Does iMovie 08 work with two external devices?

Does iMovie 08 work with two external devices without causing latency. I need to capture the video through an external USB webcam and the audio through a Digital Recording box through firewire.

YES and there are multiple postings here with complete information
Also visit:
http://www.dvinfo.net/conf/forumdisplay.php?f=156
A Users Group with answers to al your questions.

Similar Messages

Does imovie work with Mac OS X 10.6.8 (10K549)

Does iMovie work with Mac OS X 10.6.8

Me too! I have Macbook Pro 4, 1 with Mac OS X10.6.8 and I have IMOVIE 09 - 806 (version 821)
I can't seem to import any films into it - they don't show up as events.
Information online about suitability of 09 to Mac OS X 10.6.8 is confusing
Any advice?

Does iMovie work with AVCHD format on mac book pro 10.8.2

Does iMovie work with AVCHD on mac book pro 10.8.2? Getting quit unexpectedly error, after 25 minutes of using.

Check to make sure that your TV is set to the HDMI input that you're using.

Datasocket does not work with two network cards

If I have two ethernet card in a PC. The Datasocket server does not work if the second card is enabled. It keeps displaying resolving IP Address. I am wondering if there is a solution for this problem.
Thanks

Thanks for you reply. One card has a static address(10.20.35.1), which is used for Data socket, and the other card uses a dynamic IP address. The card with dynamic address is only used for connecting the PC to the company’s network.
The second card, when turned on causes the Datasocket server problem. In the Datasocket Server manager I have only two IP addresses under Permissions Groups. (10.20.35.1 and 10.20.35.11. 10.20.35.11 is the IP address of the remote PC with labview application. The Datasocket is used to transfer data between the two PC’s)
I am wondering if my set up for hosts in Datasocket Server manager is not correct.

PCI USB Card Does NOT Work With Mass Storage Devices

I have a StarTech PCI card with 6 USB 2.0 ports that I inserted in my 500 MHz (overclocked) B&W Power Mac G3. It works great for any USB device EXCEPT for any hard drive or DVD/CD-RW drive. I checked the system.log file for errors. Nothing shows up in System Profiler or Disk Utility, obviously. Here's what it consistently says:
Dec 16 23:33:28 Geoff-Myers-Power-Mac-G3 kernel[0]: USBF: 674.997 [0xf9c000] The IOUSBFamily is having trouble enumerating a USB device that has been plugged in. It will keep retrying. (Port 6 of hub @ location: 0x62000000)
Dec 16 23:33:33 Geoff-Myers-Power-Mac-G3 kernel[0]: USBF: 679.977 [0xf9c000] The IOUSBFamily was not able to enumerate a device.
I'm running the latest version of Mac OS X Tiger 10.4.3. What is wrong? StarTech doesn't have a driver, but nothing should be necessary. Is there a 3rd party USB Mass Storage Device driver that might work better than the Apple generic driver? PLEASE HELP ME! I cannot live with USB 1.1.

Some users have reported problems with certain brand cards and their controller chipsets, so trying a different card may resolve the problem. Keyspan and Macally are often mentioned as being more "Mac-friendly" than some other lessser-known brands or generic cards. Does the card have a mini-power port to supplement the power requirements? With USB 2.0, each port is on a separate bus, so a card with six ports should have one. To minimize the overall draw on the available power, I prefer to install USB cards with as few ports as are needed.

Usb 3 does not work with my audio device

hi everybody
I've the same issue about my retina display and Usb 3,i have several audio device as AllenHeath Xone db2 and Yamaha AUDIOgram3.
The Audio is dropping often,i 've done every upgrade about Mac Os and firmware on my AH mixer,i,ve tried even to put an Usb2 Hub between my Mac and
AH,but nothing,the issue are goin on.
Please i 'd like to know why Apple does not solve this issue....
I must use my old mac when i play ad dj or performes ,actually with us2 my AllenHeat sounds great and i'm sure that the issue is about Mac's usb
Thanks Marco

Hey Marco,
This is a end-user-to-end-user support forum for the most part, I suggest you contact Apple via http://getsupport.apple.com or even http://www.apple.com/feedback to alert about your issue.
Good luck.

