.java:38)
at coldfusion.filter.NoCacheFilter.invoke(NoCacheFilter.java:46)
at coldfusion.filter.GlobalsFilter.invoke(GlobalsFilter.java:38)
at coldfusion.filter.DatasourceFilter.invoke(DatasourceFilter.java:22)
at coldfusion.filter.CachingFilter.invoke(CachingFilter.java:53)
at coldfusion.CfmServlet.service(CfmServlet.java:201)
at coldfusion.bootstrap.BootstrapServlet.service(BootstrapServlet.java:89)
at jrun.servlet.FilterChain.doFilter(FilterChain.java:86)
at coldfusion.monitor.event.MonitoringServletFilter.doFilter(MonitoringServletFilter.java:42 )
at coldfusion.bootstrap.BootstrapFilter.doFilter(BootstrapFilter.java:46)
at jrun.servlet.FilterChain.doFilter(FilterChain.java:94)
at jrun.servlet.FilterChain.service(FilterChain.java:101)
at jrun.servlet.ServletInvoker.invoke(ServletInvoker.java:106)
at jrun.servlet.JRunInvokerChain.invokeNext(JRunInvokerChain.java:42)
at jrun.servlet.JRunRequestDispatcher.invoke(JRunRequestDispatcher.java:286)
at jrun.servlet.ServletEngineService.dispatch(ServletEngineService.java:543)
at jrun.servlet.jrpp.JRunProxyService.invokeRunnable(JRunProxyService.java:203)
at jrunx.scheduler.ThreadPool$DownstreamMetrics.invokeRunnable(ThreadPool.java:320)
at jrunx.scheduler.ThreadPool$ThreadThrottle.invokeRunnable(ThreadPool.java:428)
at jrunx.scheduler.ThreadPool$UpstreamMetrics.invokeRunnable(ThreadPool.java:266)
at jrunx.scheduler.WorkerThread.run(WorkerThread.java:66)

Thanks Vishu,
We are running Coldfusion 9 and attach is the sample code and error message.:
The tag handler gridcolumn does not have a setter for the attribute autoExpand specified in the Tag Library Descriptor.
The CFML compiler was processing:
A cfgrid tag beginning on line 39, column 18.
The error occurred in E:/Websites/DreData/sobrietytesting/main/Sobrietytesting/Admin/view_users.cfm: line 54
52 :                     hrefkey="member_id"
53 :                     bind="cfc:tabledisplay.browseAccessAcountRequests(,,,)"
54 :                     >
55 :

HT201263 my iphone5 does not have passcode setting option. this is for auto-lock function

my iphone5 does not have passcode setting option. this is for auto-lock function

Hello SLLH
You can find the settings for the Passcode Lock in Settings > General > Passcode Lock. If you are looking for Auto-Lock, then go to Settings > General > Auto-Lock. If you are not seeing these options then you may need to do a reset settings on your iPhone, which is located at General > Settings >Reset > Reset All Settings.
iPhone User Guide
http://manuals.info.apple.com/en_US/iphone_user_guide.pdf
Thanks for using Apple Support Communities.
Regards,
-Norm G.

Does anyone have a set of .VIs for talking to a generic modem?

Hi and thanks for reading.
I don't want to have to know AT commands, just what I want to do. Such as go off hook, dial a number, wait for answer etc.

Stan,
Maybe the attached VI will help. This VI library contains utilities to talk via the serial port to a modem. Sending standard Hayes-compatible AT commands to the modem allow it to dial a number, send data, hang up, etc.
If you have the Internet Toolkit, it assumes you already have a valid TCP/IP connection. However, many web browsers such as Netscape and Internet Explorer have auto-dialing options that will start dial-up networking automatically when you launch your browser. The only trouble is that the auto-dial wizards can require the user to push buttons, but there is a Shareware program called DUNCE which will take care of the button pushes for you in the auto-dial wizards so the user does not have to intervene in the dial-up process.
You can la
unch the browser from LV and then have the browser configured for auto-dial and that should take care of the problem. I did not actually try this out myself, but in theory, it should work.
Zvezdana S.
National Instruments
Attachments:
Modem.llb ‏334 KB

Does Illustrator have an equivalent to Photoshop's rectangular marquee selection tool?

I am trying to select just a piece of an image in an Illustrator file to copy and re-scale, but I can't find the equivalent to Photoshop's rectangular marquee selection tool. Is there such a tool? Otherwise, I guess I can make the edits in photoshop and place in illustrator. Thanks!

Vector programmes ≇ Raster programmes
There are workarounds, but if you want to do yourself a favour, just do it in Photoshop or another Raster application.

