Does it mandatory to use Delta/WYE 3phase PDU for CRS1 8 slot deployment? Can we just use default single phase AC power-shelves?

does it mandatory to use Delta/WYE 3phase PDU for CRS1 8 slot deployment? Can we just use default single phase AC power-shelves?

The fixed power supplies (legacy / zone based system) require 3-phase AC-Delta/WYE.
The modular power supplies do not use a zone based system and require a single phase. You can order a CRS PDU to convert 3-phase AC input (from power source) to single-phase AC input for the power shelf.
HTH,
Sam

Similar Messages

Does the iPhone 4s need a data plan inorder for "siri" to work or can you just use your local wifi?

Does the iPhone 4s need a data plan inorder for "siri" to work or can you just use your local wifi?

It can use both in all the commercials they are using wifi im trying to find out just how much Siri depends on data but so far I think it mainly uses it to pull info up and for some reason to dictate email but it does work on carrier data I guess it's just slower so you don't neccersarily need a data plan in place or have to dig into it to use Siri If you have wifi close by

I had purchased and downloaded a tv series to my ipad. Then deleted it due to space constraints. Now I wanted to download it permanently to my MacBook but itunes does not show this purchases. It worked, however, for another series. What can I do?

I had purchased and downloaded a tv series to my ipad. Then deleted it due to space constraints. Now I wanted to download it permanently to my MacBook but itunes does not show this purchases. It worked, however, for another series. What can I do?
Thanks for any help!

You may need to put the iPad into recovery mode : http://support.apple.com/kb/ht1808 - you should then be able to reset the iPad.
If you haven't synced to a computer them (from here) :
If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present.

I now have internet thru AT&T Uverse with their wireless router.....do I still need to use my Airport Express for my 2 MACS or can I just unplug it?

I now have internet thru AT&T Uverse with their wireless router.....do I still need to use my Airport Express for my 2 MACS or can I just unplug it?

You can just unplug the express and use the Uverse wireless or ethernet directly to it.

Pages software in 10.8.3 does not support work done on microsoft office 2004. Pop us says "You can't open the application "Mircosoft Excel" because Power PC applications are no longer supported. What can I do now?

Pages software in 10.8.3 does not support previous work done on microsoft office 2004. Pop up says -- You can't open the application "Mircosoft Excel" because Power PC applications are no longer supported. What can I do now?

Use Numbers, OpenOffice, LibreOffice, Microsoft Office 2008 or newer, Google Docs, or similar tools to open the files.
(85829)

Does the imac need airport to connect to the internet??? Or can it just connect via any router?? thanks

Does the imac need airport to connect to the interent of can I just connect it via any router?????

you should be able to use any router.

TS1702 Does anybody know how to cancel a paused update for an app, so I can continue to use the original version?

I accidentally hit an app to try to update and I immediately. Paused it but now I can't get into my app to use it! Its staying paused or tries to update! It's a dictionary app that I don't have enough room to update now! ( I do but it would take all I have left) so I would like to cancel it but it's not letting me! Help please! Thanks!:)

What you want to do can't be done. There is no low-friction way to combine image adjustments from Aperture and Lightroom. There is no way at all to combine them without creating new files.
This was recently discussed in this thread.
Are you using the Edge Sharpening adjustment? In Aperture 3, it superceded the old Sharpening adjustment, which remains included for backwards compatibility.

Risk & Security vulnerability for using default ports

Dear All,
As far as I know, Oracle does not recommend to use default ports for
security purposes. Searching out of Oracle community found that some people
think that it does not matter any more. However, it can have some vulnerability
and, I think, security risk & auditors would not like to see that.
I have found that in 2012 ORacle Tns listener port 1521 had a vulnerability
issue with oracle database 11gR1 and 11gR2, but how about Oracle 12?.
Also, I was searching something similiar for Oracle OAM, SOA, OIM, OAAM, but still cannot
find anything.
Thanks
Georgina Acuna-Rivera

Do you happen to have such a storage peripheral attached to your M3000?
If yes, then it is probably reachable through the M3000's IP address. You will need to log a support ticket with HP and get guidance how to get into the array's FCAL controller and investigate the issue.
If you do not have an HP array attached to your M3000, then log a support case with Oracle and arrange for a field service engineer to visit the site to manipulate the password for its `admin` account (since that special account is likely needs service-employee-only access).
Either way, you need to get accurate technical support and this forum is NOT official tech-support.

