Does it support Samsung CLX 3170 Laser printer??

i do installed drivers from Bonjour, when i tried to print, i could heard machine warm up sound, but can not print out, so i think maybe it not support my printer, isnt it?
help to solve....
System: Windows XP SP3 and 7 both tried.
Message was edited by: kfc_zjian

You can try looking on these 2 sites for a driver.
Gimp - Print
HPIJS for Mac OS X

Similar Messages

Is there a driver for Samsung CLX-3170 that works with OS 10.9.4 ?

Since I installed Mavericks my Samsung CLX-3170 Colour laser printer does not work properly. Is there a new driver for this ? I had a long chat with Samusng help desk that was totally inconclusive. Trying to re-install the printer I was told that there is no driver currently available. HELP !

You can try looking on these 2 sites for a driver.
Gimp - Print
HPIJS for Mac OS X

Samsung ML-2010 Laser printer not working

I just hooked up my new 802.11n Airport Extreme base station, and I can't get my samsung ML-2010 laser printer working with it. The Airport Utility recognizes the printer, and bonjour installs the printer on the windows machines, but when I go to print, nothing happens. Is there a list of compatible printers for the 802.11n base station?

flemingljr, Welcome to the discussion area!
Is there a list of compatible printers for the 802.11n base station?
iFelix has started a list. Since the device has been in the wild only a few weeks the number of user experiences with varied printers is still small.

Samsung ML1665/XEU Laser Printer or Software Problem

Some while ago for no apparent reason my printer started printing a series of large font commas down the left hand side of the page. These are about 13mm in from the edge and about 23mm apart. After another week another series of marks appeared. These are only 3mm from the LH edge of the page and the same distance apart. These look like headphones standing on their side (or an oval with a gap at the right hand side)
I've reinstalled the printer driver but it makes no difference. I've called the Samsung helpline but they are baffled. Could this be a problem with Mavericks and/or iWorks09 being incompatible with Samsung? Unfortunately, I can't remember if the marks appeared after downloading these updates or not.
Any ideas would be much appreciated.
Thanks

ARTWRX wrote:
Ever since OSX 10.5 my printer options are either unavailable or ignored when I choose them. I have a Canon i9900 inkjet, Kyocera Laser Printer, Toshiba B&W Copier, Toshiba Color Copier, and a RIP for a platesetter on my network. I can't select the second tray on my laser printer, it is grayed out. When I select landscape feed on my copiers it is ignored and I must feed the paper portrait direction.
There was a problem pre 10.5.2 that orientation and, I believe, the paper tray settings, were lost when printing to a windows shared printer. I am not sure if that is your setup, but your descriptions makes it sound like it might be.
http://discussions.apple.com/thread.jspa?threadID=1389748&tstart=0
Hope this helps.

Does it support transparency when you want print album on iphoto 11

i want to try to print an illustrator draw that i made on an album and on cards but i am worried to loose the transparacy and have a black background does anyone have tryed this kind of thing ? does it support transpiracy for printing apple card and album

Did you Preview it?
To make a PDF file using the background shortcut menu:
Open the book project, open the card project, or open the calendar project.
Press the Control key while you click in the background of your project.
Do one of the following:
Choose “Save Book as PDF,” “Save Card as PDF,” or “Save Calendar as PFD” from the shortcut menu. In the window that appears, enter a name for the PDF file, enter a location to save the file to, and then click the Save button.
Choose Preview Book, Preview Card, or Preview Calendar from the shortcut menu. The Preview application opens and shows a PDF file of your project. You can save it just as you would any other document.

Samsung CLX-2160N Network Printer - How?

All,
Thanks in advance for the support I know you'll be able to provide. Here's my trouble.
I have a CLX-2160N printer from Samsung that I am trying to get connected to. It is running on my network, at the IP address 192.168.1.18. I've tried installing it via the Samsung Universal Print Drivers installation and via CUPS/Gnome Print manager. They all detect it just fine, but never are able to finish the connection. I don't know what I'm doing wrong.
Any good guides or advice to make this work? I've tried a couple of the HowTo's for other Samsung Printers, but I've yet to make it work.
I welcome any advice you may have.
Thanks again in advance,
Dave

Alright..... It took me a few days to find where "Image Capture" is on my French OS. Here it is called "Transfert d'images"!!! Fun, fun, fun....
Now, let me try to clear a few things:
- I never said I use a wireless network. I use wired Ethernet.
- As far as I understand the quote I posted last time, VewScan is compatible with the Samsung scanner when connected trought USB.
I tried Image Capture. I read the help file. This soft can find only USB, Firewire or SCSI connected scanners, and eventualy..... a connected scanner to an wired computer as long as it is OS 10.3, same mask as the main Mac...
Image Capture does searches on the computer and on the network, but it sees only what an OS X shares.
Kappy, I'd love your ideas to work, but I think it is not for this time!
Thank you, -Yves.

