Does it work internationally?

Hey does Facetime work internationally the way skype does?

I don't know about Skype, but facetime works just fine internationally so long as both ends are on wi-fi.
I used it from France to UK this week, Macbook to Macbook and Macbook to iphone 3 and 4.
Excellent tool.

Similar Messages

  • HT3529 Does iMessage work internationally?

    Does iMessage work internationally if both parties are connected to internet?

    I experimented and was finally able to get it done.  Thanks for the response.

  • Lync 2013 mobile app does not work internally, SIP domain is Different than users UPN. not sure if that matters.

    using the lync client connectivity tester on a pc on the same lan as my mobile client everything is green and it says its ready for use.
    using my android galaxy s5 client on wifi on the same lan i get a screen with waiting to sign in spinning and an error at the top "we cant connect to the server check your network connection and server address, and try again."
    i have uploaded the full client log files
    here: client log file
    some errors that stand out from this log file are:
    1. ERROR HttpEngine: Certificate check fails: java.security.cert.CertPathValidatorException: Trust anchor for certification path not found.
    2. <h2>401 - Unauthorized: Access is denied due to invalid credentials.</h2>
      <h3>You do not have permission to view this directory or page using the credentials that you supplied.</h3>
    i am using the correct creds, same creds i used on the analyzer tool.
    in the analyzer tool i did have to fill in the username field because my sip domain is different then my users UPN. which from what ive read its required to use the username field.
    i also filled in the username field in the mobile app with domain\username
    3. ERROR LYNC: ERROR TRANSPORT /Volumes/ServerHD2/buildagent/workspace/200604/tps/ucmp/platform/networkapis/privateandroid/CHttpConnection.cpp/295:CHttpConnection exception: java.lang.NullPointerException
    Jan 14, 2015 8:40:49 AM INFO LYNC: INFO TRANSPORT /Volumes/ServerHD2/buildagent/workspace/200604/tps/ucmp/ucmp/transport/requestprocessor/private/CHttpRequestProcessor.cpp/173:Received response of request(UcwaAutoDiscoveryRequest) with status = 0x22020001
    Jan 14, 2015 8:40:49 AM INFO LYNC: INFO TRANSPORT /Volumes/ServerHD2/buildagent/workspace/200604/tps/ucmp/ucmp/transport/requestprocessor/private/CHttpRequestProcessor.cpp/201:Request UcwaAutoDiscoveryRequest resulted in E_ConnectionError (E2-2-1). The retry
    counter is: 0
    4. Jan 14, 2015 8:40:50 AM ERROR LYNC: ERROR TRANSPORT /Volumes/ServerHD2/buildagent/workspace/200604/tps/ucmp/ucmp/transport/authenticationresolver/private/CAuthenticationResolver.cpp/431:Failing the original request as we weren't able to get the token
    this is the same type of error i was getting in the lync connectivity analyzer until i filled in the username field. but its filled in, in my client.
    again you can see the full log file is `HERE
    thank you in advance for any help. im trying to get internal working before i try external.

    Eric,
    I am trying to configure a reverseproxy on my netscaler which is in a 2 arm mode(dmz/internal) but I keep getting an error when configuring the monitor.
    i used this guide to configure it
    http://www.lynced.com.au/2014/04/configure-citrix-netscaler-vpx-as.html
    but continue to get this error in the netscaler monitor "Failure - TCP connection successful, but application timed out"
    so the virtual server is never up, thinking about just changing it to tcp as a monitor so it stays up and i can at lesat get the vip up.
    Also your link to the diagram shows it going to the reverse  proxy but the one im using has it going directly to the front end servers.
    http://www.lync-solutions.com/Documents/Lync_2013_protocol_poster_v6_7.pdf
    I'm guessing Microsoft's is the correct one but wonder why the config differential?
    I see that your diagram says "mobility url", what is the mobility url? i though that was the lyncdiscoverinternal.internal.com
    current setup is
    2 fe servers on internal
    1 edge server on dmz
    1 almost done reverse proxy netscaler load balancer.
    also this ms link i used to configure dns entries, along with the pdf linked above.
    http://technet.microsoft.com/en-us/library/jj945644.aspx
    i currently have these external dns entries and they all point to the edge server on the dmz.
    dialin .external.com
    lync .external.com
    lyncweb .external.com
    lyncdiscover.external.com
    meet .external.com
    sip .external.com
    webconf .external.com
    av .external.com
    _autodiscover._tcp.external.com.
    the internal dns links point to 1 of the front end servers
    1. lyncdiscoverinternal.internal.com
    2. lyncdiscover.internal.com
    3. _sipinternaltls._tcp.internal.com
    4. _sipinternal._tcp.internal.com
    5. sipinternal.internal.com
    6. sip.internal.com
    thanks again for your help.

