Does Iphone support bluetooth file transfer,

will Iphone sync to a bluetooth USB dongal. for photo (jpg) transfer ?
  Mac OS X (10.3.9)  

No, it does not. The required OBEX [OBject EXchange] Bluetooth profile is either missing, defeated or intentionally not enabled.
It's hard to say why the decision was made not to include it, as the pressure not to do so is not typical of at&t historically. It is much more typical of the behavior Verizon has engaged in to protect its 5¢ per transfer GetItNow! offering.

Similar Messages

  • Does iphone support bluetooth MAP technology

    Does iphone support bluetooth MAP technology?
    I bought a 2015 Jeep Grand Cherokee using Uconnect and it won't read my text message out loud.

    iPhone does support the bluetooth MAP profile as long as it is iPhone 4 and later. Refer to article below for further supported profiles.
    iOS: Supported Bluetooth profiles - Apple Support
    The article also states that certain profiles have different responses to different devices and that is determined on both sides (the Jeep software and the iPhone). Depending on the software that Jeep is running it may have limited usability with the iPhone. Best thing to do is first, update the iPhone and see if that helps. If that does not work, remove the Jeep as a device from the Bluetooth Menu in the iPhone and re-add it. Third, get in contact with Jeep or uConnect to see if the iPhone is supported with the MAP profile. If it is, see if they can assist in getting it working correctly. A lot of car dealers will also help in getting it working.

  • Nokia lumia 610 ringtone,and bluetooth file transf...

    i have nokia 610 and i have donwloaded a ringtone from marketplace i mean song and i want to set it as my ringtone 
    what should i do in order to set that song as my ringing tone pls tell
    and more thing if i want to send any file to other mobile do i need a special software or anything like that 
    thank you
    Solved!
    Go to Solution.

    Once you have downloaded and saved the new ringtone, you can set it as your ringtone by going to Settings>Ringtones&Sounds>Ringtone, Scroll to the top because this is where you will find all your downloaded ringtone. Just select the one you want to use.
    Your Lumia 610 does not support bluetooth file transfer for the moment. However, this feature will be added with the next WP7.8 update which is due soon. In the mean time you can transfer files to other phones by using Skydrive or by emailing. 

  • Does the new IPhone support Bluetooth text messaging?

    Does the new iPhone support Bluetooth text messaging?

    You need to ask Siri to read you messages for you

  • Disable Bluetooth File Transfer - Windows 7

    How do I disable Bluetooth file transfer for Windows 7? I am planning to see if it can be done via Group Policy (custom adm or GPP) or by creating a power shell script.
    I read the existing questions here but its getting me nowhere. http://social.technet.microsoft.com/Forums/office/en-US/0a04b41b-05a8-4d7b-9ae0-212137cc4af7/restrict-bluetooth-file-transfer?forum=winserverGP
    http://social.technet.microsoft.com/Forums/office/en-US/578763f6-9c62-4900-915d-056354befb15/how-to-disable-bluetooth-file-transfers-via-group-policy?forum=winserverGP
    Thanks in advance.
    Dash

    Hi,
    For Bluetooth devices, try this :
    http://technet.microsoft.com/en-us/library/dd252791.aspx.
    If it doesn't work, You may also try to use GPP Services to disable the Bluetooth Support Service (BthServ).
    Kate Li
    TechNet Community Support

  • Bluetooth file transfer from Sharp GX29 mobile phone to iBook

    hello all,
    got a new sharp gx29 mobile phone.
    problem:
    cannot send files via bluetooth to my ibook.
    but can send from ibook to Sharp.
    when trying to send from phone, a dialog window opens on mac os x, asking whether accept or cancel the transfer.
    no matter how many times i click on accept, nothing happens, sometimes it hits it, and goes further to a transfer dialog window with the transfer progress bar, but it starts to transfer and stops at about 5-10%, and nothing happens.
    Any one has Sharp GX series and problems like me?
    I know that Sharp is not supported by isync, but that's not what I am trying to do (isync), just a normal file transfer.
    Thnx
    Tom

    I myself have missed the obvious many times so I'm going to ask.
    In System Preferences/Bluetooth/Sharing. Do you have: Bluetooth File Transfer and File Exchange checked???? Then make sure your settings in the pop up menus on the right are correct.
    If you have everything set properly in Bluetooth preferences on your iBook then you might try the Sharp web site for troubleshooting since you can't send files via Bluetooth to your iBook, not the other way around. Sounds like maybe your Sharp possibly has something blocked somewhere...
    Carolyn

  • Does iphone support Quick time

    Hi All,
    May I know does iphone support Quick time? Apparently I visited an website with Quick Time player and I am unable to view it.
    May I know is there any setting need to be done?
    Thanks and Regards
    Sok Kheng

    From Tech Specs Page
    http://www.apple.com/iphone/specs.html
    Video formats supported: H.264 video up to 720p, 30 frames per second, Main Profile level 3.1 with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; MPEG-4 video, up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Simple Profile with AAC-LC audio up to 160 Kbps per channel, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; Motion JPEG (M-JPEG) up to 35 Mbps, 1280 by 720 pixels, 30 frames per second, audio in ulaw, PCM stereo audio in .avi file format
    So it just has to be in the right format.

