Does iPlanet 5.1/5.2 supports event change notification ?

Does iPlanet 5.1/5.2 suports event change notificaiton? I did query against root DSE, but 2.16.840.1.113730.3.4.7 does not show up as supported control. Just enable the change log does not help.
What is the proper way to get entry change notificaiton work on iPlanet 5.1/5.2?
Thanks.

Could you perhaps use persistent search? Doing persistent searches with ldapsearch is described a bit in http://docs.sun.com/source/816-6400-10/lsearch.html
HTH,
Mark

Similar Messages

HT2513 I have a message that I cannot eliminate. "The Anniversary calendar does not support events". I cannot find any event associated with the anniversary calendar. In fact I have deleted the anniversaries from my calendar. any ideas?y

I have started to use ICal and yesterday started to receive a message "The Anniversary valendar does not support events". I have searched my calendar events and cannot find any event associated with the anniversary calendar. I have turned off the anniversary calendar and deleted fro my calendar and the message still occurs. The MacBook Pro that I sync does not have this message. Even when ICal is turned off the message still occurs. Any ideas?

I have started to use ICal and yesterday started to receive a message "The Anniversary valendar does not support events". I have searched my calendar events and cannot find any event associated with the anniversary calendar. I have turned off the anniversary calendar and deleted fro my calendar and the message still occurs. The MacBook Pro that I sync does not have this message. Even when ICal is turned off the message still occurs. Any ideas?

Error message: "The Birthdays calendar does not support events."

Error message: "The Birthdays calendar does not support events." pops up 100 times..probably as many times as I have birthdays in my contacts....very irritating...

Well mother of christmas Apple, what the **** is this?! Please help us get this off the screen

Does iPlanet Calendar Server 2.x (iCS 2.x) support IETF iCalendar standards?

Does iPlanet Calendar Server 2.x (iCS 2.x) support IETF iCalendar
standards?
<P>
iPlanet Calendar Server was designed from the ground up to support
IETF calendar
standards. Its standards-based features make it easier for users to
share
calendaring information across the network. As standards continue to
evolve and
emerge, iPlanet will continue to support for these new IETF standards.
The relevant IETF calendar standards are:
<ul>
<li>iCalendar (RFC2445)
<li>iTIP (RFC2446 iCalendar Transport-Independent Interoperability Protocol)
<li>iMIP (RFC2447 iCalendar Message-Based Interoperability Protocol)
<li>CAP (draft - Calendar Access Protocol)
</ul>

Does iPlanet Calendar Server 2.x (iCS 2.x) support IETF iCalendar
standards?
<P>
iPlanet Calendar Server was designed from the ground up to support
IETF calendar
standards. Its standards-based features make it easier for users to
share
calendaring information across the network. As standards continue to
evolve and
emerge, iPlanet will continue to support for these new IETF standards.
The relevant IETF calendar standards are:
<ul>
<li>iCalendar (RFC2445)
<li>iTIP (RFC2446 iCalendar Transport-Independent Interoperability Protocol)
<li>iMIP (RFC2447 iCalendar Message-Based Interoperability Protocol)
<li>CAP (draft - Calendar Access Protocol)
</ul>

Does iplanet 6.0 support W3c RDF API?

Hi,
Does iplanet 6.0 support W3c RDF API? We are trying to use iplanet 6.0
for development. Now we have a problem that our codes can't work
successfully when we use iplanet 6.0. Did you have any advice or
experience? Thanks,
Yan.

What are you trying to do? Serve RDF summaries? You should be able to do
that as long as you set the MIME types correctly.
David
Yan Zhao wrote:
Hi,
Does iplanet 6.0 support W3c RDF API? We are trying to use iplanet 6.0
for development. Now we have a problem that our codes can't work
successfully when we use iplanet 6.0. Did you have any advice or
experience? Thanks,
Yan.

