Does IPad have a standard jack for earbuds?

I received a new IPad for Christmas. 32G with WiFi. Can you use any standard earbud/headphone jack with it, because when I try to use my earbuds from my IPod or headphones from a portable c/d player that I have, I get no sound from the earpieces and can still hear the sound from the IPad speakers.....?

Moeski0000 wrote:
Philly, my case gives me ample room to insert the Jack. After hearing that it does take a standard size jack, I tried using more pressure when inserting it, and it finally popped into place. I knew then that in my previous attempts, I didn't have the jack inserted all the way. I just didn't want to force it if I was using the wrong size jack. Thanks again for your help. Earbuds worked!
I know the feeling. I'm usually squeamish about pushing real hard on something that small. Glad that the issue is resolved.

Similar Messages

Does iPad have virus protection when using E mails?

Does iPad have virus protection when sending or receiving e mails?

You can purchase an email attachment virus checker from the app store, but there is no means for an attachment you receive to infect your iPad. If you decide to by the app I refenced be sure to closely read the app description and some reviews.

The security database on the server does not have a computer account for this workstation trust relationship

When I try to log on to my DC it says "The security database on the server does not have a computer account for this workstation trust relationship". It won't let me log on. I installed another server server 2012r2 (its virtual )
and I can get to ADSI edit.
I think what happened was I had a pc that could not connect without unplugging the network cable. So I found this fix
FIX: “The security database on the server does not have a computer account for this workstation trust relationship”2032011
I’ve seen a lot of solutions, or suggestions rather, with regard to the error in the title of this post. In my experience, the problem can almost always be resolved without extra domain add/removes and reboots, which is the most prevalent solution I have
seen around. Usually, this issue is due to a mismatch between attributes of the computer account in Active Directory and those values on the system itself. Here are the steps I take to fix this issue when it crops up:
Open up Active Directory Users & Computers pointed to the domain the computer account resides in
From the “View” pull-down menu, make sure that “Advanced Features” is checked
Navigate to the part of your organizational unit (OU) structure where the computer account for this server resides
Open the Properties for the computer object
Choose the “Attribute Editor” tab on the Properties dialog box
Check the Attributes dNSHostName & servicePrincipalName – anywhere that a fully qualified hostname is specified (e.g. myserver.mydomainname.com), make sure that the entry matches the hostname
you have configured when you go here on your server: Start -> Computer -> Right-Click, Properties -> Change Settings (under “Computer name, domain… settings”) -> Full Computer Name
As an example, for a fictitious W2K8 R2 server whose Full Computer Name is “srv1.mydomainname.com”, these attribute/value pairs should be in Active Directory:
dNSHostName:
srv1.mydomainname.com
servicePrincipalName:
HOST/SRV1
HOST/srv1.mydomainname.com
RestrictedKrbHost/SRV1
RestrictedKrbHost/srv1.mydomainname.com
TERMSRV/SRV1
TERMSRV/srv1.mydomainname.com"
Not reading it carefully I add a computer with the same name as the pc having the issue and followed the above. The problem is that I did not notice that the spn did not want the name of my server (serv1) but the name of the trouble
pc.
dcdiag output
PS C:\Users\administrator.TOM> dcdiag.exe
Directory Server Diagnosis
Performing initial setup:
Trying to find home server...
***Error: DC3 is not a Directory Server. Must specify /s:<Directory Server> or /n:<Naming Context> or nothing to
use the local machine.
ERROR: Could not find home server.
PS C:\Users\administrator.TOM> dcdiag.exe /s:DC2
Directory Server Diagnosis
Performing initial setup:
* Identified AD Forest.
Done gathering initial info.
Doing initial required tests
Testing server: Default-First-Site\DC2
Starting test: Connectivity
The host 9e0dca7a-d017-445a-b354-adee5ff53d48._msdcs.TOM could not be resolved to an IP address. Check the DN
server, DHCP, server name, etc.
Neither the the server name (DC2.TOM) nor the Guid DNS name (9e0dca7a-d017-445a-b354-adee5ff53d48._msdcs.TOM)
