Does it necessary to put the "plus archivelog" in incremental backup?

Hi
Because RMAN is using the archivelog to create the incremental backup , does it necessary to put the "plus archivelog" in backup command?

VahidS wrote:
Hi
Because RMAN is using the archivelog to create the incremental backup , does it necessary to put the "plus archivelog" in backup command?
Please cite the documentation that says rman is using the archivelog to create the incremental backup.
Lacking documentation, please post a proof example.In your personal sandbox database, do the following:
1 - delete any existing archivelogs
2 - take a level 0 incremental backup
3 - generate a few archivelogs
4 - delete the generated archivelogs manually, using and os command
5 - take a level 1 incremental backup

Similar Messages

HT5570 I can't access icloud, the email address is no longer in use and it does not let me put the new apple ID on the iPad

Can any one help me on this??

If you mean that Find My Phone is asking for a password to a different Apple ID to your current Apple ID.
This feature has been introduced to make stolen phones useless to those that have stolen them.
However it can also arise when the user has changed their Apple ID details with Apple and not made the same changes to their iCloud account/Find My Phone on their device before upgrading to iOS 7, or if you restore from a previous back up made before you changed your details.
The only solution is to change your Apple ID back to its previous state with Apple at My Apple ID using your current password, you don’t need access to this address if it’s previously been used with your Apple ID, once you have saved these details enter the password as requested on your device and then turn off "find my phone" and delete the account from your device.
You should then change your Apple ID back to its current state, save it once again and then log back in using your current Apple ID. Finally, turn "find my phone" back on once again.
This article provides more information about Activation Lock.

What difference do adding 'Plus Archivelogs' make to an open database backup

Hi,
Does adding the 'plus archivelogs' command to RMAN>backup database;
make any difference to the backup when the database is open ?
If the database is open, then RMAN>backup database; is having to include the archivelogs anyway to ensure the backupset pieces will have a consistent SCN and are not fuzzy.
So it seems to my mind that RMAN>backup database;
effectively implicitly adds 'plus archivelogs' anyway
Any clarity greatly appreciated,
Jimbo

Hi Jim,
As far as I understand , its not a compulsion to take archive log backups ( though highly recommended).
You may run into a situation where you just need the DB backup and while recovery you could use the archives already present without taking the rman backup.
For example in case of creating a DR standby database , you can use the rman backup from prod , ship it to the BCP location and thn simply restore using a standby controlfile. Post that start RFS process and it will bring the archives on its own.
regards
KK

I am trying to restore my catalog having previously done a back up to an external hard drive and subsequently an incremental backup. I am using Photoshop Elements 11 and the only option given in the restore procedure is to open a .tly file.

I have done this but now the restore function is asking for yet another file, which i assume to be the original back up, but that is the only .tly file since the only other relevant file appears to be called catalog.buc but that is just not visible when using the restore function? How do I continue from here with this restoration of my catalog?

Martin_Had a écrit:
Thank you Andaleeb. I appear to have an old backup of a year ago, and a more recent full back up plus an incremental backup.
Regrettably I don't really understand what is going on because firstly the restore does not complete its cycle so I cannot see what that backup file contains and secondly all I have read would suggest that the .tly file is the full backup and the catalog.buc file is the incremental backup. For the present, the catalog shows the photos for 2014 which makes me think I might have backed from the old back up file.
I am minded to create another catalog and try again.
Any views on what I can do?
A backup (full or incremental) is a folder, not a file. It contains renamed pictures file copies as well a copies of the files and subfolders of the original catalog. The catalog.buc is a renamed copy of the database of your original catalog while the backup.tly. That backup.tly file contains the information to restore the renamed pictures where you decide, the original location or a new custom one. You can't do anything with the backup yourself, only the restore process can do the job if it finds the backup.tly file. In the case of an incremental backup, you have to tell the restore process where to find the incremental backup folder; it finds the backup.tly file in that folder and finds what is to restore there; then it asks you for the previous backup folder (in your case the full backup); you then browse to that full backup folder so that the restore process can find find the backup.tly there; the restore then deals with the rest of the files to restore.

