Does iPhone transmit when looking for WiFi?

Hi and thanks for reading,
probably this is an obviou question since it is related to the basic of wifi hardware but I did not manage to find anything official on the internet.
When I put on WiFi feature on my iPhone/iPad, it starts searching for WiFi networks every 3-5 seconds.
I am wondering if, during a WiFi search, the searching device transmit any data packet or if it stays all the time in RX mode.
If you can help me, a link to an article/paper about that would be much appreciated.
Many thanks.
Regards,
Luca

There are many programs that will trash a TX - those that aren't specifically written for an NVFS type Palm. Here's a list: http://palmfacts.com/devices/tx/software.php
Did you HotSync the information from a previous Palm to your TX? That will surely scramble it! You'll need to do another Hard Reset, rename your /BACKUP folder to something else, and then do a HotSync...
LPE
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

Similar Messages

  • HT1386 I had to change the computer I have iTunes installed on, my iPhone is still looking for the old computer to sync over WiFi.  How do I change the WiFi computer associated to my iPhone?

    I had to change the computer I have iTunes installed on, my iPhone is still looking for the old computer to sync over WiFi.  How do I change the WiFi computer associated to my iPhone?

    Hi Terri571,
    Welcome to Apple Support Communities.
    See these steps for setting up Wi-Fi syncing between your iPhone and new computer:
    iOS: Syncing with iTunes
    http://support.apple.com/kb/ht1386
    Wi-Fi syncing
    Open iTunes
    To set up Wi-Fi syncing, connect your iOS device to your computer with the included USB cable. Select your device under Devices on the left-hand side.
    In the Summary tab, select "Sync with this [device] over Wi-Fi".
    Whenever the computer and the iOS device are on the same network, the iOS device will appear in iTunes, and you can sync it. The iOS device will sync automatically when all of the following are true:
    The iOS device is plugged in to power
    iTunes is open on the computer
    The iOS device and the computer are on the same Wi-Fi network
    While the iOS device appears in the left-hand column of iTunes, you can select the content tabs and configure sync options.
    Click Apply or Sync to sync the iOS device.
    If the iOS device does not appear in the Devices section or you are unable to sync, please see this article for troubleshooting.
    Best,
    Jeremy

  • When connecting to my wifi I get ! When looking for networks

    When connecting to my wifi I get ! When looking for networks
    I

    When you see an exclamation point in the Wi-Fi menu, from the menu bar, select
     ▹ System Preferences... ▹ Network
    Click the Assist me button and select Assistant. Follow the prompts. You may get a warning that Wi-Fi is not available, that you're too far from the base station, or that you're using the wrong password.
    Assuming that you've ruled out those possibilities, click the lock icon in the lower left corner of the preference pane and authenticate, if necessary. From the Location menu at the top of the window, select Edit Locations. A sheet will drop down. Click the plus-sign button to create a new location. Give it any name you want. In the new location, set up the Wi-Fi service with the same settings you used before. Click Apply and test.

  • Does iTunes match only works on my Iphone 5 when im on wifi network??

    Does iTunes match only works on my Iphone 5 when im on wifi network??

    Go to Settings > iTunes and App Stores and set to "use cellular data" to ON. Be aware this will use your mobile data allotment when streaming music.

  • I just bought iPhone 5c. Looking for LifeProof case. Does Nuud will protect my screen from scratches and shatter? Or should I go with Fre?

    I just bought iPhone 5c. Looking for LifeProof case. Will Nuud protect screen from scratches and shatter? Or should I go with Fre?
    Thank you for suggestions.

    Have a look at this comparison from the manufacturer.
    http://www.lifeproof.com/blog/2013/10/nuud-or-fre-lifestyle/

  • Having trouble seeing all pix, when looking for something on ebay.

    When looking for an item on ebay, some of the pictures are blank. 
    when I open an item with a blank pix, the picture is there.

    What model laptop do you have?
    Have you tried using a different USB port?
    If you have a USB flash drive or external hard drive, does that work when connected to the same port?
    - Peter

  • Finder crashes when "looking for networks" - workaround that helps

    I've read through most of the messages about finder crashes, but what's going on in my case I haven't seen. As I have a work around, I thought I should post.
    If for whatever reason the wireless connection pauses or gets interrupted (for example, by closing the lid), the finder hangs in the process of "looking for networks."  Most of the time I can still pull up the dock -- the spinning beach ball only clicks in if I mouse over the top menu bar. Sometimes (but not always) I can quit open applications through the dock before I have to do a hard reset.
    My workaround is this: I turn wi-fi off before I close the lid. When I open the lid, I wait a short time -- 30 seconds, about -- and turn the wireless back on, and this way I can avoid the finder crashing.  If the wi-fi pauses for some other external reason, when "looking for networks" starts up, the finder will hang again.
    It's way past  time that Apple coughs up a permanent fix, but this might help somebody who's having the same problem.  And maybe somebody has a better workaround, in which case, I'd love to hear about it.

