Does iplanet 6.0 support W3c RDF API?
Hi,
Does iplanet 6.0 support W3c RDF API? We are trying to use iplanet 6.0
for development. Now we have a problem that our codes can't work
successfully when we use iplanet 6.0. Did you have any advice or
experience? Thanks,
Yan.
What are you trying to do? Serve RDF summaries? You should be able to do
that as long as you set the MIME types correctly.
David
Yan Zhao wrote:
Hi,
Does iplanet 6.0 support W3c RDF API? We are trying to use iplanet 6.0
for development. Now we have a problem that our codes can't work
successfully when we use iplanet 6.0. Did you have any advice or
experience? Thanks,
Yan.
Similar Messages
-
Does iPlanet proxy3.6 support dayofweek and timeofday in ACLs
I tried using dayofweek and timeof day in ACLs so as to allow some users access to Internet during particular time of a day. But when I start the proxy server I get an error stating syntax is not proper. Can anyone tell me if these can be used in ACLs for proxy server. I tried adding the ACLs to generated*.acl. If these can be used can anyone let me know the proper syntax and also if I have to create a separate acl and refer to it in magnus.conf?
OS Solaris7
Proxy: iPlanet Web Proxy Server 3.6Hi,
NES3.6 is supported under WLS6.0. Could you please put the part of obj.conf
file to proxy request here?
Thanks
Yu Tian
"Benjamin Hyatt" <[email protected]> wrote in message
news:[email protected]..
>
Having a problem getting libproxy to function properly on nes 3.6
Added the proper entries for the plugin in obj.conf; reloaded.
Nes instance starts up fine. If I attempt to access the url (i've definedby
ppath) the app server never get's hit. It's as if the plugin is beingcompletely
ignored.
I've set Debug="ON" hoping to see wlproxy.log in /tmp.... nothing.
I've done this very easily before with wl 5.1.0 and iplanet.
Does the 6.0 sp2 proxy plugin support nes 3.6?
Platform
Solaris 2.6
Any info is greatly appreciated.
Thanks,
/Ben -
Does iPlanet Portal Server support ipsec (IP Security Protocol)
IPSec operates at the operating system level, not the application level. Solaris 8 supports IPSec so you can use iPSec to set up tunnels between the gateway and the profile server to secure the connection.
Does this answer your question?
Kent -
How does iPlanet Portal server support authentication to NT domains/workgroups?
I would recommend reading this ..
http://docs.iplanet.com/docs/manuals/portal/30/ag/authctn.htm#754920
One thing that is not specified in the document, you would also need to install samba that comes as a part of the 3 rd party cd toolkit. -
IPlanet v5.0 support LDAP protocol v1?
Does iPlanet v5.0 support LDAP protocol v1?
Trying to test iPlanet Directory Server 5.0 without success. Netscape
Directory Server versions 4.11 and 4.13 operate with no problem.
-- JimNo.
Elaine Julius wrote:
Does iPlanet 5.0 LDAP support transaction control? That is, is there a
way to ensure that a number of directory operations either all
complete succesfully or all fail?
Thanks
Try our New Web Based Forum at http://softwareforum.sun.com
Includes Access to our Product Knowledge Base! -
Does iPlanet Calendar Server 2.x (iCS 2.x) support IETF iCalendar
standards?
<P>
iPlanet Calendar Server was designed from the ground up to support
IETF calendar
standards. Its standards-based features make it easier for users to
share
calendaring information across the network. As standards continue to
evolve and
emerge, iPlanet will continue to support for these new IETF standards.
The relevant IETF calendar standards are:
<ul>
<li>iCalendar (RFC2445)
<li>iTIP (RFC2446 iCalendar Transport-Independent Interoperability Protocol)
<li>iMIP (RFC2447 iCalendar Message-Based Interoperability Protocol)
<li>CAP (draft - Calendar Access Protocol)
</ul>Does iPlanet Calendar Server 2.x (iCS 2.x) support IETF iCalendar
standards?
<P>
iPlanet Calendar Server was designed from the ground up to support
IETF calendar
standards. Its standards-based features make it easier for users to
share
calendaring information across the network. As standards continue to
evolve and
emerge, iPlanet will continue to support for these new IETF standards.
The relevant IETF calendar standards are:
<ul>
<li>iCalendar (RFC2445)
<li>iTIP (RFC2446 iCalendar Transport-Independent Interoperability Protocol)
<li>iMIP (RFC2447 iCalendar Message-Based Interoperability Protocol)
<li>CAP (draft - Calendar Access Protocol)
</ul> -
Does iPlanet 5.1/5.2 supports event change notification ?
Does iPlanet 5.1/5.2 suports event change notificaiton? I did query against root DSE, but 2.16.840.1.113730.3.4.7 does not show up as supported control. Just enable the change log does not help.
What is the proper way to get entry change notificaiton work on iPlanet 5.1/5.2?
Thanks.Could you perhaps use persistent search? Doing persistent searches with ldapsearch is described a bit in http://docs.sun.com/source/816-6400-10/lsearch.html
HTH,
Mark -
Does Photoshop CC not support touch on Windows 8.1 tablet?
Does Photoshop CC not support touch on Windows 8.1 tablet? Stylus nor finger working on canvas. Have all the updates from Windows and Adobe.
Photoshop does not have touch support. however some touch devices drivers have features the can be set to Photoshop Functions. For example
Tablets that have drivers that use Wintab API for pen support can be used with Photoshop Brush Pen support. Tablets that use Microsoft Ink API for pen support can not be used with Photoshop for Adobe does not have support for Microsoft INK API for Adobe states the INK API lack features used by Photoshop Brush engine. -
MQSeries 5.2 still support old Java API 1.1.8 ?
