Does it support install OEM12c with OEM12c ops center into same machine?

Hi,
I'm not familiar for OEM and OPS center.
- Does it support install OEM12c and OEM12c ops center into same machine?
- Would you please share any hardware / OS in OEM12c and OEM12c ops center?
Thanks.

Holger,
Thanks for the reply, that was useful.
I posted this message in service markeplace, and got a reply from SAP, and they do not have out of box solution. Since the project is on aggressive schedule, may be this issue, which involves lot of devlopment needs to tackle in next proect cycle.
Qustion regarding the Apache was also resolved. Reply from SAP is posted below.
Thanks,
Durga
HI Mr Durga,
Can a user say "abc" can have different content displayed while he
logins from Internet or intranet.
This feature is not provided with the standard Delivered NWO4 suite.
I would ask you to take this query in the sdn forum,as these type of
questions are answered by SAP consulting guys.
As far as multitenant EP is concerned,
Based on ramp-up experience and customer feedback, SAP has decided to
not release the IT scenario variant "Implementing a Multitenant Portal"
for general availability after SAP NetWeaver 2004s ramp-up.
Refer to the documentation link
http://help.sap.com/saphelp_nw2004s/helpdata/en/44/
615ad7dfeb4688e10000000a11466f/frameset.htm
Second question:
Does Apache installation is supported on the Virtual machine.
Installation of Apache as DMZ is not Recommended by SAP.
SAP Recommends SAP Web Dispacher.
But SAP supports to a certain extend,if the client is using Apache.
Please refer to the attached Note
Note 480520 Integration of SAP J2EE Engine 6.20 / 6.40 with Apache

Similar Messages

Does WLS support Debugging Servlets with JBuilder 3 ?

I have read all the news groups and it appears that WLS 4.5.1 does not
support debugging Servlets with Jbuilder 3.0.
I am using the trial version, does this matter ?
Or should I just buy another web server ?
Joe

I think below documents will be helpful to you.
http://docs.oracle.com/cd/E23943_01/apirefs.1111/e13952/taskhelp/webservices/webservicesecurity/CreateDefaultWSSConfig.html
This document tell you that you can attach a weblogic webservice configuration using weblogic admin console.
After creating this configuration you need to updated this configuration as per the steps given under :
Use X.509 certificates to establish identity
Thanks,
sandeep

Does NFS support Oracle RAC with TAF ?

Hi,
Does NFS support Oracle RAC with TAF feature. ?
If yes, please point to some valid document to prove the same.
Regards
Sumit

TAF has nothing to do with the underlying storage architecture and is therefore 'supported' with your choice of asm, raw devices, cluster file system and NFS. NFS is supported on some platforms. For more details, check the certify tab in metalink. Some information can also be found here
TAF will be available on any rac installation, but not all drivers support it (jdbc-thin for example)
Bjoern

Does N9 support 802.1x with LEAP and have Vietname...

Hi all,
I'm from Vietnam and using a N9 phone. I have some question:
1. Does N9 support 802.1x with LEAP like E-series? When are you launching?
2. Does N9 support Vietnamese language/keyboard/typing? When are you launching?
Please inform me soon
Thanks.

and how about Lumia serires?

Does not support public parts with purpose assembly...

Hi,
When building a component, I'm getting the following error:
Server Component/Library DC does not support public parts with purpose 'assembly'.
Error: Build stopped due to an error: Server Component/Library DC does not support public parts with purpose 'assembly'.
Build plugin finished at 2011-03-24 12:12:40 GMT+01:00 (CET)
Total build plugin runtime: 0.311 seconds
Build finished with ERROR
To be more precise, one dc uses another from a public part that is "assembly" - so it's made the way it should be (both dc's are libraries, one java dc and the second one is server library)

