Does it play videos from the store?

Hi, this is my first post here. But I'm going on a trip tomorrow and wanted to get a movie to watch on the way there. I rented one and it says it cannot be played on my iPod. However I do have one episode of a TV show I got from the store on there and it works fine. Is it just that rentals do not work on this or do movies not work either? The model I have is MA446LL if that is helpful. Hopefully someone can respond to this, thanks in advance!

Rented movies play on iPod Classics and iPod Touches and iPhones, but not 5th generation video iPods as stated, sorry!

Similar Messages

  • I have just bought a MacBook Air and i cannot play videos from the internet as it asks for a flash player to be installed i try to download Adobe flash player and it will not allow me to do so?

    I have just bought a MacBook Air and i cannot play videos from the internet as it asks for a flash player to be installed i try to download Adobe flash player and it will not allow me to do so?

    Ziatron is correct that Flash does not work on an iPad, but it does work on a Mac. See Adobe Flash Player 11.2.202.160.

  • I bought a macbook pro on november 2011 wich had Lion OS installed on it. Playback plug-in in Mainstage 2.1.3 does not play files from the beginning (it leaves out like 50 mSecs or so). Is there a way to revert to Snow Leopard OS?

    I bought a macbook pro on november 2011 wich had Lion OS installed on it. Playback plug-in in Mainstage 2.1.3 does not play files from the beginning (it leaves out like 50 mSecs or so). Is there a way to revert to Snow Leopard OS?

    BrettGoudy wrote:
    ...Is there any way I can install a partition that runs snow leopard on my early 2011 MB pro with what I have (new SSD, New RAM, Current version Lion running, no external drive, lack of original snow leopard disks [I lost them ] and the general 10.6.3 snow leopard boot disks)...
    As the last post suggests, call Apple and order a replacement original disc for about $17.  They will ask you the model and serial numbers.
    Your retail version of Snow Leopard OS 10.6.3 will not work on that Mac as it requires a minimum of OS X 10.6.7 to boot and operate.
    Another alternative is to again borrow another Mac to install your retail Snow Leopard into an external HD or partition, upgrade it to 10.6.8 and then clone it back to a partition on your MBP.

  • When I try to play videos from the NYT, they don't load.  It just keeps spinning.

    When I try to play videos from the NYT, they don't load.  It just keeps spinning.

    How about an example?

  • How do you play videos from the "Videos" app in the background IPod 4G

    Hey
    I used to have an app which allowed me to play videos from the "Videos" app on my ipod touch 4th gen. But the other day I had to wipe my ipod and can no longer get this app. Is there any other app which imports your videos from the "videos" app or is there a way to play videos in the background using the "videos" app.
    Anny help will be greatly appreciated.
    Thanks
    Karl

    You can only play videos in the Videos app when the Video app is on the screen. Video, and any audio with it, do not play when using another app.
    You can try changing the Media Kind in Get Info>Option in iTunes on the computer to Music Video and see if that works

  • N96 only plays videos from the start

    My N96 only plays videos from the start. Whenever I press the 'play from where it stopped' function the sound works okay but the picture isn't there. Also the same problem occurs when I try to fastforward or rewind videos. As you can imagine this is not much use when I'm trying to watch a film in stages.

    Check out this site also:
    http://portablevideo.blogspot.com/2008/09/my-recommended-settings-for-n96-video.html
    640K Should be enough for everybody
    El_Loco Nokia Video Blog

  • IPad & iPhone only play video from iTunes store after iOS7 upgrade

    I just noticed that my iPad and iPhone can only play content from the iTunes store now that I have upgraded them to iOS7.  They can not even play videos that my iPhone recorded before the upgraded.  They are also not able to play videos that I RIPPED from DVD's using Handbrake.    It had no problem playing any of this content before upgrading.  I can still play the videos though iTunes just fine.  And my old iPhone that is still on iOS6 plays the videos just fine. Does anyone know of a work around to get iOS seven devices to play video that is not from the iTunes store?

    Thanks tried that as well as a full restore of the iPhone.  This seems to be by design.  ITunes will not even sync the files to the iOS7 devices now.  Says the files will not be copied because they can not be played, but my iOS6 devices can sync them and play them.