could be resolved by DNS. Check that the server is up and is registered correctly with the DNS server.
Got error while checking LDAP and RPC connectivity. Please check your firewall settings.
......................... DC2 failed test Connectivity
Doing primary tests
Testing server: Default-First-Site\DC2
Skipping all tests, because server DC2 is not responding to directory service requests.
Running partition tests on : ForestDnsZones
Starting test: CheckSDRefDom
......................... ForestDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... ForestDnsZones passed test CrossRefValidation
Running partition tests on : DomainDnsZones
Starting test: CheckSDRefDom
......................... DomainDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... DomainDnsZones passed test CrossRefValidation
Running partition tests on : Schema
Starting test: CheckSDRefDom
......................... Schema passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Schema passed test CrossRefValidation
Running partition tests on : Configuration
Starting test: CheckSDRefDom
......................... Configuration passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Configuration passed test CrossRefValidation
Running partition tests on : TOM
Starting test: CheckSDRefDom
......................... TOM passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... TOM passed test CrossRefValidation
Running enterprise tests on : TOM
Starting test: LocatorCheck
......................... TOM passed test LocatorCheck
Starting test: Intersite
......................... TOM passed test Intersite
PS C:\Users\administrator.TOM> regsvr32 schmmgmt.dll
PS C:\Users\administrator.TOM> netdig /fix
netdig : The term 'netdig' is not recognized as the name of a cmdlet, function, script file, or operable program.
Check the spelling of the name, or if a path was included, verify that the path is correct and try again.
At line:1 char:1
+ netdig /fix
+ ~~~~~~
+ CategoryInfo : ObjectNotFound: (netdig:String) [], CommandNotFoundException
+ FullyQualifiedErrorId : CommandNotFoundException
PS C:\Users\administrator.TOM> Setup /PrepareSchema
Setup : The term 'Setup' is not recognized as the name of a cmdlet, function, script file, or operable program. Check
the spelling of the name, or if a path was included, verify that the path is correct and try again.
At line:1 char:1
+ Setup /PrepareSchema
+ ~~~~~
+ CategoryInfo : ObjectNotFound: (Setup:String) [], CommandNotFoundException
+ FullyQualifiedErrorId : CommandNotFoundException
PS C:\Users\administrator.TOM> netdiag /test
netdiag : The term 'netdiag' is not recognized as the name of a cmdlet, function, script file, or operable program.
Check the spelling of the name, or if a path was included, verify that the path is correct and try again.
At line:1 char:1
+ netdiag /test
+ ~~~~~~~
+ CategoryInfo : ObjectNotFound: (netdiag:String) [], CommandNotFoundException
+ FullyQualifiedErrorId : CommandNotFoundException
PS C:\Users\administrator.TOM> nslooup
nslooup : The term 'nslooup' is not recognized as the name of a cmdlet, function, script file, or operable program.
Check the spelling of the name, or if a path was included, verify that the path is correct and try again.
At line:1 char:1
+ nslooup
+ ~~~~~~~
+ CategoryInfo : ObjectNotFound: (nslooup:String) [], CommandNotFoundException
+ FullyQualifiedErrorId : CommandNotFoundException
PS C:\Users\administrator.TOM>

Ok fixed.
At a elevated cmd prompt run ;
C:\Users\administrator.TOM>setspn -x
As you can see the DC serv1 had duplicate SPNs.
Checking domain DC=TOM
Processing entry 1
HOST/serv1.TOM is registered on these accounts:
CN=SERV1,OU=Domain Controllers,DC=TOM
CN=C00049,CN=Computers,DC=TOM
{14E52635-0A95-4a5c-BDB1-E0D0C703B6C8}/TOWN-HBWJ29ZOQC is registered on these ac
counts:
CN=Administrator,CN=Users,DC=TOM
CN=TOWN-HBWJ29ZOQC,CN=Computers,DC=TOM
{14E52635-0A95-4a5c-BDB1-E0D0C703B6C8}/town-hbwj29zoqc.TOM is registered on thes
e accounts:
CN=Administrator,CN=Users,DC=TOM
CN=TOWN-HBWJ29ZOQC,CN=Computers,DC=TOM
RestrictedKrbHost/serv1 is registered on these accounts:
CN=C00049,CN=Computers,DC=TOM
CN=SERV1,OU=Domain Controllers,DC=TOM
RestrictedKrbHost/serv1.TOM is registered on these accounts:
CN=C00049,CN=Computers,DC=TOM
CN=SERV1,OU=Domain Controllers,DC=TOM
found 5 groups of duplicate SPNs.
Went to the computers OU and changed computer c00049 to the correct SPN. Now I have a new issues, I'll start a new thread.