Newbie in iplanet "does iplanet supports struts and mysql"

hi
i am a newbie in iplanet , i wish to know that do iplanet webserver 6.0 sp4 supports struts application, as i have a running struts appiication which is deployed on tomcat but its not working on iplanet is there any kind of special configuration i have to do. please help me out

Refer to
JBuilder 5, Struts 1.0 & WebLogic 6.0, a Tutorial
http://www.netstore.ch/mesi/strutsTutorial/
'Struts Example for iPlanet Application Server, SP3'
http://www.icsynergy.com/downloads/struts/strutsHowTo.html
iPlanetApplication Server Installation
http://jakarta.apache.org/struts/userGuide/installation-ip.html
"dan" <[email protected]> wrote:
>
Can anyone tell me how can i implement a struts 1.1 application in the
following
servers:
iPlanet Web server 6.0
iPlanet Application Server
BEA WebLogic Server 7.0

Sync between MacBookPro and iPhone 3G does not sync properly. Calendars duplicate events but worse is that only contacts from Address book from letter T onwards sync. Any contacts on iPhone which are not on Mac are lost during sync.

Sync between MacBookPro and iPhone 3G does not sync properly. Calendars duplicate events but worse is that only contacts from Address book from letter T onwards sync. Any contacts on iPhone which are not on Mac are lost during sync.
Solutions?

No, I never really found an easy solution. I believe it is an issue with some corruption in the iTunes database on the specific device. In my case, both my iPad and iPhone now show duplicate stream songs if viewed through iTunes on my Mac, but they show different songs. A couple years ago I had a similar issue on my iPhone, and Apple support suggested I back up the phone, completely reset it, and then restore it from the backup. It did work, so I imagine it would probably work for my current issues with the iPhone and iPad. But resetting and restoring an iPad or iPhone always makes me a little nervous that something will get lost. When I did reset/restore the iPhone, I do have to say, the restore process was 100% perfect and I did not lose any data at all even though Apple support said I might. If you try to go that route, I would suggest backing the device up both to a computer through iTunes, and to the iCloud so that you have a double backup.
None of this really resolves the issue with how the iTunes databases are becoming corrupted on the apple devices though, so it is very likely to happen again until they fix it. I have been unable to determine if there were any specific actions or conditions which caused the corruption to happen in the first place.
Might be worth another call to Apple support, or dropping in the local Apple store if you have one near by.

Does Mini DisplayPort to VGA adapter support DDC/CI?

I have a Mac Pro and a MacBook5,1.
Mac Pro is attached to a BenQ monitor which supports DDC/CI communication.
With a capable software I'm able to set brightness and contrast of the monitor without using monitor's OSD (thanks to DDC/CI communication).
If I attach the same monitor to my MacBook5,1 with VGA cable through a Mini DisplayPort to VGA adapter, DDC/CI stops working.
I'm no more able to set brightness and contrast and the app reports that monitor isn't DDC/CI capable.
I'm sure its not an issue related to the app that I'm using to set brightness and contrast. It detects correctly both of the monitor (the internal and the external one) and I'm sure that I'm sending DDC/CI commands to the external monitor and not to the internal one.
So, does Mini DisplayPort to VGA adapter support DDC/CI, and therefore passthrough its signal?
Or is it a problem of MacBook and its Mini DisplayPort which does not support DDC/CI at all? I don't think so.
I hope you can help me.
Regards
Andrea

No. Unlike DVI, which in the DVI-I configuration has both digital and analog pinouts, DisplayPort (and mini-DisplayPort) are purely digital. Mini-DP to DVI then DVI to VGA will not work. If you look carefully at the Apple Mini-DisplayPort to DVI adapter, you'll notice it's a DVI-D connector - digital pins only.
The Apple mini-DisplayPort to VGA adapter contains a digital-to-analog converter.
So, you'll have to choose. If you want VGA, get Apple's mini-DisplayPort to VGA adapter.

Calendar 7.0 does not alert me on monthly repeating events

SInce upgrading to an Intel Core i5 desktop running OS 10.9.2, my calendar does not alert me
to monthly repeating events. Especially irritating because I rely on it to pay my bills on time.
Checking settings today, I notice that Alerts is only set to my iCloud account. But both
iCloud and my email are listed under 'accounts.'
After resetting alerts to 'I tried switching off the iCloud account but on reopening
Calendat it defauled to iCLoud again. I tried switching off iCloud but then ALL my
Calendar listings disappeared! So obviously my Calendar sits on iCloud but refuses
to alert me to monthly events.
Help!
Thanks,
Ramon

I just successfully created an event called "Good Saturday" for today (Saturday). It was not a day long event - only an hour long event.
I created a "Good Saturday" day long event for next Saturday and that succeeded.
So I conclude the issue you are seeing must be with the calendar account(s) you are using.
I also run the same build of calendar you have.

