Does it need add the native vlan to allowed vlan list ?

If I confiured the port like this "
switchport trunk native vlan 10
switchport trunk allowed vlan 11,12"
does the vlan 10 allowed passing ? or it still need add vlan 10 to the allowed vlan list like "
switchport trunk native vlan 10
switchport trunk allowed vlan 10,11,12"
Thanks

Yes you can remove the native VLAN from the list, and it does prevent the native VLAN from traversing the trunk. That is, if you look at the Spanning Tree for the native VLAN, the trunk will be absent from the list of ports on the VLAN.
The question of untagged frames is a different one. There are some control protocols, particularly link-local ones, that are sent untagged, and these will traverse the trunk regardless. However, they are not considered as part of the native VLAN Spanning Tree as such.
But beware: there is a bug in earlier IOS and in all CatOS switches! If you use a non-1 VLAN as your trunk native VLAN, and you disallow it from the trunks, and there are no other ports carrying that native VLAN, then the Spanning Tree for that VLAN shut down. That is fair enough. But the bug is that the Spanning Tree for VLAN 1 also breaks down, sending your network into meltdown.
Kevin Dorrell
Luxembourg

Similar Messages

List does not exist . The page you selected contains a list that does not exists. It may have been deleted by another user

Hi everybody!
I have a sharepoint 2013 farm with 5 sever. I upgraded a site from sharepoint
2007 to sharepoint 2013. I had some problems to install and configure workflow manager and register it. but by now I found problems and I can create a workflow and run it successfully. My big problem is when I try to get a lookup field in my flow. the
flow suspended and I got the following error:
“List does not exist . The page you selected contains a list that does not exists. It may have been deleted by another user.”
Any solution???
Thanks in advance!

Hi,
Please make sure the source list of the lookup column and the list which consumes the content from the lookup column exists on the site collection.
In addition, to correct this problem the following steps should be applied:
Delete the affected Workflow association
Go to "Central Administration" - "Application Management"
Select the affected web application and choose "General Settings" - "Resource Throttling"
Increase the value configured as "List View Lookup Threshold"
Perform an iisreset to ensure that all in memory instances of the web application settings are gone
Add the Workflow association back to the list
More information is here:
http://social.technet.microsoft.com/Forums/en-US/3aeeba20-07dd-4e46-941b-a3db1bb3577e/sharepoint-2013-designer-workflow-the-page-you-selected-contains-a-list-that-does-not-exist?forum=sharepointcustomization
Best Regards
Dennis Guo
TechNet Community Support

My wake-up/sleep button does not work, but the serial is out from Apple list to repair. What i do now?

The wake-up/ sleep iPhone 5 botton does not work, but the serial number is out of list to recall from Apple. The problem is so similar the described in the article in the site. I want to repair in the program, like other iPhones, how it is possible?
Thanks.

Then there isn't anything you can do about it then. Your only choice is to pay to have the device fixed or replaced. Apple is in charge of that, and as I said in the other thread, this is not Apple you are talking to, we are users like you and cannot do anything about that.

How do I add the Acrobat Distiller Printer to my list of printers.

I have Adobe Acrobat 5.0 full version. I would like to know how to convert MS Works files to PDF files.
I keep getting the following message when I try to open a file as a PDF file.
When I open the MIcrsoft Works program and try to print ot the Acrobat Distiller it's not listed as you can see in the image below.
How can I had the Acrobat Distiller to my list of printers.
Please email with an answer Thanks.
[email protected]

Well those listed files you had were of no help. I did some more searching in an system I had and found the downloaded file Acro5.0.5.exe.
I searched for instances of the word Adobe and deleted them including folders. Also cleaned the registry as well then reinstalled the software from the afore mentioned file. Then re-registered the program. Now everthing is working fine, The Acrobat Distiller Printer is now shown in Printers and Faxes Control Panel.
I did some file conversions to PDF and the distiller is now listed as a printer source in the Print Menu of the file I am converting.
Thank for your help.