  • Does Siri work internationally, or is it specific to the country I bought my iPad in?

    I live in the UAE but travel extensively around the world. Before I buy an Ipad I would like to know if Siri will work regardless of the country I am in or will it only give me specific answers to the country i bought the unit in?

    Siri itself works in all countries, but not all features are available everywhere. See:
    http://www.apple.com/ios/feature-availability/
    Regards.

  • JDBC Adapter:- How does it work??

    Dear Friends,
    I would like to know the nuts and bolts of JDBC adapter.
    1.)How does it work internally?Internally what does sap use?
    2.)In my scenario i just need to access a sap table so Can i write my Java JDBC program to access it.?
    3.)Is there any other way to sent data from Idocs to map to a external database with out using XI.?
    thx,
    jeevan

    Hi Jeevan,
    As far as the JDBC adapter goes, internally it uses, obviously JDBC (Java DataBase Connectivity). Thus all the calls from this adapter are internally SQL Queries (Either Select, Insert, Update, Delete, Execute Stored Procedure) that are sent using Java JDBC API.
    In Sender Configuration, it needs a Select and an Update query to be configured into it. It polls the External Database at specific intervals (Polling Interval in the Channel Configuration),i.e., it connects to the Database via a JDBC Connection and runs the select query. The data from the query is sent to XI as an XML Document. The update query is used to update the DB such that the same data is not picked again in the next poll. This is generally done through a status field. The select query's Where clause should pick records with one status and the update should change all those statuses so that the select does not pick them again. Click [Here|http://help.sap.com/saphelp_nw70/helpdata/EN/22/b4d13b633f7748b4d34f3191529946/frameset.htm|SAP Help on JDBC Sender Adapter] for more details, including the format of the XML file sent.
    In receiver configuration, the channels creates SQL statements from the XML Document it receives. This can be either Select, Insert, Update, Delete or Stored Procedure Call Statements. This requires you to give the receiver channel an XML Document in a pre-defined Schema. Click [Here|http://help.sap.com/saphelp_nw70/helpdata/EN/22/b4d13b633f7748b4d34f3191529946/frameset.htm|SAP Help on JDBC Receiver Adapter] for more details including correct XML Schemas. Note that the kind of SQL Statement generated (Select, Update, etc) is dependent on the schema provided.
    Hope this was helpful!!!
    Thanks,
    Guru

  • I have recently upgraded my iMac Intel G5 iSight to OS 10.6.8 and now the internal mic does not work with skype or facebook. I can here static when playing back clips. Do I need to update firmware or reload old sys parts

    I have recently upgraded my iMac Intel G5 iSight (iMac5,1) to OS 10.6.8 and now the internal mic does not work with skype or facebook. I can here static when playing back clips. Do I need to update firmware or reload old system parts. I have zapped PRAM. The blue indicator in system audio panel will appear for a second as I slide the bar for internal mic but then it disappears. Is there a fix?

    The sound seems very faint but can here static on playback.

  • Apple USB keyboard does not work with one internal usb port

    Hi everyone,
    hope someone can help me to solve my problem. I have a MPB13 retina late 2013 since something like 3 months. I have additional screen (dell), usb wired keyboard (apple) and BT magic mouse.
    Since a few days, my usb keyboard does not work well. It only want to work properly when plugged to the rights side usb port internal port and not anymore on the left one. It also work on a usb external concentrator. Before, I had no problem, it worked perfectly. There was no problem such as cofee on it...
    After searching the web on such problem, I tries a few things such as:
    I tried the keyboard on another computer (windows): works fine
    I tried usb stick and external DVD reading on the left internal usb ports: works fine
    I switch the MPB off and turn it back on: the usb keyboard still does not work on the left usb port
    I tried the SMC and PRAM reset : nothing
    Any idea ??
    Thanks
    Guillaume

    I'm facing the same problem, found any solutions ?

  • After upgrading to Lion internal mic does not work with Facetime

    After upgrading to Lion internal mic does not work with Facetime.  The mic is picking up sound as noted in System Prefs.  This was working just fine before the updgrade.  Facetime works OK on my iPod. 

    you have in french a tutorial to recreate your partition here
    Rebuild partition with Recovery HD lion after upgrade to 10.7.2
    i tested, it's work !
    For your wifi problem:
    Try to change your setup of wifi, look this table given by apple:
    I changed my wifi setup wep to wpa and it's work !

