Does installing Desktop Experience on Windows Server 2008 R2 SP1 slow down the server / increase processor usage?

Hello.
I'm running a tekkit classic (Minecraft) Server on a dedicated server I got from OVH, Im just wondering - Im currently using ClamAV for an antivirus, But I would like windows defender.
Im wondering if installing Desktop Experience on my dedi would increase processor usage or slow down the dedi even slightly.
System Specs:
RAM: 32GB DDR3 ECC 1600MHz
CPU: Intel Xeon E3-1245v2
HDD: 2x2TB SATA (Both used, specified as different drives)
OS: Windows Server 2008 R2 SP1
Theres only 1 indev tekkit server currently running on there, Im getting 0-5% processor usage. I may be setting up more modpack servers - but im wondering if installing desktop experience would increase the processor usage or slow the dedi down.
Thanks.
Joseph

Hi Joseph,
This is the forum for Microsoft BizTalk Server, you've asked your question in the wrong forum.
I suggest posting your question in the Windows Server forum
http://social.msdn.microsoft.com/Forums/en-US/home#forum=winserver2008appcompatabilityandcertification&filter=alltypes&sort=lastpostdesc&content=Search
Glenn Colpaert - MCTS BizTalk Server - Blog : http://blog.codit.eu

Similar Messages

Move Virtual Machine from Hyper-V Server 2008 R2 SP1 to Hyper-V Server 2012 fails with Error 2901

I have six Hyper-V 2008 R2 SP1 servers and two Hyper-V 2012 servers. I am running SCVMM 2012 SP1. I am trying to use "move virtual machine" from within SCVMM to move VMs from a 2008 host to a 2012 host. I have tried different VMs on different hosts
and they all fail with this error:
==========
Error (2901)
The operation did not complete successfully because of a parameter or call sequence that is not valid.
The parameter is incorrect (0x80070057)
Recommended Action
Ensure that the parameters are valid, and then try the operation again.
==========
I have successfully created a VM on one of the 2012 hosts and moved it to the other 2012 hosts. I can move VMs from 2008 host to 2008 host. I just cannot move VMs from 2008 host to 2012 host.
Does SCVMM 2012 SP1 not support moving VMs from Hyper-V 2008 to Hyper-V 2012?

Hello Kevin,
Have you got an resolution yet ? Do you have latest update roll up pack applied to SCVMM 2012 SP1?
With SCVMM 2012 SP1 " Running VMs (Live Migartion) and VMs which are in Saved state or having checkpoints can not be migrated from 2008R2 host to 2012 Host "
above was fixed in SCVMM 2012 Update Roll up 1
Apart this please check the approx. size of data (VHDs) which will get transferred over the network , If you have large files chances are more to get such errors.
Thanks
~NY

Server 2008 R2 SP1 - Software install - Error 1935 HRESULT:0x800736B5

I'm working on an error installing a product on Windows Server 2008 R2 SP1 machines. The server has been acting as a file server for months with no problems. The application requires .net 3.5 and .net 4 client profile to be installed. I'm able to pass the
prerequists portion of the installation but eventually the software halts near completion with the error
Error: 1935.An error occurred during the installation of assembly component {106BBB06-46FA-8A99-8361C13A0C}.
HRESULT: 0x800736B5.
I've found a couple articles that reference this article
http://answers.microsoft.com/en-us/windows/forum/windows_vista-windows_programs/error-1935an-error-occurred-during-the/7105ee7e-ab45-4bd2-b5db-a3e9002f7f9e , which I've tried with no success.
The other article I found was
http://answers.microsoft.com/en-us/office/forum/office_2007-office_install/error-code-1935-during-installation-on-windows-7/daee32ef-58f0-4d24-a1e0-8bfdab66185f which again I found no success with.
The weird thing about this error is that I cant find anything useful from the event viewer. Does anyone have any thoughts on this?
Thank you in advance!

Hi,
Thanks for posting in the forum.
Before going further, would you please let me know what the product you want to install on the server is? At this time, you could try to disable the anti-virus program first if it is installed
on the server. Then please try to reinstall the two version of .Net Framework and Visual C++ 2005 / 2008 Redistributable Package to see if the issue could be resolved.
Hope this helps.
Best Regards,
Andy Qi
TechNet Subscriber Support
If you are
TechNet Subscription user and have any feedback on our support quality, please send your feedback
here.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Unable to Install Windows Server 2012 on Windows Server 2008 R2 SP1 Hyper-V

My attempts to install are failing with a message "Windows cannot install required files. The file may be corrupt or missing....Error code: 0x800705070".
I am posting this on the Wondows 2012 Server forum but I have had exactly the same problem as described below with Windows 2008 R2 SP1.
As the title says this is on a Windows Server 2008 R2 SP1 host with all current updates. I have downloaded the ISO file from a Technet subscription file twice, once by direct download and once by the Akamai downloader. The virtual disk is connected with
the default IDE driver. I mounted both installation images as ISOs, located on a file system on the host server. I have tried installs by deleting the VM and recreating both the VM and a new virtual disk, re-using a previously created virtual disk, and
deleting the partitions in a previously created virtual disk, and executing the format command, and then attempting the install.
I have exactly the same problem trying to create a Windows Server 2008 R2 SP1 VM on the same host OS. With those attempts, I downloaded the Technet subscription iso 4 or 5 times, and burned one to a DVD which I attached to the created VM. Same
error message.
The virtual machines and virtual disks I created and used were all located on an RAID5 array, on a builtin Intel RAID controller using Intel Rapid Storage Technology software version 11.2.0.1066. The host Windows Server 2008 R2 SP1 uses this file system
but the OS is installed on a dedicated drive (C).
I had previously created a guest VM with Windows Server 2008 R2 (several months worth of updates ago) without drama.
I have spent hours reading forums and blog articles on this. A common response is to download the iso another time, and/or burn it to a DVD instead of mounting an iso image. Although I didn't do the later yet with 2012 Server, but I have done these
other steps attempting to install Windows 2008 Server SP1. The install process takes a while (not to mention doing multiple downloads). Given this seems to be a common recommended remedy, and indeed based on posts does seem to eliminate the problem is some
cases, why doesn't somebody change the Microsoft installer program so it does a thorough integrity check at the beginning of the install process?