It seems like I just missed the interval for the hard disk replacement program. I purchased in March 2009 a 24 inch Intel iMac . How much does it cost to have apple support at an Apple Store replace a hard drive?

It seems like I just missed the interval for the hard disk replacement program. I purchased in March 2009 a 24 inch Intel iMac . How much does it cost to have apple support at an Apple Store replace a hard drive?

My hard drive continually has the floating beach ball and will take massive time to fulfill a request. And then will not boot up...so then I have to do a restore and rebuild hard drive from a past saved time machine version. Works for a little bit...then the floating beachball comes more and more...until it will not boot up again. So then I restore from a previous time machine saved version....and again it works for a day or so ... until it happens again. Now it's happening faster and faster...so I think my hard drive is dying.

SOLVED - BIOS UPDATE "SYSTEM DOES NOT CONTAIN the NECESSARY WMI SUPPORT for this VERSION of HPQflash

If you get infamous error when updating HP Portables (laptops/notebooks/ netbooks) BIOS within Windows:
"SYSTEM DOES NOT CONTAIN THE NECESSARY WMI SUPPORT FOR THIS VERSION OF HPQFLASH":
I am posting a solution found for own business laptop (HP 8540W & 8760W) so WebSearch engines index/register it in a few days - future sufferers come here and get a SOLUTION, finally. Disreagrd previous "experts" advises, they don't work 100% & pity on TechSupport folks who get HP paychecks yet don't know products their co. designs/manufactures (on deep Technical level):
Below is a SOLUTION (WORKING) !
Go into Services (Run "services.msc" or get there thru ControlPanel-->AdminTools-->), find following 2 services ==> make sure they're running, chances are they're NOT (as in my case I keep them disabled unless need running):
1) "HP Software Framework"
2) "HP Service" [no typo - a real plain name]
If not running, set Properties-->Manual and click "Start", make sure both are running.
Rerun BIOS updater, choose option for "Within Windows" or something to that effect (using HPQ/ROMpaq updater), rather than "create USB BootDisk on Key", this time it should work without the hassle of a BootDisk creation.
Should work from within Windows environment.
Notes:
a) Likely only one (1) service is responsible - namely "HP Software Framework" for HPQ Updater to fail, but doesn't hurt to reenable/restart both services.
I in fact am responding to other customers who elect to Update BIOS within Windows, perhaps oldfashioned but to me Boot Updater is more natural & always works regardless of WMI Support.
b) After done, don't forget:
*) Recheck BIOS settings - update may've added new and/or changed old, so rescan tobe sure.
**) Go BACK into Windows-->Services.msc & redisable both aforementioned Services if were originally disabled; or you're a computer Pro, you know what you're doing & like me keep all HP services disabled. The ones we got on EliteBook 8760W are pests consuming system resources, you just enable "Software Framework" when occasional issues emerge with HP softupdate (typically no issues) & redisable after use, rest of services are bloatware - some attempt to overrun Windows Wireless console, some seekout HP Networked printers (Ethernet, Wireless, but not USB), some do this & that - I study/know which one does what and decided to disable all. This is called a "minimalist" philosophy & turns your machine into a fast beast, I recently sold a very obsolete 4-year laptop which however handles 3DMCAD & complex designs/simulations, better new machines out fo a store, as new machines are loaded w/bloatware chocking down resources.
BUT nobody is requiring you to disable anything though.
The solution merely states the fact:
These 2 (or 1) services when not running halt BIOS Update "within Windows" (you can still run "BootDisk option", however, if preferred).
Simply restartung them solves your problem. Usually
Ya'll have a good day and enjoy!
===========
BELOW ARE IMPORTANT WARNINGS:
1) IF YOUR BIOS UPDATE STILL FAILS, SOME OTHER PIECE IN WMI SUPPORT IS MISSING - IN MY CASE WAS THESE 2 SERVICES, BUT THERE'S REMOTE POSSIBILITY SOMETHING ELSE MIGHT BLOCK UPDATER. DON'T WASTE TIME & CHOOSE "USB/BootDisk" options instead
2) Once BIOS updater does its job, will ask to auto-restart - let it go on & complete, it will self-shutdown (click "Next" to skip 60-second timer), then do NOT turn it on manually!, wait - it'll turn on by itself in 15 seconds, let it boot into Windows, you're done!
3) WARNING: close other apps before proceeding, be 100% sure your ACpower won't be interrupted or better yet - make sure battery is in/charged (so if ACpower accidentally disconnects, you're autoswitched onto battery) b/c power loss may result in severe damage to internal hardware. In the old days it'd result in fatal damage, these days powerloss would still result in a major repair (ROM chip corruption).
So to summarize: those 2 services I specified, are often responsible for whether HPQ/ROMpaq will or won't run.
Other causes possible, but I've not witnessed; and if so - choose BootDisk option.
===
Stan M. Starinski, MSEE.