897VAW: Cannot add Allowed vlans to Trunk on WLAN-GigabitEthernet interface

Hi,
I am trying to configure the Access Point module on my Cisco Router (897AVW), however I am unable to route / ping between the router and the AP.
In a few examples I've seen, the wlan-GigabitEthernet interface has the command:
switchport trunk allowed vlan 1-3,1002-1005
or
switchport trunk native vlan 2
I have tried both and although the router doesn't error, show-ing the config, neither commands have taken.
Is there something I am doing wrong or is this a bug in the IOS?
To save making this post long, my latest running configs are on my blog:
Router: http://www.thingsgeeky.walker.uk.com/?p=3781
AP: http://www.thingsgeeky.walker.uk.com/?p=3781
Many Thanks
W.

Hi,
I am trying to configure the Access Point module on my Cisco Router (897AVW), however I am unable to route / ping between the router and the AP.
In a few examples I've seen, the wlan-GigabitEthernet interface has the command:
switchport trunk allowed vlan 1-3,1002-1005
or
switchport trunk native vlan 2
I have tried both and although the router doesn't error, show-ing the config, neither commands have taken.
Is there something I am doing wrong or is this a bug in the IOS?
To save making this post long, my latest running configs are on my blog:
Router: http://www.thingsgeeky.walker.uk.com/?p=3781
AP: http://www.thingsgeeky.walker.uk.com/?p=3781
Many Thanks
W.

Does DW CC add CSS browser prefixes for you?

I've been playing around with a trial version of DWCC and set up a simple div with border-radius and a box shadow. It did not add any prefixes for the border-radius. For the box shadow it only added the -webkit- prefix, not -moz- etc..
Why does it not add the other prefixes?

You don't need them. Border-radius is widely recognized by all modern browsers now.
By & large, so is box-shadow, but I think the webkit prefix is more for the benefit of LiveView which uses an older webkit engine.
Nancy O.

Does 3.0 add iCal invitations?

Does 3.0 add the ability to send/receive meeting invites that are compatible with iCal from your iPhone? You've been able to do this for a while with Exchange, but it doesn't work with iCal on 2.2.1.

I saw that, but it doesn't actually say what I was hoping:
"Create meetings via Microsoft Exchange ActiveSync and subscribe to calendars with new CalDAV support."
It says you can subscribe to CalDAV calendars, which would presumably add Holidays and birthdays (would it add birthdays from your iCal calendar?), but it doesn't say anything about invitations, except for via MS Exchange.

SyncML what do i need at the server?

Hi all,
Is anyone here familiar with syncML for backing up data off a phone? What software does one need at the server to get it going?

A cgi, a php, a servlet, an asp, etc, etc, etc.
Google for "Java File Upload" and you can find a few examples on how to write the server side (or replace Java with the language of your choice).

How to add the Event.PASTE event on RIA Application container.

Hi,
I am creating the Web appliccation. but i need add the paste functionality over the application.
Once paste some content over the application caontainer. I want to check the Clipboard data and react based the content. If it should be text content i want to add the text object inside the work area and put the related content inside text object.
I tried Event.PASTE event in TextArea component, its working fine. but i need for main application.
It will very use for me.
Thanks
- Rajan

Hi Madhu,
Can you provide me more details on what to do with my situation?
I already have the program which is SAPMV56A but I don't know what to do after. Also can you tell me where I can find (table) the items on the Trans. Type list?
Thanks,
Eric

What Specific Firewall Rules are Needed for the DPM Server?

