Does iPhone do Video Out via video cables?

I can't find any reference to this in the iPhone user guide, so I'm guessing it can't, but I thought I'd ask here.
Can iPhone send video out to an external TV using the iPod Video Connection Cable?

This might help.
http://www.cellphoneshop.net/auviacaforap.html?ovchn=INK&ovcpn=sitematch&ovcrn=c ellphone&ovtac=PIB

Similar Messages

  • I use Keynote on iPad2. Video out via composite AV cable, audio out through earphone socket. If I plug into the earphone socket first, then the AV cable - no sound. AV first, then earphone - sound. Anyone know why?

    I use Keynote on iPad2. Video out via composite AV cable, audio out through earphone socket. If I plug into the earphone socket first, then plug in the AV cable - no sound. AV first, then earphone - sound. Anyone know why?

    My daughter has had her Razr for about 9 months now.  About two weeks ago she picked up her phone in the morning on her way to school when she noticed two cracks, both starting at the camera lens. One goes completely to the bottom and the other goes sharply to the side. She has never dropped it and me and my husband went over it with a fine tooth comb. We looked under a magnifying glass and could no find any reason for the glass to crack. Not one ding, scratch or bang. Our daughter really takes good care of her stuff, but we still wanted to make sure before we sent it in for repairs. Well we did and we got a reply from Motorola with a picture of the cracks saying this was customer abuse and that it is not covered under warranty. Even though they did not find any physical damage to back it up. Well I e-mailed them back and told them I did a little research and found pages of people having the same problems. Well I did not hear from them until I received a notice from Fed Ex that they were sending the phone back. NOT FIXED!!! I went to look up why and guess what there is no case open any more for the phone. It has been wiped clean. I put in the RMA # it comes back not found, I put in the ID #, the SN# and all comes back not found. Yet a day earlier all the info was there. I know there is a lot more people like me and all of you, but they just don't want to be bothered so they pay to have it fix, just to have it do it again. Unless they have found the problem and only fixing it on a customer pay only set up. I am furious and will not be recommending this phone to anyone. And to think I was considering this phone for my next up grade! NOT!!!!

  • Iphone is being charged via USB Cable to HP Computer; is the HP/ or any computer able to interrogate the iphone?

    My iphone is being charged via USB Cable to HP Computer; is the HP/ or any computer able to interrogate the iphone?

    Interrogate?  What for?  Was the phone arrested for something or a suspect in some crime?

  • Does 7.0.2 allow the video out via AV composite cable?

    Hello,
    I use the 30 pin to AV Composite cable a lot for work.
    I teach, so I play movies and TV shows via this cable.
    The TV sets are very simple LCD 6 year old TVs, so I can not rely on AirPlay.
    Can anyone tell me if 7.0.2 is ok with AV composite cable?
    Thanks in advance.
    Sam

    This support article will tell you what dock works with what phone & what cables you need to make it work.
    http://support.apple.com/kb/HT1454

  • Ios podcast utility that supports video out through composite cable.

    Hi everyone,
    I'm watching some video podcasts (you're right - MacBreak Weekly!) in my car while staying in traffic jams. And I use original Apple composite video cable to send video to the in-dash screen of my Nissan.
    There have been some podcasts downloaders in App Store, like Instacast, Downcast, Podcaster. But none of them are able to send video out of iPhone.
    If anybody seen one that is able to do that, I'd appreciate a link dropped over here.
    Thanks a lot,
    Egor.

    try rebooting the iphone
    my iphone4 works just fine with my composite and component cables I'm using latests ios version
    but mind you it only works with tvout ables apps like youtube it don't support mirror

  • Sending video OUT via Firewire to my Camcorder FROM my computer?

    Hi all!
    Can I send video OUT from my comp. to my camcorder via Firewire. I have a camcorder that has Passthrough to use it as a bridge which I have used to hook up a vcr with. But Im not sure if I can send video OUT to the camcorder and record it on the tape? Any help would be great!
    Thanks, Retha
    iMac G5 & iBook Dual USB G3/Airport   Mac OS X (10.4.8)   iLife 6 & QT Pro
    iMac G5 & iBook Dual USB G3/Airport   Mac OS X (10.4.8)   iLife 6 & QT Pro
    iMac G5 & iBook Dual USB G3/Airport   Mac OS X (10.4.8)   iLife 6 & QT Pro

    Hi Retha!
    Yes, you should be able to do this. Use the Export command in the File menu of iMovie, and you will see that Camera is one of the options.