Hi,
we are with NWDS 7.20 but afaik the "J2EE Server Component Library" in your version was replaced by Enterprise Application DCs in the meantime, so it is quite simple:
An assambly PP on a J2EE Server Component Library really does not make sense. The J2EE Server Component Library is the final assembly unit. You may use such a DC in two ways:
1. You want to use the classes that are bundled into the J2EE Server Component Library for compilation in another DC (Java or EJB). To achieve this you may create a COMPILATION PP on the J2EE Server Component Library that references compilation PP e.g. of your java DC. (The alternative is to let the using java DC directly reference the compilation PP of your Java DC.)
2. You have another assembly unit - e.g. an Enterprise application or another J2EE Server Component Library - that needs the classes in your J2EE Server Component Library at runtime. This is done by an application reference (in 7.20 defined in META-INF/application-j2ee-engine.xml of the DC that uses your J2EE Server Component Library). At runtime, the result is that your (initial) J2EE Server Component Library is the "parent class loader" of a using DC.
So indeed, there is no need for a PP of type assembly for a J2EE Server Component Library. This DC does not contrubute anything for assembly into another DC.
Rework your dependencies and PPs. [This PDF document|http://www.google.de/url?sa=t&source=web&cd=21&ved=0CBwQFjAAOBQ&url=http%3A%2F%2Fwww.sdn.sap.com%2Firj%2Fscn%2Findex%3Frid%3D%2Flibrary%2Fuuid%2F60d99678-1a29-2d10-94b4-9d9a67b7199b%26overridelayout%3Dtrue&ei=C1aSTZzgHsj0sga6l53QBg&usg=AFQjCNFGx2NeVkfWlnh0wGKsMasL95g18A] may be helpful.
Cheers,
Rolf

I can pair my iPhone 4 with my MacBook and my Macbook Pro but they will not connect. My iPhone keeps telling me it does not support this even with bluetooth turned on.The devices section keeps searching all the time

I can pair my iPhone 4 with my MacBook and my Macbook Pro but they will not connect. My iPhone keeps telling me it does not support this even with bluetooth turned on.The devices section keeps searching all the time. Is this an antenna problem? Or something else ?

Your iphone is right, it is not supported. The iphone's bluetooth protocols do not include file transfer, but are intendes only for headsets, stereo headphones, cars, and keyboards.

CAN I INSTALL BOTH (ORACLE 9IAS AND ORACLE DATABASE )INTO SAME MACHINE.

oracle 9ias and oracle 9i database in same machine Feb 25, 2003 11:22 PM
Reply
Dear Friends,
I installed oracle 9ias. and then i hosted my form,report into that server . All was working properly.
at this time my database was into another machine.
then i installed oracle 9i database into the same machine
(as the oracle 9ias was installed)
at the instalation of oracle 9i database one error comes
and shows that Agent configuration Assistant Installation
fail.
but After installation of database it work properly.
there is no problem.
but when I try to run from through web(by using oracle 9ias)
it gives Internal error(500).
i check and find that my appache server for 9ias is working properly and in services of windows 2000 no error comes.
HOW CAN I INSTALL BOTH (ORACLE 9IAS AND ORACLE DATABASE )INTO SAME MACHINE.
With regards
Siddharth Singh
[email protected]

Hi James,
Have u ever tried ORACLE 9iAS R2 on Redhat Linux ?
If yes what is the version of RH Linux you were using ?
Any docs for that ?
[email protected]
Regards
Amudharasu

Is it possible to install Oracle 9i and SQL server on same machine

1. Is it possible to install Oracle 9i and SQL server on same machine ?
2. If yes, what are the problems i may encounter during installation
3. What should be hardware configuration for installing both databases in same machine like hard disk space, RAM speed etc,

Hi,
1. Yes you can do it.
2. There shouldn't be any problems
3. Depends on your needs
Jarek

Photoshop Elements installation failed: Installer does not support install on a 64-bit operating system