  • No video (protected mp4) after purchasing a music video from the store

    Hi,
    there is a strange problem found with the newest iTunes and (the newest) Quicktime:
    If I'm trying to preview a movie , the audio part is playing fine, but the Mac is only showing me a white (or black) window without a video content.
    The same problem happens if I'm purchasing a music video from the iTunes store- audio fine, but no video. To track the problem I have exported the video and tried to play it with the QuickTime player: still the same problem.
    All other videos and Video Podcasts are playing fine.
    It seems that I have problems with protected MP4 files....
    Any suggestion to solve this problem?
    The same videos are playing fine under Windows 2000 using the newest iTunes and QuickTime, only OS-X 10.4.9 (with all updates) on my G4 QuickSilver Dual 800MHz with 1.25 GB RAM and a Geforce 4Ti is giving me this problem.
    G4 Quicksilver 2002 Dual 800MHz   Mac OS X (10.4.9)   GeForce 4 Ti, 1.25 GB RAM

    Downgrading probably won't help; I asked because some people try to use a version of QT too old to play movies and videos from the iTunes Store.
    Your system is marginal for the minimum required specs which specify a 1GHz processor or better, but it should at least try to play the videos, though it might not be smooth? Do you have any sort of third-party codecs - Divx, 3ivx, etc. - installed? If so, try removing them, restart the system, and see if that helps.
    Regards.

  • Playing videos from the iphone to a tv or monitor?

    Can I purchase a cable or connector that will allow me to not only listen but view a video from the iphone to my tv or computer monitor? Where do I purchase such a cable? Thanks

    There are both composite and component out cables for the iPhone for sale at the online store:
    http://store.apple.com/1-800-MY-APPLE/WebObjects/AppleStore.woa/wa/RSLID?mco=228 360E7&fnode=home/shopipod/ipod_accessories/cablesdocks&nplm=MB128LL/A

  • Playing videos from the iPhone 4s to a projector - best way...?

    Ok, I want to connect my iPhone 4S to a projector via a HDMI cable. I will be playing a sequence of videos from the iPhone, so need to be able to skip through them when they're done, but WITHOUT any icons showing on the projector screen (if that makes sense! it's in a gig/onstage scenario). What's the best app for me to do this? If I did it in iTunes (under Movies) would the play/pause/forward icons be visible on the projector screen when I skip through to the next video?

    You don't sync but import them to your computer http://support.apple.com/kb/HT4083

  • IPod does not play music from the beginning

    Hi there!
    The music is properly good on the hard disk of the PC.
    The music is imported into iTunes, where it played well from the beginning.
    On the iPod, the music is also available.
    When playing the music now as follows:
    The title starts 6-10 seconds from the start, just after this time the song is played from the beginning, for about 6-10 seconds, then the title is a play on. Then from 12-20 sec from the beginning.
    I hope the wording is somewhat understandable.
    Thx for help!
    PS: "Remember Position" is not enabled; Start time on each track is 0:00

    Good evening everyone!
    The problem is solved.
    It was because of the ZoneAlarm firewall software!
    Somehow, the music is cut up by plan no why ...
    Firewall uninstalled, delete music from iTunes and the iPod, newly imported gesyncht = works
    Thank you very much for your attention!

  • Can't play videos from iTunes store after switching machines

    Symptom: my iTunes Library lives on an external drive. Recently I needed to send my primary MacBook Pro in for repair, so I authorized my backup machine successfully and used it in the interim. Upon the return of my primary machine, I did a fresh OS X install from the DVD (using the option to copy over my home directory from the backup machine in target disk mode), then used Software Update to install iTunes 7.2. The problem is that TV shows purchased from the Apple Store will no longer play on the primary machine, though they will on the backup. Double-clicking on their titles simply does nothing. In addition, TV shows cannot be added to the library after having been removed, and trying to open them in QuickTime Player causes that program to quit silently.
    Music, including purchased music, plays fine. The file paths shown in iTunes for the video files are correct, and permissions look right as far as I can tell. iTunes claims that it has been authorized successfully, though I have tried deauthorizing and reauthorizing it a few times just to be safe. I can't think of what else I could be missing. Any ideas?

    Update your Quicktime to v7.1.6.
    MJ

  • Software for playing videos from the Web

    Hi all,
    As a regular vistor of all sports websites especially, as well as your funnyvideoclips site etc, I am horrified that my N95 won't play any videos. Why can't the video player used for watching movies I've actually taken be used. Even on BBC's site I cannot view interviews or actual sports footage.
    I'd be grateful to know what my options are and in the most basic of terms as I'm not technically proficient - or good at spelling.