We are using MQseries 5.1 and java 1.1.8. now we are upgrading to MQseries 5.2, do we need java 1.2 or 1.3.
does the MQSeries 5.2 still support old Java API 1.1.8 ?
thanks
RupinderNot according to the documentation which says MQSeries 5.2 has a dependency on JDK1.2.2 or later.
Having said that, I have managed to get some JMS functions to work under JDK1.1.8.
I have had a problem when using JMS to GET a message from our mainframe QMgr but not from our Unix QMgr. This runs ok when using JDK1.2.2,
Regards
Chris -
Does LDS 1.1 Support use-defined functions?
Does LDS 1.1 Support use-defined functions? I'm working with the W3C use case
REL Q12 which fails with the function, but succeeds if I "inline" the function.LD 1.1 does not support User Defined Functions. This feature was omitted for performance
reasons.
- Mike
"Mark Maxey" <[email protected]> wrote:
>
Does LDS 1.1 Support use-defined functions? I'm working with the W3C
use case
REL Q12 which fails with the function, but succeeds if I "inline" the
function. -
What version of UNICODE does JDK1.4.2 support?
What version of UNICODE does JDK1.4.2 support? Is it UNICODE 3.0 or 3.1?
http://java.sun.com/j2se/1.4.2/docs/api/java/lang/Character.html
Character information is based on the Unicode Standard, version 3.0. http://java.sun.com/docs/books/jls/second_edition/html/lexical.doc.html
Intrest only: 1.5
http://java.sun.com/j2se/1.4.2/docs/api/java/lang/Character.html
Character information is based on the Unicode Standard, version 4.0. -
Does ACR1281U-C1 cards support Java Card?
I just got my self an ACS Card reader for ACR1281U-C1 cards, but I don't know how to install my cap file onto the cards. I've read the documentations, but failed to find any hints. Does this cards even support Java Card?
andirady wrote:
The cards came with the reader.Then my bet these are either Mifare 1K (if they have no contacts), or one of these
http://www.acs.com.hk/index.php?pid=products&id=1
and AFAIK, none are Java Card cards.
What about
- telling if the cards have contacts or not;
- posting the ATR that the reader gives for the card, in contact and contactless mode as applicable?
The later could be interpreted according to the info in the spec, circa page 33.
http://www.acs.com.hk/drivers/eng/API-ACR1281U-C1-1.03.pdf -
Does the 6600GT-VTD128 support video capture?
Hi,
I recently purchased an MSI 6600GT-VTD128 video card. The product information seems to suggest that the card has video input capabilities, and there is an adapter that plugs into the card that has a number of connections, one of which is labeled S-Video in. However, I haven't been able to get any video capture to work.
Does the card actually support this functionality? If not, what are the video input connections for? If so, is there some documentation as to how to set it up?
So far, I tried installing the video capture drivers that come with the card. I checked the manual. I checked the MSI web site FAQs. And I searched the forums.
Any help would be greatly appreciated.
Thanks,
DanielThanks Richard. Yes I do have a breakout cable like that. Actually, I described it in my original message. So, I am guessing from your message that you believe that the card should have the capability to capture video.
In my original message, I asked if there was any documentation on setting up the card for video capture. The manual does not describe the procedure, nor does the MSI web site.
There are drivers on the CD that claim to be for video capture, but they had no effect when I installed them. In fact, there appears to be no way to tell whether the drivers were actually installed successfully.
If anyone out there has successfully used this card for video capture, please let me know. -
I have the oringinal ipad, it does not seem to support ios6 and will not connect to itunes, WHY is this?
Start here... http://www.apple.com/support/iphone/assistant/itunes/
-
Does Sender Mail Adapter support "PayloadZipBean" module
Hi everyone,
I have a scenario where, I get the email with an zip file as an attachment and I need to extract this file and send across. There is no mapping transformation done here, only I need to forward the attached file to the file server.
Zip file always contains 1 file and is a text file.
so Its an Email to File Scenario.
Can I send the zip file as it is without unzipping i.e., send the attachment as iit is to the file server?
If I want to unzip the file, does the module "PayloadZipBean" support in case of sender mail adapter. ?
Thanks,
VarunHi Varun,
Use "PayloadZipBean " Module at Receiver Communication Channel in the Module Tab Set the "Module Key.mode = unzip"
and Receiver communication Channel file should be "FileName.txt".
http://help.sap.com/saphelp_nw2004s/helpdata/en/bd/c91241c738f423e10000000a155106/frameset.htm
Regards,
Naga.
Maybe you are looking for
-
New iPad Air 2 not avail as SMS forward option on 6Plus
Hi! I'm sure I just don't have some random setting correctly, but can't figure out which one it is! I purchased a new iPad Air 2 the other day and went through the activation/backup restoration process with no issues. HOwever, as I was sitting here
-
I'm trying to generate XML files on a client machine. I'm using SQL*Plus Instant Client v 10.1.0.4.0 connected to DB version 10.1.0.3.0. I've created a view of XMLType and am able to select XML from this view. I've been unable to figure out a way to
-
What are the differnce between query pld and query wizard in sap b one 2007
-
How can obtain a row from an attribute
Hi, i´m doing a smart project and i need only one row, how can obtain it? The row i want obtain it from an attribute. Thanks,
-
EPM 11.1.2.0.0 Install
Hi All, Has anyone install planning / essbase 11.1.2.0.0 on windows 7 64bit. Thanks!