Does importing MAX config settings file replace or append the existing MAX entries?

Hi,
Does importing a .nce file into max replace the existing config of max with the imported config, or does importing add the new MAX items to the existing MAX items (so that both the "old" and "newly imported" config can be used.
Solved!
Go to Solution.

Either or both! (sometimes neither)
in the import wizard you can select which items to import and what to do about items that conflict or exist with different information. (NI really did a nice job - for NI devices!) for some things (like Pickering VXI devices) you can't import the MAX settings.
Jeff

Similar Messages

Source distribution, source file settings, files not goint to the desired destination directory

I am tring to set up a number of source distributions for a handful of unique but related programs in LabView 8.0.1. All of the programs have their own unique tasks to comple but they all use a set of basic sub vi's that I wrote. Basically I could have put all those sub vi's into a .lib file but chose not to for the sake of simplicity. Also each program calls a number of vi's from the set of LabView libraries. To summarize what I want to do with my distribution structure; I created four destination directories: First the top level destination directory, the top level vi of each program will live there. Second I made the Support Directory which contains all of the unique sub vi's that are required by the top level vi. Third I mad a Common Support directory which will contain all of the basic sub vi's that all of my programs use. And fourth I made a Library Support directory which will contain all LabView library vi's. The top level destination directory is superior to the other three directories and the other three directories are at a pier level.
My problem is when I assign the locations for the vi's in the Source File Setting category. The destination directory for all of my Dependencies vi's (basically all of the LabView library vi's) is not obeyed. I want all of those vi's to appear in my Library Support directory, but when I generate a preview they don't appear in the assigned directory. All other destination directories are obeyed and appear correctly. I do not know what I am doing incorrectly. I have attached a few screen shots to help explain my structure and where it is not working.
Any help is appreciated,
Eric
Attachments:
Preview.JPG ‏82 KB
Distribution Settings.JPG ‏61 KB
Source File Settings.JPG ‏58 KB

Eric:
I just created a source distribution with specific folders and things seemed to work just fine for me. Please take a look at the attached document and let me know if you are experiencing the same thing, it is possible that I am missing your point.
Thanks,
Rudi N.
Attachments:
SourceDist.doc ‏160 KB

An index of my desktop files appears in firefox. why is it there? does this mean my personal files are accessible from the internet? how can i make sure this goes away and stops?

i am seeing and index of my personal files on firefox. what is this? why is it there? how can i make it go away? does this mean my desktop files are on the internet? can someone explain clearly and simply (i am not tech saavy at all) thank you

This issue can be caused by an old bitmap version of the Helvetica or Geneva font or (bitmap) fonts that Firefox can't display in that size.
Firefox can't display some old bitmap fonts in a larger size and displays gibberish instead.
You can test that by zooming out (View > Zoom > Zoom Out, Ctrl -) to make the text smaller.
Uninstall (remove) all variants of that not working font to make Firefox use another font or see if you can find a True type version that doesn't show the problem.
There have also been fonts with a Chinese name reported that identify themselves as Helvetica, so check that as well.
Use this test to see if the Helvetica font is causing it (Copy & Paste the code in the location bar and press Enter):
<pre><nowiki>data:text/html,
Helvetica abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ 
Helvetica Neue abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ
</nowiki></pre>
You should reset the network.http prefs that show user set on the about:config page. 
Not all websites support http pipelining and if they do not then you can have issues with images or other problems.
See also http://kb.mozillazine.org/Images_or_animations_do_not_load#First_steps

Import data from excel file - best practice in the CQ?

Hi,
I have question related to importing data from excel file and creates from those data a table in the CQ page. Is inside CQ some OOTB component which provides this kind of functionalities? Maybe somebody implement this kind of functionality or there is best practice to do this kind of functionalities?
Thanks in advance for any answer,
Regards
kasq

You can check a working example package [1] (use your Adobe ID to log in)
After installing it, go to [2] for immediate example.
Unfortunately it only supports the old OLE-2 Excel format (.xls and not .xlsx)
[1] - http://dev.day.com/content/packageshare/packages/public/day/cq540/demo/xlstable.html
[2] - http://localhost:4502/cf#/content/geometrixx/en/company/news/pressreleases/my_personal_bes ts.html

I recently had my hard drive replaced and now iTunes won't allow me sync my iPhone without deleting all the media contents and replacing it with the existing library. Is there another way without erasing everything?