Does Illustrator have dementia? (CS3, Windows XP)

I use the pen tool a lot for tracing, and most of the time I use a blue .25 point outline and no fill. Why can't AI remember this? For example, if I save the file I'm working on and close AI, when I open AI again, the stroke is set to 1 point, the outline color is set to black, and the fill is set to white. Why isn't it set to what I was using when I last saved and closed?
It is not only when you first open AI that the stroke, outline color, and fill are reset to some arbitrary default either. If you use another tool or function, and then go back to the pen tool, you can find things changed as well. When I select the pen tool, why can't it simply go back to what I was using the last time I used the pen?
I wonder how many hours I've wasted during the forty-eleven thousand times I've clicked on the stroke drop-down menu and selected .25 point, clicked on the stroke color drop-down menu and selected blue, and clicked on the fill color drop-down menu and selected [none].
The same thing happens with fonts. Sometimes it remembers what you were last using if you do something else and come back to the typing tool, but most of the time it figures 12 point Myriad Pro is a better choice.
I have an old version of Adobe Photoshop (version 7) and it remembers everything, even after you close it. I just opened it and it is showing the same shade of red in the "set foreground color" box that I was working with when I last used the program. When I click on the typing tool, it is showing the same 200 point homemade font I was last using. When I click on the paintbrush it is showing the same huge 965 px diameter round brush I was last using, etc.
So what is AI's problem? Is this the way it is supposed to behave? And if so, are there any settings I can change to make it remember certain things?

Jacob,
I never noticed the pattern, but that doesn't make the situation any better than if it was random. You still have to constantly change the layer color back to the one you want. What purpose does constantly changing the layer colors serve? Did it ever occur to Adobe that a good deal of people out there want the layer color to always be the same; and for the few times that a different layer color is desired, then it can easily be manually selected?
You say that you prefer red, which I assume means that you are constantly having to change the layer color back to red (unless you know of a way to make a new layer always default to red, in which case, I'd like to know what it is). I prefer yellow, so I'm always having to change the layer color to yellow.
I doubt we are the only two people who prefer a specific layer color. In fact, I would guess that it is common for people to prefer a specific layer color. I can see little use for an arbitrary pattern of imposed layer color changes, which is bound to cause a conflict eventually; e.g., when the new layer color matches or closely matches the color of your stroke (or the image you are tracing, if you are indeed, tracing an image), and then you can't see your anchor points or path indicator lines.

Does Firefox have a setting for retaining cookies similar to the 'Preserve Favorites website data' setting found in I.E. so you do not delete cookies from favorited websites when deleting your browsing history?

In I.E. when you want to delete your browsing history, the Internet Options tab allows you to retain the cookies for the websites that are listed in your 'Favorites'. With this preference enabled, you can delete your browsing history regularly without having to maintenance your cookies that you need. My bank requires that I register my computer for security reasons. The registration process places a cookie on PC. My browsing history is set to delete upon logout and I'm concerned that I will have to re-register my PC every time I log in or I will have to maintenance my browsing history every time I clear it. Does Firefox provide a feature so I can retain certain cookies that I want to keep?

If you use [[Clear Recent History]] or other means to clear (all) cookies then those specified cookies will be removed, even if there is an allow exception.
You can let all cookies expire if you close Firefox and make an Allow exception for the ones that you want to keep.
*Tools > Options > Privacy > Cookies: "Keep until": "I close Firefox"
*Tools > Options > Privacy > Cookies: "Exceptions"
Make sure that you do not use [[Clear Recent History]] to clear the "Cookies" and the "Site Preferences"
See also [[Cookies]] and [[Enabling and disabling cookies]]

My Z10 does not have a setting of "smart dialing"

hello, I use Blackberry Z10, mode number STL100-2, software verison 10.1.0.4181. however in the phone application,when I tap down the setting options, i could not find "smart dialing". because when the caller calls, even though it is saved on my contact book, the contact name cannot show up. I guess because I saved the number with a country code and when the caller calls the country code does not show up and thus no contact name. please tell me how to enable the "smart dialing" opition on my phone. I just could not see it on the phone setting. I am in China and my country code is 86. thanks.

The only thing I know otherwise is to backup, wipe the device, and load a fresh OS to the device.
If you need help with that, post back with the OS installed currently at Options > About
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Does Illustrator have a Gradient Feather tool like InDesign?

CS4...I know it has to be here somewhere, I know the gradient tool in In InDesign but cant find one in Illustrator. I see the normal feather but it seems to just feather the edges. I need it to start full on one end and fade out to the other end

Illustrator can feather transparency just as well as InDesign. Better, in fact. But the interface for doing so is convoluted and has long been one of the most asked questions on the forum. Look up Opacity Mask in the help files. Basically, you first create a gradient, gradient mesh, or a number of objects with different grayscale fills, which are then grouped. This object or group is placed above the object, image, or group to be masked and you Make Opacity Mask in the Transparency panel.