Jeff,
After the exercise of Windows 2012 Server successfully installing (as I described above) I also successfully installed Windows 2008 R2 on Hyper-V. From my standpoint, I have eliminated the problem (which isn't the same as correcting the problem).
The answer to your specific question regarding Hyper-V support is that the motherboard I am using, an Asus P5Q, is not supported by Windows 2008 R2 because it doesn't use ECC memory, and the vendor doesn't say it supports Windows 2008. But I am sure you
know the motherboard vendors often don't test older motherboards with newer software versions. It appears that in specifying ECC memory Microsoft is trying to protect users of Windows Server from hurting themselves, not saying the software won't run.
Having said that, my suspicion in the beginning was, and still is, that it was some variable(s) left in an unknown state in the Hyper-V environment, which was why after trying to install Windows 2008 R2 several times I tried Windows 2012 which resulted in
the same error, and then encountered the same error trying to install Windows 7 on the same Hyper-V installation. The specific Hyper-V Windows 2008 R2 server had run without any operating problems for months before I started having trouble, and although it
had been quite a while since I had created VMs, that process used to work. The hardware didn't change. What changed was applying updates through Microsoft Update, and a few access control rights I changed, and at least I think, I set back to their original
value.
So in short, no, my hardware isn't supported by Windows 2008 Server. Two, your assertion that you are running the same software configuration that I am is very unlikely to be true. There are an extremely large number of things which are different between
your test system and mine, such as which Windows 2008 components are installed, what updates were installed and in what order they were installed, and what other third party software each of us is running, and between AD, and all the features, a large number
of potential differences in ACLs, options, etc. and I don't for a minute think this particular problem was caused by the underlying hardware.
I do appreciate your taking the time to try to help me, and I hope there is one thing you and I could agree on. Microsoft could pretty easily make it much easier to isolate problems. In this day and age reporting hex error codes (as opposed to doing the
table lookup in the error handling proc), and not providing more diagnostic information seems to me to be almost quaint. And in this case Microsoft can dismiss my problems on the grounds it was all on unsupported hardware. Unfortunately, I think they
are missing an opportunity to make their software better, because in my opinion what I encountered there are a set of conditions which will cause installations to fail that aren't going to get corrected.

Unable to install SQL server 2008 r2 standard edition on windows server 2008 r2 sp1

I am unable to install sql server 2008 r2 standard edition on windows server 2008 r2 sp1.
On the Setup Support Files page, choose Install this step I don't get any other window i.e. nothing happens I waited for 5-10 min. Then I checked the log file.
Final result:                  Failed: see details below
Exit code (Decimal):           -2068053929
Exit facility code:            1212
Exit error code:               87
Exit message:                  Failed: see details below
Start time:                    2014-03-18 14:59:31
End time:                      2014-03-18 15:00:25
=== Verbose logging started: 3/19/2014 9:45:47 Build type: SHIP UNICODE 5.00.7601.00 Calling process: E:\SQL Server 2008 R2 Standard\x64\setup100.exe ===
MSI (c) (10:34) [09:45:47:496]: Note: 1: 2203 2: E:\SQL Server 2008 R2 Standard\x64\redist\watson\dw20sharedamd64.msi 3: -2147287038
MSI (c) (10:34) [09:45:47:496]: MsiOpenPackageEx is returning 2.
=== Verbose logging stopped: 3/19/2014 9:45:47 ===
Please help As i am running out of time as i have to upgrade TFS for that first step is to install SQL server.

Hello,
The following are a few things you can try:
Copy the media to the local disk drive, unzip it (in case you are installing from an ISO file, and run SQL Server setup from there.
Try to unregister and register the Windows Installer with the following two commands:
msiexec /unregister
msiexec /regserver
Try to use Process Monitor to log the detailed error produced when the installation of dw20sharedamd64.msi fails. You can download Process Monitor from the following link:
http://technet.microsoft.com/en-us/sysinternals/bb896645
Share with us the error captured by Process Monitor.
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

Installing Desktop-Experience on CloudServices WorkerRole with osFamily=3

I have a startup task that runs elevated for a worker role:
<Startup>
<Task executionContext="elevated" taskType="background" commandLine="startup.bat" />
</Startup>
I have tried a variety of things but am left wanting:
powershell -command "Set-ExecutionPolicy Unrestricted" >> transcript.txt 2>&1
powershell -command "Install-WindowsFeature -Name Desktop-Experience -Restart" >> transcript.txt 2>&1
Another attempt:
REM : Install desktop experience if havent already
IF EXIST "step1done.txt" (
ECHO Already installed desktop experience so moving on >> transcript.txt
) ELSE (
ECHO ran desktopexperience install > step1done.txt
powershell -ExecutionPolicy Unrestricted -command "Install-WindowsFeature -Name Desktop-Experience" >> transcript.txt 2>&1
GOTO RestartForDesktopExperience
... OTHER SETUP STEPS ...
EXIT /b 0
:RestartForDesktopExperience
powershell -ExecutionPolicy Unrestricted -command "Restart-Computer" >> transcript.txt 2>&1
I have tried a variety of other things as well, but nothing seems to work. I would appreciate any thoughts?
Note: I am using osFamily=3 which is Server 2012 and therefore this link does not work for me: http://social.msdn.microsoft.com/Forums/en-US/8852425b-7253-4552-96c7-b26703f95521/action?threadDisplayName=install-desktop-experience-programmatically

Hi,
I test this powershell command line on my Server 2012 azure VM, the Desktop Experience install successful, so, maybe there is something wrong with the function that use a PowerShell Script as a Startup Task, please have a look at below document.
#http://msdn.microsoft.com/en-us/library/azure/jj130675.aspx
Best Regards,
Jambor
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Can't RDP From Windows 7 to Server 2008 R2 SP1

Hello,
We have a server 2008 R2 SP1 with all the latest updates installed as of today (11/12/2014) that runs terminal services.
We started upgrading our office computers to windows 7 x64 and now unable to RDP into the server. They were able to RDP for a few days and now are unable.
Once you hit connect, it asks for a username & password, and then it says configuring remote connection and after about 15-30 seconds it just says can not connect to remote computer.
I am able to RDP from windows 7 into 2003 servers.
Windows XP Computers can RDP just fine.
I went through all the articles that had the updates that needed to be removed/reinstalled for RDP to work and none of them fixed the issue.
This has been going on since Monday 11/10/2014
Any advice or assistance is greatly appreciated.