Read velocity from QUAD-510 using single phase sensor

Hello, for my application I'm using a proximity sensor to count pulses using the CTR-400. To obtain velocity, I can make some calculations based on frequency or period but I was wondering if I can delegate this annoying task to the QUAD-510 module At the moment I'm able to read velocity using an encoder, but what if I use a single phase sensor like a proximity?

Hi,
Take a look at this document that talks about measurement with single phase and QUAD-510:
http://digital.ni.com/public.nsf/allkb/5E1CBFCBF821822686256CBB005B5305?OpenDocument
Best regards
Luca Gallo
Sales Engineer
Attachments:
PID Velocity Control.vi ‏34 KB

Is it mandatory to use MDS?

We are creating a portal which will contain static content and no run time customization of pages. Also, WebCenter Spaces or SOA is not used. The database would be required for the applications, however. I want to ask if it is mandatory to use MDS in this case. Can we have a simple EAR file deployed with Datasources configured in weblogic and no MAR file or MDS installation?

It would be a Webcenter portal application where we have individual ADF applications bundled as portlets. However features like runtime creation/ customization of pages, Message board, Spaces, etc are not used.
I wanted to know can we still have a portal application which does not require a file based or DB based MDS environment.
Edited by: newdev on Jul 14, 2011 7:46 PM

My Ipad mini does not see my printer. my wife's ipad2 does. We both use IOS8 and upgraded at the same time. How can I remedy this?

My Ipad mini does not see my printer. my wife's ipad2 does. We both use IOS8 and upgraded at the same time. How can I remedy this?

OK great info!
I found 2 possible ethernet to USB adapters:
By "Plugable": USB 2.0 to ethernet LAN wired network adapter - seems this will work, but I'll contact Plugable.
2. Apple USB Ethernet Adapter
Easily connect your MacBook Air computer to an Ethernet network with the Apple USB Ethernet Adapter. Small and light, it connects to the USB 2.0 port of your MacBook Air and provides an RJ-45 connector that supports 10/100BASE-T performance. BUT NOT SURE IF THIS WILL WORK ON ANYTHING BUT a MacBook Air…
One person commented:
This little gem used to be the device of choice for adding a second Ethernet interface to a Mac Mini Server and I'd been using one that way for about a year. After doing a software update to 10.6.6 it stopped working. Forewarned is forearmed – it appears that Apple is finally enforcing the MacBook Air system requirement.
Thanks for any additional comments.
Best regards,
Steve Schulte
Sunday 6 January 2013

How does one continue to use Mail on the early MacBook Pro, Model 1,1, that is not upgradable to Lion? I have been running iCloud on my iPhone (OS5) and iMac (Lion) along with the MacBook Pro (OS Version 10.6.8)

How does one continue to use Mail on the early MacBook Pro, Model 1,1, that is not upgradable to Lion? I have been running iCloud on my iPhone (OS5) and iMac (Lion) along with the MacBook Pro (OS Version 10.6.8) since November until now. Mail will no longer download on the MacBook Pro and keeps asking for my password.

Mail should still be usable with your machine - but you'll need to update the settings to conform to the requirements of your system. Check with your ISP (like ATT, etc.) for the settings that will work with your Mail. Once you've updated this, you should be able to email like before.
For example, my ISP required that I go to Mail Preferences/Accounts and make sure the details conform to your email settings.
I have no idea of what your ISP is or what the settings might be, but this is likely the source of the problem.

Is there a way to increase the icon size (and the text below) without using zoom? I am trying to help out someone who has moderate visual impairment that does not want to use zoom just to see the icons and their labels.

Is there a way to increase the icon size (and the text below) without using zoom in iOS 7? I am trying to help out someone who has moderate visual impairment that does not want to use zoom just to see the icons and their labels.

