Does Ipod Nano 4th Gen charge in the iHome iP9?

I know it says all ipod nanos first off, but I have seen many reports where older or even some newer accessories will not charge the new ipod nano 4th gen. If someone could please confirm or deny it does charge it.
Thanks for your time.
Message was edited by: soccersweeper225

http://www.ihomeaudio.com/products.asp?productid=10308&deptid=1006
Mouse over the 4th gen Nano at the end, so it will charge it, along with the iPhone 3G and 2nd Generation Touch.

Similar Messages

Plugging Ipod nano(4th gen) in for the first time... Help

I have the ipod nano 4th gen. I plugged it into the computer for the first time, and itunes comes up. It then says you can register now or later I just clicked later(I am actually doing this for my sister, I have and ipod touch that I did the same with) But anyways, I clicked register later, and then it tells me that I have to Read and agree to the software(or something on that order) So I read through all of that and at the end, there is a box you can check to say that you have read and agreed. I did that, but then you have to click a button to confirm/continue im guessing. Well, my problem is, that my computer screen is too small for me to see the button, in other words, I cant confirm/continue and am stuck there, I cant do anything else with the ipod with out continuing this step. I have tried to Maxamize the screen and dragging over. nothing seems to work.
Is there any other day to agree and confirm to this? If there isn't, is there a way that I can get to the confirm/continue button?

I changed my screen resolution to 1024 x 768,
yet I still cannot see the confirm/continue option.
I have tried all screen resolutions,
and I'm not able to see the button.
Am I doing something wrong?
I really need to know,
because I need to use my iPod.

Does iPod nano 4th gen have Bluetooth?

Does iPod nano 4th generation have Bluetooth capability?

Unfortunately, it doesn't support Bluetooth. You may buy a Bluetooth adapter, and it won't necessarily be that bulky. I'm sure you can figure out how to connect then. If you need help in connections with an adapter and Bluetooth speakers, this may help, too:
http://science.opposingviews.com/hook-up-bluetooth-headphones-ipod-nano-9149.htm l

Can I use my Ipod photo 4th gen charger with the 120gb classic?

My new 120gb classic will arrive shortly, I notice Apple don't include chargers anymore. Will the mains charger I got with my old 60gb ipod photo also work with the new classic or do I have to buy a new one? I notice the charger on sale via the apple website looks a bit different to my old one.

If you old charger is a USB (+5V output) it will work. If it is a Firewire charger (+12V) then I think it will still work, but Apple has removed Firewire charging from most of the new iPod lines including the iPhone and 4th Generation Nano. However I think that the 120GB Classic may be the last iPod to still charge off Firewire chargers.
It won't hurt anything to try it. If it doesn't work, you will get a screen display that states that the accessory is not supported or something to that effect.
Good luck,
Patrick

FM transmiter that CHARGES iPod nano 4th gen

Hello.Well after the clickwheel crapped out on my girlfriends ipod nano 4gb 1st gen decided to get her a ipod nano 16gb 4th gen (pink..shes a girl:) for her birthday.So that's all decided.Now I start researching what fm transmitter to get and see a problem that many folks have...the fm transmitter DOES NOT charge the ipod. I come to you guys for suggestions.I did look at some like griffins' itrip line and while it said it is compatible i have seen reviews that said it does kick out an fm signal and does work in that respect BUT does not charge the unit which would suck.Please tell me what models you guys are using and if they are working for you.Any help would be appreciated.

Thank you for the reply. I sent an email to griffin and in the reply they stated that all the products that say they work with ipod nano 4th gen....will work with that version. I just get a feeling like I am going to be returning it to the store after buying it.I have no worries about it actually transmitting an fm signal but charging..thats another story. Will update when I find out.

HT3215 Hi, I just got my new iPod Nano 4th Gen. and the screen is blank... It's not on and its plugged into my Mac OS X Mountain Lion. I don't know what to do. Help!?

Hi, I just got my new iPod Nano 4th Gen. and the screen is blank... It's not on and its plugged into my Mac OS X Mountain Lion. I don't know what to do. Help!?

If it is plugged into a USB hub (or the spare keyboard port), try connecting it to a direct USB port.
Also, try doing this Reset procedure, while it is connect to power.
http://support.apple.com/kb/HT1320
NOTE: A new iPod nano is 6th gen.