SP1 Is installed. as well as updated as of 11/12/2104
Here is the only thing that shows up in the logs on the server side:
Attempt to send connect message to Windows video subsystem failed. The relevant status code was 0xd0000001.
System
Provider
[ Name]
Microsoft-Windows-TerminalServices-LocalSessionManager
[ Guid]
{5D896912-022D-40AA-A3A8-4FA5515C76D7}
EventID
20
Version
0
Level
2
Task
0
Opcode
0
Keywords
0x1000000000000000
TimeCreated
[ SystemTime]
2014-11-12T23:47:45.532187000Z
EventRecordID
19249
Correlation
Execution
[ ProcessID]
644
[ ThreadID]
1624
Channel
Microsoft-Windows-TerminalServices-LocalSessionManager/Operational
Computer
LAXCA-PD-TS01.XXXXXXXXXXXXXXX.local
Security
[ UserID]
S-1-5-18
UserData
EventXML
messageName
connect
errorCode
0xd0000001

Can't Install Desktop Experience on Server 2012 - Sources problem

Hi Guys,
I have been struggling to install the Desktop Experience (Which includes Ink and Handwriting Services) feature on a new Server 2012 VM, and I haven't been able to. It always says it can't find the sources ("Do you need to specify an alternate source
path?"), even though the DVD image is readily accessible to the server I try yo deploy this to (the same server where I tried to add the feature from).
I think I have tried pretty much everything (From UI through Server Manager, to PowerShell and DISM), and I get "The source files could not be found".
My preferred method would be the UI one, but I still can't figure out what I am missing. The Server 2012 image is available on the server directly (through Hyper-V CD mount).
I know that by default, Windows will try to use Windows Update to get the feature files from (if no offline location is specified), but for some reason that one fails too.
I tried using as a source location (My understanding is that the files are inside the WIM):
- WIM:E:\Sources\Install.wim:2
- E:\Sources\SxS\
- Mounting the WIM in a folder on the C drive through DISM, and reference that path in the "Add Roles and Features screen"
And of the countless times I've tried, I always get "The source files could not be found. Try installing roles, role services, or features again in a New Add Roles and Features Wizard session, and on the confirmation page of the wizard, click "Specify an
alternate source path" to specify a valid location of the source files that are required for the installation. The location must be accessible by the computer account of the destination server."
I have rebooted the server, and I have made sure the DVD image is available (by opening the E drive on windows explorer and browsing through the installer folders.
As a side note, on this server I also installed .NET 3.5 from this same offline source, by referencing "E:\Sources\SxS\" as the install source, and everything went just fine. Still not sure what I am missing.
Thoughts?

Thansk Yan!
That clarifies why try to install it was failing. However, I have some other questions:
- How did this happen (This OS was installed from the regular Server 2012 Standard - Not Server Core that was converted to the GUI version)?.
- How can I fix it (Make Desktop Experience be listed as "Available") ?
UPDATE:
I tried installing the Desktop-Experience feature through PowerShell but this is what I got:
PS C:\Users\administrator.MF> Install-WindowsFeature Desktop-Experience -Source WIM:D:\Sources\Install.wim:2
Install-WindowsFeature : The request to add or remove features on the specified server failed.
Installation of one or more roles, role services, or features failed.
The source files could not be downloaded.
Use the "source" option to specify the location of the files that are required to restore the feature. For more
information on specifying a source location, see http://go.microsoft.com/fwlink/?LinkId=243077. Error: 0x800f0906
At line:1 char:1
+ Install-WindowsFeature Desktop-Experience -Source WIM:D:\Sources\Install.wim:2
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : InvalidOperation: (@{Vhd=; Credent...Name=localhost}:PSObject) [Install-WindowsFeature],
Exception
+ FullyQualifiedErrorId : DISMAPI_Error__Cbs_Download_Failure,Microsoft.Windows.ServerManager.Commands.AddWindowsF
eatureCommand
Success Restart Needed Exit Code Feature Result
False No Failed {}
UPDATE 2:
I mounted the WIM in a folder on the c drive through the command:
C:\WIM\Windows\WinSxS>Dism /Mount-Wim /WimFile:D:\Sources\Install.wim /Index:2 /MountDir:C:\WIM /ReadOnly
And ran the install feature again, now pointing to the actual WimSxS folder (as described here:
http://technet.microsoft.com/en-us/library/hh831786.aspx):
PS C:\Users\administrator.MF> Install-WindowsFeature Desktop-Experience -Restart -Source c:\wim\windows\winsxs
Install-WindowsFeature : The request to add or remove features on the specified server failed.
Installation of one or more roles, role services, or features failed.
The source files could not be downloaded.
Use the "source" option to specify the location of the files that are required to restore the feature. For more
information on specifying a source location, see http://go.microsoft.com/fwlink/?LinkId=243077. Error: 0x800f0906
At line:1 char:1
+ Install-WindowsFeature Desktop-Experience -Restart -Source c:\wim\windows\winsxs
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : InvalidOperation: (@{Vhd=; Credent...Name=localhost}:PSObject) [Install-WindowsFeature],
Exception
+ FullyQualifiedErrorId : DISMAPI_Error__Cbs_Download_Failure,Microsoft.Windows.ServerManager.Commands.AddWindowsF
eatureCommand
Success Restart Needed Exit Code Feature Result
False No Failed {}
I am still getting the same result.. Sources not found.

