Does iPhone5 support 5GHz band/channels

Does iPhone5 support 5GHz band/channels? If it does not support that I cannot use it. My neighbors all interfere on the 2.4GHz channels so I need to use the 5GHz channels to use WiFi on my phone. Home WiFi is getting too popular.

No problem. Enjoy it! It's a great piece of tech! Thanks for the points

Similar Messages

Does iphone5 supports all the lte bandclasses for lte operators apple supported?

Recently, apple has announced a list of operators that supports lte, http://www.apple.com/iphone/LTE/.
For model A1429(cdma model),Verizon is one of these operators that supports lte.
Here's two question,anyone knows?
1.What 's the lte bandclass currently used by Verizon that supports lte of iphone5?
2.If iphone5 currently support all bandclasses(1,3,5,13,25) for verizon? Or only bandclass 13 is limited by iphone5 when using verizon's lte network no matter which lte bandclass is currently supported by verizon?

If the article lined can solve the problem, i would not ask.
All bandclasses refered in my question are bandclass(1,3,5,13,25).My question is that does iphone5 support bandclass 5 of lte for verizon if VZW operates this bandclass which apparrently verizon isn't operation now?

H520 wireless card (realtek 8188e)-does it support dual band router

Solved!
Go to Solution.

hi Dia,
As per this pdf data sheet, the Realtek RTL8188EE is a single band (2.4Ghz) Wi-Fi card. If your router is a dual-band, you need to configure it to broadcast 2.4Ghz frequency so that the Ideacentre H520 can connect. Otherwise, it will not be able to connect to the 5Ghz band.
Regards
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Does the iPhone 4S support the 5GHz band?

While the iPhone 4 supported 803.11(n), it did so only on the 2.4GHz band. I can't find any information about this for the 4S. Does anyone know if it supports the 5Ghz band?
Sorry....I asked too quickly. The answer is NO. See http://www.apple.com/iphone/specs.html
Message was edited by: Robert Camner

stevenfromwaterdown wrote:
I wan't to use my 5ghz wifi on my iPhone 4S but it can't see the SSID for my 5ghz network. The specs page for the iPhone 4S states it uses:
802.11a/b/g/n Wi-Fi (802.11n 2.4GHz and 5GHz).
No, it does not state that.
The 4S does not have the 5GHz radio.
http://www.apple.com/iphone/compare-iphones/

Does mac mini (late 2014) supports dual-band wifi sharing?

Hello,
First of all, i'm not native speaker, so, please excuse my poor english.
I have a mac mini (late 2014) and use the wifi-sharing feature of yosemite.
(Ethernet is connected to Mac mini and other devices such as mac air are connected to Mac mini through wifi)
For wifi-sharing, channel 44 is used, and as i know, it is located on 5Ghz band.
By the way, i plan to buy a sony srs x7 bluetooth speaker which also supports airplay only on 2.4GHz wifi internet.
If i wanna connect that speaker to Mac-mini's hotspot, should i change the wifi-channel of mac-mini to 2.4GHz band? or, can mac mini provides wifi hotspot for both 2.4GHz and 5GHz simultaneously?

Bluetooth is a different network than the wifi network. BT is 2.4 GHz only while wifi cn be 2.4 and/or 5 GHz.
Your BT speakers will work fine using the BT capability of the Mac
Communications
Wi-Fi802.11ac Wi-Fi wireless networking; IEEE 802.11a/g/b/n compatible
BluetoothBluetooth 4.0 wireless technology
Ethernet10/100/1000BASE-T Ethernet (RJ-45 connector)

Does IPad 1 support 5GHz 802.11n..???!!!!

Does IPad 1 support 5GHz 802.11n..???! or just 802.11a for 5GHz band.
Thanks

Yes it does support both 2.4 and 5 GHz. The specs N and to meet N you have to have both. If you look at the specs for the fourth generation (the latest one) iPod Touch it says "802.11n 2.4GHz only".