I have a mixer which i was using with my pc and now i bought a new macbook and it have only one jack for headphones and to use mixers i need jack for microphone too so what should i do

i have a mixer which i was using with my pc and now i bought a new macbook and it have only one jack for headphones and to use mixers i need jack for microphone too so what should i do

You need to get headset splitter adapter.
http://www.startech.com/Cables/Audio-Video/Audio-Cables/35mm-4-Position-to-2x-3- Position-35mm-Headset-Splitter-Adapter-Male-to-Female~MUYHSMFF

I have a digital voice recorder with a 3.5mm mic and headphone jack and want to transfer some recorded lecture to my mac book pro. The mac book does not have 3.5mm jacks. Does anyone know if a jack to USB converter would work?

I have a digital voice recorder with a 3.5mm microphone and headphone jack and want to transfer some recorded lectures to my mac book pro. The mac book does not have 3.5mm jacks. Does anyone know if a jack to USB converter would work?

Is there a pattern to the time of day or other detail that may be
traced back to a OS X system cause of this odd phenomenon?
Are there any copies of system files on any of the attached USB
external drives? Any libraries, such as iTunes, iPhoto, etc?
Once the drives are indexed by Spotlight, are their permissions
ignored by the OS X? Content, if neutral, should not affect the
wake or sleep cycle; especially if they're ignored by the OS X.
Could there be a bad cable or other component? If so that would
be a difficult process of elimination to detect it. Usually replacing
most suspect components in the USB stream (external to Macs)
is a rote way to mechanically test that idea; & not 100% sure.
Does the equipment all have a good ground to the utility or house
electrical field? An intermittent ground may affect more than sleep.
Hard to say at this point. Maybe a late-night talk radio guru on
remote viewing could peer into your situation and sleuth it out?
Sorry to have run out of ideas, but the process must be electrical
& mechanical to some extent. - Or perhaps odd software inspired.
Do you have any phone-home spyware items inside, just jumping
at the chance to spill your information? Little Snitch may help.
PS: Perhaps the computer needs to go into Apple & have a genius
or product specialist at AASP test the unit thoroughly... BlueTooth?
see:
https://www.google.com/?gws_rd=ssl#q=Wake+reason:+XHC1
Good luck & happy computing!
edited 2x

I NEED TO KNOW IF IN SAP WE HAVE THESE STANDARD REPORTS FOR PP Division.

i NEED TO KNOW IF IN SAP WE HAVE THESE STANDARD REPORTS FOR PP Division. OR I NEED TO CREATE BI/ABAP REPORTS
PLEASE HELP.
Please tell me how to check in sap these reports exists if not on functional report how to give fields and table name etc.............i am pretty new and i need to submit this work by monday its matter of survivial please please help
1. lOSS ORDER REPORT as PER GAAP
2. wWORK IN PROCESS SUMMARY (FIELDS ARE JOB NUMBER,ORDER TYPE,CUSTOMER NAME, NET SELLING PRICE,MATERIAL,MATERIAL OVERHEAD,labor hrs,labor, labor ovehead, total)
3. 1099 REPORT (VENDOR,VENDOR CODE,DISCRIPTION AND VENDOR AMOUNT)

If you are collecting your responses outside of Formcentral your forms will continue to work past June. This can be done by email or the Acrobat Pro mechanism. If your data is being collected in a Formscentral response table then it will cease working in July.
Andrew

File transport does not have read/write privileges for receive location???