How to install bo xi 3.1 on windows server 2008 r2 sp1 (virtual machine )

HI GUYS --
operating system: I am trying to install Business Objects into a virtual computer which has a windows server 2008 R2 SP1 operating system. I installed version BO XI 3.1 and I also installed Service pack 3 and Service pack 4. I installed liveoffice usual way. Whenever I try to design xcelsius and dashboard, I got some errors. In order to fix these errors, I followed SAP notes step by step. However, It didnt help me at all. I also tried to install by looking at install guide and supported platform documents, but I get an error each time of doing that. I can write each error over here. I also opened a link over here. Check out the link please to see the errors how to display webi docs. in liveoffice?
My main question is this.
Are there anybody who works operating system windows server 2008 R2 SP1 and this installed into the virtual machine? If so, Is it worked by doing which installations exactly?
Note; Business Objects tools work very well (infoview, cmc, web intelligencei and the others work without problems at QAAWS BO XI 3.1, but they have been given cluster error at BO XI 3.1 SP3) . In addition, port server settings have been installed based on the installion guide. If you give me any information other than whatever I said, I appreciate that. I also point out something. If I dont get any message which I attached a sample when I try to operate life office. In this situation I cant see either my documets or web documents in infoview)
[http://imageshack.us/photo/my-images/3/sorunc.jpg/|http://imageshack.us/photo/my-images/3/sorunc.jpg/]

Hi SYaGCi,
Denis is right this is actually documented in the Supported Platforms Documentation:
"Windows 7 and Windows Server 2008 R2 are new platform support additions in Service Pack 3 which are only available for support on the SP3 full release install of SAP BusinessObjects Enterprise. The SP3 patch only release of SAP BusinessObjects Enterprise does not provide support for these two new platforms."
Kind regards,
John

Oracle 11g R2 install problem on Windows Server 2008 R2 SP1

Hi all,
Trying to install the Oracle 11g R2 database onto Windows Server 2008 R2 SP1.
I get as far as running the setup and a black window flashes up on the screen and disappears.
The log files only show the following:
Using paramFile: C:\Temp\database\install\oraparam.ini
Checking monitor: must be configured to display at least 256 colors. Actual 65536 Passed
The number of files bootstrapped for the jre is 0.
The number of files bootstrapped for the oui is 0.
I've tried running setup -debug from the command line but no further information is logged.
Any help in troubleshooting further is appreciated.

That is the complete log file. No error messages or further information is given.
I'm not sure how to check:
Statement of Direction: Oracle Database 11g Release 2 – Microsoft Windows 7 and Windows Server 2008 R2 [ID 867040.1]
I have checked on:
http://docs.oracle.com/cd/E11882_01/install.112/e24283/toc.htm
The server meets all the hardware requirements. The default file share is accessible and it is running a supported browser. The installer is being run with Admin rights. I'm not sure what else I need to check.

Getting error while trying to install ADRMS role on Windows Server 2008 R2 SP1.

Hello,
I am trying to install ADRMS on Windows Server 2008 R2 SP1 (This machine also has domain controller and Exchange Server 2010 SP3 installed). But I am getting following error:
Install-ADRMS : The configuration object is read only, because it has been committed by a call to ServerManager.CommitChanges().
If write access is required, use ServerManager to get a new reference. at Microsoft.Web.Administration.Configuration.SetDirty()
Not sure what is causing this error. Any help to solve it would be appreciated.
Thanks.
Jigar Mehta

Hello,
I am trying to install ADRMS on Windows Server 2008 R2 SP1 (This machine also has domain controller and Exchange Server 2010 SP3 installed). But I am getting following error:
Install-ADRMS : The configuration object is read only, because it has been committed by a call to ServerManager.CommitChanges().
If write access is required, use ServerManager to get a new reference. at Microsoft.Web.Administration.Configuration.SetDirty()
Not sure what is causing this error. Any help to solve it would be appreciated.
Thanks.
Jigar Mehta

Error when try to install exchange Server 2013 in windows server 2008 R2 Sp1

Hi
I'm getting these errors while trying to install Microsoft Exchange Server 2013 on my Windows Server 2008 R2 SP1 the user i'm using is the Administrator and it is already a member of "Enterprise
Admins" and "Schema Admins"
in my organization there is 6 Exchange server 2013 in 3 site windows server 2012 in this case
I have to install exchange 2013 in windows Server 2008 r2 sp1
the functional level 2008 R2 I getting these errors please help.
Errors:
This computer doesn't belong to a valid Active Directory site. Check the site and subnet definitions.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.InvalidADSite.aspx
Error:
A reboot from a previous installation is pending. Please restart the system and then rerun Setup.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.RebootPending.aspx
Error:
There is a pending reboot from a previous installation of a Windows Server role or feature. Please restart the computer and then run Setup again.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.PendingRebootWindowsComponents.aspx
Error:
You must be a member of the 'Organization Management' role group or a member of the 'Enterprise Admins' group to continue.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.GlobalServerInstall.aspx
Error:
You must use an account that's a member of the Organization Management role group to install or upgrade the first Mailbox server role in the topology.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.DelegatedBridgeheadFirstInstall.aspx
Error:
You must use an account that's a member of the Organization Management role group to install the first Client Access server role in the topology.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.DelegatedCafeFirstInstall.aspx
Error:
You must use an account that's a member of the Organization Management role group to install the first Client Access server role in the topology.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.DelegatedFrontendTransportFirstInstall.aspx
Error:
You must use an account that's a member of the Organization Management role group to install or upgrade the first Mailbox server role in the topology.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.DelegatedMailboxFirstInstall.aspx
Error:
You must use an account that's a member of the Organization Management role group to install or upgrade the first Client Access server role in the topology.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.DelegatedClientAccessFirstInstall.aspx
Error:
You must use an account that's a member of the Organization Management role group to install the first Mailbox server role in the topology.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.DelegatedUnifiedMessagingFirstInstall.aspx
Error:
Setup encountered a problem while validating the state of Active Directory: Could not find information about the local site. This can be caused by incorrect configuration of subnets or sites or by replication latency. See the Exchange setup log for more
information on this error.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.AdInitErrorRule.aspx
Error:
Either Active Directory doesn't exist, or it can't be contacted.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.CannotAccessAD.aspx

