Does iPod nano work with Stereo Connection Kit?

Does anyone know if the iPod nano will work with the Stereo Connection Kit w/ monster cables? Someone bought both for me but the connection kit doesn't say it works with the nano anywhere on the box or in the instructions. Thanks for your help

The dock should work if you line it up right but everything else will work just fine. Realise you need USB to sync with a computer but Firewire is fine for charging.

Similar Messages

  • Does ipod nano work with ipod photo dock, s-video out?

    Does the ipod nano work with the ipod photo dock, with an s-video out? Will apple make one for the nano specifically?

    The iPod nano cannot show photos on an external device, I suspect Apple have not built this feature into the hardware. The options for showing to a TV are not in the photo menus either.
    Ian

  • Does iPod Nano work with Camera Connector?

    Is the iPod Nano able to work with the Camera Connector? How about the Belkin Camera Connector or Belkin Media Reader?

    6GB nano we might see in a year, a 20 GB nano is presently only a fantasy and while eventually possible, we won't be seeing it anytime soon. To my understanding the belkin media reader uses firewire to communicate among other things so no it wont work with the Nano. And of course the Nano is windows preformatted windows compatible.

  • Does the Ipod nano work with microsoft XP?

    Does the ipod nano work with MS windows XP? itunes will recognize my Nano 7G, therefor I cannot sync,

    Have you try putting your ipod into disk mode if you need help putting it in disk mode here's a page from apple
    of how to put your ipod nano into disk mode: http://support.apple.com/kb/ht1363

  • HT1386 I just reinstalled my windows operating system and decided to put on windows 8.  After loading all of my music back into a freshly installed itunes, my 4th gen ipod is not recognized by itunes.  My 1st gen ipod nano works with no problem.  Help!

    reinstalled my windows operating system and decided to put on windows 8.  After loading all of my music back into a freshly installed itunes, my 4th gen ipod is not recognized by itunes.  My 1st gen ipod nano works with no problem.  I can eliminate any problems with the cable and connection.
    I've stopped and started the service, and also have performed cold reboots.
    Nothing seems to have helped the situation.
    Help!

    See:
    iOS: Device not recognized in iTunes for Windows
    I would start with
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    iTunes for Windows: Device Sync Tests
    Have you tried on another computer to help determine if you have a computer or iPod problem?
    The iPod Classic uses different drivers than the Nano

  • IPod nano works with USB 1.1 but not USB 2.0

    Anyone using an iPod nano that works with USB 1.1 but not with USB 2.0? I am using Windows XP and when installing the iPod software from CD it recognizes the iPod and am able to transfer songs using iTunes but when installing SP1 or SP2 to enable USB 2.0 transfers, Windows XP only recognizes the iPod nano as a USB Mass Storage Device. This is the same with iPod Updater.

    I have a similar problem with the following configuration:
    - Dell Dimension 4100 Desktop with 2 integrated USB 1.1 ports, Windows 2000 SP 4
    - PCI 6-Ports USB 2.0 Card ("Mentor" resp. www.bona.com.tw), Model USB20-PCI/6P
    What works well?
    - All my USB add-ons (1.1 and 2.0) on the internal 1.1 ports as well as on the USB2.0 PCI card
    - iPod Nano 4GB on internal 1.1 ports (external drive in windows 2000 as well as iPod in iTunes)
    - iPod Nano works as well as on the USB 2.0 card ONLY WHEN my old 4-port USB1.1 hub is connected between Nano and USB card
    What doesn't works?
    My iPod Nano directly connected to the USB 2.0 card. Symptoms when connecting:
    - Windows is very slow, process "scvhost.exe" or "system.exe" using 99% of CPU for some minutes
    - iPod is recognised as external drive, but when I click on it, it is empty and copying files to it results in "I/O error"
    - iTunes doesn't recognise the iPod (of course, if even windows itself cannot read from it...)
    I removed all USB drivers, reinstalled iTunes, iPod (by the way, I still don't understand what "iPod update" is good for, except for updating the iPod's firmware), deactivate the internal USB1.1 ports, no result.
    Help!!!!!!!!!!!!!!!!

  • Will ipod nano work with itunes and windows 8?

    I am having trouble putting audiobooks from itunes on my ipod nano.  I have the 7th generation ipod and windows 8.  I have managed to put music and a couple movies on it but no luck with the audio books.  Please help!  Thank you, Lori

    Yes.  All model iPods should work with the newest version of iTunes.
    B-rock

  • Will ipod Nano Work With SP2?

    Hi everone! I want to buy a nano but all these negative discussions are giving me doubts. I have Windows XP SP2, all patches, and a USB 2.0 port. Will my iPod Nano work properly on this machinge if I buy one?

    Can you tell me more?
    No, not really. I'm a Mac user and I avoid Windows like the plague.
    I would imagine that any installation problems that you read about on these forums probably do not represent the majority of Windows iPod users. People post here when they have problems... so you never hear about the millions of users who are running smoothly without any issues.
    Chances are, you'll have no issues at all.

  • Help!  iPod classic works with stereo, in car, but won't connect with PC

    I've been to the Genius bar, my iPod classic works fine on their Mac and their Mac/PC. It works fine in my stereo and in my car. However, when I try to hook up with my Dell, it no longer recognizes it. I've uninstalled and re-installed the latest version of iTunes. (Also unintalled Quicktime, Apple Software Updater and the Apple Mobile software. When I try to connect (even bought a new cord, in case that was the issue), it thinks about it for a long time and never connects. Do I need to have a minumum amount of space on my hard drive in order for this to work (it's pretty full right now). Or is there something I'm doing wrong?