Hi all.
I try to read an EDI-file from a file location.
In configured the receive location but when I enable it I get an error message in the log saying:
File transport does not have read/write privileges for receive location "Location" (Event ID: 7183)
The location is correct (I used the browse option) and the folder is shared with all users (full access for everybody).
How can I get rid of this error

There can be many reasons for this error. First of all try the KB article http://support.microsoft.com/kb/888498 . Then try the solution on this link http://bluebiztalk.blogspot.com/2008/05/file-transport-does-not-have-readwrite.htmlAbdul Rafay
http://abdulrafaysbiztalk.wordpress.com/
Please mark this as answer if it helps

I have bought a new laptop which does not have a Disk Drive for CDs. How can I load my Acrobat Pro X on to this computer

I have bought a new laptop which does not have a Disk Drive for CDs. How can I load my Acrobat Pro X on to this computer

Download it from https://helpx.adobe.com/acrobat/kb/acrobat-downloads.html

Does anybody have a WLST script for step-by-step cluster restart?

Does anybody have a WLST script for step-by-step "smart" cluster restart?

Dear SAM,
are you looking for exchange 2013 installation. Please follow below link. I have done the same scenario as yours
1. install first VM - 2012
2. Static IP / loopback as primary DNS
3. install ADDS /DNS (forwarder to ISP)
4. install second VM - Static IP again
5. DNS of second VM to be the IP of first VM
6. this will join the domain
7. installation of exchange will be simple, configuration from this link : http://www.techieshelp.com/exchange-2013-step-by-step-configuration/
MARK AS USEFUL/ANSWER IF IT DID
Thanks
Happiness Always
Jatin

Does ipad have bluetooth to be able to connect iphone internet to the ipad?

does ipad have bluetooth that will allow the iphone's internet to be used by the ipad?

Yes.

Does ipad have an activity log? I want to report on when it was on and being used?

Does ipad have an activity log? I want to report on when it was on and being used?

Hi, No but there are many 3rd party apps in the app store but it all depends what activity you need to monitor or log

Does anyone have a good link for images I can access for my web development work. I have Adobe Creative SUite 5.5

Does anyone have a good link for images I can access for my web development work. I have Adobe Creative Suite 5.5

In short, NO.
I was hoping that the 7.4.1 update would allow it to work, but it has caused more problems than it is worth.If you do actually get it to work you will see the TC in finder (under Shared) when connected to the internet outside of your home network. What I have found though is that the 7.4.1 firmware update has made using the internet at home almost impossible.
I have tried Hamachi but it is not reliable.
I have settled with Dropbox so my files are synced between my home machine and laptop.

Does Cisco have any demo license for VCS?

For a study way, I would like to test VCS at my network for a while.
Does Cisco have any demo license for VCS?

Hi
I believe you get very limited (1x traversal/1x non traversal) licenses if you just install the software.
Also see this thread; you may get a time limited demo license from the licensing team if you ask nicely.
https://supportforums.cisco.com/discussion/11555961/home-lab-vcs-and-tms#3687717
Aaron

Does dreamweaver have drag & drop templates for creating online shopping websites?

Does dreamweaver have drag & drop templates for creating online shopping websites?

How many products are you planning to sell?
Do you need a lot of varying versions like colors, sizes etc. ?
Paypal offers a very simple payment gateway, without your needing to get involved with learning server side Scripting and and databases. Their tech support is superb.
https://www.paypal.com/us/webapps/mpp/accept-payments-online

My iPhone 5 has numerous problems and I want to take it to an apple store to get a replacement but it is under my dads name... Does he have to be there for me to replace it?

Hi guys
I recently just bought a new iPhone 5 and it is already having some problems like not receiving messages when it has told me I've received one, the side button is getting really stiff and hard to change to silent and it always goes into SOS only mode...
I want to go to the apple store and get a replacement but it is under my dads name.. Does he have to be there for me to replace it?? Thanks

I'd suggest you call the Apple Store and ask to make sure. They may insist on your father being present since the iPhone was purchased by him, but quite probably they won't care. They usually don't check ownership of the iPhone since many are purchased as gifts or sold to someone else.
Regards.

Does IPad have a standard jack for earbuds?

Similar Messages

Maybe you are looking for