I think it's from subnet in site and services
have 3 site A,B,C and new site is "D"I have problem in "D" site
A subnet is 10.33.50.0/24 AD 2012 ,exchange 2013
B subnet is 10.35.50.0/24 AD 2012 ,exchange 2013
C subnet is 10.36.50.0/24 AD 2012 ,exchange 2013
D subnet is 10.100.100.0/25 AD 2008 ,exchange 2013 error when install it
find event error
The description for Event ID 6 from source MSExchange CmdletLogs cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair
the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
test-SetupPrerequisites
{Roles={LanguagePacks, Bridgehead, ClientAccess, UnifiedMessaging, Mailbox, FrontendTransport, Cafe}, LanguagesAvailableToInstall=True, DomainController=, CustomerFeedbackEnabled=True, ExchangeVersion=15.0.847.32, LanguagePackDir=D:\Exchange
Server Software, SufficientLanguagePackDiskSpace=True, ADInitError=Setup encountered a problem while validating the state of Active Directory: Could not find information about the local site. This can be caused by incorrect configuration of subnets or sites
or by rep, ScanType=PrecheckInstall, LanguagePackVersioning=True, HostingDeploymentEnabled=False, TargetDir=C:\Program Files\Microsoft\Exchange Server\V15, SetupRoles={LanguagePacks, AdminTools, Bridgehead, ClientAccess, UnifiedMessaging, Mailbox, FrontendTransport,
Cafe}}

Get-Hotfix InstalledOn property not returning hotfix installed Date and Time on Windows Server 2008 SP2 but works on Windows Server 2008 R2 SP1

Hi,
I am working on a validation script to get the list of hotfixes installed on Domain Controllers every month as part of our monthly DC patching process. I have been successful in getting these details for DC's with (Windows Server 2008
R2 SP1, Powershell v2.0) using the below command.
Get-HotFix -cn $computer | Select-Object PSComputerName,HotFixID,Description,InstalledBy,InstalledOn | where InstalledOn -ge (Get-Date -Day 1 -Format d) | FT -AutoSize
I execute the above from a jump box with powershell v4.0 (Server 2008 R2)
However, when I try the same command from the jump box to query DC's with (Server 2008 SP2, powershell v2.0). It doesn't return the InstalledOn date and time. It was giving error for the InstalledOn property and hence I renamed it to $_.InstalledOn. Now
I don't get error but still no details displayed for InstalledOn property.
I tried using the below, as could see on few forums that this might resolve the issue. I also tried removing the "where" part but still no installation date returned.
Get-HotFix -cn $computer | Select-Object HotFixID, Description, InstalledBy, @{l="InstalledOn";e={[DateTime]::Parse($_.psbase.properties["installedon"].value,$([System.Globalization.CultureInfo]::GetCultureInfo("en-US")))}}
| where {$_.InstalledOn -ge (Get-Date -Day 1 -Format d)} | FT -AutoSize
Have tried this locally on the 2008 SP2 DC but still not working. Please advise what is going wrong?
Note: If I execute the below command locally on the 2008 SP2 DC, I am getting the InstalledOn output. However, when executed from the jump box with powershell v4.0 (Server 2008 R2) to query
the same 2008 SP2 DC, it just gives the prompt again without any error or output. This behavior is consistent for other 2008 SP2 DC's in the environment.
Get-HotFix -cn $computer | Select-Object HotfixID,Description,InstalledBy,InstalledOn | where {$_.InstalledOn -ge (Get-Date -Day 1 -Format d)} | FT -AutoSize

Hi jrv, I have already tried the Win32_QuickFixEngineering option, which doesn't work either. Apologies for not mentioning the workarounds that I have already tried.
Get-Hotfix seems to be just a wrapper for Win32_QuickFixEngineering as per the below article. (http://technet.microsoft.com/en-us/library/hh849836.aspx)
I have seen a mention of using the WU ActiveX control on few forums, but was too lazy to read it through.
After rigorous testing, it makes me realize that somewhere the Get-Hotfix dates formatting\comparison isn't working.

Unable to install the security patches KB2677070 in Windows Server 2008 R2 SP1 (The update is not applicable to your computer)

Dear everyone,
We are trying to install the below KB in our windows server 2008 R2 SP1, however, it will show "The update is not applicable to your computer". There is no problems to install the other patches except this one. Do anyone have idea about it?
http://support.microsoft.com/kb/2677070
Thanks,
Users

Hi,
According to this KB article, there are many exceptions where this KB is not applicable.
Please perform the following steps:
Expand the “For all supported…” title in the File Information section in the KB article.
Find Crypt32.dll.mui files on your machine.
Then compare the file version, file size, data and time with the ones listed in the KB article.
If there is a match, then this KB doesn’t apply to your machine, which is by design.
Hope this helps.
Best Regards,
Amy Wang

