Does Infinity Option 2 display monthly usage?

I know you can monitor monthly usage via your BT account on Infinity Option 1. Is it also displayed if you are on Option 2 even though, being unlimited, it's for information only?
Solved!
Go to Solution.

sijomi wrote:
I know you can monitor monthly usage via your BT account on Infinity Option 1. Is it also displayed if you are on Option 2 even though, being unlimited, it's for information only?
Hi there,
Yes you do still get a usage monitor on Infinity option 2.
See below for a screenie.
I hope this info helps.

Similar Messages

Why does iCal crash on display month as March 13?

My iCal crashes every time I try to display Mar 13 as a month view. I've seen some discussion of this from Feb 12, but surely apple have resolved this by now?

No, it hasn't been fixed yet.
Try removing any all-day events from the calendar for the 1st April 2013 e.g. if you are syncing the calendar from somewhere else (e.g. Outlook on a PC or iCal/Calendar on a Mac) then change it to a timed event instead of all-day (if you don't sync your calendar from anywhere then try going into list view, go to 1st April and change any 'all day' events to times e.g. change Easter Monday to start at something like 4am) - it seems that there is a problem with all day events on that date which is when the clocks change due to daylight saving on the day before.

Broadband monthly usage BT Broadband Option 1

We started using BT Broadband Option 1 last month and have a download limit of 10GB each month. We were quite surprised to receive an email saying we'd already used over 7.5GB during February. We don't download music or films and most of our internet useage is sending a few emails, some browsing (but not excessive) and Facebook most days for a while. Does anyone know whether using Facebook for games would cause our usage to be high? I also bought a card making computer programme which involved some digital downloads, so maybe this has also added a lot to the usage.(Our previous internet provider gave a 40GB allowance, so we've never come across this problem before but the customer service was so bad we needed to change.) Any help would be appreciated. Thanks.

SusieM wrote:
Thanks again to you both. It's made us a bit wiser how quickly the allowance can be used up. Thanks also for pointing out where we can find the usage monitor. I've made a note of it and will be checking the monitor daily.
Hi Susie.
For a quick link to the usage monitor, have a look at my shortcuts (link below) options 14d-14j - the latter two are for the newest version.
http://www.andyweb.co.uk/shortcuts
http://www.andyweb.co.uk/pictures

What is the Infinity option 2 usege limit?

hello all.
what is the Infinity option 2 usage limit? is it 100gb or 300gb? a month.
cos its been 5 days now I'm getting very bad speed, 2 mb down and .8mb up after 6 pm till 2am. this is absolutely rubbish paying £24.99 a month for this **bleep**!! and i cant even watch anything online!!
regards
Ben
Solved!
Go to Solution.

zodfsx wrote:
hello all.
what is the Infinity option 2 usage limit? is it 100gb or 300gb? a month.
cos its been 5 days now I'm getting very bad speed, 2 mb down and .8mb up after 6 pm till 2am. this is absolutely rubbish paying £24.99 a month for this **bleep**!! and i cant even watch anything online!!
regards
Ben
Hi Ben.
The threshold figure is 300GB per month.
Click https://www.bt.com/appsyouraccount/secure/cyahub.do and enter your bt.com associated login ID and password (if it doesn't already let you in). The ID needs to be associated with your BB phone number.
Go down to Manage your services, click the Broadband tab, and then choose View your broadband usage.
http://www.andyweb.co.uk/shortcuts
http://www.andyweb.co.uk/pictures

3 questions about 'BT Infinity' Option 2

So here they are.
1) Is the 100gb limit for BT broadband option 3 customers, definately the same usage limit for BT Infinity option 2 customers?
2) When the cap is reached, is the cap in place 24 hours a day for approximately 30 days, or is the cap in place only between peak hours (5pm - 12pm), i.e. do speeds return to normal at off peak hours even though you hit the 100gb cap?
3) Assuming the cap is only in place during peak hours, if you use the line heavilly during off peak hours, will you then be capped at 1meg constantly for those 30 days?