HT3310 i have a problem with the headset of my ipod nano 4th gen. the right side don't have a sound. It comes in and out. what do I need to do?.. I am using the original headset eversince. I took it to an Apple Mac Center I was told they can't do anythin

I have a problem with the headset of my ipod nano 4th gen. the right side don't have a sound. It comes in and out. what do I need to do.. I am using the original headset eversince. I tool it to a Apple Mac Cennter and Taked with a Service Center Rep. And he told me that they can't do anything because they don't repair the ipod they didn;t even look at it. I was told instead to buy a new one. I was very disappointed.. This is already my 5th ipod though i am planning to buy a new one.. I still want it fixed so I can give it to my little sister

From the OP: "My old computer got a virus and when that happened all my music was lost. "
They don't have the music on their computer so they cannot transfer the iTunes folder, from the computer to their iPod and then to the new computer. And if they try to enable disk use on the iPod it will erase all the music that is on it. The method you cited is moving the files in a data format using the iPod as a flash drive. It doesn't work if they are in music format. That is why I suggested Yamipod.

How much will it cost to replace the click wheel on my ipod nano 4th gen?

how much will it cost to replace the click wheel on my ipod nano 4th gen?

Depends on whether you have Apple do it or a third party repair company (which will be much cheaper). Here are Apple's repair quotes.
http://www.apple.com/support/ipod/service/prices/
B-rock

HT1605 when i'm not using it it turn off and won't turn on so i have to reset my ipod nano 4th gen just to turn it on. what will i do? is there something wrong with my ipod? is it ok to reset the ipod always?

when i'm not using it it turn off and won't turn on so i have to reset my ipod nano 4th gen just to turn it on. what will i do? is there something wrong with my ipod? is it ok to reset the ipod always?

when i'm not using it it turn off and won't turn on so i have to reset my ipod nano 4th gen just to turn it on. what will i do? is there something wrong with my ipod? is it ok to reset the ipod always?

What will happen to the battery if i let my Ipod touch 4th Gen charging for 8 hours?I'm editing and fixing my ITunes in my P.C,and It's two days old.Thank you.

What will happen to the battery if i let my Ipod touch 4th Gen charging for 8 hours?I'm editing and fixing my ITunes in my P.C,and It's two days old.Thank you.

Make an appointment at the Genius Bar of an Apple store. If under warranty, as you say (the warranty is transferable) and not abused Apple will exchange it at no cost.
Apple Retail Store - Genius Bar

IPod Nano 4th Gen - Stuck on Apple logo

After not using my iPod Nano (4th Gen. 4GB) for about 4 months, I try to turn it on to find it isn't responding. I figured it was completely dead, so I plug it into my computer to see an Apple logo appear on the screen, and I leave it to charge for about an hour. After charging, my computer still didn't register any usb device. When I disconnected it was stuck on the apple logo. After waiting for a while it was still on Apple logo.
So, I did some reading and put it into disk mode. Once in disk mode it was recognized by my computer, and I promptly restored it. After it was restored I reset the iPod. But, again it was still stuck at the Apple logo screen.
I have repeated this process three times, and each time I reset it after restoring in disk mode, the iPod is stuck at the Apple logo screen.
Any ideas as to why it is doing this?

his is not operating system-specific, but I want to get it on the record somewhere since I could not find the solution anywhere else.
Last week, my third-generation 30GB iPod refused to go beyond the Apple logo on startup. It would power up, flash as if trying to go to the menu, but instead it would just show the Apple again. I tried all the usual recovery methods: resetting (hundreds of times and a couple of different ways), disk scans from the diagnostic menu, restoring with the latest iPod software and with an older version, fsck, using Disk Utility to repair and erase, Disk Warrior, letting the battery drain, everything.
Nothing worked ... until I used Disk Utility to reformat the disk with the "Zero Out Data" option (in the Security pop-up) enabled. This, apparently, reformatted the drive in such a way as to account for bad sectors. It took about an hour.
After that, I restored it with the latest iPod software, and to my delight, it booted normally. It now works fine.
Found that on web mite help you.... but i dont have a mac

IPod nano 4th gen - Apple Mobile Device Driver issue

I have an iPod Touch that connects and syncs perfectly with iTunes but I can't find any way of doing the same with my wife's iPod Nano(4th gen).
Whenever I connect the nano it appears under Universal Serial Bus Controllers as Apple Mobile Device USB Driver but with the dreaded Yellow Exclamation mark.
I've tried:
The 5Rs
Different cables
Different ports
Disabling drivers
Uninstalling drivers
Removing all Apple software (in the correct order) and reinstalling
The only error message I get, other than the Exclamation Mark, is when I check the Driver Properties, it shows "This device cannot start. (Code 10)".
If I click on Properties, Driver and Update Driver, Install from specific location I see:
Apple iPod USB Driver Version 6.0.9999.40 (12/11/2008) and
Apple iPod USB Driver Version 6.0.9999.61 (11/05/2012) and
USB Mass Storage Device
Does anyone have any other suggestions as to what I can try?