Windows Server 2008 R2 SP1 - BSOD Stop Error 0x00000050 RDPWD.SYS

Hi all,
I have been struggling with a BSOD for the past 5 weeks and have scoured the web trying in vain to find someone else with the same issue.
Environment:
8 x 2008 R2 SP1 Windows Servers (8Gb RAM, 25Gb HDD) with Remote Desktop Services Roles installed, running as part of an RDS Farm. All Servers are VM Guests (hardware version 7) running on VMware vSphere v4.1.0-260247 Hosts (Dell
PowerEdge R710 - 128Gb RAM). Our vSphere 'farm' has 5 Hosts that connect to our EMC SAN via iSCSI with multipath routes.
Each RDS Server is load balanced via a Connection Broker, and each server has the same set of software / vm hardware installed. In a nutshell, each has Symantec Endpoint Protection v11.0.5002.333, Symantec Altiris v7.0, Microsoft Office 2007 as well as
other various software essential to these servers.
Symptoms:
Randomly throughout the day, one (or more) of the RDS Servers will crash with a BSOD more often than not with "caused by driver ntoskrnl.exe" sometimes with "cng.sys" and once with "ksecpkg.sys". So far in the 5 weeks I have had 90 crashes. Yesterday
all 8 of the RDS Servers crashed at some point throughout the day.
On a typical BSOD, it says:
The problem seems to be caused by the following file: ntoskrnl.exe
PAGE_FAULT_IN_NONPAGED_AREA
Technical Information:
*** STOP: 0x00000050 (0xfffffa800c153284, 0x0000000000000001, 0xfffff880053dc0c9, 0x0000000000000000)
*** ntoskrnl.exe - Address 0xfffff8000169ac40 base at 0xfffff8000161e000 DateStamp 0x4e02aaa3
Using BlueScreenView it says "caused by address: ntoskrnl.exe+7cc40" nearly every time.
I have analysed as best I could using Microsoft WinDbg, and this is the output of a typical mini-dump file:
Microsoft (R) Windows Debugger Version 6.12.0002.633 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [\\hqrds01\c$\Windows\Minidump\030112-19359-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available
Symbol search path is: SRV*C:\Program Files\Debugging Tools for Windows (x64)\Symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7601 (Service Pack 1) MP (2 procs) Free x64
Product: Server, suite: TerminalServer
Built by: 7601.17640.amd64fre.win7sp1_gdr.110622-1506
Machine Name:
Kernel base = 0xfffff800`01609000 PsLoadedModuleList = 0xfffff800`0184e670
Debug session time: Thu Mar 1 09:14:00.921 2012 (UTC + 0:00)
System Uptime: 0 days 21:31:41.950
Loading Kernel Symbols
Loading User Symbols
Loading unloaded module list
*                        Bugcheck Analysis
Use !analyze -v to get detailed debugging information.
BugCheck 50, {fffffa800be83284, 1, fffff8800576f0c9, 0}
Could not read faulting driver name
Probably caused by : RDPWD.SYS ( RDPWD!memcpy+1d9 )
Followup: MachineOwner
1: kd> !analyze -v
*                        Bugcheck Analysis
PAGE_FAULT_IN_NONPAGED_AREA (50)
Invalid system memory was referenced. This cannot be protected by try-except,
it must be protected by a Probe. Typically the address is just plain bad or it
is pointing at freed memory.
Arguments:
Arg1: fffffa800be83284, memory referenced.
Arg2: 0000000000000001, value 0 = read operation, 1 = write operation.
Arg3: fffff8800576f0c9, If non-zero, the instruction address which referenced the bad memory
address.
Arg4: 0000000000000000, (reserved)
Debugging Details:
Could not read faulting driver name
WRITE_ADDRESS: GetPointerFromAddress: unable to read from fffff800018b8100
fffffa800be83284
FAULTING_IP:
RDPWD!memcpy+1d9
fffff880`0576f0c9 668901          mov     word ptr [rcx],ax
MM_INTERNAL_CODE: 0
CUSTOMER_CRASH_COUNT: 1
DEFAULT_BUCKET_ID: VERIFIER_ENABLED_VISTA_MINIDUMP
BUGCHECK_STR: 0x50
PROCESS_NAME: svchost.exe
CURRENT_IRQL: 0
TRAP_FRAME: fffff8800bf70a80 -- (.trap 0xfffff8800bf70a80)
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=000000000000023d rbx=0000000000000000 rcx=fffffa800be83284
rdx=ffffffffffe7e63b rsi=0000000000000000 rdi=0000000000000000
rip=fffff8800576f0c9 rsp=fffff8800bf70c18 rbp=0000000000000001
r8=000000000000001c r9=fffff8a0033401e8 r10=fffff8a0033401e8
r11=fffffa800be83268 r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=0000000000000000
iopl=0         nv up ei pl nz na pe nc
RDPWD!memcpy+0x1d9:
fffff880`0576f0c9 668901          mov     word ptr [rcx],ax ds:0c40:fffffa80`0be83284=????
Resetting default scope
LAST_CONTROL_TRANSFER: from fffff800016319fc to fffff80001685c40
STACK_TEXT:
fffff880`0bf70918 fffff800`016319fc : 00000000`00000050 fffffa80`0be83284 00000000`00000001 fffff880`0bf70a80 : nt!KeBugCheckEx
