Does iPhoto save original picture when it has been cropped?

Hi, I have editd some pictures to crop them. Once done, I don't seem to find a saved copy of the original picture. Does iPhoto keep the original somewhere and if yes where? Or is this normal behaviour and I should "duplicate" my photo to keep an original and play with the copy when cropping? Thanks for the feedback, ML

Yes, iPhoto saves your Original pic. All operations - cropping, editing, fixing, exporting - are carried out on a copy of the file.
iPhoto does not show you the “before” and “after” side by side. If you want to compare then simply hold the shift key. (Remember you need to be in edit mode to for this to work.)
You can remove the edits by going Photos -> Revert to Original.
Regards
TD

Similar Messages

When I create a new album, why does iPhoto 11 separate pictures into untitled albums?

When creating a new album, why does iphoto 11 separate pictures into untitled albums? I want all designated photos in the album i created..

I'm guessing you're missing the album in the left hand pane by just a bit and thus creating new albums for each of the photo you're dragging. Make sure the album is highlighted as in this screenshot (iPhoto 9.4.2) before releasing:
A sure file way to get an album with the photos is to select the photos again and use the File ➙ New Album menu option
and that will produce a new album with the photos that were selected.
OT

Where does iPhoto save imported files???? how do you "save"?

ok this is driving me crazy:
I've imported photos and movie clips from my camera through usb through iPhoto.
Where does iPhoto save these files?
I've opened iMovie to find the movie clip and I can't find it anywhere...
also: after editing a photo in iMovie, how do you "save" it?

