Does IOS firewall support HTTPS websense filtering

I have been looking for information on filtering HTTPS traffic using the iOS firewall (zone-based firewall) but cannot find any information. I also recieve the message that https is not supported on my router when I try to configure it.

Hi,
The following Q&A should answer most of your questions about websense support, including supported platforms and version numbers:
http://www.cisco.com/en/US/products/ps6643/products_qanda_item0900aecd804abb06.shtml
HTH
Andrew.

Similar Messages

  • Does iOS 7 Support Apps for Older Versions of iOS?

    Does iOS 7 support apps for older versions of iOS? This is my first big iOS upgrade so I wanted to be sure about this.

    Which is why I said "should" rather than "will". As there are no absolutes, I'm pretty sure there will be an app somewhere that will not run or have issues until its updated to the new iOS.
    With that said for the most part there "should" be no issues updating to a new iOS version related to having older unupdated apps, but its still possible that there can be.

  • Does ios 6 support edge network

    does ios 6 support edge network?

    I only have edge in my home. I was aware that EDGE is going bye bye, eventually. But after update to my phone on att i cannot pick up EDGE for data use. Voice works, only data is an issue. Thanks.

  • Does iOS 6 support POP email account?

    Does iOS 6 support using POP email accounts?  And if so, how do I set one up?

    Did go to Charter.net and went looking for assistance. Surprise! The answer was right there waiting for me, sorta. Looked under Support > Mobile Email Settings. Voila !
    I got the account to load on the iPhone 3Gs using iOS 6.  Had to change the settings to be "mobile.charter.net" and it is an IMAP account now.
    How strange.
    Thanks for all the helpful folks.

  • Does ios 7 support ics attachments?

    Ever since I downloades ios 7, I cannot download ics invitations from outlook.  Does ios 7 support ics attachments?

    Here's a workaround that's worked very well for me, which is based on the fact that the gmail app can handle outlook invites:
    1. Create a rule that sends a copy of all invitation requests to your gmail account
    2. Generate a link to your gmail calendar to be used for sharing
    3. Use that link to add a calendar to your iCloud account, which will sync with your gmail calendar
    4. Open your calendar invite from the gmail app. When you accept the invite it will notify the sender, the event will be added to your gmail calendar and then automatically be added to your IOS calendar.
    Once setup properly it works very smoothly. Hope that helps.

  • Does iOS 8 support multi-touch iBooks?

    Does iOS 8 support multi-touch iBooks?

    The apps still function, you lose a feature of synchronization that those with newer devices can use. That is part of progress.

  • Does iOS 5 support iPod Touch3 (16G)?

    Does iOS 5 support iPod Touch3 (16G)?

    You really have a 2G iPod and that goes only to iOS 4.2.1.  3G iPods were only made in 32 and 64 GB capacities.  Sorry.
    Identifying iPod models

  • Does Weblogic 10 supports HTTP/1.0..?

    Hi,
    My application contains an executable client. This client when invoked calls a servlet in the server. This application is working fine in weblogic 6.1 sp3 now. Iam trying to migrate this application to weblogic 10. However, when I invoke the executable client, its not reaching the servlet. Then I found the following logged in the access logs.
    "152.67.221.214 - - [06/Sep/2007:22:47:09 -0700] "POST /invoke/wm.server/connect HTTP/1.0" 401 1518"
    Note: I dont have the source code of the executable client..
    My doubts:
    Does weblogic supports HTTP/1.0...?
    how to make this work without having the control over the client..?
    Can we do something in server to make this work..?
    Its evident from the access log, that the request is unauthorized...how to avoid with without touching the client..?
    FYI, Its working fine in weblogic 6.1 sp3. Below is the log recorded in weblogic 6.1 sp3 access log.
    152.67.221.214 - - [06/Sep/2007:01:29:50 -0800] "POST http://appstg01:7031/invoke/wm.server/connect HTTP/1.0" 200 22
    How to make this work in weblogic 10. I can modify only the servlet and not the executable client.
    Thanks in advance.
    --vinodh                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                           

    I understand that HTTP version has nothing to do with 401 code. Please let me know is there any way that we can avoid this without touching the client. Because the cleint is a executable to which we dont have access. We still have command over Weblogic server and servlet.
              Thnks.

  • Does Siebel adapter support HTTPS?

    I am looking through a tutorial on installing and configuring Siebel adapter. It says that the adapter supports HTTP, FTP, and MQSeries. Does it support HTTP/S as well?
    If so, can you point me to documentation for implementing HTTP/S w/ Siebel adapter.
    Thanks,
    Chris

    I don't believe Siebel adapter supports HTTP/S. I researched, but came up with nothing.