fffff880`0bf70920 fffff800`01683d6e : 00000000`00000001 fffffa80`0be83284 00000000`00000000 fffff8a0`0be85820 : nt! ?? ::FNODOBFM::`string'+0x4611f
fffff880`0bf70a80 fffff880`0576f0c9 : fffff880`057547cf 00000000`00000000 00000000`00000022 00000000`00000002 : nt!KiPageFault+0x16e
fffff880`0bf70c18 fffff880`057547cf : 00000000`00000000 00000000`00000022 00000000`00000002 fffff880`0576c99d : RDPWD!memcpy+0x1d9
fffff880`0bf70c20 fffff880`0576c9fc : fffff8a0`0f938010 00000000`00000022 00000000`00000019 00000000`00000002 : RDPWD!SM_MCSSendDataCallback+0x303
fffff880`0bf70c60 fffff880`0576b354 : fffff880`0bf70da0 fffff8a0`033401e8 00000000`00000000 fffff880`0576abfd : RDPWD!HandleAllSendDataPDUs+0x188
fffff880`0bf70d10 fffff880`0576af64 : 00000000`00000031 fffffa80`0bd01895 00000006`0000001f fffff880`05739079 : RDPWD!RecognizeMCSFrame+0x28
fffff880`0bf70d50 fffff880`029ba1f8 : fffff8a0`03345000 fffffa80`0bae6e80 fffffa80`0a5c0e60 fffff880`05737e00 : RDPWD!MCSIcaRawInputWorker+0x3d4
fffff880`0bf70df0 fffff880`057378d0 : 00000000`00000000 fffff880`0bf70f10 fffff880`0bf70f08 00000000`00000000 : termdd!IcaRawInput+0x50
fffff880`0bf70e20 fffff880`05736d85 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : tssecsrv!CRawInputDM::PassDataToServer+0x2c
fffff880`0bf70e50 fffff880`057367c2 : fffffa80`088e8a28 fffffa80`00000000 00000000`00000031 fffff800`00000000 : tssecsrv!CFilter::FilterIncomingData+0xc9
fffff880`0bf70ef0 fffff880`029ba1f8 : fffff880`009b8180 00000000`00000001 00000000`00000000 00000000`00000000 : tssecsrv!ScrRawInput+0x82
fffff880`0bf70f60 fffff880`0572c4c5 : fffffa80`088e8a10 fffffa80`0bd01658 00000000`00000000 fffffa80`088e8a10 : termdd!IcaRawInput+0x50
fffff880`0bf70f90 fffff880`029baf3e : fffffa80`0bd01620 fffffa80`0c100420 fffffa80`0bd4b450 fffffa80`0973b9b0 : tdtcp!TdInputThread+0x465
fffff880`0bf71810 fffff880`029b9ae3 : fffffa80`09d902b0 fffffa80`0973b9b0 fffffa80`093d8520 fffffa80`0bd4b450 : termdd!IcaDriverThread+0x5a
fffff880`0bf71840 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : termdd!IcaDeviceControlStack+0x827
STACK_COMMAND: kb
FOLLOWUP_IP:
RDPWD!memcpy+1d9
fffff880`0576f0c9 668901          mov     word ptr [rcx],ax
SYMBOL_STACK_INDEX: 3
SYMBOL_NAME: RDPWD!memcpy+1d9
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: RDPWD
IMAGE_NAME: RDPWD.SYS
DEBUG_FLR_IMAGE_TIMESTAMP: 4ce7ab45
FAILURE_BUCKET_ID: X64_0x50_VRF_RDPWD!memcpy+1d9
BUCKET_ID: X64_0x50_VRF_RDPWD!memcpy+1d9
Followup: MachineOwner
The RDS servers are set to reboot automatically, and after a period of 5 minutes or so, the users can reconnect and log back in. On a typical day each server will have around 10 people RDP'd in to them.
The Users connecting to the RDS Servers included XP laptops/desktops and IGEL UD-120-LX Thin Terminals. The XPs have SP3 installed and are fully patched via Symantec Altiris.
Things I have tried:
- Analyse the dump-files (as per above).
- I have tracked each user logging on to the RDS Farm (via batch scripts) and tried to determine if this is caused by the same individual(s) but it appears random.
- Check to see if the crashing Virtual Machine is running on a specific host, but it has happened on all Hosts.
- Check to see if there was anything specific that happened on the day that the crashes started. There were about 5 new poeple introduced to the RDS Farm at that time, but there were using (a) client machines that had been used previously elsewhere with
no issues, (b) software that had been used previously, (c) in a remote location that had previous users using RDS, (d) have not been logged on to a RDS Server when it has crashed.
- Updated Windows Server 2008 R2 SP1 to the latest patches (as of Feb 2012).
- Turned on Verifier (using recommended settings), and then analysed dump-files with the same reference to rdpwd.sys.
- Fixed the Memory Resource Reservation in vSphere to the full 8Gb for all these RDS Servers (so that the memory is not shared at all).
- Ran MEMTEST on a VM Guest with the full 8Gb RAM, on a couple of the ESX Hosts.
- Changed the VMTools Video Driver to the SVGA II driver from the Standard VGA Driver.
- Ran a full AV Scan (using SEP).
- Isolated the Printer Drivers using the Printer Management MMC.
- Ran sfc /scannow of all RDS Servers and rebooted.
The mini-dump file mentioned above is here:https://skydrive.live.com/redir.aspx?cid=48f471f287af2349&resid=48F471F287AF2349!105&parid=48F471F287AF2349!103
I hope someone can help, as what hair I have left (from pulling it out) is turning grey!
Andy