The code 10 might be caused by old driver componentry "stuck" in the bowels of your OS. If that's what is going on, we might be able to get past this ... but I'm afraid it's a bit of a performance.
First, go into "My Computer". Go "Tools > Folder Options". Go to the view tab.
Make sure "Show hidden files and folders" is selected.
Make sure "Hide extensions for known filetypes" is unchecked.
Make sure "Hide protected operating system files (Recommended)" is unchecked.
Click OK.
Now in "My Computer", open "Local Disk C:" or whichever drive your Operating System is installed on.
Open the "Windows" folder.
Open the "system32" folder.
Open the "DRVSTORE" folder.
In there look to see if you have either of the following two folders:
netaapl_(LongStringOfNumbers)
usbaapl_(LongStringOfNumbers)
If you find either of them, drag them out onto the desktop. (Don't touch any other files or folders you see in there.)
Now go back into the "system32" directory.
Open the "Drivers" directory.
Look for either of the following two files:
netaapl.sys
usbaapl.sys
If you see either of them in there, drag them out onto the desktop. (Again, don't touch any other files or folders you see in there.)
Now restart the PC. Try a complete uninstall/reinstall of itunes and related components as per the following document:
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
... and then try connecting the nano again. Any better luck this time?

Ipod Nano 4th Gen not recognised in Windows Vista, Windows 7 or Itunes and screen blank

Hello,
I have a quite old (3-4 years old) iPod Nano 4th Gen.
The screen is blank, which means it needs charging. When I plug it into my laptop/computer then it doesn't show up which im assuming is because it needs charging.
When I plug it into my plug charger (plugged into a wall) nothing happens.
I think this is because the cables (I have 3- 2 computer USB cables and one plug charger cable) being too lose and not connecting to the iPhone fully.
I have looked at all the articles, I have done the R's, I have tried to restore it, I have pressed the clickwheel and centre button together and I have toggled the hold switch.
If anyone can help it would be appreciated! (And please save the "take it to apple support" etc... comments for if you can't think of anything else- not being rude but I know this)
Thanks
BitMyApple

Hey, I hear ya and can sympathize. I have the same
issue. The difference is that my computer can "see"
my ipod but it refuses to show up in itunes itself;
therefore, I can't put anything on the ipod (from the
computer) and vice-versa. Apple support is clueless.
This is very frustrating to say the least. Itunes
keeps telling me that my ipod is synced to a
"different" computer, which isn't true. It's the
same computer. The difference is that when I first
got the 'pod and used it with this computer (and
everything worked fine), I was running XP. I
installed Vista and after that, all the problems
started. If I ever get this resolved, believe me,
I'll post something here.
I'm guessing that somehow, itunes "sees" what
computer it's hooked to by "looking" at something in
the OS. Change the OS and it "thinks" it's seeing a
"different" computer.
Try reformatting it.

Itunes won't recognize my ipod nano 4th gen (or any other ipod) as a device

i've had my ipod nano 4th gen for as long as 4th gen's have been around. never had a problem with it or itunes. until now. all of a sudden, when i plug my ipod in to sync the new music purchased, itunes doesn't even recognize my ipod. "devices" never even comes up. "sync ipod" under file isn't highlighted. my ipod only shows as charging. since this problem occurred, i've tried my husband's ipod and it isn't recognized. i've used numerous cords in both USB ports. i've uninstalled and reinstalled itunes. nothing is working! any suggestions would be greatly appreciated!!!!

Here'sa link that might help
p://support.apple.com/kb/TS1363

Dropped Ipod nano 4th gen

ok last night I dropped my Ipod nano 4th gen without a case on my tile floor. It was about a 3-4 feet drop.
So today I was running and than after a couple mins of running with the song still playing my ipod buttons froze, nothing worked the screen remained black but the music still played. than after a few seconds trying to make the screen show back up my whole volume limit raised up maxed with a weird twisted sound to it. also, every now and than my songs would pause than play again without me doing anything to it.
I also was running in cold weather, is that the case?
Could of me dropping my ipod caused this to happen?
or can dropping my ipod cause any problems at all?
thanks

You posted this in the MacBook forum.
Try posting it in the iPod forum. You will get much better feedback.
Joseph Kriz

Does Ipod Nano 4th Gen charge in the iHome iP9?

Similar Messages

Maybe you are looking for