  • Does IOS 6 support flash?

    Just wondering of the new IOS will support flash for the IPHONE 5

    Puffin, Photon, iSwifter, Skyfire.
    They are all available in the App Store.

  • Does iOS 6 support QuickTime videos?

    I can not watch any QuickTime videos since updating to iOS 6.

    I had the same problem - found a great site that suggested i downgrade my quick time player. now it works perfectly - give them 5 stars for solving the latest ios 6 issue
    http://imagine-create-inspire.com/2012/09/29/ios6-video-encoding-issue-solution/

  • Does iOS 6 supports iPhone 3GS?????

    Please let me know if anyone is using iOS 6 in iPhone 3GS , I heared that it does not works properly or have some issue like Stucked to itunes an all.
    Thanks for your comments an suggestions in advance.

    Read here - an independent review
    http://www.gottabemobile.com/2012/09/25/ios-6-on-iphone-3gs-final-impressions-an d-performance/

  • Does Flex HttpService support https with client authentication

    Hi,
    We have a set of backend services available over https with client auth (cert based). We need to use mxml HttpService to access these backend services. Does HttpService support ssl with client auth?
    Another question is, for Https does flex share the browser keystore and certstore or uses its own?
    Thanks,
    Debashis

    Yes , a flex HTTPService can access services on https://.  But if I remember correctly , to use an https:// service , the swf has to be served on an https.  Example ,
    Served from https:// ... --> Can access https:// ...
    Served from https:// ... --> Can acess https:// ...
    Served from https:// ... --> CANNOT access https:// ...
    Served from https:// ... --> CANNOT access https:// ...
    Since Flex has the browser do the connecting , the browser handles the keystore stuff , not Flex. I think.

  • HT4980 Does IOS 6 support Khmer font unicode? (Cambodia)

    Hello everyone.
    Sofar, we are waiting for Khmer font in font list but,it still unavilable until now.
    Does Khmer font is being added  to IOS 6?
    I hope that Khmer font will be add on IOS 6.
    Thank for help.

    For Apple to see your hope, you should repeat it here:
    http://www.apple.com/feedback/ipad.html

  • Does iOS 5 support streaming from iTunes Match?

    Hi everyone,
    I'm considering signing up for iTunes Match,  I just have a question about the way it works in iOS 5.
    I have a 16GB iPhone with iOS 5, and the reason I'm wanting a cloud service is because I can't fit my music library on the iPhone itself, so I'd like to be able to stream it.
    My question is, does iTunes Match allow me to stream music on the iPhone using iOS 5, or is streaming only a feature for iOS 6 devices? It would rather defeat the point of getting iTunes Match if I have to download each song before listening, as obviously that's no better than just syncing with iTunes.
    Thanks in advance.

    In iOS 5 all music is downloaded to permanent storage when you listen to it. It is similar in iOS 6 except the "streamed" songs are not store in permanent memory on the iOS device.

Maybe you are looking for

  • How can I delete my iTunes account on my macbook pro.  I want to give my computer to someone else

    Hi I have just bought a new mac book and have migrated everything accross.  I want to delete my itunes account so my husband can put his itunes on the computer.  I have deauthorised the computer but my music etc is still say there.  Any ideas? BW Sar

  • How do I easily transfer data from Palm Desktop to iCal and Address Book?

    Hello, How do I easily transfer data from Palm Desktop to iCal and Address Book? I have a Palm Tungsten E handheld which just died. Luckily, all my data is backed-up on my Palm Desktop V4.2.1. I just bought an iPod-Touch, so I would like to easily tr

  • Still no way to scroll iframes?

    Hi, I need to embed a WordPress blog into my website But the iPad, which is the target doesn't allow scrolling within the blog, since it's an iFrame or object. No, two fingers or one finger doesn't scroll the content within an iFrame or object placeh

  • ECM with Digital Signature

    Hi PP Gurus, Can anybody guide me about how to configure Digital Signature for ECR - ECO? I need to give R/3 UserID and Password for each step of ECR - ECO like for checking ECR - Engg Head Approving ECR - Quality Head Converting ECR - Production Hea

  • Vista 32bit driver won't install on Vista 32bit, but older XP driver wil

    So I keep getting this error, http://i29.photobucket.com/albums/p234/Spoudazo/Xfi_Vistaissue.jpg It's weird, as I can install older drivers in Vista, just not Vista drivers. Oh the irony! Any ideas? I don't have the driver for the onboard sound insta