*                        Bugcheck Analysis
PAGE_FAULT_IN_NONPAGED_AREA (50)
Invalid system memory was referenced. This cannot be protected by try-except,
it must be protected by a Probe. Typically the address is just plain bad or it
is pointing at freed memory.
Arguments:
Arg1: fffffa800c153284, memory referenced.
Arg2: 0000000000000001, value 0 = read operation, 1 = write operation.
Arg3: fffff880053dc0c9, If non-zero, the instruction address which referenced the bad memory
   address.
Arg4: 0000000000000000, (reserved)
Debugging Details:
Could not read faulting driver name
WRITE_ADDRESS: GetPointerFromAddress: unable to read from fffff800018cd100
fffffa800c153284
FAULTING_IP:
RDPWD!memcpy+1d9
fffff880`053dc0c9 668901          mov     word ptr [rcx],ax
MM_INTERNAL_CODE: 0
CUSTOMER_CRASH_COUNT: 1
DEFAULT_BUCKET_ID: VERIFIER_ENABLED_VISTA_MINIDUMP
BUGCHECK_STR: 0x50
PROCESS_NAME: svchost.exe
CURRENT_IRQL: 0
TRAP_FRAME: fffff8800aa48a80 -- (.trap 0xfffff8800aa48a80)
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=00000000000001ff rbx=0000000000000000 rcx=fffffa800c153284
rdx=ffffffffffee6b8b rsi=0000000000000000 rdi=0000000000000000
rip=fffff880053dc0c9 rsp=fffff8800aa48c18 rbp=0000000000000001
r8=000000000000001c r9=fffff8a0123923a8 r10=fffff8a0123923a8
r11=fffffa800c153268 r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=0000000000000000
iopl=0         nv up ei pl nz na pe nc
RDPWD!memcpy+0x1d9:
fffff880`053dc0c9 668901          mov     word ptr [rcx],ax ds:8c40:fffffa80`0c153284=????
Resetting default scope
LAST_CONTROL_TRANSFER: from fffff800016469fc to fffff8000169ac40
STACK_TEXT:
fffff880`0aa48918 fffff800`016469fc : 00000000`00000050 fffffa80`0c153284 00000000`00000001 fffff880`0aa48a80 : nt!KeBugCheckEx
fffff880`0aa48920 fffff800`01698d6e : 00000000`00000001 fffffa80`0c153284 00000000`00000000 fffff8a0`10919830 : nt! ?? ::FNODOBFM::`string'+0x4611f
fffff880`0aa48a80 fffff880`053dc0c9 : fffff880`053c17cf 00000000`00000000 00000000`00000022 00000000`00000002 : nt!KiPageFault+0x16e
fffff880`0aa48c18 fffff880`053c17cf : 00000000`00000000 00000000`00000022 00000000`00000002 fffff880`053d999d : RDPWD!memcpy+0x1d9
fffff880`0aa48c20 fffff880`053d99fc : fffff8a0`10cf30d0 00000000`00000022 00000000`00000019 00000000`00000002 : RDPWD!SM_MCSSendDataCallback+0x303
fffff880`0aa48c60 fffff880`053d8354 : fffff880`0aa48da0 fffff8a0`123923a8 00000000`00000000 fffff880`053d7bfd : RDPWD!HandleAllSendDataPDUs+0x188
fffff880`0aa48d10 fffff880`053d7f64 : 00000000`00000031 fffffa80`0c039de5 00000006`0000001f fffff880`053a6079 : RDPWD!RecognizeMCSFrame+0x28
fffff880`0aa48d50 fffff880`012c01f8 : fffff8a0`12393000 fffffa80`0bb7aa60 fffffa80`0b81e9c0 fffff880`053a4e00 : RDPWD!MCSIcaRawInputWorker+0x3d4
fffff880`0aa48df0 fffff880`053a48d0 : 00000000`00000000 fffff880`0aa48f10 fffff880`0aa48f08 fffffa80`0c039ba8 : termdd!IcaRawInput+0x50
fffff880`0aa48e20 fffff880`053a3d85 : fffff880`01716890 fffffa80`0c0327e8 00000000`00000000 00000000`00000000 : tssecsrv!CRawInputDM::PassDataToServer+0x2c
fffff880`0aa48e50 fffff880`053a37c2 : fffffa80`0c16e598 fffffa80`00000000 00000000`00000031 fffff800`00000000 : tssecsrv!CFilter::FilterIncomingData+0xc9
fffff880`0aa48ef0 fffff880`012c01f8 : fffff880`009b8180 00000000`00000001 00000000`00000000 00000000`00000000 : tssecsrv!ScrRawInput+0x82
fffff880`0aa48f60 fffff880`052994c5 : fffffa80`0c16e580 fffffa80`0c039ba8 00000000`00000000 fffffa80`0c16e580 : termdd!IcaRawInput+0x50
fffff880`0aa48f90 fffff880`012c0f3e : fffffa80`0c039b70 fffffa80`0acccf20 fffffa80`0a95c450 fffffa80`0abf9620 : tdtcp!TdInputThread+0x465
fffff880`0aa49810 fffff880`012bfae3 : fffffa80`0c0a6560 fffffa80`0abf9620 fffffa80`087eee80 fffffa80`0a95c450 : termdd!IcaDriverThread+0x5a
fffff880`0aa49840 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : termdd!IcaDeviceControlStack+0x827
STACK_COMMAND: kb
FOLLOWUP_IP:
RDPWD!memcpy+1d9
fffff880`053dc0c9 668901          mov     word ptr [rcx],ax
SYMBOL_STACK_INDEX: 3
SYMBOL_NAME: RDPWD!memcpy+1d9
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: RDPWD
IMAGE_NAME: RDPWD.SYS
DEBUG_FLR_IMAGE_TIMESTAMP: 4ce7ab45
FAILURE_BUCKET_ID: X64_0x50_VRF_RDPWD!memcpy+1d9
BUCKET_ID: X64_0x50_VRF_RDPWD!memcpy+1d9
Followup: MachineOwner
Bug Check Code 0x50:http://msdn.microsoft.com/en-us/library/windows/hardware/ff559023%28v=vs.85%29.aspx
Please start by that:
Update all possible drivers
Uninstall all unused programs
Disable all security softwares you have
Run chkdsk /r /f and sfc /scannow
Run memtest86+ to check if all is okay with your RAM. If an error was detected then replace the faulty RAM or contact your manufacturer Technical Support
If this does not help then upload MEMORY.DMP file (You can zip it and divide it using 7-ZIP) using Microsoft Skydrive and post a link here.
You can also contact Microsoft CSS for assistance.
This
posting is provided "AS IS" with no warranties or guarantees , and confers no rights.
Microsoft
Student Partner 2010 / 2011
Microsoft
Certified Professional
Microsoft
Certified Systems Administrator: Security
Microsoft
Certified Systems Engineer: Security
Microsoft
Certified Technology Specialist: Windows Server 2008 Active Directory, Configuration
Microsoft
Certified Technology Specialist: Windows Server 2008 Network Infrastructure, Configuration
Microsoft
Certified Technology Specialist: Windows Server 2008 Applications Infrastructure, Configuration
Microsoft
Certified Technology Specialist: Windows 7, Configuring
Microsoft
Certified Technology Specialist: Designing and Providing Volume Licensing Solutions to Large Organizations
Microsoft
Certified IT Professional: Enterprise Administrator
Microsoft Certified IT Professional: Server Administrator
Microsoft Certified Trainer

Does installing Desktop Experience on Windows Server 2008 R2 SP1 slow down the server / increase processor usage?

Similar Messages

Maybe you are looking for