Does Administrator have to set cluster size during RAID 0+1,3 and 5 used according to Microsoft tech document?

Hi everyone,
I always thank you for providing helpful information in this forum.
As I got a plan to set hard drive for RAID 0+1,3 and 5. Therefore should I set cluster size under each RAID type according to the url which is provided by Microsoft Tech net. I mean I want to set the cluster size which is size by one time hard disk head
access.
The url is ....
https://support.microsoft.com/kb/140365
Thanks

Hi OlegSmirnovPetrov,
Additional,
on Win 2008 and later versions, disk partition alignment is enabled by default. On win 2k3 and earlier versions you need to enable ,
more information please refer the following KB:
1. Best practices for using dynamic disks on Windows Server 2003-based computers
http://support.microsoft.com/kb/816307
2. Disk Partition Alignment (Sector Alignment): Make the Case: Save Hundreds of Thousands of Dollars
http://blogs.msdn.com/b/jimmymay/archive/2009/05/08/disk-partition-alignment-
sector-alignment-make-the-case-with-this-template.aspx
3. General Hardware/OS/Network Guidelines for a SQL Box
4.http://blogs.msdn.com/b/cindygross/archive/2011/03/10/general-hardware-os-network-guidelines-for-a-sql-box.aspx (please refer Storage specifications)
5.Disk Partition Alignment Best Practices for SQL Server
http://msdn.microsoft.com/en-us/library/dd758814.aspx
I’m glad to be of help to you!
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Does Illustrator have a 3D feature?

I would like to use Illustrator as a low level CAD tool by drawing a top down flat object and then link it to a side View flat object to create and then link them. Is this possible. If not, do you have any suggestions on how to create a low level 3D drawing.
Thank you

A Cad 3D app would of course be better but the 3D effect you can do primitive work with
something on the lines like this and you can map artwork to the surfaces.

Does Illustrator Have "Golden Ratio", "Rule Of Thirds" And Other Crop Guides Like Photoshop Does?

I recently discovered that the crop tool in Photoshop allows you to cycle through several guides when cropping an image, such as the "Golden Ratio" spiral, or the "Rule Of Thirds" grid and a few more. I don't see anything like this in the crop tool for Illustrator. Does anyone know if this type of feature is buried away within Illustrator as well?

neohtom,
I am afraid it is buried too deep (in the heap of (im)possibilities) to surface soon.

Touch with os 1.1.5 does not have video setting out

New ipod touch 32gb and have bought video eyewear for it. The touch is supposed to have video settings - to allow selction of "TV out" - cant find it so maybe os 1.1.5 doesnt have it. Does anyone know anything about this.?

Trying these things would narrow it down:
try the other video port.
What video card do you have?
Try another display on that same port/different port.
You are sure the video card is 100% in tip top shape?
Try the card in a different machine if available.
Other than that... I don't know if you can test remotely for the video card... perhaps, try using a utility that WILL test the video card WHILE the computer is running... therefore testing it remotely should still test the card that's in it....? I think that TechTool Pro 4 ran a couple vid tests... maybe 5 does too? There might be other soft's out there that can. Check macupdate.com.

Does S5 have a setting where it opens hyperlinks automatically?

I used to have an S3, and I used an app to get sub jobs. It texted me jobs and I had to click on the link to accept the job. Once I upgraded to the S5, i was getting assigned to jobs without clicking on any links. I use the app Handcent SMS for texting, so if that's the cause I can delete or if it's a setting on the S5 itself please let me know what to do! Thanks!

I'm sorry you're having an issue with your hyperlinks Johanna0828. I do recommend temporarily removing any 3rd party messaging apps that may be causing a functionality issue. Are you having an issue with hyperlinks opening automatically when you access your email or when you access the internet browser.
KinquanaH_VZW
follow us on Twitter @vzwsupport

RV042 Firmware Version 1 does not have VLan setting enable.

Hi
I am using the RV042 whereby I had seen the firmware PDF whereby ver 3. and ver 4 firmware comes with Vlan options.
But for RV042 version 1, I do not see the Vlan under the system management sections.
Is there any way to go around it :P

If you have an older version, you can upgrade the firmware to the highest for that hardware. I would expect that vlan was in the highest v1 firmware for the rv042 as it was for the rv016 v1.

Does Illustrator have Selection Sets?

Similar Messages

Maybe you are looking for