  • Recently installed Windows 7 on Pavilion dv6748us - internal microphone does not work

    Hi,
    sojo972 wrote:
    I have been searching the web extensively, without success, to find how to resolve this issue.
    I recently installed Windows 7, 32 bit, on my wife's HP Pavilion dv6748us laptop. Now her internal microphone does not work.
    Have gotten some "roadside" advice to use a Windows Vista driver; Have no idea what the driver is or how to get it.
    Have found some information about uninstalling realtek audio driver and reinstalling an older version; Have no idea on this one either.
    Would really appreciate a definitive answer with a positive result.
    Thanks for all help.
    The drivers for the laptop are located here. select Vista and Driver-audio. The Vista driver should work.  You can uninstall the driver from within the Device manager. Start --> type devmgmt.msc and the device manager will open. Locate the HD audio device and right-click it and update the driver.
    After that is done go to Control Panel and Sound and the recording tab up top.  Check to see if the microphone is grayed out. (not grayed out means driver is properly installed). The microphone should also have a green checkmark next to it.  It is now a matter of selecting the microphone then selecting Properties to enable the microphone and then  test and adjust the input level. Look at the tabs (listen,levels and advanced).
    Had you considered trying Windows update or the Realtec website as a drivers source?
    regards,
    erico
    regards,
    erico
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

    Hi:
    Looking at your system information you could have one of two possible audio cards:
    Conexant HD audio or the RealTek HD Audio
    The fact that you couldn't install the RealTek HD audio driver indicates to me that you don't have a RealTek audio card. Check your device manager and look at your sound card and check to make sure which audio card you have.
    Here is the Vista 32 bit driver for the Conexant audio card:
    http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=32...
    Here is the Vista 32 bit driver for the Realtek audio card:
    http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=32...
    If you in fact have the Realtek audio card, I would download and install the latest, greatest HD driver directly from the RealTek site:
    Accept the agreement, download and install the first one on the list. Maybe it has been updated to fix the issue you are experiencing.
    http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=24&PFid=24&Level=4&Conn=3&DownT...
    Paul

  • BPM problems on PI (XI 7.0) - internal error - Does BPM work in PI for you?

    Hi guys!
    This is the 2nd time I get into the troubles with BPM on PI. On XI 3.0 I had never problems. But on PI when I use BPM I get following error:
    <?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
    <!--  Empfängergruppierung
      -->
    <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
      <SAP:Category>XIAdapter</SAP:Category>
      <SAP:Code area="BPE_ADAPTER">SYSTEM_FAILURE_INTERNAL</SAP:Code>
      <SAP:P1 />
      <SAP:P2 />
      <SAP:P3 />
      <SAP:P4 />
      <SAP:AdditionalText />
      <SAP:ApplicationFaultMessage namespace="" />
      <SAP:Stack>Es ist ein interner Fehler aufgetreten</SAP:Stack>
      <SAP:Retry>M</SAP:Retry>
      </SAP:Error>
    SAP:Stack tag means in english: An internal error has occured.
    My scenario is:
    Idoc sent from R/3
    Mapping to Integration Process (BPM) inbound interface format
    Message receiver in Int Proc (start of BPM)
    sync call to web service (inside Int Proc)
    web service response sent out from BPM (end of BPM)
    mapping of ws response to target structure (idoc)
    Idoc sent to r/3
    I don't know, what could be wrong. In SXI_CACHE I have return code 0 for this Integration Process, so it should be ok.
    Any ideas? Does BPM work in your PI environment?
    Thanx a lot foro help!
    Olian.

    hi,
    >>>>Any ideas? Does BPM work in your PI environment?
    of course it does
    it might mean that your installation was not done properly (or XI configuration during installation) but it has nothing to do with BPM
    Regards,
    michal
    <a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a>

  • Internal microphone on Compaq NX6310 does not work and I can't locate it on my list of devices.

    Internal microphone on Compaq NX6310  does not work and I can't locate it on my list of devices. What is the problem and how can I correct it? Thanks, Brian

    I seriously doubt that Apple will accept your iPad for service/exchange since it sounds like it's a real basket case.  If they
    Do accept it, the cost would be 99USD, but if it is a 64Gb model it will cost 199USD.  The best thing for you to do is to take it into the nearest Apple store to see if they will accept it for repair/exchange.  I can tell you that they definitely will not give you an iPhone in exchange.

  • What exactly does the Work Offline option do in a shared review hosted on an internal server?

    Hi,
    What exactly does the Work Offline option do in a shared review hosted on an internal server?
    I *think* it simply disconnects you from the review server. I'm not sure why one would want to do this.
    I'm trying to recommend an offline workflow for reviewers who may not be able to access a shared review hosted on our internal server (for example, while traveling). These reviewers would like to be able to comment on an offline version of the review PDF and then publish their comments when they can again connect to the Internet/internal server.
    It doesn't seem like "Work Offline"  is the right fit for this scenario. Instead, should reviewers save a local copy to their hard drive, comment on it, and then, when reconnected to the Internet, open the local copy, click Reconnect to Server, and then click Publish Comments?