Working With Two External Files With T-SQL Commands

Hi friends,
In a VSTO Excel AddIn of mine I have come across a need to use T-SQL commands before bringing the dataset on the activesheet, derived from two tables in the shape of external CSV files. However,
since using SQL Express in this regard requires connection to a server. With Visual Studio as well as SSMS installed on my laptop I'm able to use the said facility but I am unable to distribute such an addin to other team members not having any of the studios
installed nor access to any server.
Is there any way to use the similar features on the users' side?
In other words, how to develop a macro, for example, in which I could consider two CSV files as two different tables as in a database, and carryout some T-SQL functions/commands on the same like:
UNION of first three columns from both the tables;
Creating a temporary table with the DISTINCT sets of the said three columns; and
Then carryout LEFT JOINS between the new table and the earlier two tables;
to derive a simple comparative dataset?
Looking forward for you experts' valuable advices in this regard.
Thanx in advance.
Thanx in advance, Best Regards, Faraz A Qureshi

Hi FARAZ,
As with Excel files, you can also use Odbc driver to connect to CSV files. As long as the user's machine installs the ODBC driver, you can OdbcConnection to connect to the CSV files.
The sample code to manimulate CSV files with ODBC driver(C#):
string connectionString = @"Driver={Microsoft Text Driver (*.txt; *.csv)}; Dbq=C:\; Extensions=asc,csv,tab,txt;";
using (OdbcConnection conn = new OdbcConnection(connectionString))
conn.Open();
string sql = "SELECT u.UserName,u.Age,c.Phone,c.Address FROM user.csv u left join contact.csv c on u.Id=c.UserId";
using (OdbcCommand cmd = new OdbcCommand(sql, conn))
But if you want to publish the Add-in to the user's machine, you still need to install the .Net Framework and the VSTO runtime to support the Add-in.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Yosemite does not work with Kodak 5500 device driver

Upgrading to Yosemite disabled my printing to my Kodak 5500 AIO device. Attempting to print initiated the device, but no pages would print and an error would appear on the printer display. Restoring to OS X 10.9.5 solved the problem. I'm glad I didn't pay anything for Yosemite. It does not live up to the reputation that I have experienced with Apple products.

Your problem is due to the fact that Kodak has not updated its printing software for Yosemite.
Kodak has posted an unsupported hack that has been reported to enable printing to a Kodak printer not supported in OS X 10.10 ("Yosemite"). Perhaps it would have the same effect with some other kinds of printers that aren't supported in Yosemite. I have no information about that, one way or the other.
I have not tested the hack myself and I don't know all the possible effects. As far as I know it will not break the compatibility of printing software that is already compatible with Yosemite. It may degrade the security of the web administration interface of CUPS. That interface is not enabled by default, and will not be enabled by the procedure described here. Even if it were enabled, I know of no way it could be exploited, with or without the modification. Nevertheless, if you have enabled the web administration interface, you should disable it if you decide to follow these instructions. If you don't know what the web administration interface is, you haven't enabled it.
If you don't like the results of the procedure, reset the printing system.

FaceTime won't work with two Apple devices & One ID

Before I got my iPhone 5c I used to be able to use FaceTime on my MacBook Pro. When I got my iPhone 5c I could no longer use FaceTime on my MBPro. Now FaceTime only works on my iPhone.
When I try to sign-in to FaceTime on my MBPro I get the following:
Your Apple ID "[email protected]" can't be used to set up FaceTime at this time.
I contacted Apple FaceTime Support. They wanted $30 to address my problem.
Has anyone else had this problem?

I am experiencing the same issue logging into my MBPro. I attempted to use FaceTime however when I opened the app it required me to enter in my log in information, which I have never had to do since I first began using the app years ago. Well when I entered in my info clicked NEXT I received this error message: "The server encountered an error processing registration. Please try again later."
Don't get it. Feeling perhaps I need to update my operating system to Yosemite? Will this fix it?