Hello,
We want to confirm which firewall ports need to be opened on the DPM server (not protected servers) for all DPM processes, so that we can set these rules in group policy. Below are what we
think are the needed rules. Note that we have rules for both new DPM 2012 installs and upgrades from DPM 2010 to 2012, since these use different program paths.
Rule Name
Program Path
Protocol
Local Port
DPM 2012 DCOM Port
Any
TCP
135
DPM 2012 AM Port
Any
TCP
6075
DPM 2012 RTM Agent Coordinator
C:\Windows\Microsoft Data Protection Manager\DPM\ProtectionAgents\AC\4.0.1908.0\dpmac.exe
Any
Any
DPM 2012 SP1 Agent Coordinator
C:\Windows\Microsoft Data Protection Manager\DPM\ProtectionAgents\AC\4.1.3313.0\dpmac.exe
Any
Any
DPM 2012 R2 Agent Coordinator
C:\Windows\Microsoft Data Protection Manager\DPM\ProtectionAgents\AC\4.2.1205.0\dpmac.exe
Any
Any
DPM 2012 AM Service Host (New Install
%ProgramFiles%\Microsoft System Center 2012\DPM\DPM\bin\AMSvcHost.exe
Any
Any
DPM 2012 AM Service Host (Upgrade Install)
%ProgramFiles%\Microsoft DPM\DPM\bin\AMSvcHost.exe
Any
Any
DPM 2012 DPM AM Service (New Install)
%ProgramFiles%\Microsoft System Center 2012\DPM\DPM\bin\DPMAMService.exe
Any
Any
DPM 2012 DPM AM Service (Upgrade Install)
%ProgramFiles%\Microsoft DPM\DPM\bin\DPMAMService.exe
Any
Any
DPM 2012 MSDPM (New Install)
%ProgramFiles%\Microsoft System Center 2012\DPM\DPM\bin\msdpm.exe
Any
Any
DPM 2012 MSDPM (Upgrade Install)
%ProgramFiles%\Microsoft DPM\DPM\bin\msdpm.exe
Any
Any
DPM 2012 DPMRA (New Install)
%ProgramFiles%\Microsoft System Center 2012\DPM\DPM\bin\DPMRA.exe
Any
Any
DPM 2012 DPMRA (Upgrade Install)
%ProgramFiles%\Microsoft DPM\DPM\bin\DPMRA.exe
Any
Any
Questions:
Are any of these rules not needed?
We know the Agent Coordinator rules are needed on protected servers. Are they also needed on the DPM server (including if we use secondary DPM servers)?
The DPM Configuring Firewalls TechNet page says DCOM uses TCP 135 and the RPC Dynamic ports. Does that mean we also need a rule that opens all TCP RPC Dynamic ports for
any program? Or is this not necessary since we have rules for msdpm.exe and dpmra.exe? Reference:
http://technet.microsoft.com/en-us/library/hh757794
What other rules may be missing, if any?
Note that we do not include rules for ports 53 (DNS), 88 (Kerberos), 389 (LDAP), 137-139 & 445 (NetBIOS) because we already open these ports in other group policy objects.
Also, the below forums post says two exceptions for SQL Server are needed on the DPM server to allow the Remote Administrator console to work. Is there any documentation in the DPM TechNet site on these rules?
http://social.technet.microsoft.com/Forums/en-US/aa88fd00-6836-46d3-8a93-edb487109118/dpm-2012-remote-administration?forum=dataprotectionmanager
Thanks,
-Taylorbox

Does anyone have any comments on this post? We would especially appreciate some input from Microsoft reps to help us ensure we're setting up the correct firewall rules.
Thanks,
-Taylorbox

After installing FF 6.02 on Windows 7, the icon does not appear on the desktop and the program does not appear in the All Programs menu

I just received a new laptop running windows 7 home premium and wanted to install Firefox on it. I tried to install the most recent version. When i installed 6.0.2, the icon did not appear on my desktop (it was a hidden file in my desktop folder) and the program group does not appear in the start menu's All Programs list. The program *does* run though, at least it did a few times. This happened whether i installed as administrator or not. Installing firefox 3.6.22, though, DID create the program group and desktop icon, and upgrading from there removed them again. installing other programs (e.g. vlc, trillian, etc.) did not cause this behavior. I also tried this both with and without McAfee's realtime protection running.

Some people have found that an app (usually iBooks for some reason) hasn't appeared on a homescreen until after the iPad has been reset and has restarted : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
Also depending on what the app is have you got an age rating set in Settings > General > Restrictions that is hiding it ?

Error: List View Threshold. The number of items in this list exceeds the list view threshold, which is 5000 items.

