Does ipod classic can play any video file asside to mp4?how?

does ipod classic can play any video file asside to mp4?how?

The following is what Apples iPod Classic Specs page lists. You can convert videos to compatible formats by using a free app called HandBrake.
H.264 video, up to 1.5 Mbps, 640 by 480 pixels, 30 frames per second, Low-Complexity version of the H.264 Baseline Profile with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; H.264 video, up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Baseline Profile up to Level 3.0 with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; MPEG-4 video, up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Simple Profile with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats

Similar Messages

  • Please help - Ipod freezes when playing any video

    Hi
    I only got my ipod video a day ago and it wont play any video files. Everytime i go to play a video it freezes and just shows a black screen. I have tried downloading a music video from the itunes store and this wont work either. When i first got it i did play one video, im not sure if this was before i updated the firmware though?
    I cannot figure out how to reset the firmware if this is what i need to do?
    I would really appreciate some advice.
    Thanks in advance.

    I just got my iPod like two months ago and it wouldn't play any video podcast until I downloaded the new iTunes software. Now it plays some video podcasts but not all. I tried to watch some new podcasts I had downloaded from iTunes and it would play some of it then just freeze and make these wierd sounds. I tried again and it totally froze where I couldn't do anything, not even turn it off. It stayed that way until the battery was completely drained then it turned itself off later that night. The next morning I charged it up and it worked fine but I still can't watch those podcasts. Please help, cause this thing is pretty much brand new and for the amount of money I spent on it I don't want it to start giving me problems after only two months.

  • 30GB 5G Ipod no longer plays any video -HELP!

    I have a 5G ipod purchased toward the end of 2005. It always worked great until I went to play a video the other day. My ipod crashes every time I try to play any video, whether downloaded from itunes, homemade, anything. This isn't an issue of needing to turn the TV-Out setting off. I've tried restoring, reverting to previous firmwares (from 1.2.1 to 1.1.2 and 1.0, using itunes 7.2), formatting and restoring, everything I've seen on forums everywhere. It used to play video just fine, so I'm completely at a loss. If I select a video through the audio podcast area, it will play the audio portion. When I try to play videos properly, the screen stays blank and no longer accepts input - I have to reset the ipod. I know that I'm out of warranty so I'm probably boned, aren't I?

    I just purchased my 30gb video iPod, and am running into almost the exact same situation. The only difference is that I don't have to reset it. It just won't play a movie at all. It starts the little "timer" thing that clicks around, but then goes back out of the movie. I know the movie is a good download, because I can watch it from start to finish within iTunes.
    Anyone got any ideas? I really don't want to stay on hold for 1-2 hours waiting on a person to talk to with tech support!
    HP 7160n   Windows XP Pro  

  • ITunes closes when I try to play any video file.

    I purchased a movie in the iTunes store. Now when I am in iTunes all the audio files work fine (music, podcasts, etc) but any video file takes me to a black screen and a popup that says "iTunes has stopped working". I tried opening the files in Quicktime media player but received an "unknown error". I was able to to download the movie from the cloud and play it with no problems.
    Originally this happened whenever I opened iTunes but after reinstalling it the issue was limited to videos.
    I have reset proxy settings in case it was an issue with the iTunes store
    I have tried various playback resolutions
    I am using windows 8 on an Acer Aspire V3
    16 GB RAM and 1 TB HDD
    I have update iTunes and Quicktime.

    Hello, jonahrnhrt.  
    Thank you for visiting Apple Support Communities.  
    I understand that iTunes quits unexpectedly.  Here is the troubleshooting article that I would recommend going through for this specific issue.    
    iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
    -Jason H.  

  • Can my ipod classic 160gb play HD videos?

    I did some research on it but havent had any luck. If I remember correctly I had to purchase SD movies from itunes in order for them to playable on my ipod but I can't say for certin. any helpful input would be appreciated.

    Your iPod cannot play HD videos.  However, if you purchase an HD video in iTunes, I believe you can also download the SD version at no additional cost.