Why does not my iPhone 5S work on LTE of Plus GSM network in Poland although my model supports LTE Band 3?

am My iPhone 5S does not support LTE of the Plus GSM network in Poland? It works in Band 3 and my model supports that band but it is not possible to use LTE although it works on my other Android phone. The network operator suggested contacting Apple.

Thank yo Tim, but actually I beg to disagree with you about that I chose to use the wrong carrier. But I have not given all details of the story:
When I was buying the iPhone at an Apple store in the US I explicitly asked whether LTE would work on my network in Poland,which uses LTE Band 3. She was very nice and checked something in the specifications and said that the model I would buy supports this band so that everything would be fine.
Unfortunately back in the country it turns out it does not work not and I expect Apple to take a stand on that. I have already filed a complaint on Apple helpline. I hope they will solve the problem...

Does ThinkPad Yoga S1 support 5Ghz Wifi service?

Hello Everone?
I bought my Yoga S1 in May 2014 . It working nicely under the environmet of 802.11n support Wireless router.
Yoga S1 features 802.11.ac. That is why I bought new wireless router which supprot 802.11ac (2.4Ghz, 5.0Ghz)
But, my yoga S1 does not catch 5Ghz wifi service, even can not see any signal about 5Ghz frequency, only catch 2.4Ghz antenna.
Other gardgets such as iphone, iPad has no problem catching ans using 5Ghz wifi over my new 802.11ac wireless router.
Please give me some hints why this happens to my Yoga S1.
Thanks a lot.

Hello and welcome,
Not all TP Yogas have 5GHz capable wifi cards. There are several configurations available.
Can you go to device manager and determine which wifi card you have? Or provide the laptop model number?
Z.
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc. The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

IPhone5 rejects does not support my new MacBook Pro

My new MacBook Pro on 10.8.4 established bluetooth contact with my iPhone5, but the phone said it does not support my MacBook Pro. Why?

Dear snozdop
After 38 years with computers and programming I suddenly realize that my thoughts are not functioning in the rational way they used to behave. Things you have done as a regular habit for many years could suddenly be forgotten…
Thank you for advising me and putting me back on the track that I should have been on from the beginning this rainy early morning way up north of the arctic circle.
It also remindes me of a rule I made myself many years ago when programming: Some times it is wiser to put away the computer for a while and then in time the answers to problems will come.
Thank you again for spending time advising me of the obvious solution.

VB6 NI-USB-9237 DAQmxCreateAIVoltageChan selected physical channel does not support the measurement type required

I have a VB6 program with code that properly reads analog inputs from an NI-USB-6008.
I tried to re-use the code for a strain-gage module NI-USB-9237, but at the DAQmxCreateAIVoltageChan step I get the following error:
"Measurements: Selected physical channel does not support the measurement type required by the virtual channel you are creating.
Create a channel of a measurement type that is supported by the physical channel, or select a physical channel that supports the measurement type."
Should I be calling a function other than DAQmxCreateAIVoltageChan?
If so, what is it, or where can I find the reference for such functions?
Or - if that is the right function, should I pass different arguments? Currently I'm calling:
DAQmxErrChk DAQmxCreateAIVoltageChan(taskHandle, "Dev1/ai1", "", DAQmx_Val_Cfg_Default, -10, 10, DAQmx_Val_VoltageUnits1_Volts, "")
Thanks in advance for your help
-Chris Hardy
Solved!
Go to Solution.

I figured it out from 372251a.PDF
First, the correct function is DAQmxCreateAIVoltageChanWithExcit
Second, you can't just ask for one sample on one channel - ask for 2 samples instead.
-Chris Hardy

When does iphone5s 1528 with iphone6,2 support china unicom's 4g lte network?

When does iphone5s 1528 with iphone6,2 support china unicom's 4g lte network? Before I activate the cell phone, I could see the 4g at the left corner on the screen, but once I activated the cell phone, the 4g disappeared and 3g instead. It was a terrible experience. It seems that my phone support 4g but Apple and China Unicom disable the functionality.