Purchased Photoshop Elements 13 from Adobe through Amazon as a download. It said one of the requirements was a 64-bit operating system. Okay. Downloaded fine. I have a Dell Inspiron 15 with a 64-bit processor. Initialized Adobe installer, put in serial #, pressed install. Installation failed: error msg - Installer does not support installation on a 64-bit operating system. Please download the 64-bit version of Photoshop Elements. Help.

download the 64 bit installer
Downloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
Lightroom: 5.6| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

Lexmark does not support USB printing with Airport express

See email from Lexmark:
Hi Herman,
Welcome to Lexmark e-mail support. I appreciate your query into Lexmark.
Lexmark Inkjet printers are host based & work only USB attached. Currently Lexmark International does not support Airport Express on these printers.
If you have any more questions or concerns, please contact me at your convenience and I will be happy to assist you. (If I am not available, another representative will reply to you as soon as possible.) To respond, please select "Reply" in your e-mail software, and be sure that the past e-mail is included in this reply.
Regards,
Arshad
Lexmark Technical Support
***Original Message***
On Sun Jun 18th 03:20:53 PM EST 2006, hernan.
Dear Mamta,
Thank you very much for your support. I already tried what you
mention, but still without success. I downloaded again the x1100 all
in one driver but still I can't print.
Any suggestions?
Thank you,
Hernan
-----Original Message-----
From: [email protected] [mailto:[email protected]]
Sent: Sunday, June 18, 2006 7:30 AM
To: hernan
Subject: Re:Lexmark Technical Support (Req# 942782055)
Dear Hernan,
Thank you for contacting us regarding this matter. I appreciate the
opportunity to assist you, and I hope my suggestions will provide a
resolution.
Please follow the steps given below:
1. Click on "Start," "Control Panel" and "Printers and Faxes."
2. Right click on the Lexmark printer icon.
3. Click on "Properties."
4. Click on "Ports" tab.
5. Place a check mark against "Enable Bidirectional Support."
6. Click on "OK."
You may copy and paste the web address given below to access the
Lexmark 1000/1100 Color Jet printer Windows XP driver:
http://downloads.lexmark.com/cgi-perl/downloads.cgi?ccs=229:
1:0:1:0:0&emeafr
ame=&fileID=1580&searchLang=en&searchLang=en
Please use the following steps to download the Lexmark 1100 Color Jet
printer Windows XP driver to your desktop:
1. Click on "Download Now."
2. On the "File Download" screen, choose "Save."
3. The next screen will be titled "Save As." Choose to "Save in
Desktop"
and click "OK."
4. You should see files being transferred.
***Note*** If your browser uses a different file downloading format
than specified above, you will need to resort to your browsers help
files for downloading instructions. The object of steps 1 - 4 is to
download the driver to your desktop. This way it is easily accessible.
5. Once the files have completed downloading, double click on the icon
with your file name.
6. On the "Win Zip Self-Extractor" screen click "OK."
7. To unzip the downloaded file choose "Unzip."
8. A screen will then display the number of files unzipped
successfully, click "OK."
9. Please follow the on screen instructions to complete installation
of your Lexmark printer.
If you have any more questions or concerns, please contact me at your
convenience and I will be happy to assist you. (If I am not available,
another representative will reply to you as soon as
possible.) To respond,
please select "Reply" in your e-mail software, and be sure that the
past e-mail is included in this reply.
[AOL Users: In order to include the previous e-mail, you must
highlight it with your mouse when you are replying.]
If you need to reply, please be sure to include in your message all
information from prior e-mail messages & replies. If your e-mail
client automatically deletes prior e-mail thread information, it will
cause a delay while we look up your support history. If this is the
case you may want to save the old e-mails as attachments and attach
them to the current e-mail.
Sincerely,
Mamta V
Lexmark eSupport Team
http://support.lexmark.com
Rate Your Support Experience! Your feedback is extremely valuable to
us.
Please click the link below to participate in the Lexmark Customer
Support Survey.
http://support.lexmark.com//cgi-bin/survey.cgi?getSurveyID=7
07&getSurveyName
=
***Original Message***
On Sat Jun 17th 06:20:55 AM EST 2006,
hernan.>
I purchased the Apple airport express that connects
multiple
wireless-networked PCs to a usb printer.
is there a driver that can make this work?. I configured
the printer
according to the manual, received a test page and so on, but now it
takes ages to start printing and printing never gets to 100%
completion but to 99%. I am not able to cancel printing jobs and this
is a whole mess.
Best regards,
Hernan
vaio pcg-6c2l and IBM x40 Windows XP Both service pack2