One USB port does not work with external Disk or USB key

Hello,
Back to my iMAC there is 3 USB port. The second one - in the middle - does not work pluging an external Disk, an USB key or an iPOD nano. However it works well connecting a Wacom tablet.
Is there an explanation to this behaviour ?
More the keyboard is plugded on USB port 1 and the mouse on the keyboard. Time to time - especially at reboot - I have to unplugged the mouse and plugged again it in order it works.
In advance thank you for your answers
Regards

Since it does not work for three different devices, I will assume it is not something simple like a faulty USB cable. Since it does work for one device, I will also assume that the port is (at least partially) working.
As a test to narrow down the cause, I would try restarting from your Mac OS X installation disc (insert disc and restart with the C key held down).
At the first Installer screen (after language selection), go up the menu bar. Under Utilities, select to run Disk Utility. Now, connect the USB drive into that center port. Does it appear in the Disk Utility sidebar?
Please post back the result...

External USB HD does not work with HAL:

External USB HD does not work with HAL:
From the last 10 days the HAL auto-mount with ntfs-3g file system of my external hard drive does not woks.
But the manual mount procedure with the command mount -t ntfs-3g /dev/sdb* /mnt/XYZ works.
I've followed the instructions in the wiki: http://wiki.archlinux.org/index.php/HAL and the system has worked up to the last kernel or HAL update.
My fat32 usb-stick works without any problem.
If I try to open the device with KDE it appears an error popup wit this message:
TODO: have to rethink extra options
Error: kio_media_mount_helper
The log from the kernel.log is
Nov 6 22:03:16 myhost usb 5-1: new high speed USB device using ehci_hcd and address 4
Nov 6 22:03:16 myhost usb 5-1: configuration #1 chosen from 1 choice
Nov 6 22:03:17 myhost Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
Nov 6 22:03:17 myhost ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Nov 6 22:03:17 myhost Initializing USB Mass Storage driver...
Nov 6 22:03:17 myhost scsi6 : SCSI emulation for USB Mass Storage devices
Nov 6 22:03:17 myhost usb-storage: device found at 4
Nov 6 22:03:17 myhost usb-storage: waiting for device to settle before scanning
Nov 6 22:03:17 myhost usbcore: registered new interface driver usb-storage
Nov 6 22:03:17 myhost USB Mass Storage support registered.
Nov 6 22:03:22 myhost scsi 6:0:0:0: Direct-Access WDC WD32 00JB-00KFA0 0811 PQ: 0 ANSI: 0
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] 625142448 512-byte hardware sectors (320073 MB)
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] Assuming drive cache: write through
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] 625142448 512-byte hardware sectors (320073 MB)
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] Assuming drive cache: write through
Nov 6 22:03:22 myhost sdb: sdb1
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] Attached SCSI disk
Nov 6 22:03:22 myhost sd 6:0:0:0: Attached scsi generic sg2 type 0
Nov 6 22:03:22 myhost usb-storage: device scan complete
and the error.log is
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] Assuming drive cache: write through
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] Assuming drive cache: write through
Do you have some idea ....
Bye.