Can no longer print to a Samsung CLP-310 laser printer since upgrade to LR 4.3

Sometimes I need to print a draft photo to the Samsung for various reasons. I have had this printer for 4 years and never had a problem printing from LR until now. The printer will go on, go through its cycles and then shut completely off and then come back on and eject a blank sheet. I can print from any other program including photos from Aperture without any issues. Only since LR-4 had I had this issue.
I tried many settings such as smaller scale pictures, draft mode, etc., to ensure I was not exceeding the Samsung printer's parameters. Again, this printer worked since Lightroom Beta. LR-4 prints great photos to my Epson inkjet printer w/o any problems. Any ideas what changed? Thanks! Andy

I should probably rephrase my question:
Has anyone had a printer of any kind that worked fine until the latest LR version and were you able to fix it without resorting to printer specific methods (drivers, etc.)? If yes, what adjustment did you make to correct this? If there is one, it might be universal.... thanks!
My computer is an iMac... thanks!

FireFox 4.0.1 does not support HP Simplepass Identity finger print scanner?

The previous version of Firefox would work with my HP Simple pass (finger print scanner built into the laptop) to be used as a password for all web sites that require a password. Firefox 4.0.1 does not know what to do when I scan my finger print on a login page. Can I remove Version 4 and go back to the old version that worked?

Please do not mind my first error, the one about the Finger print Scanner. \
But please help me with the USB problem.

How do I setup a Samsung CLP300 color laser printer

I got this from a friend at work. I am running Tiger on my mac. I plan to update to Leopard soon, so I hope I can use this printer with either OS version. I got it home and hooked it up to one of my macs. It comes up with the name "Adobe PDF 8.0". When I go to the printer setup in System Preferences, it says it is unknown. It show up as a printer. When I try to print to it, nothing happens. Am I missing something? I think my friend said there was a CD that came with it. He is going to try and find it.
Any help would be greatly appreciated.
Thanks

Baby Boomer (USofA) wrote:
Repair permissions and then restart your computer afterwards.
!http://i50.tinypic.com/izvwo1.gif!
Tried this but it didn't fix the problem.
When I go into Print Utility and click "Add" I get back "Adobe PDF 8.0" as the printer name. If I click on it, I can not set the "Model". The Samsumg CLP-300 installation section says that it will show up as "Samsung", and I should enter the model number...
Not sure what else to try. Anyone else have any ideas?
Thanks

Does it support samsung galaxy tab?

thinking of purchasing the samsung galaxy tab but need confirmation on its availability on this tablet

I see that this thread is already old. Firefox 9 is now available in Galaxy Tab and as I have experienced, performance is quite frustrating. Most of the time, it causes my tablet to crash and I have to force shutdown.

After upgrading to Mountain Lion 10.8.2, I cannot print to my Samsung laser printer ML 2525w? How can I get this set up to print?

After upgrading to Mountain Lion 10.8.2 on my iMac, I cannot print to my Samsung B&W Laser printer ML 2525W either by USB or wireless. Any help on how to setup or reconfigure would be apprecaited.
I either print blank pages or prints one time then goes off line, or spits out a bunch of blank paper, etc. Have gone through all the standard fixes, reboot, reset , reload driver, etc.

From the link to the Thread you provided, I worked through the one message procedures that were listed.
For ease of reference, I have copied them and printed them below. This was an old thread but the guidance still works with no firmware upgrade required.
I would stress that you MUST delete any and all files relating to USB connection of the printer to the MAC, including all print drivers (from both Apple and Samsung either from CD or web downloads) and all print queues, etc. I was only able to get the printer to properly hand shake with my Mac by setting it up wirelessly after all old files were deleted with hard power off reboots on both the Mac and Printer.
I hope that someone from Apple will pass this note along to their programing department because there is some type of incompatibility in the new ML OS and the Samsung ML2525w print dirvers used for a cable (USB) type connection. Apple needs to be talking to Samsung to get the USB issue resolved. I am going to post this same message on the Samsung site to see if someone from there will contact Apple to work together on a final solution for USB connectivity.
Here is the steps I followed to get my ML2525w to work in the wireless mode. Again, I cannot stress the need to clean out all the old files (drivers, print queues, etc. - everything) before setting up wirelessly.
As a note, I ran this printer with Lion for almost 2 years and it always worked fine (both wireless and USB). From other comments on the thread, users were good with this printer using Lep. and Snow Lep also. - - no issues from either a USB connection or wireless until Mountain Lion.
Before the fix, I was experiencing many of the same issues as described on user chat threads, printer going offline after a print job. 1st page sometimes printing but all the rest of the pages were garbage. No printing at all. Printer just running a bunch of blank pages out. etc.
I run an iMAC 27" desktop with the ML OS upgrade just installed from Lion.
"I've just installed one of these printers for my parents.
First of all, don't waste your time connecting the ML-2525W as a USB printer. The printer will go offline after each print job. It's hopeless, at least (I assume) until Samsung gets around to publicly releasing a firmware update.
Instead, you have to use the ML-2525W as a wireless printer. In that mode, it works fine.
This is what I did:
(1) First, if you have already attempted to install the Samsung driver software from the included CD-ROM, uninstall it. Get the uninstaller from the Samsung support site:
http://www.samsung.com/us/support/downloads/ML-2525W
Download the "Printer Driver (ver. 4.0)" ZIP file. It unzips to a folder that contains the uninstaller. Likewise, download the "Smart Panel Driver" ZIP file and uninstall the Smart Panel software.
(2) Disconnect the USB cable from the printer, if it is connected. Pull the power plug on the printer and power cycle it.
(3) Restart your Mac.
(4) Go to the "Printer Driver (ver. 4.0)" folder that you previously unzipped. Inside it is a folder named "WirelessSetting". Open the folder and run the "Wireless Setting.app".
(5) The application will ask you to connect the USB cable to the printer. Do so, and the Mac should be able to communicate with the printer to perform the wireless setup.
(6) The application will show you a list of wireless networks. One of them is the wireless interface in the printer (ad-hoc). You can ignore that unless you intend to use the printer without connecting to another wireless network. In my case, I selected the wireless network in my parents' home (infrastructure) and entered the security passphrase. The application then configured the wireless interface in the ML-2525W to connect to the home network.
(7) The Wireless Setting application will then tell you to disconnect the USB cable.
(8) After finishing the Wireless Setting application, go to Word, Textedit, Pages, or Safari, and select a file or page to print. In the print dialog window, you should see the ML-2525W as a "Nearby Printer" (i.e. via Bonjour). Select the ML-2525W, and your Mac will automatically connect to Apple's Software Update and download the latest Samsung driver. If for any reason the Software Update download does not succeed, you can manually download and install the Apple driver using the previously published link in this discussion.
(9) After that, you should be able to print to the ML-2525W whenever you want, without the printer going offline.
(10) If you have a USB printer queue still in your Print & Fax Preferences (from your previous unsuccessful attempt to connect via USB), you can delete it. You only need to keep the Bonjour queue.
Obviously YMMV, but in my case this procedure got the printer working reliably without the need for a firmware update."
MacBook (white 12"), Mac OS X (10.6.5)