    Fire_Bird wrote:
    1. Going into a folder on my external hard drive that contains the installer for divx for mac.
    Divx has been a source of problems with both Tiger & Leopard. See for example Mac OS X 10.5: Finder may not fully "load". If you have installed it, it is probably at least part of your problem.
    then i erased the whole thing, and used the Mac OS X 10.5 install DVD that came with my mom's iMac (still happens)
    This is not recommended. The install disks that come with specific Mac models do not necessarily install the same things or do all the error checks that the retail Leopard installer disk does. (It is also a violation of the software license to install it on another Mac.) If you want a trouble-free, supported installation of Leopard, use only the retail installer or a disk specifically intended for your exact Mac model.

  • Siri does not work when used for calling a contact function

    Siri does not work when used for calling a contact function

    Very strange, try to turn off/on your iPhone. Or make a reset (home+power button)...
    If it continues try to restore it.

  • Does iPhone record when sound is manually turned off via the external side switch?

    Does iPhone record when sound is manually turned off via the external side switch? Enquiring minds want to know.

    Are you asking if the phone logs when someone mutes it? No, I don't believe so. Or, are you asking if audio recording apps still record when the phone is muted? Why don't you use the included VoiceMemo app and test it?
    Best of luck.

  • I am looking for wifi adapter for my MacBook Pro(Mavericks 10.9.2)

    i am looking for wifi adapter for my MacBook Pro(Mavericks 10.9.2). Somebody help me to find compatible Wifi adapter for my MacBook.
    Thank you!!

    RRAJJ wrote:
    Thanks Bob! i already opened this search page but i didn't found anything compatible to mavericks!!!!
    Then you are not looking very well. The first one in the list has compatible wifi adapters. Mavericks compatable wifi adapters are included in most of the results from my link.
    If there are not enough results included in the list try modifying my search term. Try this instead:
    https://www.google.com/search?q=usb+wifi+adapter+for+mavericks
    There are dozens/hundreds listed.

  • Does iPhone 3g have signatures for text messaging?

    Does iPhone 3g have signature for iphone 3g and how do you turn it on if it does

    Thanks for the info
    signature as the ones u put in the e-mail, as ur name and other info or whatever u want?

  • IMovie start up stops when looking for i Photo video's

    iMovie starts up but when looking for new iPhoto video's it looks like the program is in a loop and nothing happens anymore. I can only stop the loop by forcing the close of the program.

    Removed all iMovie preference files from the library folder, still hangs on start up with the same message
    "Updating iPhoto videos Event"
    "Scanning for new videos in your iPhoto Library"
    Gets half way thru scan,hangs. Spinning ball and iMovie "not responding" in Force quit window
    Running iMovie is 9.0.1, on a completly standard machine as supplied from the factory
    Cheers
    Phil
    Message was edited by: Philip Smith2

  • My brand new iphone 6 when charging for the first time gets a message "iphone needs to cool down before using" cannot even charge it

    My brand new iphone 6 when charging for the first time gets a message "iphone needs to cool down before using" cannot even charge it. Have offed and on several times, but same result. Any help on this.

    To resume use of your device as quickly as possible, turn it off, move it to a cooler environment, and allow it to cool down.
    You can read more on :Keeping iPhone, iPad, and iPod touch within acceptable operating temperatures

  • Does iphone supports IPv6 traffic for icloud?

    Hi Everybody,
    Does iphone supports IPv6 traffic for icloud application?

    ckuan
    The question was whether iPhones supports IPv6 protocol. Why would it matter if the network supports IPv4, IPv6, Dual stack or any other protocol? The straight answer is NO it does not as of today (even if the users have to worry about it or not, which is irrelavent imho).
    regards, sajith
    http://www.kaimals.com/

  • My second brand new iphone 6 when charging for the first time gets the message "iphone needs to cool down before using" cannot even charge

    My brand new iphone 6 when charging for the first time gets a message "iphone needs to cool down before using". I cannot even charge it. I offed it and on it several times, still the same message keeps on coming.

    To resume use of your device as quickly as possible, turn it off, move it to a cooler environment, and allow it to cool down.
    You can read more on :Keeping iPhone, iPad, and iPod touch within acceptable operating temperatures

Maybe you are looking for

  • New Hard Drive - Software Update Problem

    I have a 13' MacBook Pro running OS X v.10.6.7  Snow Leopard, a little more than a year old.  A few weeks ago, it had a kernel panic..long story short, ended up needed my hard drive replaced.  Now I have the new hard drive, moved all of my files from

  • Message bundling issue

    Hi all,       I have a unbounded message with the following structure      messagename(unbounded)      Header        element1      LineItem      Item(unbounded)        orderno        lineitemno      ex:    message'1'    Header       a    Lineitem   

  • Make a screen pop up

    Hi After a report is being displayed and the user wants to print it, normally the standard printing screen appears But the requirements is to have a screen appearing which contains all the documents on the report, a 'Print' and a 'Cancel' button I ha

  • Could not open console in WLS 7

    Hi, all I am using WLS 7 and I can start the server within JBuilder but when I start the server outside JBuilder , I can not open the console window and can not run application deployed in WLS 7. Any idea? Thanks in advance.

  • [Q]rfc c library compile error

    Hello! I am establishing the IVR call to the SAP. The IVR machine is SUNOS 5.6. IVR should use the library, librfc.a, but when I compile with this library, I got the compile error like below. The error message is undefined first reference symbol in f