I am trying to put the files from my mac onto a seagate backup plus slim portable drive but as soon as I plug the hard drive into my laptop, a notification comes up saying that there was an error

I am trying to put the files from my mac onto a seagate backup plus slim portable drive but as soon as I plug the hard drive into my laptop, a notification comes up saying that there was an error

carriinna wrote:
I am trying to put the files from my mac onto a seagate backup plus slim portable drive but as soon as I plug the hard drive into my laptop, a notification comes up saying that there was an error
What kind of error. What does it say?
Ciao.

Ipone 4s display suddenly doesn't work any more. i can't even unlock it as it put the numbers itself. and if i am lucky to unlock it opens apps and does everything whenever my finger comes near without even touching it. can anyone help?

ipone 4s display suddenly doesn't work any more. most of the time i can't even unlock my iphone as it puts the numbers itself. and if i am lucky to unlock it opens apps and does everything else whenever my finger comes near the display without even touching it. I did reset and also updated my operating system. But the problem stills shows up... can anyone help please?

Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact

When I import a commercial CD itunes will create 2 identical albums and put all of the songs except one into one album and put the other song into the other album by it self. How can I combine them all into one album and why is itunes doing this?

When I import a commerical CD Itunes will create 2 identical albums and put all of the songs except one into one album and put the other song into the second album that it created. Why is itunes doing this and what can I do to combine them into one album?

I found this to be somewhat helpful: Grouping Tracks into Albums
What I did was to put in the same name for Album Artist in every track. That seemed to do the trick (previously all those fields were empty). It seems like a lot of work for a simple thing.
iTunes knows (or should know) that these tracks were imported from one CD. So why is it relying on incomplete data from the gracenote database?

HT1414 is it necessary to put in sim card in iphone at the time of restore ? My phone is stolen and i am concerned that if somebody will restore it then i will not be able to find it even using find my phone.

is it necessary to put in sim card in iphone at the time of restore ? My phone is stolen and i am concerned that if somebody will restore it then i will not be able to find it even using find my phone.

There is no way that you can locate the iphone at all.
The thief can restore it and use it as their own. You will never know or be able to tell what they do with it.
Very sorry. Your iphone is gone.
Report it to the police and change your passwords.

I want to upgrade my 2007 Mac desktop to 10.5 Leopard. I am currently running on 10.4.11. I have put the leopard disk into the drive and all it does is make a weird noise and then spits the disk right back out. It doesn't do this with other disks. HELP

I want to upgrade my 2007 Mac desktop to 10.5 Leopard. I am currently running on 10.4.11. When I put the leopard disk into the drive all it does is make a weird noise and then spits the disk right back out. It doesn't do this with any other discs, only this software. Is it still possible to update this computer?

Yes. Try Amazon.
Before you do upgrade to Snow Leopard, make sure your Mac meets the requirements.
Mac OS X v10.6 Snow Leopard - Technical Specifications
Make sure the disc you tried using doesn't have any fingerprints or smudges on it. The optical drive can't read the disk otherwise.
If your Mac won't read the disc, might be a good idea to rule out any problems with the startup disk BEFORE trying to upgrade the system.
Using Disk Utility to verify or repair disks
Message was edited by: Carolyn

HT1277 I have quickbooks software. I am traveling. I tried to send an invoice out, using the mac email (version 5.3) I can't send the mail out. I get a pop up asking for my password, I put the password in and it does not accept it.