    Thanks, Dave. So for my hypothetical traveling reviewer, it would be reasonable to suggest the following steps for an offline workflow?
    1. Connect to the shared review.
    2. Choose Work Offline from the Server Status menu.
    3. Close and save the review PDF locally.
    4. Comment while traveling.
    5. When back in the office, open the local copy of the review PDF.
    6. Click Reconnect to Server.
    7. Click Publish Comments.

  • How does VFP CDX works internally ?

    Hello all,
    Are there any information how MS VFP CDX file works internally, what type of trees it use. how
    does it function on multi-user environment, memory caching etc...
    I have lots Dbf which I use for my clients, I can managed the operation of Dbf file in .Net; but not the CDX file.
    I'm starting to convert all my projects to .Net but I still want to work with DBF structure the reason
    I'm retaining all my tables. any comments or suggestion about this
    Project is greatly appreciated.
    Cheers.

    Good day sir Olaf,
       Thank's for the quick reply and some good insight ^_^y
    "Do you really want to reinvent the low level file access to DBF and CDX?"
      I don't think that Fox Software want to reinvent dBase when they release
      the first version of FoxBase which is very much a like of dBbase II.
      Not to reinvent actually, but to create my own file storage compatible
      to all of my existing DBF tables; I can now store up to "16 Gigabytes" of data
      on a single table on which a maximum file size of "2 Gigabytes" on most DBF
      file engine out in the wild.
    "If you want to use DBF data (including indexes) make use of the VFPOLEDB Provider,
    that's the easiest way to work with VFP SQL and other commands"
      As much as possible I want my probject free from other 3rd party software, as I'm
      planning to port this project on MONO upon completion.
      I'm comportable using the .NET Language-Integrated Query, making an IEnumerable
      (Cacheable) file base records list will suffice for now.
      MY main idea are : NoSQL, with a built in LINQ-like features that will
      suffice most of the querying using Where/For and While condition with ease
      and without doing a database field mapping when accessing a DBF file.
       NoODBC, No need for OLEDB, ADO.Net, VFPOLEDB, SQL SERVER or any other Database
       Connector to access the DBF file.
    "The only official file structure description of the vfp help file doesn't go deep:"
      Thanks for this link appreciated; most likely CDX is a file base B+Tree; now I'm
      just wondering how VFP balance the tree; or it will be super balanced upon the
      issuance on REINDEX something like compacting the database on MS SQL.
    Thanks ^_^y
     

  • Lightroom : does it work with 2 intern HD's in mirror

    Lightroom : does it work with 2 intern data  HD's in mirror with the name for exemple H:\                 Because Windows see dis 2 intern HD's as 1 volume(1 piece)
    and Lightroom is standard installed on  C:\ Programfiles\Adobe\Adobe Photoshop Lightroom ..
    and the libary is standard placet in on   C:\ Documents and Settings\Jan\My documents\ my pictures(mijn afbeeldingen)\Lightroom\ Lightroom ... Catalog.lrcat
                                                                                                                                                                                                \ Backups LTR...
                                                                                                                                                                                                 \Lightroom .. Catalog Previews.lrdata
    Note: "Jan" is not my real first name

    I assume you mean if you can use an internal hard disk in mirrored RAID setup?
    Yes, you can, but LR will see only one of the RAID disks. Otherwise you would have redundant images in your catalog. If one disk fails, you would update the folder location to the other RAID disk.
    Provided the RAID controller still works....
    I had this desaster once when the RAID controller died together with one disk. It was hell of an effort to get the remaining disk readable, because it insists on its RAID controller.
    So do not mistake this setup as your only backup solution.
    Cornelia

  • Does iMessage work for international use?

    I'm in the United States and my friend from Canada has iMessage and we were wondering if iMessage will work internationally without any extra fee. Does anyone know?

    .. can't get away with using data allowances. Usage is really negligible.
    Before sending what you think is an iMessage, look out for the following:
    1. Open Messaging or the iphone's app for SMS.
    2. Start new message / new conversation.
    3. In the To: key in your contact name/number.
    4. If your SMS input field says "Text Message" (grayed out), then you will be sending a text message (SMS).
    If the SMS input field says "iMessage", then be confident that the other person has its iMessage enabled and therefore you WILL be sending iMessage over.
    5. Send message. Watch for blue bubble
    Note: Both you and the other person must have iMessage enabled (Settings > Messages > iMessage = ON)

Maybe you are looking for