thanks, hopefully some other users here can fill in the blanks.
I'm in a situation where i stand to strip the 100gb cap with upload alone.
It's pretty much the main reason i'm even considering switching from Be* Pro, whome i currently get 14meg down, 1.8meg up with, i design websites and such, a lot of this involves uploading/downloading large databases and entire site structures which is why the higher upload speed appeals to me, but at the same time i do not wish to switch if i'll only get about a weeks normal usage before only being able to use it normally at off peak hours.
Since a lot of the design work i do is for american and chinese clients it doesn't really matter if the net is slow at 5pm-midnight, since during this time i do little to no work via the net and it's used purely for browsing/email, during the night and mornings however my usage can soar considerably.
My currently FTP tools indicate that in site work alone this month i have uploaded 194gb and downloaded 87, in just 14 days.

Can't display month view

Every time I try to display month view on my calendar ical just disappears, it can't do it for some reason. It can display week or day views just not month. Does anyone know what might be going on?

Hi Dereck,
Try deleting iCal's preference file.
See this link for how to do this:
http://discussions.apple.com/message.jspa?messageID=1032377#1032377
Best wishes
John M

Display Month verbiage on chart but sort by month number

Hello,
I have inserted a simple bar chart (values by month for a single year) and my goal is to get the data values to group by month.
I found that I can achieve this by using a formula that extracts the month from my Date/TIme field MONTH({Command.OB_DELIVERY_DATE}).
This works OK and displays months as 1, 2, 3, etc. on my chart), but I want to display the month text instead (Jan, Feb, Mar)
I tried a second variable: ToText({Command.OB_DELIVERY_DATE},'MMMM')
This works in displaying the verbiage of the months, however, the problem is that it groups the months on my chart alphabetically now (April is now my 1st month instead of January).
What is the trick to displaying month verbiage on my chart, but still sorting these months in their proper numerical order?
Many Thanks!

Hi Dave,
Try this please:
1) Insert a Crosstab and place it on the Report Header. Use the Delivery Date field as the row and add the measure field as the Summary Field with the right Sum function
2) Highlight the Delivery Date field > Group Options > set it to print 'For Each Mointh'
3) While in the Crosstab Expert highlight the Delivery Date field > Click Group Options > Options tab > check the option 'Customize Group Name field' > Select 'use formula as group name' and click the formula button beside. Use this code:
ToText({Command.OB_DELIVERY_DATE},'MMMM')
4) Right-click the Crosstab and select Insert Chart. Choose the right Chart Type
5) Suppress the Section that holds the Crosstab
Hope this helps.
-Abhilash

T510 missing options for display resolution

I am looking to order a T510. Lenovo site does not show options for display resolutions any more. I need WUXGA, how do I verify this before placing an order?

Hi vijpersonal,
There is no T510 with WUXGA. WUXGA is 1920x1200, but the new Thinkpads got FHD which is 1920x1080. As far as i understand it's hard to get a T510 with FHD at the moment. Seems like Lenovo have some delivery problems for models with the FHD panel. If you search for FHD in this forum you can find a lot of discussions about that topic. I'm sure the FHD will be available soon, but don't know when that might happen. You can also get the W510 with the FHD panel and those should be possible to buy now.
You can find the Thinkpad Notebooks pdf using this link: http://www.lenovo.com/psref/
Then you can find detailed spec for a lot of Thinkpads. I don't think you will find any T510 with FHD at the moment though.
Also i'm not sure where you are looking since i just checked shop.lenovo.com and for each of the models the resolution are specified.
-gan

SELECT-OPTIONS : No-Display?

Hi Experts,
One simple doubt, pls. clarify that,
Wht is the practical use of NO-DISPLAY in SELECT-OPTIONS(I gone thru SAP help, but did not get any!)? like,
<b>p_vprsv like mbew-vprsv no-display.</b>
thanq.