I have already backed up my iPhone, yet it still will not allow me to move the contents of my phone onto my computer. Rather, it wants to delete everything off of my phone and replace it with the contents on my iTunes. Is there a way I can integrate both my iTunes and iPhone? There used to be autofill on iTunes, but I can no longer find it.

Hello there, DollyVong.
The following Knowledge Base article has great information and steps to follow on getting purchased content from your iOS device to your computer:
iTunes Store: Transferring purchases from your iOS device or iPod to a computer
http://support.apple.com/kb/HT1848
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro D.

Aperture wants 825 MB more diskspace, but my HD has 630 GB free space. A perture doesn't let me import my latest raw files. What's the problem?

Hi, I have Aperture 3.2.2 installed on a iMac with OS 10.6.8
While I plug in my Nikon to import my raw files from today, Aperture tells that I need 825 MB more space on the disk.
But actually I have more than 600 GB free space on my HD. So what is the problem? What should I do?
Any ideas?
Cheers
Andreas

Not sure.
Try these, though:
. Empty Aperture Trash
. Close Aperture
. Empty system trash
. Reboot
. Try the import again.
What does Finder tell you about the free space on the drive volume in question after you've emptied the system trash?
Are all of your Image's Masters managed?
Are you sure you have Aperture set to import to the drive you want?

Importing and organizing photo files lightroom 5 for the first time. Clean up hard drive photo files

I have a trial version of lightroom 5 and would like once and forall to bring some order to both my hard drives and lightroom 5 collection. Some photos in lightroom 5 seem to have lost their path. some are in Window 7 folders and others are in Elements 9. I have made back up copies of some folders and would like to have a more systematic approach to back them up from now on. I have a NAS (network access storage) device and an extra hard drive I thought it would be best to use my laptop as the primary working memory for my photo files as it would be faster than working with the NAS or external, and then back everything up to the NAS and external. I see the main challenge as consolidating all of the files and whereever possible preserving the ratings I have given photos; I would like to eliminate duplicats. on both the hard drive and in lightroom. i have looked at one of the initial training vidios on the 'library' section of adobe help and the presenter talked of two methods of importing photos,. the first and the one I think I will use going forward is to open lightroom and import from the sd card directly as opposed to having Windows 7 import and then having lightroom find them. If someone kows of a comprehensive list of instructions to follow to clean up my hard drives that would be extremly helpful? Peter

I doubt there is a list of instructions to clean up a hard drive, because every starting sitaution is different, and your "clean" is probably a lot different than my "clean".
But let's clear up a few things first. Based on your writing, it seems like you think you have photos stored in PSE and photos stored in LR. This is not correct. Neither of these programs store your photos. All of your photos are on your hard disk, in folders, somewhere.
With regards to missing photos in Lightroom, when you move or rename photos and folders OUTSIDE of Lightroom, Lightroom no longer knows where they are, and reports them as missing. To fix it, see: http://www.computer-darkroom.com/lr2_find_folder/find-folder.htm Related to this, you don't want to "clean up" things in Windows and also "clean things" up in Lightroom. Instead, once you import photos into Lightroom, you should do all photo management in Lightroom, not Windows, otherwise you will just be creating more missing files.
With regards to duplicates, Lightroom has some tools to detect duplicates. It will try to prevent duplicates on import, and if you do manage to import duplicates, you can use the "AutoStack by Capture Time" to try to find additional duplicates. But if those don't work, then you're pretty much on your own.
With regards to putting photos on your laptop to work on them rather than your external HD, I think you will find that this provides a tiny fraction of a second improvement in speed which you may not even notice, which will be offset by the time you spend moving photos to somewhere else when you are done. So, just put the photos in their final destination folder on your external HD or NAS, and don't bother moving them to the internal HD.
Which brings up another point. Once you have accomplished this "clean up", your workflow should be to put the photos in one place, and then don't move them! (Exception: running out of space on disk, or moving to a new disk/computer) Make your life as simple as possible.
One last point: strongly consider using keywords and other metadata to achieve organization, instead of moving photos/folders from here to there to achieve organization. These tools in Lightroom give you ability to organize in much more powerful and flexible organization than anything you can do by moving photos/folders from here to there. (Side note: if you want all photos in some sort of centralized location because it meets your storage needs, then do that because it meets your storage needs. Within that collection of photos in a centralized location, use keywords and other metadata to achieve organization and for searching)