  • Windows 7 Crashes/Freezes when playing ANY Video files

    lets see can anyone get their head around this one as it is driving me round the bend. 
    So... I have a media centre PC connected to my HDTV by VGA cable. I ran the PC on XP for a long time but last December, I upgraded it to Windows 7
    along with my laptop. 
    Cue 5 months of seamless media usage and network integration - it
    worked like a dream and I played both HD and SD content with ease. 
    About two weeks ago, I was watching an HD '.mkv' file in Windows Media Centre and about 10 minutes into the video, the video file just Froze - both the video and the audio. I had to power down and restart the machine and started the video file again. About
    5 minutes after re-starting the video file, it hung again (not at the same place in the video). I then went and watched the video on my laptop where
    it worked fine. 
    A few days after this (first time I had used it again since it hung up) I began watching an SD '.avi' file. About 1 minute into the video the display lost it's signal (the little built in 'no signal' graphic came up) and after a further 15 seconds, the audio
    cut out as well. 
    This latter behaviour is now happening every single time I try to watch any kind of SD or HD video of any file extention. This problem is also independant of what video player I use (windows media centre and windows media player classic) After a minute or so
    the display cuts out and the audio quickly follows it. 
    Suffice to say, I was a little annoyed but knowing a good bit about computers I
    decided to try and solve the problem taking the following steps. 
    1) I uninstalled all my codecs and reinstalled the latest version of the K-Lite Codec pack. The latest version has support for windows 7 so I doubt its a compatibility issue here. After doing this the problem still persisted, exactly the same as before. 
    2) I checked the date of the drivers for my video card (MSI nVidia 6200) and seen that they were dated sept 2009. I went onto the nVidia site and found the latest win7 drivers dated april 2010 - I installed these but still the problem is there. 
    3) I then thought, maybe its a problem with the actual video card hardware itself. When I built my machine the parts supplier accidentally
    sent me two of the same video card so I swapped out the existing one for a brand spanking new version of the same card. The problem is still EXACTLY the same. 
    So yes -I am rather annoyed and frustrated at the moment as I have absolutely no idea what is wrong with the machine and how it went from working to not working almost overnight. 
    I'd like to add also that the display is perfect when doing anything else on the computer - I can surf, play youtube videos, listen to music etc and it is absolutely no problem. 
    Put on a video and it cuts out the display like I have explained. 
    halp.

    Hello Tim,
    I decided to do a clean install, a fresh new installation of windows and all its updates, I didn't get the option of
    install SP1 yet.
    After that I only installed Catalyst drivers: 11.5 and Realtek HD audio drivers, all downloaded on May 24 2011.
    Then latest FFDShow and MPC-HC to test, both x64 versions Nothing else installed.
    Only a fresh copy of windows with its updates and those mentioned drivers.
    To my surprise, it happened a gain.
    It still crashes after a while when playing MKV videos.
    It's weird, because it doesn't happen with avi's or mp4's.
    So, there must be something wrong with one of windows updates that creates this windows FREEZE.
    Also there is no possibility to find out what error it is in "Event Viewer" as nothing gets recorded there. Anyone could
    advise?
    Thanks

  • Quicktime will not play any video files

    When trying to play any compatible video files .mov, .mp4 etc... all I get is a small black box in the upper left corner of the screen. The computer is not frozen I can close the window with the red x. I can open Quicktime and the web stuff opens but opening a video file on the computer causes this. I confirmed the latest version of Quicktime in installed and I have confirmed the video files I'm trying to play work on another computer and the .mp4 file plays in media player on this computer. The video card driver is up to date. I want to play my .mov files from my iphone but can't.

    all I get is a small black box in the upper left corner of the screen.
    Curious ... I wonder if this is a blown-out display preference?
    Could you check something for me please? Create a new user account on the PC with full sdminidtrative rights. Log out of your usual account and log into the new account. Try playing a file in the new account. Does it display properly?
    If it works okay in the new account, let's try to get things working in the normal account again with the instructions from the following thread:
    http://discussions.apple.com/thread.jspa?threadID=2637322

  • Ipod classic won't sync video files

    I have .mov and .m4v and .mp4 video files that used to work perfectly with my ipod but now I get the message that "x wasn't synced with your ipod because it was not compatible"  Extremely annoying.  I have checked teh bit rates etc and they are al withing what the spec says the ipod will play.  Indeed I have older files of the same type that it plays fine but not these newer ones.
    Help

    Are these videos from the iTunes store or imported from outside of iTunes?  If they were imported from outside of iTunes try using the iTunes built in converter to try and convert the videos to an even friendlier iPod format.  To do this, highlight the video and choose Create iPod or iPhone version from the Advanced drop down menu.
    More troubleshooting can be found here.
    http://support.apple.com/kb/ts1497
    B-rock

  • I had bought wi-reader and can play video format like .mp4 directly from hard disk attached to wi-readerbut just wondering if I can play other video file from device like avi.

    Pls advise

    Well, in my opionion, you've moved things around so much, it would be better to just clear your current iTunes library and rebuild it.
    IMPORTANT - I am talking about clearing the iTunes library file, not deleting song files from your hard drive.
    I personally never use WAV files, because I like the tags that come with MP3. I'm a pleasure listener - I don't need WAV files for professional reasons.
    When I first got iTunes, yeah, I took the default settings and ripped all my CDs in AAC format (they have .m4a file extensions). I regret this, in one way, because they won't work in other Windows applications & other portable devices. But, they sound great on my iPod and don't take up so much drive space as other formats.
    edit: I've no idea what you're talking about with the GraceNotes vinyl lookup. AFAIK, you're going to have to re-rip the CDs in a non-WAV format to get the ID3 tags. But you can google to find more info on that.
    Message was edited by: Katrina S.

  • IPod Classic will play movies/videos, but no music whatsoever.

    Just recently got the iPod, secondhand, and had it restored and synced with my computer. I put all of my movies and music on it, which did not take up much space at all, and none of the songs will play. And this goes for both purchased and non purchased songs. they stay for about 5 seconds and then skip. However, all of the videos work.