  • Does iphone supports blutooth sharing with non Apple devices?

    Does iphone support sharing with non Apple devices?

    For that matter, it doesn't support bluetooth sharing with Apple devices either... except app to app connections that are specifically coded to communicate directly.

  • HT204387 Does iOS support Bluetooth printing, any idea by when would that come out.

    Hi
    I am trying to print a receipt using bluetooth on an iPhone app, the printer is a Zebra printer QL 420 plus. I am unable to do so. The iOS documentation states Air Print as a method to print. Is that the only option that we have to print using iOS.
    This is urgent as I have a customer delivery.
    Rgds
    Raman

    No one would have any idea what Apple plans, unless they announse - which is very rare.
    Iphone does not support bluetooth printing.

  • How to fix file when it says, "Cannot open file " ". Adobe Indesign does not support the file format, a plug-in that supports the file may be missing, or file may be open in another application." It worked one second, I saved and closed the file, then tri

    How to fix file when it says, "Cannot open file " ". Adobe Indesign does not support the file format, a plug-in that supports the file may be missing, or file may be open in another application." It worked one second, I saved and closed the file, then tried to reopen and now it won't work. I am using Adobe InDesign CS5. It is the only version on my comp. I have tried opening on another comp & copying the file – same error comes up. PLEASE HELP

    First check the version of the document with Jongware's script "Identify.jsx" (ExtendScript/JavaScript).
    You can find it here:
    [Ann] Identify Your InDesign File
    If it is CS 5.5 or above, you need someone to open it in the version the script says and export an IDML representation from that. Another way would be to install a 30days version of CS6 or above (CC) and do it yourself.
    In regards of the script showing a result for InDesign files higher than CS6:
    CS7 = CC v9
    CS8 = CC v10 = CC-2014 or CC2014.1
    Uwe

  • Nokia E75 does not support sis files

    I've been trying to upgrade the Ovi maps on my E75, because navigation has kept me saying that I need to renew the license. I went to Nokia web site and found out that I need to upgrade Ovi maps in order to get the free navigation. I have a 202.12.01 firmware and I installed it once again when I had unsuccessfully tried to upgrade Ovi maps. I have Ovi maps v3.01 09wk44b01 (MW OpenGL LM MN) and Map version 0.1.24.114 (OpenBitLM 6.22.5). I've deleted all old maps and started to download new ones successfully over Nokia Ovi Suite. I've downloaded Nokia Ovi Suite and followed the instructions for downloading and installing the newest version of Ovi maps application (I suppose it must be newer than the one I have on now, because navigation still wants me to buy license, I guess it must be 3.03 or higher). I've tried it several times from the scratch, just to make sure I did it right. Of course I've also chosen the right E75 phone from the drop down menu and I downloaded the file nokia_maps_3.01_09wk44_b01_s60_3.2_lm_rom.sis. I double-clicked it and everything seems to be right, but when action on the phone should be required the installation guide says "Nokia E75 does not support sis files". From the sis file name I can only now see that I have this version already installed.
    Does this mean I can not use navigation for free on E75?
    Can anybody help me ASAP, because I need the navigation evey day very badly?

    I'v followed the directions of chanchan05 "Just uninstall the maps app, delete the folder and file I mentioned, then reboot your phone. Open the maps app, and it should recreate the qf file and cities folder in a version compatible to 3.03." on /t5/Maps-Navigation-and-GPS/Wasn-t-it-supposed-to-be-quot-Navigation-on-your-Nokia-Free/m-p/668305#M...
    Afterwards I installed the sis file you pointed me to and it worked. The maps on the phone were deleted, so I downloaded new ones over Nokia Ovi Suite and tried the navigation. Unfortunately it stills demands buying the licence for the navigation.
    I guess this is because the recommended sis file is v3.01 and not v3.03? Is that right?
    Any other solution?

  • IMAQ ClipboardToImage IMAQ Vision does not support the file type you specified.