Chris
You’ve a bit of a learning curve ahead of you as you obviously haven’t really understood iPhoto, what it is and how it works. You could do yourself a favour and have a look at the tutorials at http://www.apple.com/ilife/tutorials/#iphoto
To specific cases:
When you press "done" it doesn't save it (find the photo in its original file and open it with Preview, you'll see it hasn't been saved).
Yes, but it has! You see iPhoto will always preserve your Original file. So when you make edits it carries out these on copy of the file. You can see this in the iPhoto Window. There is no way to make iPhoto edit the original file.
I have opted for iPhoto not to duplicate my photos and keep its own library (to me that doesn't make any sense, my photos are about 15GB, I wouldn't want them to turn into 30GB for no reason!),
1. The best solution for that it to allow iPhoto to copy the files into the Library and then remove your own copies.
2. When you go to iPhoto Menu -> Preferences -> Advanced and uncheck 'Copy Files to the iPhoto Library on Import', you are running what is called a Referenced Library. In a Referenced Library iPhoto will not copy the files on import, but rather simply reference them on your HD. To do this
it will create an alias in the Originals Folder that points to your file.
It will still create a thumbnail and,
if you modify the pics, a Modified version within the iPhoto Library Folder.
However, you need to be aware of a number of potential pitfalls using this system.
1. Importing and deleting pics are more complex procedures
2. You cannot move or rename the files on your system or iPhoto will lose track of them on systems prior to 10.5 and iPhoto 08. Even with the later versions issues can still arise if you move the referenced files to new volumes or between volumes.
3. Most importantly, migrating to a new disk or computer can be much more complex.
Always allowing for personal preference, I've yet to see a good reason to run iPhoto in referenced mode unless you're using two photo organisers.
If disk space is an issue, you can run an entire iPhoto Library from an external disk:
1. Quit iPhoto
2. Copy the iPhoto Library as an entity from your Pictures Folder to the External Disk.
3. Hold down the option (or alt) key while launching iPhoto. From the resulting menu select 'Choose Library' and navigate to the new location. From that point on this will be the default location of your library.
4. Test the library and when you're sure all is well, trash the one on your internal HD to free up space.
If you're concerned about accessing the files, there are many, many ways to access your files in iPhoto:
*For Users of 10.5 Only*
You can use any Open / Attach / Browse dialogue. On the left there's a Media heading, your pics can be accessed there. Apple-Click for selecting multiple pics.
Uploaded with plasq's Skitch!
You can access the Library from the New Message Window in Mail:
Uploaded with plasq's Skitch!
*For users of 10.4 and 10.5* ...
Many internet sites such as Flickr and SmugMug have plug-ins for accessing the iPhoto Library. If the site you want to use doesn’t then some, one or any of these will also work:
To upload to a site that does not have an iPhoto Export Plug-in the recommended way is to Select the Pic in the iPhoto Window and go File -> Export and export the pic to the desktop, then upload from there. After the upload you can trash the pic on the desktop. It's only a copy and your original is safe in iPhoto.
This is also true for emailing with Web-based services. However, if you're using Gmail you can use iPhoto2GMail
If you use Apple's Mail, Entourage, AOL or Eudora you can email from within iPhoto.
If you use a Cocoa-based Browser such as Safari, you can drag the pics from the iPhoto Window to the Attach window in the browser.
*If you want to access the files with iPhoto not running*:
Create a Media Browser using Automator (takes about 10 seconds) or use this free utility Karelia iMedia Browser
Other options include:
1. *Drag and Drop*: Drag a photo from the iPhoto Window to the desktop, there iPhoto will make a full-sized copy of the pic.
2. *File -> Export*: Select the files in the iPhoto Window and go File -> Export. The dialogue will give you various options, including altering the format, naming the files and changing the size. Again, producing a copy.
3. *Show File*: Right- (or Control-) Click on a pic and in the resulting dialogue choose 'Show File'. A Finder window will pop open with the file already selected.
so the problem still exists, why doesn't it save new photos in my pictures folder?
Because you told it not to. When you run a Referenced Library +you are responsible for File Management+. Remember that bit above where I said
1. Importing and deleting pics are more complex procedures
You need to put the files where you want them, then import them to iPhoto. Iphoto has no control over any file outside the Library Package. So when it comes to deleting things you’ll need to remove the pics from iPhoto and then go and root them out from your folder structure by hand.
None of this is the case if you run a Managed Library.
or ask me where to save them?
Because that’s not what it does. Check out Image Capture for that.
I'm worried that if I now let it save all my new photos to its iPhoto library (which is basically a virtual library as I understand it)
What do you mean by a “virtual library”?
and in a year's time I change laptops I run the risk of loosing photos as I won't know which photos are were (now I can do a back up to an external drive simply by copying the folders I choose from the pictures folder.
If you run a Managed Library then backing up and migrating are both very simple. You simply back up the iPhoto Library or move it as the case may be. There are many, many back up utilities that will do incremental back ups if the Library: Time Machine, DejaVu Chronosync are several but there are a hundred more. Search on MacUpdate.
If you run a Referenced Library you must +back up the Originals and the iPhoto Library+ (to get your Albums, Modified Versions and so on). Migrating rto a new machine is a bear too, as you cannot allow the path to the files to alter. (See my pitfall no. 3 above.
Worst of all: a mixed Managed/Referenced Library: a recipe for data loss.
My strongest advice to you is to start over with iPhoto. Create a new Library: Hold down the option (or alt) key key and launch iPhoto. From the resulting menu select 'Create Library' and import 100 pics into it and explore it for a week or two. Get to know the ins and outs a bit and se how it works. Then decide if it’s the right app for you. By all means post back if you need more info.
Regards
TD

Why is it that even after editing a picture under iPhoto, the original picture is still the file that is being exported?

Why is it that even after editing a picture under iPhoto, the original picture is still the file that is being exported?

because you are exporting the original?
SInce you give us no information at all we can only guess and that is the most likely
How are you editing the photo - iPhoto? An external editor? How?
how are you exporting?
Remember we are users just like you - not psychics
LN

Message.app Version 7.0.1 (3322) does'nt show my picture when I chat from my mac Lion 10.8.5

Message.app Version 7.0.1 (3322) does'nt show my picture when I chat from my mac Lion 10.8.5
But my email show my picture.

Thank you for your prompt reply, Niel.
The website that I will use supports the following browsers:
Internet Explorer v.8
Internet Explorer v.9
Internet Explorer v.10
Internet Explorer v.11
Mozilla Firefox v.32
Google Chrome v.37, v.39
Safari v.5.1.7 (PC) and v.7.0.6 (iOS)
Other browsers and versions may not function well with the website. Therefore, they recommend to use one of the above-mentioned browsers.
Can I download any of these browsers to my MacBook Air if I already have a Safari browser? (can I have 2 browsers and which of those do you recommend that I download to my computer)?
Thanks again!

Why do Sony DSC-RX100M3 raw files look strange in PE9 when flash has been used in the shot?