Hi, i had created a SharePoint List in cloud ( office 365) using List Template.
List template contains 12000 items taken as template from SharePoint on Premise.
I am getting this error message, in SharePoint Online (Office 365)
The number of items in this list exceeds the list view threshold, which is 5000 items. Tasks that cause excessive server load (such as those involving all list items) are currently prohibited.
How to resolve it, to get data in my SharePoint list, any help will be appreciated.

With O365 lists over 5k items are now officially supported but they will have limited behaviour due to the threshold. There are no workarounds or options to increase the threshold either temporarily, for specific users or for the list itself as you have
with on-prem.
You'll need to remove enough items to get it below the threshold limit, add indexed columns to support indexed views, then re-add the items again. This article is for 2010 but the section around indexed columns and views is still accurate:
https://technet.microsoft.com/en-us/library/cc262813(v=office.14).aspx
It may be possible to add the indexes on your on-prem list where you can increase/avoid the threshold, then re-export the list. That would rely upon the list creation script adding indexes before it uploads items but it's a logical assumption.

If VLAN 1 is the native VLAN, then does that mean thier can only be one?

If VLAN 1 is native, does that mean when you assign another VLAn to be native, VLAN 1 is no longer native and the other VLAN is? meaning you can only have one?

Let us start by being clear that the concept of native vlan is related to a particular interface doing trunking. If you have two interfaces doing trunking it is quite possible that the first one would have vlan 1 as native and the other one might have vlan 2 as native.
On a particular interface doing trunking it is quite true that there can be only a single native vlan for that trunk.
HTH
Rick

Reporting Services Add-in for Sharepoint- does it need an SQL Server license?

In a new project we will be creating an SSRS in Sharepoint integrated mode. For this we'll need SQL Server and Sharepoint on that box.
We'll also have one or more SharePoint Web Front End (WFE) servers. To allow them to connect to the SSRS-in-sharepoint-mode box, and to present the user with the right user interface for doing so, I believe we can install the Reporting Services Add-In for
Sharepoint on the WFE servers.
The question is, do we need to have SQL Server license for each WFE server where we use the Reporting Services Add-In, or is it free to use?
We've had advice that we need to buy a SQL Server license everywhere we use the add-in, but I am not sure this is correct.
Thanks in advance,
Rich

Hello there,
The Reporting service Add-in for SharePoint can be downloaded free on Microsoft Download site. That means it does not need any license on the add-in.
Regards,
Edward
Edward Zhu
TechNet Community Support

I still use Aperture 2.1.4. I need to export an image file with a CMYK profile. Whereas a generic CMYK profile is listed in ColorSync Utility, it does not appear on the list of profiles in the edit portion of the export preset dialogue. Help?

I still use Aperture 2.1.4. I need to export an image file with a CMYK profile. Whereas a generic CMYK profile is listed in ColorSync Utility, it does not appear on the list of profiles in the edit portion of the export preset dialogue. Help? Is there some way to add the CMYK profile to the list of choices that are available in the export preset dialogue such that I can choose it?

leonieDF
Thanks for your response. My profiles are located within color sync utility as you can see here:
These profiles do not respond to clicking and dragging. Since they are all in one place, more or less, I'm reluctant to make further attempts to relocate them. Accessing the CMYK profile is the first difficult experience I've encountered with this arrangement. I have never needed the CMYK profile until recently, and that need has now past. However, it remains a mystery to me as to why it does not appear with all the others on the menu of export choices in Aperture 2, or on the menu of profile assignment choices in the Preview application (where again all the other profiles are listed as choices). I'm beginning to think my current set up will permit me to view an image that was created in CMYK space, but does not easily assign, or convert to that space. I don't face these restrictions with all the others, so it remains a curious circumstance for me. I anticipate upgrading my computer and software in the near future which might alleviate this issue altogether. Again, many thanks for your attention to this matter. The reach of this community is astounding.

Does it need add the native vlan to allowed vlan list ?

Similar Messages

Maybe you are looking for