The LOW and HIGH fields of a selection option are displayed in a length up to 18 bytes long (scrollable up to 45 bytes). If you define a length longer than 45, fields are truncated on the selection screen after the 45th character. This affects the first line of the SELECT-OPTIONS table. You can, however, pass longer selection options to a report if they are specified with the addition NO-DISPLAY and thus do not appear on the selection screen. Without NO-DISPLAY , the fields are then truncated whenever the selection screen is processed in the background (SUBMIT without VIA SELECTION-SCREEN ).
... NO-DISPLAY
Effect
Does not display the selection on the selection screen. Creates the internal table sel as with 'normal' selection options and you can then transfer the selection option with SUBMIT .
These selection options represent a part of the interface which the user does not see on the selection screen. You can set the values either internally (through the routine INIT in SAPDBldb or INITIALIZATION in the report) or with SUBMIT . These selection options are also stored for variants.
Sometimes, (e.g. when the user has entered particular values for other selection options or parameters ), you may want to display these undisplayed selection options on the screen so that the user can enter values. You can do this in the routine PAI of the database program SAPDBldb (for database-specific selection options) or under AT SELECTION SCREEN (for report-specific selection options) by calling a function module (see CALL FUNCTION ) or your own screen (CALL SCREEN .
also refer this
http://www.erpgenie.com/phpBB2/viewtopic.php?p=16454&sid=74b2d670b72ac27732cbee2f97d51098
regards,
srinivas
<b>*reward for useful answers*</b>

How to display Month values in SSRS report

Hi All,
I have a requirement to display month values in SSRS Chart. x-axis should display all month names from January till current month. How can I set this properties and show it in a line graph
Thanks & Regards,
Regards RCP

Hi,
The above link is not meeting my requirement. I need January till July to be displayed in x-axis
labels of graph. How this can be achieved ??
Regards RCP
You can create a calendar table on the fly and use it for your dataset to be used in the graph. Use logic as below
http://visakhm.blogspot.in/2010/02/generating-calendar-table.html
For getting January till current month use query as
DECLARE @Start datetime,@End datetime
SELECT @Start = DATEADD(yy,DATEDIFF(yy,0,GETDATE()),0),
@End = GETDATE()
SELECT *
FROM dbo.CalendarTable(@Start,@End,0,1) f
As a long time persistent solution best option would be to create a calendar table in the database.
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

Web Dynpro ABAP - Select Option and ALV Component Usage

Hi,
I'm new in ABAP Web Dynpro and i was trying to follow the SDN tutorial
Web Dynpro ABAP - Select Option and ALV Component Usage
In this video, we create a new Web Dynpro ABAP component that uses both Select Options and ALV. Developers can learn the basic mechanisms for working with both of these reusable components.
Following the link: https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/media/uuid/39c54fe7-0b01-0010-0eb6-d63ac2bdd637
I implemented and generated the web dynpro with success but when i execute a test i get a dump on select-option definition.
Note
The following error text was processed in the system ECD : Exception condition "TYPE_NOT_FOUND" raised.
The error occurred on the application server ITAWSECCS01D_ECD_00 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: DESCRIBE_BY_NAME of program CL_ABAP_TYPEDESCR=============CP
I went in debug and the piece of code dumping is:
lt_range_table =
wd_this->m_handler->create_range_table( i_typename = 'S_PROJ' ).
Is there someone who can help me?
Thanks in advance,
Stefano.