    Since the latest firmware update to my iPod Classic (which is actually the latest video iPod in the larger form factor - not the new video nanos) - both Windows XP and Windows Vista both are reporting that my iPod only supports USB 1.1 interface. So if my BIOS or Windows settings had been set to NOT support USB 1.0/1.1 devices, they probably would not have even shown up in Windows. The strange thing is - this very same iPOD worked no problem in both Vista and XP on the very same machine - until the latest firmware update to the iPOD itself. I am still using the very same cable that used to work - it all showed up as USB 2.0 - now, only USB 1.1. I mention this because if you updated your iPOD firmware recently, perhaps you are experiencing the same thing. Check your BIOS and Windows USB drivers to ensure they support USB 1.1 because maybe that is what your iPOD is now trying to connect as - even though the hardware itself is USB 2.0. Just a thought - now if I could only figure out what happened to my new iPod that used to work so well.

  • Does the new Ipod Nano work with AUDI Music Interface

    Getting a new Audi A4 with music interface and wanted to know if this will work with Ipod Nano or do I need Ipod Classic or Touch?

    hi
    Yes it does. just bought a Bose. But make sure you have no cover on your Nano as it will not connect!

  • Does the Ipod Nano work with Windows XP SP1???

    I studied the system requirements for the ipod nano and there was written, that I need a WinXP with SP2 for it.
    Because I use Sound-Software that only works with Windows XP SP1 I have to keep this system, and I now would like to know if that works. Could anyone answer this question??

    Have you try putting your ipod into disk mode if you need help putting it in disk mode here's a page from apple
    of how to put your ipod nano into disk mode: http://support.apple.com/kb/ht1363

  • Does a 7th generation ipod nano work with windows 8?

    we bought a new HP laptop with Windows 8 and are having difficulties wtih our 7th generation Ipod nano's not being recognized by the computer. Is Windows 8 compatible with the Ipod nano 7th generation?

    Hello LCREW,
    The article linked below provides some useful troubleshooting steps that can help get your iPod to appear in iTunes.
    iPod: Appears in Windows but not in iTunes
    http://support.apple.com/kb/TS1363
    Cheers,
    Allen

  • Does the latest ipod nano work with icloud?

    Hey guys!
    I've recieved a new ipod nano (seventh generation), brand spankin new. Got it all set up with itunes and have music added and everything.
    I also have a ipod touch (third generation) with tons of music NOT in my itunes library. But I do have that music stored on the icloud.
    I'm becoming frustrated. How can I go about adding music from my ipod touch, to my new ipod nano?
    Home sharing is on. I manually manage my own music..
    I'm just unclear how to get something as simple as playlists and songs from one to the other.
    Someone please help!

    The iPod nano can't interface directly with either Apple's servers or the iPod touch. You need to put the content in a computer's iTunes library and then sync the iPod nano with that library.
    (102723)

  • Why doesn't my fifth generation ipod nano work with my Toyota Yaris?

    Hello – The charging feature on my new fifth generation ipod nano doesn’t work with the factory glove compartment adapter that came with my 2008 Toyota Yaris. It plays music, etc but does not charge the ipod when connected.
    My third generation nano charged perfectly with my yaris until it was run over and crushed recently. My nano gen 5 replacement doesn’t work the same with my Yaris. Can anyone help?
    Steve
    [email protected]

    I cannot say for sure, I don't know anything about the toyota yaris. However, if that system was built to work with older firewire based iPods, then it will not charge new USB based units. There are converters out there you can get do deal with this.
    http://www.scosche.com/products/productID/1667
    i

  • Why won't my new iPod nano work with griffin itrip?

    I just receiveed a new ipod nano as part of the replacement programme, but it will not work with my griffin itrip or my old speakers even though the connection is the same - anyone know why?
    thanks

    I used an iTrip with my old Classic 160, but when I got my 6th gen nano, it wouldn't work either. My iTrip was old, and the connector had lost it's plastic bits, so I thought that might be the reason. I could still use my Logitech speaker dock, so I don't think they changed the connector.

Maybe you are looking for

  • How do i find the location of Oracle password file in the HDD

    we giv the location of the password file while we use the orapwd command to create one. later if we forget the location of the password file (incase it is not at the default location) then is there a way to find it or do we just create a new password

  • Dowload help

    i can't get past the adobe assistant to download the free photoshop elements 11 trial. i've tried to create an account, it says i already have one, i've reset my password but the blue pop up won't accept the password. i've been able to log in to adob

  • Using Weblogic JMS for internal delivery channel

    hi, I want my B2B to talk to back-end application through Weblogic JMS queues. I have configured internal delivery channel for this. I am getting error message 'Max retry exceeded' in b2b_idc_transport.log 2008.09.24 at 12:09:53:713: B2BStarter threa

  • When changing SAP source table causes drop trigger

    Hi folks, Recently we had an issue where a table stopped replicating with ERROR status in our development HANA environment due to a dropped trigger.  We were able to trace the drop trigger command to an abap user who had made a change to the source t

  • Setting id's for the datatables.

    I have a datatable "A" in which another datatable "B" is nested. I need to hide/unhide "B" from the onclick event of an item on the datatable "A". But i can't seem to set the id of the datatable "B". How can i achieve this?