Automatic track assignments importing type 1 MIDI file

Hello - I am trying to understand how Logic decides to assign tracks when importing a standard MIDI file. According to the manual:
"As a default behavior, Logic Pro will automatically create software instrument tracks for each MIDI track, and assign an appropriate GarageBand instrument to each, when you open a MIDI file".
The files I want to import consist of a few tracks, with track names describing their role, such as "bass", "pad", "lead", "drums", etc. Each track contains ONLY note-on/note-off events, and all of the notes on each track are assigned to a particular channel. (No program-changes, tempo, or any other kind of controller events, SYSEX, or meta data).
When I import the file, most tracks are automatically assigned to a software instrument, which is fine because I can then set the track to a particular channel strip performance by sending the appropriate program number to each track.
THE PROBLEM: it usually happens that one of the imported MIDI tracks will get assigned to 'No Output', instead of to some software instrument. The tracks with names "bass", "lead", "pad", and "drums" (on channels 1, 2, 4, and 5 respectively) always seem to get consistently assigned to a software instrument. But the channel 3 tracks (I've tried naming them "piano", "keys", "synth", etc) usually, though not always, get assigned to "No Output".
The reason this is a problem is that I am trying to remotely control Logic (via Applescript) from a web application, where Logic is used to automatically render MIDI data into audio. So I can't manually reassign that track, and unfortunately there seems to be no way to reassign a track via key commands, or I could accomplish that via Applescript as well.
Does anyone have any idea what criteria Logic uses when automatically assigning tracks to "suitable" software instruments, so that I can avoid having tracks end up assigned to "No Output"? Hope this question makes sense, and thanks for any guidance.

midi file 0 is one track per midi channel, midi file 1 is separate tracks. for example, if a drum track on one midi channel has each note separated to its own track midi file 0 merges them and midi file 1 keeps them separated

Auto update via Jabber-Config.xml file

All,
I wan't to force J4W updates via the jabber-config.xml file, but that's the only thing I want to do. Can the jabber-config.xml file be populated only with the auto update option and nothing else so the user still has control over their own client's options? Or, do the rest of the options need to be defined within the xml file as well? The install guide seems to indicate that one can pick and choose the J4W options they want to globally set within the jabber-config.xml file, but it's not entirely clear.
Thanks,
Joe.

Hi Joe,
yes, you are right. You only have to define settings in the jabber-config.xml file that are not default. Everything else stays default.
Regards
Andre

Adf-config.xml file gets corrupted

Hello,
I have observed in many instances that adf-config.xml file get corrupted in the sense it looses (wipes out) mds conenction string and as a result the projects won't compile or you will not be able to fecth anything from MDS like wsdls ect. Making this file as read only or backing it up seems to be the work around. I have seen this in 11.1.1.3.0 version.
But can you please suggest why this happens and any permanent solution to fix this?
Thanks
SathyaP

In your adf-config.xml the password property is not properly closed and your property name is incorrect.
Replace following:
<property name="password" value="p$ssword1"*with this in your adf-config.xml
<property name="jdbc-password" value="p$ssword1"/>

Where is the Error-Handler config DB file?

Where is the Error-Handler config DB file?

All the Config DB files are in the config directory under the
postoffice directory. Each config file has the same name as the
Module it's the config for (e.g. Error-Handler contains the configs
for the Error-Handler.)

Look in the database alert file - in the "bdump" directory
Look in the trace files in the "udump" directory
If still no wiser:
ALTER system SET event = '31098 trace name context forever, level 2' scope=spfile
Try again and look for the trace files starting with "s..." in the "udump" directory.

[svn] 3025: Add libs/player/ 10 directory to the library path in the team apps flex-config.xml file.