Trouble printing with Leopard and Samsung USB laser printer

I just purchased a Samsung SCX-4200 laser printer/scanner/copier. After installing 10.5-compatible drivers from the Samsung website, I'm unable to get the printer to work. Print+Fax recognizes the printer fine and the proper driver appears in the pulldown menu so all seems good there. But every time I go to print a document (I've tried numerous apps), the job begins spooling to about 6%-8% (depending on document tried) and then I get a message in the queue window that says 'Waiting for USB printer to respond.' and the job just hangs there. The job list shows the document as printing and the Print+Fax window shows the printer as in use, but no matter what I try, this thing just won't print. I've tried restarting the computer, rebooting the printer, an older version of the drivers that came with the printer (says OS 10.3-10.4 only) and myriad other tricks, but no dice.
Anyone have any advice? Thanks!

Well to follow up I finally heard back from Epson support...this was the response (note that it says nothing that I did not tell them already).
Thank you for taking the time to contact Epson. It is my pleasure to
respond to your inquiry. Color management is an art, make sure that only
the application or the driver is handling the management. Turn off the
management in the driver if you are allowing Photoshop or other software to
handle the color management. Also make sure when you are allowing
Photoshop to handle the color that you select the proper printer profile.
It's very hard to help with color management via email, you may want to
check some of the on-line color management websites on google.
David P
EPSON Professional Graphics Support Team
Totally useless as I explained in detail that I had already done all of this and was very familiar with color management and the process of using it. And that it was not until the latest OS-X and Epson's driver that the problems started.

I HAVE A SAMSUNG LASER PRINTER AND CANNOT GET SOFTWARE FOR IT

I have a Samsung CLP 315w Laser printer it ran out of ink changed the toners and it has not worked since I have tried uninstalling it but when trying to configure again it says software unavailable any help welcomed

This is the Apple iPad Support forum. Samsung's support site is here:
http://www.samsung.com/uk/support/download/supportGlobalDownloadPrdDetail.do

Printing pics to a Samsung CLX-6200

I just bought a new Samsung CLX-6200 laser color, multifunction printer. It has a multi purpose tray which I load with 4x6 photo paper. I am not able to figure out in Snow Leopard how to change the paper size and select this tray. Can anyone help please?
Thanks!

InspGadget wrote:
I am not able to figure out in Snow Leopard how to change the paper size and select this tray.
In the Print Dialog, you can select the appropriate paper using the Paper Size menu underneath Copies and the page range fields. If you do not see this menu, and you have expanded the dialog box using the disclosure triangle to the right of the printer's name, what application are you using? To select the tray, select the Paper Feed panel in the menu that has the application's name.
Hope this helps.

Samsung laser printer error msg on Mac Mini since update

samsung ml-2955DW laser printer throws error msg - rasterosec, filter - since recent update to OSX 10.8.3, but *only* when printing in Word for Mac. have deleted printer and reinstalled twice. no luck.
any ideas?

candace200 wrote:
samsung ml-2955DW laser printer throws error msg - rasterosec, filter - since recent update to OSX 10.8.3, but *only* when printing in Word for Mac. have deleted printer and reinstalled twice. no luck.
any ideas?
Microsoft for Mac Support

Does it support Samsung CLX 3170 Laser printer??

Similar Messages

Maybe you are looking for