All the information you need is right here: http://www.apple.com/iphone/specs.html
Notice there is no mention of WiMax.
It doesn't really matter anyway as Sprint is rolling their WiMax network down for use by MVNOs. Actual Sprint customers will not have access to WiMax at all. It was a failed experiment.

Does the newly in-store unlocked iphone5 support WCDMA network globally?

Hey guys,
Does the newly in-store unlocked iphone5 support WCDMA network globally?

Especially with China Unicom which was the WCDMA 3G network.
Thanks

How to syncronize an iphone5S within a Macbook 10.5.8 that does not support the lattest version of ITunes?

Does somebody know how to syncronize an iphone5S within a Macbook 10.5.8 that does not support the lattest version of ITunes?

Macintosh System Requirements
Mac computer with an Intel Core processor
OS X version 10.6.8 or later
400MB of available disk space
Broadband Internet connection to use the iTunes Store
You need to upgrade your OS X before installing the latest version of iTunes. Then you will be able to sync your 5S.

Does the 32C120U support Audio Return Channel?

Hi,
setting up my first home theater with a 32C120U & cannot find any reference in the manual to ARC. May I assume then that the 32C120U does not support ARC?
Basically trying to find out if a Toslink is required with a Yamaha RX-V373 receiver - all HDMI connections.
thanks

If they are mp3 you could change the settings for the files in iTunes to remember playback position by highlighting the files and rightclicking and going to "Get Info". If not there are some apps such as OverDrive Media that will support downloading and playing audiobooks (some free at that) through services provided by some local libraries and OverDrive themselves.

Verizon G1100 Quantum Gateway router spurious 5Ghz output channel

Anyone seeing this situation? About a week ago I installed a new G1100 Quantum Gateway router without any problems. I have a desktop PC with a 5GHz WiFi adapter card and a Kindle Fire HD which use channel 149 at 5GHz. I also have an IBM Thinkpad using the 2.4GHz channel 11. The Kindle has a WiFi Analyzer app which allows me to view the activity on both 2.4GHz and 5GHz. Until about two days ago the WiFi analyzer and the Wireless Network Connection display on the desktop PC showed only one signal in the 5GHz band. Since then they both show two identical signals on channel 149 which have the same strength but different identification info. If I change the channel it just shifts both signals together. I spent almost an hour with a tech on live chat yesterday. He "looked" at the router and asked a lot of questions. He tried some things from his end with no change. He finally suggested doing a factory reset. I tried that today and still no change. I'm beginning too think I have a defective unit. The spurious output hasn't caused any problems so far but I find it very strange.

Since I posted the original inquiry, I have talked with Verizon tech people twice with no resolution. The last person agreed to send me another router. After a week or so it had not arrived so I inquired and the customer service rep couldn't find a tracking number. A second one was sent out and as luck would have it both arrived within a day or two of each other. So then I had three routers. I put one of them in service and got the same result, two signals on the same channel in the 5Ghz band. I then plugged in the other router but did not connect the FIOS cable to it, just let it sit there by itself. My WiFi scanner on the kindle showed only one signal at 5Ghz for this router and two signals for the router connected to FIOS. I then swapped routers, connecting the single signal router to FIOS and putting the two signal router aside. The WiFi scanner now showed two signals on the router which previously had only one signal at 5Ghz!!! The two signal router which was now not connected to FIOS still showed two signals also. Apparently, the routers initially have single signals when manufactured but FIOS software programs the device resulting in a different signal spectrum probably due to the security encoding algorithms utilized. By the way, depressing the factory reset button for 10 seconds or more does not return the router signal spectrum to a single signal. Also, I have not seen this characteristic in the 2.4Ghz band while using WEP encoding (my old laptop does not support anything else). The 5Ghz band uses WPA2.

Does iPhone5 support 5GHz band/channels

Similar Messages

Maybe you are looking for