I have quickbooks software. I am traveling. I tried to send an invoice out, using the mac email (version 5.3) I can't send the mail out. I get a pop up asking for my password, I put the password in and it does not accept it. This is the 1st time I've had this problem.
slpmtns

Whilst it may not be your fault I am afraid it appears that your post is on a forum which is not the best for your OS. It will save the time of the unpaid volunteers here, and may resolve your issue faster, if you could examine the list below and see if there is a more appropriate forum to which you could direct your question.
OS X 10.9 Mavericks
OS X 10.8 Mountain Lion
OS X 10.7 Lion
OS X 10.6 Snow Leopard
OS X 10.5 Leopard
OS X 10.4 Tiger
OS X 10.3 and earlier
OS 9, OS 8 & System 7
OS X Technologies
OS X Server
iPad
iPhone
iPod
Other

I purchased Adobe CS4. I am now being asked for my serial number and when I put it in the program does not recognize it for Acrobat Pro 9 though it does for PhotoShop, Bridge and the rest of the suite. What can I do?

I purchased Adobe CS4. I am now being asked for my serial number and when I put it in the program does not recognize it for Acrobat Pro 9 though it does for PhotoShop, Bridge and the rest of the suite. What can I do?

Contact support if you have serial number issues. Otherwise start by checking this stuff:
Sign in, activation, or connection errors
Mylenium

"Allow power button to put the computer to sleep" setting is not available but button does it anyway

This has never happened before. Computer stayed at gray screen with no progress wheel so I held the power button to shut it down. Since startup afterwards the power button sleeps the computer. There's no "allow power button to put the computer to sleep" choice available in Energy Saver but button does it anyway. Is there a defaults command that will fix it? Something else?

I've had Mavericks for a week and a half. I don't believe yesterday could have been the first time I used the power button in an attempt to get the Restart Sleep Cancel Shut Down box, but I've been around long enough to know that memory will fool you.
Yours 'til it doesn't,
llee

Does anybody know when apple are going to put the new i5 and i7 precessors into the macbook air, does anybody know when apple are going to put the new i5 and i7 precessors into the macbook air

hi, does anybody know when apple will put the new i5 or i7 processors in the macbook air's

No one knows for sure nor can we discuss future Apple products here. It's against the TOS.
17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101

Ipad displays "ipad is disabled connect to itunes", I have tried putting the ipad into recovery mode and then restoring but that does not work. I have also tried doing a hard reset of the ipad and that does not work either. Any ideas?

Ipad displays “ipad is disabled connect to itunes”, I have tried putting the ipad into recovery mode and then restoring but that does not work. I have also tried doing a hard reset of the ipad and that does not work either. Any ideas?
My son let one of his friends use his ipad. The next time he tired to use it he could not get it unlocked, I tired to unlock it but it kept telling me that I had the wrong pass code. With out me knowing my son continued to tire until it completely disabled it self.

How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
You may have to do this several times.
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
 Cheers, Tom

Why does Firefox sometimes put the New Tab "+" button to the left of my open tabs instead of to the right?

''dupe of https://support.mozilla.org/en-US/questions/932160''
[Re-posted with additional details when I thought this post had failed. Please respond to the other post and ignore this one. My apologies for the duplication.]
In some windows, seems more likely after a crash recovery (but not sure there's a connection), Firefox puts the New Tab "+" button to the left of my tabs instead of the right. This is annoying, because once you're used to clicking it to the right of your open tabs, it's confusing to sometimes find it to the left.
If I go into Customize mode, it still shows the "+" tab on the right, but as soon as I close Customize, it's really still there on the left edge of the screen.
Why does this happen and can I stop it? I have seen no reports of this problem posted by others, but it's been happening for me since at least Version 12 and not fixed by version 13.0.1.

This may be related to session restore.
*[https://bugzilla.mozilla.org/show_bug.cgi?id=774943 bug 774943] - Session restore puts "+" button in the wrong spot and hides first tab
*[https://bugzilla.mozilla.org/show_bug.cgi?id=714382 bug 714382] - Leftmost tab is hidden when reopening browser window
<i>([https://bugzilla.mozilla.org/page.cgi?id=etiquette.html please do not comment in bug reports])</i>

Does it necessary to put the "plus archivelog" in incremental backup?

Similar Messages

Maybe you are looking for