Did you have a question?

Does BOXI support crystal reports with parameter references in formulas?

I am designing a report in Crystal Reports XI Developer that contains parameters, which are passed to a stored procedure and are also used within formulas ( in Crystal Syntax ie. {?FORMAT_ID} ) in the report itself.
I can run the report successfully in CRXI Developer. The formulas use the correct values from the parameters entered during execution and everything looks good.
I then deploy the report to Business Objects Enterprise XI. I do all of the things necessary to manage the report including setting up the proper database connection information and default parameter values.
When I run the report using the Crystal Report Viewer, I get the following error message:
Error in File Forecasting.rpt:
Error in formula <Report Format>.
'if (not isNull({?FORMAT_ID} ) ) then
This field name is not known.
Details: errorKind
This happens when I press the "Preview" button in the Manage Object dialog from Crystal or when I run the report using InfoView.
I have changed the formulas and it doesn't seem to matter what the specific content of the formula is; other than the existence of a parameter reference in the formula. If I comment out the parameter and replace it with a hard-coded value, it gets through the formula fine.
Does Business Objects Enterprise XI support crystal reports with parameter references in the formulas?
Thanks,
Tim H.

Hi,
In Crystal Reports under File -> Report Options >check convert Null Values to default > Verify on first refresh > Verify stored procedures on first refresh.
This corrected the issue by allowing the query engine time to locate those columns and map them to the query being sent by the report.
The convert null values was added because those field were being used in the record selection and grouping.
Regards,
Vinay

Hosting company does not support SQL query with OUTFILE clause

From my mysql database, I want to allow the user to run a query and produce a csv / text file of our membership database. Unfortunately, I just found out my hosting company does not support the SQL query with OUTFILE clause for MySQL database.
Are there any other options available to produce a file besides me running the query in phpadmin and making the file available to users.
Thanks. George

Maybe this external Export Mysql data to CSV - PHP tutorial will be of help
Cheers,
Günter

Ios email app does not support user name with multiple "."

I have two gmail email addresses and have both set up on my ipad, however the ios email app cannot connect to the gmail server for one of the two accounts. Account settings are strictly identical and connection from the Gmail app works fine. The only difference I could find between the two accounts is that the one with connection issues uses a format of "[email protected]" whereas the one that works fine is "[email protected]". Is it a known bug that the ios app does not support the first format?
Thanks

Yes, double dots/periods are not allowed.

Does iphone supports blutooth sharing with non Apple devices?

Does iphone support sharing with non Apple devices?

For that matter, it doesn't support bluetooth sharing with Apple devices either... except app to app connections that are specifically coded to communicate directly.

My Satellite A100 does not support SDHC cards with the internal card reader

Hi,
My satelite A100 does not support my sandisk 4 GB SDHC card.
"normal" SD cards are not a problem with the internal card reader, and there are no problems with the sandisk 4 GB SDHC card using a external card reader.
is there a software solution?
regrads,
Itock

I do not have time to read users manuals for your notebook model but all supported cards can be listed there. I suppose SDHC is not listed and not supported.
I do not know what you mean with software solution but, as far as I know, update for multimedia card reader is not available.

Does it support install OEM12c with OEM12c ops center into same machine?

Similar Messages

Maybe you are looking for