I have just bought a Sony DSC-RX100M3 camera and use it to shoot raw + jpeg. I want to use the raw files in my Photoshop Elements 9, which has the Camera Raw plug-in version 6.5.0.216 installed. I have downloaded the Adobe DNG converter version 8.7.1.311 so I can import my Sony raw files into PE 9 as they cannot be used directly. Most of the time these raw files look OK, but when I use the flash on my camera and then look at the raw files in PE9 they look far more pink than the corresponding jpeg files. The jpeg files look more or less as I remember the scene when I shot the picture.
When I look at the same raw and jpeg files in Sony's own Image Data Converter software (version 4.2.04.17270) the raw and jpeg files look very similar to one another, and there is no pink colour cast in the raw file.
What am I doing wrong in Photoshop Elements? I though the DNG converter keeps all the information from the original raw file and makes no changes to it, so why does the raw file look so different when flash has been used?
Thanks for any help you can give!
AVM

Looking at the pictures of the camera online, I'd say there is no lens shade--a device to keep light from the sides from causing lens flare--and the camera lens, itself, was just too far extended and there was a lens shadow. You probably can't use the flash that close up and should back off and zoom in further. Experimenting would give you a sense of what situations will have a shadow of the lens or not.
Your ACR plug-in is old enough not use have Process Version 2012, yet, only 2010 and 2003 so Adobe didn't have the idea to put the selector down next to the camera profile. The toning options are better with Process 2012 so that would be a reason to upgrade, but I am not sure that the Camera Neutral profile in PSE9 would be different than PSE13. If Adobe changed the camera profiles then people's pictures would look different once they upgraded to a new version and that's not something that's supposed to happen.
You can certainly download the PSE13 trial and see if things look any different, but they may not: Download a free trial or buy Adobe products | Adobe downloads There would be newer minimum OS version requirements for the newer versions of Adobe software so check those out before trying to install, unless you're on Windows 7+ or OSX 10.8+ then it should be fine.
One more thing, the White-Balance tint is set to +10 by the camera:
This As Shot WB is more magenta and even when using the Adobe Standard profile, moving the Tint down to +0 makes things a little more green like your camera JPG. So there is more than just changing the camera profile that you can do:

How do I purchase reader extensions to save a PDF form that has been filled out in Acrobat Reader?

I have just discovered that in order to save a PDF form that has been electronically filled out in Acrobat Reader, that I have to purchase reader extensions to make this possible. I would like to speak to someone about the price and how to purchase.
I cannot find a phone number on your site, so I am hoping to get an answer from Adobe this way.
Thanks,
Chani

Thanks everyone for responding. I should have supplied more information.
I was hired by my client to create PDF forms that can be downloaded from their website, filled out electronically in Acrobat Reader, and then saved (with all the form fields filled in) and emailed.
I was supplied with scanned forms as the base for creating the form fields in Acrobat Pro. These web visitors that will be filling out the forms and emailing them will only have Acrobat Reader, most likely.
I created the forms in Acrobat Pro, and they worked great when I tested them ( in Acrobat Pro) - I could save the form field data. However, my client has come back to me with numerous complaints from their web visitors - they cannot save the form once they have filled it out in Acrobat Reader and keep the data they have entered. Instead, they have to print the form physically, scan it, and email it that way (kind of low tech for the year 2013, and not easy for these people).
So, my end goal is to update these forms in Acrobat Pro so they can be filled out by folks only using Acrobat Reader and saved with the form field data intact. Seems like a no-brainer that Acrobat Pro should have this capability without purchasing additional extensions. However, in my research online, I have found several posts that suggest that purchasing "Reader Extensions" is the only way to enable Acrobat Pro to be able to do this.
Can someone please clarify if I need to buy something to program these forms in Acrobat Pro to enable other people using Acrobat Reader to fill out these forms and save them with the form fields intact?
If I do need to buy something, what is it exactly? How do I find out clear, consise, specific information about buying it/the cost/the licensing? I am a sole owner/employee of a graphic design firm and these forms are for my client, which is a locally-owned regional hospital.
If this needs to move to the LiveCycle forum, fine, but I don't really know what that software is and since I'm only using Acrobat Pro (and the users, Acrobat Reader) I felt this was the appropriate place to post.
Thanks for all of your responses!
Chani

E-mailing users when data has been loaded.