  • Video output via composite cable & video output on iPad screen

    Is it possible to have the video play on the iPad simultaneously as it outputs to composite cable? Whenever I play a video with the composite cable plugged in, the iPad displays a screen shot of a random video (same screen shot every single time). It's a complete mystery to me. Any ideas?

    It sounds normal to me. The composite and AVGA out on the iPad do not mirror the the iPad's display as you found out. However, there may be some apps that will show video on both screens.

  • Send Video Out via Firewire 800?

    I have a macbook pro that has a firewire 800 port on it
    i also have a video switcher for video productions that takes a firewire 400 input as a video source
    i own a firewire 800 to 400 cable.
    is there any way to get video to send out of the macbook pro to go into the video switcher?
    when i connect the cables, nothing happens.
    please help!

    I had forgotten I'd posted this and I need to make a clarification.
    At the time of this posting, I'd been assured by Blackmagic Designs that Color would preview externally through their Intensity Pro card although in 8-bit video. Since the time of this posting and upon further query with BM tech support, I was told the Intensity Pro could not be used in this function.
    Sorry if there has been any confusion caused by my statement.
    Zeb

  • Video out via firewire

    Is color capable of outputing preview video through my DVCam deck via firewire? The option in the video out preferences seems to be grey out as are the other options in there.

    I had forgotten I'd posted this and I need to make a clarification.
    At the time of this posting, I'd been assured by Blackmagic Designs that Color would preview externally through their Intensity Pro card although in 8-bit video. Since the time of this posting and upon further query with BM tech support, I was told the Intensity Pro could not be used in this function.
    Sorry if there has been any confusion caused by my statement.
    Zeb

  • Does iPhone 4S Camera app support video viewfinder streaming?

    Video Mirroring of the iPhone 4S screen is an awesome possibility to improve the experience of recording a sports event such as an hour long hockey game. There are a number of battery powered camera top displays in the size range of 7" to 10" that take HDMI input , such as the Lilliput 7-inch LCD monitor with HDMI input for $165 on Amazon. Does the iPhone 4S Camera app support video streaming so that a decent sized view finder could be used as an external, larger viewfinder while the video camera is in use, or do I have to use an iPad 2, or, better yet, the iPad 3 when ever it is released?

    Uh, could you tip us too, so we can be spared the call to Apple support - not that it's in general bad, the support. Just easier to DIY.
    Its all the apps connected to the camera for me. Hipstamatic, Camera+ and Camera. If I make a reset and star the phone again I can use these apps. But after some use - impossible. It's like ... when the get the photo back from iOS7, it happens. That's my feeling, anyway.
    Thanks
    Jakob

  • No video out via fireware in premiere cs4

    how to have video output via FireWire premiere in CS4. In CS3 there are no problems

    Harm Millaard
    yes, my audio settings are correct. I have no audio and no video output for Firewire, when I play the timeline. My VCR only receive a signal, when I use export to tape. In Premiere CS3, I could monitor through my VCR, which will be in CS4 does not have this function, as occurs with the matrox rtx2, with respect to RTX100. "The play only works for the VCR, when used export to tape ????????????

  • Video out via AV Dock

    I have an older iPod universal dock that has a S-Video cable outlet, as well as the 'normal' 3.5mm line-out and connector. There is no IR window (sensor) on the front, therefore, I presume that a standard Apple Remote will not work.
    My questions are: 1) Is there a User Guide (manual) for this device? The copyright on the bottom says Apple 2003. I hook up an S-Video cable to it and my HDMI TV, but I cannot get a movie to play from my iPhone 3GS. 2) Will this unit work with my iPhone 3GS?

    This support article will tell you what dock works with what phone & what cables you need to make it work.
    http://support.apple.com/kb/HT1454

  • Video Out via RCA....?

    I have a small portable DVD player that I'm thinking of trying to use a "mini monitor"...what would happen if I use this adapter
    http://ak.buy.com/dbassets/prod_lrgimages/358/208017358.jpg
    with my Apple DVI to VGA adapter and plugged it into my DVD video in-port...??
    Would my iMac even detect the DVD player via RCA...?

    den.thed wrote:
    Hi psa_mac
    The Late 2006 2.16MHz Intel iMac uses a Mini DVI adapter and I'm not sure about that adapter, but the Apple Mini-DVI to Video Adapter has both S-Video and Composite outputs.
    http://store.apple.com/us/product/M9319G/A
    It should work like a TV if the DVD player has a selectable input port?
    Dennis
    I actually have one of those Apple Mini-DVI to Video Adapter...won't fit my iMac but it does fit my iBook...so I tried it (via RCA) and the iBook did not detect the DVD player....so I'm not sure if Apple has a "mini" DVI to RCA for the iMac since the iMac and iBook ports are different.