Revision: 3025
Author: [email protected]
Date: 2008-08-28 11:24:42 -0700 (Thu, 28 Aug 2008)
Log Message:
Add libs/player/10 directory to the library path in the team apps flex-config.xml file. This is to matche what's in the flex-config.xml file that comes with the Flex SDK.
Add libs/player directory to the library path of the flex-config.xml file that is shared by the qa-manaul and qa-regress webapps. This is to match what's in the flex-config.xml file that comes with the sdk.
Change the call to mxmlc in the compile-swf target in the flexunit build script to set the target player version to 10.0.0.
Remove web services and http service tests that were removed by Bill from qa feature.properties files otherwise the automated test frameworks will try to run these tests and blow up.
Modified Paths:
blazeds/trunk/apps/team/WEB-INF/flex/flex-config.xml
blazeds/trunk/qa/apps/qa-regress/testsuites/flexunit/build.xml
blazeds/trunk/qa/features/full.properties
blazeds/trunk/qa/features/httpService.properties
blazeds/trunk/qa/resources/config/flex-config.xml
Removed Paths:
blazeds/trunk/qa/features/nist.properties
blazeds/trunk/qa/features/webService.properties

Revision: 3025
Author: [email protected]
Date: 2008-08-28 11:24:42 -0700 (Thu, 28 Aug 2008)
Log Message:
Add libs/player/10 directory to the library path in the team apps flex-config.xml file. This is to matche what's in the flex-config.xml file that comes with the Flex SDK.
Add libs/player directory to the library path of the flex-config.xml file that is shared by the qa-manaul and qa-regress webapps. This is to match what's in the flex-config.xml file that comes with the sdk.
Change the call to mxmlc in the compile-swf target in the flexunit build script to set the target player version to 10.0.0.
Remove web services and http service tests that were removed by Bill from qa feature.properties files otherwise the automated test frameworks will try to run these tests and blow up.
Modified Paths:
blazeds/trunk/apps/team/WEB-INF/flex/flex-config.xml
blazeds/trunk/qa/apps/qa-regress/testsuites/flexunit/build.xml
blazeds/trunk/qa/features/full.properties
blazeds/trunk/qa/features/httpService.properties
blazeds/trunk/qa/resources/config/flex-config.xml
Removed Paths:
blazeds/trunk/qa/features/nist.properties
blazeds/trunk/qa/features/webService.properties

Is it possible to load or import 1 journal from file?

Hi to all,
We are searching how to load or import from and excel file some journals into the journal table of SAP BPC. As we have seen it is possible to load all the table but not only to add one journal to the table.
Anybody knows if it is possible to load 1 journal from file into SAP BPC and add it to the table of journals?
in a standard way or using logic??
Thanks a lot!!!!

I don't think that there is a method available to ONLY add 1 Journal record, since the sequence of Journals is an Autogenerated key. The best way would be to simply add the Journal, so that the appropriate values are logged and tracked accordingly. The table may be loaded, since the "whole" table has a defined key for the sequence of Journal entered transactions.
Hope this helps.

Creating jsf faces-config.xml file

Hello.
I'm a newbee on Sun Java Studio Enterprice and have just converted from Borland Jbuilder.
In borland, if I create a new "webmodule" and include the jfs library, Borland automaticaly creates the faces-config.xml file for me. The IDE then helps me keep this file up to date.
After creating a new project in Sun Java Studio Enterprice I have gone into propereties and included the jsf-1_1_01.zip file (I googled jsf library and found this file. If I include this file I get access to the <h: -taglib etc so it seems to be working). But the IDE doesn't create the faces-config.xml file.
Do I need to create this manually or what do I do wrong?

As an alternative to Creator (which mostly implies WYSIWYG editing of JSP pages) you can consider NetBeans 5.0 or NetBeans 5.5 Beta. They also support JSF.

How to import Nikon Nef (raw Files) ?

Hello
I'm having problems importing Nikon Nef Raw files, PSE9 is displaying the message The file is damaged or file format
cannot be included. Any suggestions please.

You are going to need Adobe Camera Raw 6.3, but the only version that has been released is the Version 6.3 Release Candidate, which I don't think can be installed with PSE. You will have to wait until the final version of Adobe Camera Raw 6.3 is released.
The only workaround is to use the Version 6.3RC DNG Converter to convert your RAW files to DNG files, which can then be accessed by PSE.

Does importing MAX config settings file replace or append the existing MAX entries?

Similar Messages

Maybe you are looking for