Does anyone have some information on setting up FDM to e-mail certain users when data has been loaded for certain locations? Not sure what steps need to be taken to setup the FDM server, FDM and just wondering if there are any generic scripts that can be used.

You would need to write a custom script to do this. You can use the E-mail Accelerator to do this, and it would need to be included in an event that fires after load.

HT1414 When updating my iphone with new software it came up on screen with the cable and itunes sign (which is what I should get when restoration has been completed) yet it is still saying restore. I have tried 3 times and the screen won't change. HELP!

When updating my iphone with new software it came up on screen with the cable and itunes sign (which is what I should get when restoration has been completed) yet it is still saying restore. I have tried 3 times and the screen won't change. HELP!

If the sign does not go away it has not completed the restore. So you are incorrect when you say it "keeps completing the restore" if that message is still displayed.
Do you get an error message? If so, what is the error number?

HT1212 How do i restore my iphone when it has been disabled and can not be restored through itunes because of the error message that says "The iphone software update server could not be contacted.

How do i restore my iphone when it has been disabled and cannot be restored through itunes because of the error message that says "The iphone software update server could not be contacted

Have you jailbroken this device? This will make the iPhone not talk to the Software Update Server (that signs and accepts software updates) please refer to the following link? Error 3194, Error 17, or "This device isn't eligible for the requested build"
The iPhone will talk to the software update servers, just need to change the host files, it's a simple process, sorry if you were confused about the wording in to top?

How do I unlock my iPod touch when it has been disabled?

How do I unlock my iPod touch when it has been disabled? My children can't remember the four digit pass code they entered and it is now disabled.

Recovery mode...
http://support.apple.com/kb/HT1808
You may need to try this More than Once...
Be sure to Follow ALL the Steps...
But... if the Device has been Modified... this will Not necessarily work.

How do I edit and save a word document that has been e-mailed to my ipad

How do I edit and save a word document that has been e-mailed to my ipad and then re-send

Use the paid version (install and activate) of Microsoft Word.
https://itunes.apple.com/sg/app/microsoft-word-for-ipad/id586447913?mt=8

HT4060 ipad does not seem to be charge. has been plugged in for about 5 hours and low battery photo remains...cannot turn on or off... only low battery photo and apple symbol or blank page appear

ipad does not seem to be charging. Has been plugged in for about 5 hours and low battery icon remains same...alternates with apple symbol or blank page. cannot turn ipad on or off

The iPod Touch kept trying to reboot yesterday but would only show the Apple logo screen then shut off - it finally drained the battery overnight I am guessing. Connected to USB the battery charging icon flashes.
Took it back to Best Buy, but they wouldn't touch it or replace it since it's under warranty.
To any potential buyers - beware. My best advice is to look somewhere besides Apple. Every Mac user I know has had to return a Mac, laptop, etc. Really poor quality control, and the retailers agree (Geek Squad told me they have had the same experience with Apple products).

Why is the message app popping up on my mac when everything has been disabled on my iphone and mac, I use my phone for messages, not my mac. Is this a bug? I just want it off my mac forever!

Why is the message app popping up on my mac when everything has been disabled on my iphone and mac as per the instructions all over this forum, I use my phone for messages, not my mac. Is this a bug? I just want it off my mac forever!
Have disabled in Messages > preferences on the Mac
imessage is disabled on my iphone
Same goes for Safari which pops up on the mac when I open it on my iphone, how can I disable it all?

Thanks but have signed out, disabled and nothing.
It's Yosemite not Mavericks.
What it won't let me do is delete the account as the - button is greyed
out.
It won't let me delete the app from the OS
On Monday, February 2, 2015, Apple Support Communities Updates <

Is it possible to block an ipod touch when it has been stolen ?

Is it possible to block an ipod touch when it has been stolen ?

- If you previously turned on FIndMyiPod and wifi is on and connected go to iCloud: Find My iPhone, sign in and go to FIndMyiPhone. If the iPod has been restored it will never show up.
- You can also wipe/erase the iPod and have to iPod play a sound via iCloud.
- Change the passwords for all accounts used on the iPod and report to police
- There is no way to prevent someone from restoring the iPod (it erases it) using it.
- Apple will do nothing
Reporting a lost or stolen Apple product
- iOS: How to find the serial number, IMEI, MEID, CDN, and ICCID number

Does iPhoto save original picture when it has been cropped?

Similar Messages

Maybe you are looking for