    Hi.
    I have been trying out the inventeering INVENTvisionIMAQexample.vi. But i always encoutered
    an error in the INVENTvisionVFWcopy.vi of "IMAQ ClipboardToImage IMAQ Vision
    does not support the file type you specified." And the video window does not
    appear full size with real-time capture image. Does anyone encountered this problem as well? Please enlightened me. Thank you.

    What error it is throwing ? if you could attach the vi then it will be easy to find out the problem

  • Lightroom 3 does NOT support raw files for the  Canon Sureshot S95

    Have just bought the new Canon Sureshot S95
    after contacting Adobe support I am told Lightroom 3 does NOT support raw files for the
    Canon Sureshot S95.
    Come on Adobe.....please provide an update asap.

    (1) Well Boss I did what you said and used Canon DPP to convert to TIFFs. Choices are 8-bit TIFF or 16-bit TIFF - I chose 16-bit because part (90% part) of the reason for wanting to work in RAW is to keep the bit depth of teh original. On my EOS 40D it is supposedly 14 bits, which gives great scope to play with the levels & curves without seeing poster effects. If I choose 16 bit TIFF then each S95 image becomes a 70MB file, parallel to my JPEG and RAW.  Hardly a satisfactory solution.
    (I realise, however, that I don't actually know the bit depth of the S95 RAW file - anybody? ). 
    (2) SUGGESTION-  even if you are adding S95 support to the next update (which I dearly hope), be kinder to those with new cameras in general and allow LR to import JPEGs if it cannot import the RAWs (overriding if necessary the 'ignore JPEG' preference setting).  I am sure users with that preference would still prefer a JPEG than no picture at all!
    Since I discovered this compatibility problem, I switched the camera to record RAW+JPEG*. To my great irritation LR3 ignores the JPEGs even though it cannot load the RAWs.  So if I want to import from one supported camera (EOS40D) and one unsupported camera (S95) I have to keep going into preferences to switch on and off the 'ignore JPEG' function.
    JJ
    *  (this seems to be a setting that needs doing in the various different modes of the camera, by the way).

  • MS 2.1 'Does not support importing files containing tempo changes' message

    OK, so I've just loaded up the 2.1 upgrade and opened up a couple of existing concerts, and I get the following message:
    +File contains tempo changes+
    +One or more of the files you are importing contains tempo change markers. This version of mainstage does not support importing files with tempo changes.+
    It's a bit of a problem as the dialogue box appears several times during loading, and I have to click 'OK' every time, which adds to the length of time it takes to load up the concert (something I do several times during the course of my set).
    I'm not using any MIDI stuff, just acoustic and electric guitar plus vocal channel strips and playback channels.
    I've tried out some of my backing tracks, which have a ralletando at the back end, and they still seem to slow down properly (which isn't surprising, as they are audio files), and I've also tried setting all the sets back to the concert tempo, which hasn't stopped the issue occurring.
    Any thoughts, anyone?

    Hi Blueberry
    Well, if you mean I put a tempo curve at the end of some of my audio files in Logic, in order to slow down at the end of the song, then, yes, I did do that. However, that still works in MS2.1, and anyway, why would that no longer be allowed, as that is an essential musical function. Also, if the upgrade meant I had to re-do the exporting nearly 200 backing tracks, them I'm afraid it would be back to 2.01 for me.
    Furthermore, I tried starting MS up in 32 bit, and that didn't make any difference either.
    As it is, this problem is (so far) only an inconvenience as it takes longer for me to load a new concert. What I'd like to understand is what does it refer to? and how can I prevent it showing this message?
    Thanks

  • Does iPhone support bysetpos in calendar events?

    Hi all, I received an appointment created with Outlook that I can not view properly. The event has the following format:
    BEGIN:VCALENDAR
    SUMMARY:XXXXXXXXXXX
    DESCRIPTION:YYYYYYYYYYYY
    LOCATION:
    CLASS:PUBLIC
    PRIORITY:5
    SEQUENCE:6
    DTSTAMP:20110710T205847Z
    TRANSP:OPAQUE
    LAST-MODIFIED:20111005T172156Z
    RRULE:FREQ=MONTHLY;INTERVAL=1;UNTIL=21001214T100000Z;BYDAY=TU;BYSETPOS=2
    DTSTART;TZID=Europe/Madrid:20110510T110000
    DTEND;TZID=Europe/Madrid:20110510T120000
    EXDATE:20110712T0900
    I think that the problem is in the "bysetpos" param of the recurrence rule. Does iPhone support bysetpos param? Is it a limitation of iPhone?
    Thanks

    I solve my doubt. The problem resides in the "until" param. It seems that iPhone/iPad can't interpret correctly an until param greater than 2069. I admint that this problem is very particular, this case is not common.

Maybe you are looking for