Hello Ceramics.
Your ProBook is an Enterprise model. It would be a good idea to also post your question to the HP Business Boards as those forums deal specifically with that kind of product. Here is a link.
Have a great day!
Please click the white star under my name to give me Kudos as a way to say "Thanks!"
Click the "Accept as Solution" button if I resolve your issue.

Does OS Lion 10.7.5 support Airplay mirror of Apple TV 3? I can't find the option in Setting Display on my mid 2012 MacBook Pro.

Does OS Lion 10.7.5 support Airplay mirror of Apple TV 3? I can't find the option in Setting>Display on my mid 2012 MacBook Pro.
I've rebooted all 3 devices, still does not work. Both Apple TV and MBP are on the same wifi. And the Apple TV AirPlay option is on. Can someone help? Thank you.

About AirPlay and Airplay Mirroring
AirPlay Mirroring requires a second-generation Apple TV or later, and is supported on the following Mac models: iMac (Mid 2011 or newer), Mac mini (Mid 2011 or newer), MacBook Air (Mid 2011 or newer), and MacBook Pro (Early 2011 or newer). For non-qualifying Macs you can try using Air Parrot.
Several Apple Articles Regarding AirPlay
Apple TV (2nd and 3rd gen)- How to use AirPlay Mirroring
How to set up and configure AirPort Express for AirPlay and iTunes
About AirPlay Mirroring in OS X Mountain Lion
iTunes 10- About playing music with AirPlay
Troubleshooting AirPlay and AirPlay Mirroring
Using AirPlay
Thanks to the $15 Beamer, AirPlay streaming is still possible on Macs that do not support Airplay and mirroring.
Another solution is the Air Parrot.

Does Adobe Flex 4.6 SDK supports multithreading?

Hi,
As we are using Adobe Flex 4.6 sdk for our vmware vcenter plug-in development. we need to handle the situations like updating the data in multiple panels and portlets of a dashboard simultaneously.
So we are thinking to implement this using multithreading concept.
I am hearing flex doesn't support multi-threading, some workers constructors will give flavor of the multi-threading in flex.
It will be helpful if you provide some information about
1. Does Adobe Flex 4.6 SDK supports multithreading? If so how to implement?
2. How to use Workers in flex and what are the limitations?
Thanks and Regards,
Sravan Kumar.

https://forums.adobe.com/message/4562551

Does USD NACHA CCD Plus Format support one single payment with one vendor?

Hi,
We are implementing USD NACHA CCD Plus Format file for my customer.
Have the following query:
Does USD NACHA CCD Plus Format support one single payment with one vendor and another single payment with
different vendor in single file or will it generate two files for two payments or will it support single payment only.
Can anyone help us in this regard.
Thanks,Venkat.

I have created one invoice1 with one vendor and another invoice 2 with
different vendor processed the PPR using USD NACHA CCD Plus Format .
Both two payments came single file.
But we know that USD NACHA CCD Plus Format support Single Payment only.
Can anyone help us in this regard.
Thanks,Venkat

Does adobe reader for android/ios support digital signature?

does adobe reader for android/ios support digital signature?

when to support digital signature in adobe reader for android/ios?

Does iPlanet 5.1/5.2 supports event change notification ?

Similar Messages

Maybe you are looking for