Hello Apple.
It seems you have gone to great lengths to improve accessibility in many areas of the iPad. Why was this obvious problem with icon text size missed? (It's not with the Mac.). And for so long too.
Do you employ people with actual accessibility problems to help you do UI design?
I think too, that some buttons are too close for people who might have motor control problems.
I love my iPad but I fear as I age, the iPad might not keep up with me.

Farm Remote App 2012 R : Your system administrator does not allow the use of default credentials to log on to Work Resources

Hi
Here is the situation:
I have a Farm with 3 servers W2012R2 in a Domain
Server1                           Server 2
Server3
RDSession Host            RDSession Host
RDSession Host
Connection Broker        Connection Broker (Passive)
RD Web Access
2 DNS Alias : - poc.mydomain.local (Use for the RD Web Access and points to Server1
                  -poccb.mydomain.local (Use for the Connection Broker and points to Server1)
I have setup the Connection broker in HA with Server2 as Passive Server : DNS Round Robin poccb.mydomain.local (Server1)
The certificate Manager has generated 2 CA certificates :
- 1 for the RD Web Acc (poc.mydomain.local
-1 for Connection Broker SSO and for publishing
I have created 1 Group Policy for these 3 servers and 1 GP for my client Windows 7 SP1.
Server GPO :
Computer/Administrative Templates/Windows Components/Remote Desktop Services/Remote Desktop Session Host/Security
Always prompt for password upon connection=Disabled
Require use of specific security layer for remote (RDP) connections : SSL (TLS 1.0)
Set client connection encryption level : High Level
Client GPO
Computer/Administrative Templates/System/Credentials Delegation = Allow delegating default credentials (Concatenate OS defaults with input above)
TERMSRV/POCCB.mydomain.local
I use no Gateway and in my collection,I have activated SSL (Like in my Server GPO)
I have now problem with SSO.
Connection with remote desktop client with server name = poccb.mydomain.local
Your system administrator does not allow you the use of default credentials to log on to the remote computer poccb.mydomain.local because its identity is not fully verified
If in my client GPO I add the physical name of the 3 servers, it works :
TERMSRV/Server1
TERMSRV/Server2
TERMSRV/Server3
Open RDP Files with server name = poccb.mydomain.local
if my connection broker connects me on Server1 , no problem
But If I arrive on Server2 & Server 3=
Your system administrator does not allow the use of default credentials to log on to Work Resources
I have searched on internet. No result for " to log on to Work Resources"
Any idea ? Thanks for your help

Hi,
Thank you for posting in Windows Server Forum.
Firstly check that, your user is using domain\username to enter the credential in the dialog box.
Now for a try, you can edit .rdp file with notepad and just place “enablecredsspsupport:i:0” line in it, save it an launch to check whether you are facing same issue.
As you are using windows 7 then upgrade to RDP 8.1. Also as you have already enter the FQDN name of server under “Allow delegating default credentials”. For a try please enable and configure for all the remaining settings as follow and check the result.
Start / Run / gpedit.msc / Computer Configuration / Administrative Templates / System / Credentials Delegation, and make sure you have the following four options enabled and configured:
Allow Delegating Default Credentials with NTLM-only Server Authentication
Allow Delegating Default Credentials
Allow Delegating Saved Credentials
Allow Delegating Saved Credentials with NTLM-only Server Authentication
Finally, open a command prompt and use “gpupdate /force” command to apply the policy directly.
More information:
Remote desktop credentials did not work
Hope it helps!
Thanks.
Dharmesh Solanki

I cannot upload any pictures to Flickr for the past three days, I just get the upload screen which when I click on upload does nothing I'm using PSE12

I cannot upload any pictures to Flickr for the past three days, I just get the upload screen which when I click on upload does nothing I'm using PSE12, I have had no problems in the past , I still have had no response to this post and it has been several weeks since initially posted, is there anyone awake at Adobe, can someone give me advice or is there total lack of interest once the product has been purchased I have been a customer of PSE for many year since PSE6 now on 12 but lack of response may cause me to rethink

Turn off your iPad and put it in recovery mode. Try to restore it via iTunes.
http://support.apple.com/kb/HT1808

Does it mandatory to use Delta/WYE 3phase PDU for CRS1 8 slot deployment? Can we just use default single phase AC power-shelves?

Similar Messages

Maybe you are looking for