I have done the following:
Downloaded the patched hal version.
used makepkg in /abs/local/trunk/ to create a pkg for pacman
used sudo pacman -U pkgname to install it.
used sudo nano /etc/hal/fdi/policy/preferences.fdi to create the fdi file with the following content:
saved the file and removed my ntfs entryes from fstab and rebooted. and still there is no automount off ntfs partitions.
have i done something wrong?
br fjodork
WARNING: what follows is a guide of what did work for me, I'm still in an early stage of learning linux, so please correct me if anything of what follows is wrong/dangerous/stupid. As I said, this worked for me, it's not pretty, since I was learning each step on the fly and I'm sure there are better ways to do this.
So fjodork, you seem to have done the the necessary steps, though i couldn't get it to work until i first removed hal without dependencies
pacman -Rd hal
it will give you some warning about the dependencies, ignore it since we are reinstalling hal in a few steps.
First i tried to follow Raymano's link, obviously it showed me nothing in the browser so I thought it might be a broken link.
So I downloaded the source tarball from here http://hal.freedesktop.org/releases/hal-0.5.10.tar.gz
unpacked it changed the /tools/hal-storage-mount.c as per Milfadoodle's instructions.
at first I tried to compile directly from source, the process would finish without a glitch though after reboot nothing changed, as if hal weren't
installed, i guess there were issues with paths. anyway read on
Then repacked the source in tarball, copied it to /var/abs/extra/system/hal and modified the PKGBUILD as follows
makedepends=('pkgconfig' 'gperf')
options=('!libtool')
install=hal.install
source=(${pkgname}-${pkgver}.tar.gz #removed url so makepkg looks in the current directory for the tarball
hal
hal-policy.patch
cryptsetup_location.patch
hal-0.5.9-hide-diagnostic.patch
ntfs3g-valid-options.patch)
md5sums=('6641c30a27c00485c6accac5110ff911' # replace with md5sum of your package's sourceball (run md5sum filename)
'882f67668cb14a0a9e4a27ef22278027'
'5ba8b610aa9763a5f42b9f7cbd7a86ad'
then makepkg (i had to add --asroot, don't ask why
and finally pacman -U hal-0.5.10-1-i686.pkg
another reboot and everything worked without a glitch!:D (yeah i know i still haven't got rid of the reboot mentality )
I have also put the policy files as per the wiki instructions.
PS: I know this is a dirty way to getting things done but as i said, I'm just starting
If anyone could comment/correct/explain this post I'd be more than happy, the automount issue was bothering me for about a month now (you'll say why do I need ntfs in the first place? well, I only recently switched for Linux as my primary OS, these are some relics of the M$ era

External Hard Drive does not work with Lion

Hi
My External Hard Drive does not work with Lion this message appears:
NTFS-3G could not mount /dev/disk1s1
at /Volumes/My Passport because the following problem occurred:
/Library/Filesystems/fusefs.fs/Support/fusefs.kext failed to load - (libkern/kext) link error; check the system/kernel logs for errors or try kextutil(8).
the MacFUSE file system is not available (71)
can anyone help?

Hi,
See this Discussion:
https://discussions.apple.com/thread/3191198?start=0&tstart=0
Cheers,

Is there an external camera for ipad1 available and does it work with 4.3.5?

Is there an external camera for ipad1 available and does it work with 4.3.5? Really hoping to get facetime going on my ipad

AFAIK, no one makes an add on camera for the iPad1. If selling your iPad1 and buying an iPad2 is out, then you can use Skype on the iPad1. Although the other person won't see you, the iPad1 will receive Skype video so you can see them, if they enable their video.

Why does final cut x not recognize the sharp PN- K321 monitor ( European version ) as output video monitor and premiere it? Working with two cinema display and PN- K321 and I can not preview the output video at 4K for DisplayPort, whereas with premie

Why does final cut x not recognize the sharp PN- K321 monitor ( European version ) as output video monitor, and premiere yes?
Working with two cinema display and PN- K321 and I can not preview the output video at 4K by DisplayPort, whereas with premiere and after effects I have no problems

Look, you can build an HD DVD with an SD movie, just as you can build an SD DVD with an HD movie. This is not a bug, it is most likely user error. Apple will not be addressing it.
Just start over, and ensure you are building an SD DVD by bringing up the inspector for the disc (click on the background in the Graphical tab).
Make sure SD DVD is selected:
(If you do the same thing on your ill fated project, you'll see that HD DVD is selected)
Build your DVD and you'll be fine.
Patrick
P.S. You will need to google HD DVD and Blu-Ray if you want to understand the difference between the formats. The reason that DVDSP included HD DVD was that its format was similar to SD DVD's. Blu-Ray is something else entirely.

Does AirPrint work with all kinds of printers with modern usb capability? Does it also work with android based devices?

Just as the question says

Does AirPrint work with all kinds of printers with moden usb capability.
AirPrint works if you have an AirPrint compatible printer. See this Apple support document for details on compatible models.
http://support.apple.com/kb/HT4356
If the printer is not AirPrint compatible, it still might be possible to enable printing by installing an App like Print Central on the iPad, iPhone, or iPod.
PrintCentral Pro for iPhone/iPod Touch - iTunes - Apple
Does it also work with android based devices?
I would be surprised if it did, but best to ask that question on an Android support forum.

Does iMovie 08 work with two external devices?

Similar Messages

Maybe you are looking for