    Hi there,
    I would recommend that you take a look at some of the troubleshooting steps found in the article below.
    Troubleshooting songs that skip on iPod
    http://support.apple.com/kb/TA26488
    Hope that helps,
    Griff W.

  • My ipod 4th generation won't play any videos on any browser and YouTube

    My ipod won't play any videos on safari and every other browser I downloaded. It won't even play videos from YouTube and YouTube the ap.

    Many videos via Safari require Flash and will not play on the iPod.
    What exactlyhappens when you try to use the YouTube app on the iPod?
    Try
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    Deleting the and reinstall the YouTube app
    - Go to Settings>Safri and Clear Cookies, Data and History
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                                
    iOS: How to back up                                                                                     
      - Restore to factory settings/new iOS device.

  • How to play SCM video file on Mac

    is there any way i can play scm video file to the macbook? please help me out

    Never heard of an scm video-so I googled it.
    It is either a console video game ROM emulator, a superchain video file(which means DRM) or a Starcraft map file.
    Only hint for playing the superchain one was use a windows machine, windows media player with some obscure plugin for .scm playback.
    I'm afraid since this is a very obscure format/codec-you may be out of luck.

  • Bug?? v4.5 Media Player doesn't play 3gp video files.

    I recently upgraded my 8330 to v4.5 and now cannot play any video files.  Before the upgrade, at v4.3 the same video file could be played.  I reloaded the device software, reformatted the microSD card, recreated the video file and even completely wiped the device.  Nothing..
    any advice or am I stuck?  Is there anyway to go back to v4.3?

    Check this link: Blackberry OS FAQ
    There are instructions how to downgrade your Blackberry OS, and there are links to download necessary software.

  • DynamicLink Media Server is not available. I can't open any video file in Photoshop CC and when it does, Photoshop freezers and I can't do anything else. I'm using OS X 10.9.4-3.1 GHz Intel-16 GB DDR3. Any help please?

    DynamicLink Media Server is not available. I can't open any video file in Photoshop CC and when it does, Photoshop freezers and I can't do anything else. I'm using OS X 10.9.4-3.1 GHz Intel-16 GB DDR3. Any help please?

    Indicas que no puedes abrir ningun archivo de video, se supone que has probado varios formatos, mp4, mov,..
    Has actualizado el OSX a 10.9 ?, funcionaba antes? La versión de Photoshop es la CC, no la CC 2014?
    En el menú de Ayuda>Actualizaciones, cual es el resultado, dice que esta al día?
    Tienes abiertas otras aplicaciones?
    Prueba a cerrar todo, espera media minuto y abre Photoshop a ver que ocurre.
    (Estas utilizando un MacBook Pro?)

  • Ipod Touch:  Does it have problems playing Apple Lossless files?

    Hi All
    This might sound like a strange question to some of you but considering the hassles I am having with the 120gb classic it isn't.
    To make a long story short my 120gb classic cannot play Apple Lossless files properly. Essentially they crash the ipod because the files are too large. I have done some research and on many forums people are experiencing the same problem.
    I do find it quite offensive that Apple do not have the courage to admit this is a problem but there is nothing I can do about it.
    So my solution is to get rid of my 120gb classic and move to a Sony or Cowon player (still doing research to make sure they can handle lossless (not apple) files).
    However i really do love everything else about the ipod so I would love to find a way to keep it.
    I figure maybe the new ipod touch's might not have this problem because they are solid state and if that is the case then I can stump up for one of those and keep with the ipod brand.
    Does anyone know if the Touch's can deal with these large files? Apparently the problem with the old 120gb classics was the small 64mg cache. Hopefull the Ipod touch doesn't have this issue.
    Anyway any help would be appreciated.
    Thanks
    Eddie

    If I went with an Ipod touch it would be a newer so I guess it would have the newest OS on it.
    I'll wait awhile longer and do some more research before I take the plunge because I do not want to get ripped off like I did with the 120gb Classic.
    Thanks for the reply though. At least it is leading into the right direction!
    Eddie

Maybe you are looking for

  • Trying to restore from migration assistant to 2nd drive...

    I recently got a Mac Mini server with 2 500gb HDs. Coming from my old mac pro I was able to successfully migrate everything except my itunes library to the system HD (not enough space). My itunes was too big to fit on the 500gb drive so I'd like to m

  • HT5622 I need to edit my payment details for iPhone 3

    I need to edit my payment details for iPhone 3 in app store ?

  • Extending LOV that is used in multiple places

    Hi, I am planning to extend organization VO in iRecruitment (vacancy creation) to restrict the LOV based on organization type. This LOV is very common and is using in multiple places in he application. I am new to this and i need to know that by exte

  • How to move data between two similar tables?

    Hi All, I have two tables with almost the same columns. Table A has 50 columns, Table B has 51 columns, which are defined exactly the same except one more column as LOAD_TIME. Is there any easy way for me to move the data from Table A to B? the Extra

  • Help I Have A Problem With Nokia Software Updater

    Hi I have This Problem With My Software Please Show Me any Way To Fix it Note 1*:I Used This Software  on thisComputer but when i chang my windows it doesnt work Note 2*:after that when i used software (once time) it didnt work because of that i chan