Hi,
I'm new in ABAP Web Dynpro and i was trying to follow the SDN tutorial
Web Dynpro ABAP - Select Option and ALV Component Usage
In this video, we create a new Web Dynpro ABAP component that uses both Select Options and ALV. Developers can learn the basic mechanisms for working with both of these reusable components.
Following the link: https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/media/uuid/39c54fe7-0b01-0010-0eb6-d63ac2bdd637
I implemented and generated the web dynpro with success but when i execute a test i get
an error as
Note
The following error text was processed in the system EI6 : Exception condition "TYPE_NOT_FOUND" raised.
The error occurred on the application server EC6IDES_EI6_01 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: DESCRIBE_BY_NAME of program CL_ABAP_TYPEDESCR=============CP
I have created a table zmy_table and trying to make USERID field as a select-options.I've written the code as shown below .
data: itab type standard table of zmy_table,
wa type zmy_table.
data:
node_employee type ref to if_wd_context_node,
elem_employee type ref to if_wd_context_element,
stru_employee type wd_this->element_employee ,
item_userid like stru_employee-userid.
navigate from <CONTEXT> to <EMPLOYEE> via lead selection
node_employee = wd_context->get_child_node( name = wd_this->wdctx_employee ).
@TODO handle not set lead selection
if ( node_employee is initial ).
endif.
get element via lead selection
elem_employee = node_employee->get_element( ).
@TODO handle not set lead selection
if ( elem_employee is initial ).
endif.
alternative access via index
Elem_Employee = Node_Employee->get_Element( Index = 1 ).
@TODO handle non existant child
if ( Elem_Employee is initial ).
endif.
get single attribute
elem_employee->get_attribute(
exporting
name = `USERID`
importing
value = item_userid ).
select *
from zmy_table
into table itab
where userid = item_userid.
node_employee = wd_context->get_child_node( 'EMPLOYEE' ).
node_employee->bind_elements( itab ).
Is there someone who can help me and can tell am i doing wrong?
Thanks in advance,
Dheeraj

Want to upgrade to infinity option 2 but sales hav...

Trying to upgrade to infinity option 2 and like another used tried the online way first that failed.
Called sales on 0800 800 900 and explained this.
Operator was helpful but thought this to be a tricky upgrade thought they may have call me back then thought they could do it while on the call. 10 mins later said that they would call me me back, still waiting
I am halfway through my current 24 month contract which is
BB TV Phone for £18 / month + £5 for anytime phone calls total £23.80
Line rental saver
I want to to infinity option 2 unlimited BB and maybe a speed increase !
Can you help

have you tryed and calling on 150 on the bt line make sure your bt line phone number is the same as the BB chack on mybt then if that needs changeing do that frist then speed upgrade

International calling planminutes per month usage

I was at one time able to minitor my international calling plans minute per month usage on one of Verizons web page. Since then I have lost that page that I saved as a Favorite when my computer crashed. Can anyone please let me know the web address on the Verizon home page to get to that page? It is so frustrating to try to keep track of my monthly international long distance calls.

ok then following these steps.
1.Go to over view page
2. Click on My verizon services
3.click on home phone do not choose any other option and a new page will open
4.left hand side will be written phone plan in blue click on it and that page will take there for info that you are looking for
A Green bar of your minutes usages

MeetingPlace 7.x: Custom Monthly Usage Report

We're running MP 7.0.3 and want to capture the Monthly Usage Report numbers for use in custom tables that match others in a presentation. The canned report is ugly...
I know we could just transpose the approximated numbers manually from the graphic, but I want the actual numbers. Short of doing an "Export Meetings" for 2 full years, does anyone of another method? Is there a way to export meetings and select only specific columns?

Did you ever work thru this?
I'm having a similar issue where my reports show only a fraction of the data they showed last month.

High monthly usage!!

My average monthly usage is 10gb. This month however I have so far reached 47gb and have done nothing more excessive. I Don't download music I have downloaded one movie from play this year and I don't do Online gaming. I phoned BT and they told me I used 10gb in one day. This was a day when nobody was in my house from 9to5 and the modem was switched off! My modem has a password etc. BT just keep saying it must be me?! Any ideas?

It is advisable to keep your router and modem on 24/7 unless you have a really good reason for doing otherwise.
Monitor your usage as described in this thread.
https://community.bt.com/t5/Bills-Packages/Unbelievable-BB-Usage/td-p/1237389
Using your Home Hub you can see what data is being used in realtime and what devices are connected so you need to know how to access this information.

Does Infinity Option 2 display monthly usage?

Similar Messages

Maybe you are looking for