  • Fcp 5.12 - no video out via fw ?

    Here's a weird one - everything appears fine.
    Had no problems on install -
    Logged and Captured clips - dv pal via fw.
    Video showing on external monitor when capturing - all good.
    Drop clip into tl - nothing showing on external ?
    Yes - External Video>All Frames is selected.
    Yes - did Refresh AV devices.
    Yes - Rebooted.
    Yes - checked in all the other nooks and crannies.
    Can't make video appear on my Pvm - Yet when in L&C everything works.
    Scratching the old scales here ...
    Going to have a try in another app - Motion and AE to see if it's an fcp thing, or QT ...
    edit: Okay - I'm getting nothing out in Motion or AE.
    Maybe it's a porked qt 7.13 install - I'll try trashing QT receipt and dl a freshie.

    Nope - she's plain busted as far as fw out for me.
    Dl'd and installed 7.1.3 again - nothing.
    Installed it also onto a backup of OS 10.4.6 and fcp 5.04 - no fw out !
    In fcp L&C yup - it works, device control and playback. The moment you close L&C - nothing. No communication.
    I tried SimpleVideo OutX and BTv Pro - nope.
    The dsr 11 is seen but nothing is going out the port.
    I have also tried going out fw 400 using the cardbus 400 port - nothing.

  • Connecting an iPhone to MacBook Pro via TRRS cable?

    Here is my idea.  I know this doesnt exist yet but let know know what you think.
    I have designed a TRRS cable (image attached) that my TRRS headphones can plug into, which is then plugged into the audio jack of my iphone and macbook pro.
    My idea here is that I wish to listen to music (via headphones) while on my macbook, however, I constantly get calls.  I dont want to remove my headphones or constantly need to unplug and replug in my headphone jack, so I figured the y-connector will solve this problem.
    Does anyone see a problem with how this might make my phone and MBP interact?
    Thanks

    Actually I am looking for a similar thing but 2 female TRRS and 1 male TRRS and saw your post while searching. I want to connect both my headphones and speaker system to my mac and still able to use volume control/mic etc on my earphones. The second female doesn't have to be TRRS but it will be easier to produce one with two TRRS females.
    About your idea, it's also nice. I didn't think about it before and I am just switching the earphones to my mac and iPhone. It would be nice to have such a thing. However I guess you will have some issues.
    I don't think your MBP and iPhone would interact during the calls since mic only take inputs. So when you are on call, MBP will ignore it unless you have activated the mic on MBP. But if you are using the mic on MBP, for instance, you are on a video conference on your mac and meanwhile got a phone call on iPhone then both devices will get your voice. This might not be a problem since you just want to listen to music on your mac.
    But the problem is, my guess, when you use volume control on your earphones both iPhone and mac will change the volume. You will probably have a big problem when using play/pause/skip function since the signal from the earphone will pass to both iPhone and MBP and both devices will play/pause/skip and their combinations.
    My suggestion is to add a switch on the mic channel. Then you can chose to use the mic/volume/play functions only on either iPhone or MBP. That would solve the problem.

Maybe you are looking for

  • Creating users in enterprise portals with CUA as userbase

    Hi All,    we are using CUA system for maintaining the users and we want this users to be used in enterprise portals. So while installing WebAs itself, we specified the connection details to this CUA system. then we installed portal and we were able

  • Micrsoft Outlook somtimes prompting for username and password

    hello All ,  I Have Exchange 2010 sp3 installed two mailbox servers & two HUB & CAS Servers  and Outlook sometimes  prompting for username and password . how can fix it . Thank you

  • Listboxes as file explorer

    Hi, I found the listboxes as file explorer example in LabView and it is perfect for my project. However the only issue I have is that it only goes up to the root directory.  There is no way of changing directories (i.e. A drive, F drive etc.). I was

  • OAF shared development environment, 3 continents

    I'm looking for some opinions on how to structure the OAF development environment for a small project, tight deadlines, and a few developers on 3 continents. We have about 15 OAF pages to develop. Vision DB test instance is in US. Two developers in I

  • Serial number for photoshop cs6

    i i got my adobe photoshop cs6 from my school admin,they gave me serial number but i lost now my trial is experied but i signed in to adobe id before to get my product serial number but i dont get any help from my adobe account what should i do?