    Open the Video Center, and go select the optional Internet feeds. More and more are being added from time to time.
    Reuters
    YouTube mobile http://m.youtube.com (just use this address in your browser)
    SonyPictures
    FreeBee TV
    Google Video (download the ipod or PSP version of the video it should play correctly)
    Also use Podcasting application to subscribe to Video Podcasts.
    Some websites that stream in RealPlayer mode can be watched with N95. But if they stream Flash (FLV) or WMV then it's a no go.
    Hope this helps.
    640K Should be enough for everybody
    El_Loco Nokia Video Blog

  • Ipod 5thGEN 1.2 won't play tetris from the store

    Hi there,
    maybe someone knows about the latest games....
    I just bought tetris from the itunes store and i got the message from itunes(7) , that I am not "allowed" to play this game on my ipod ( 5th gen and 1.2) - it is not even copied on my ipod.....
    thanx'n greetz from germany/hamburg
    pb
    macbookpro/g5   Mac OS X (10.4.7)  

    Hello lc_llc,
    Double check each track to make sure the *Remember Playback Position* option has not been abled from under the Options tab of the track's *Get Info* window in iTunes.
    B-rock

  • How to reference/play video from the MicroSD card

    I am developing an interactive video application using AIR on Android and need to store media on an external MicroSD card.  How do I access that file location in AIR?  I have tried:
    /mnt/Removable/MicroSD/
    /mnt/external1/
    etc. 
    Is there code similar to:
    var myFile:File = File.documentsDirectory.resolvePath("Test Folder/test.txt");
    That would allow me to reference the external storage?

    OK...I am highly confused.  And I think you are a bit confused too...adding to the confusion.
    Log and CAPTURE is for capturing from tape. If you aren't capturing from tape...but rather an SD card...do not use Log and CAPTURE.  Tapeless capture uses log and TRANFER.  That's what I mention in that tutorial. 
    >How do I set up the preferences so that I get the capture window that shows the clips that I can import (capture) from my SD card?
    Watch the video again. You open Log and Transfer...click on the folder icon on the upper left...and then navigate to the backup of the card you make.  The FIRST step is to back up that card.  Then you use L&T...and direct it to the root level of the backup folder.  You click OK and all the clips in that folder will appear in the Log and Transfer window.
    >I keep getting prompted with a message that my HDV deck is not connected.
    Because you are opening Log and CAPTURE.  Again...log and transfer is what you want.
    >I'm just trying to have my video be captured wirelessly from the SD card into FCP.
    Sorry, you can't do that. You cannot do this wirelessly. You need to connect the camera to the computer with a wire...typically USB.  OR...you take the SD card out and either use an SD card reader connected to the computer via a cable (USB), or if you have a laptop with an SD card slot...well then, that would be wireless. Just slap the card into the computer and watch it show up on the desktop.  Then back up the footage, then Log and Transfer.
    >It's got to do something with setting it up in wither Easy Setup menu or one of the others.
    No. You do not need to use the Easy Setups. That is for tape capture. You determine what codec you will be converting to in the Log and Transfer preferences. Watch the video again...I explain this thoroughly.

Maybe you are looking for

  • Reading password protected pdf email attachments

    When I open a password protected pdf file that was attached to an email received on my iPhone, it appears to open (accurate page count displayed top left corner) but the page is blank and I never see a prompt that asks for the password.

  • Create a object in form of circle, line, triangle or other shapes

    i am trying to make a program that creates simple objects, its just a hobby. the problem is i am trying to make an object that is only a line(for now). i mean i want to have an object that can be in a shape of anything in any angle. i like to be able

  • WHEN-LIST-CHANGED Triggers Works Only Once ??

    hi i have a form with the 2 list ITEMS And i have some trigger WHEN-LIST-CHANGED For the first LIST item which Populates the Second List Based on the Value selected in First List Its Works Fine For the First time. But for second time Onward , it Does

  • Deleting Folders/Applications that are NOT locked

    I downloaded Windows Media Player online and would like to delete it, but when I attempt to it's saying that certain applications/folders are locked. I then looked at each relevant app/folder under "Get Info" from the pull down menu but it was showin

  • ADS Config error

    Folks, We are trying to Configure ADS on SP14 and when we try to Configure the credentials( PK12) , and<b><u> /usr/sap/<SAPSID>/SYS/global/AdobeDocumentServices /TrustManagerService/trust/credentials directory</u></b> is missing. We are only able to