Does it work, is it safe???

I know this question will of been asked a lot on here BUT...
Is this patch/crack or what ever you want to call it to get Font Row back on the Lion OS SAFE??
Just I don't want to mess things up after getting it all running ok.
ANY help would be great, thanks people

Install Front Row on Lion is what you want.

Similar Messages

Sending email does not work

I upgraded to the most current version to see if the spell checker would not cause a freeze up and now no longer able to send emails , no change to the setup for the account and tried making new account and will not configure the mail server or find it . still possible to receive emails
version 31.1.1 was working for emails both ways , after up grading 31.1.2 does not work , spell checker still cause it to freeze ,
everything would fine with a version 15 , emails and spell checker , version 31.1.1 first had the problem with the spell checker thought upgrading to 31.1.2 might fix it , now even worst off

Hi petevdweg
I can send and receive email using gmail and zimbra mail using Thunderbird 31.1.2 on both Mac and Windows.
In order to provide the best possible comments or advice and to save time, the community will need more troubleshooting details (<b>in particular exact error messages if any, your exact Thunderbird settings for sending and receiving email - screenshots preferred; your OS, Thunderbird version and the other details mentioned below</b>). But, I also wanted to suggest these links as we frequently find that problems relate to these issues:
#Does Thunderbird work in TB Safe mode? https://support.mozilla.org/en-US/kb/safe-mode
# Perhaps your passwords for some reason aren't being recognized? If so try deleting your SMTP password and your incoming (POP or IMAP password) : https://support.mozilla.org/en-US/kb/cannot-send-messages
# If you are on Windows, please double check that your anti-virus and firewall programs are configured for the version of Thunderbird you are using. Some anti-virus programs require a manual configuration to re-allow Thunderbird after each Thunderbird upgrade. If that doesn't help please try *briefly* turning off anti-virus and see if that helps. More info and some anti-virus workarounds are here: https://wiki.mozilla.org/Thunderbird:Testing:Antivirus_Related_Performance_Issues
If the above doesn't help, the community needs more detailed troubleshooting information to help you
Please reply with complete details:
# firewall and anti-virus software versions if any,
# Operating System (Windows XP?)
# ISP, mail service provider,
# the output from Thunderbird when you select Help | Troubleshooting Information
# what add-ons you have installed if any
# exact error message, what you did, what you expected, what happened, etc.

TS1381 My left arrow does not work on my macbook pro(model A1226). I have reset nvram, performed a safe boot, pulled the cache to desktop, replaced .globalpreference.plist, test all other keys with keyboard view (all others work) - HELP!!

My left arrow does not work on my macbook pro(model A1226).
I have reset nvram, performed a safe boot, pulled the cache to desktop, replaced .globalpreference.plist, & tested all other keys with "keyboard viewer" (all other keys work except for the arrow).
In addition, I have gone thru all the recommended checks with universal access and have booted from snow leopard dvd and the left arrow still does not work.
I have tried using the left arrow key in all of applications I use such as: excel, ms word, address book, calendar, iphoto, terminal, & highlighting an icon and using the arrows to move to another selected icon.
Here is the kicker! In addition, I purchased a logitech solar bluetooth keyboard and the arrows work fine with my ipad but do not work when paired with the macbook pro. All other keys work fine on the macbook pro using the bluetooth keyboard.
I believe this says that the problem is not in my macbook pro keyboard. So where can it be?
Can anyone think of any other rabbit holes I can search?
thanks and regards
vats3

I would also like to add that I've reverted the two cd drive and hard drive mods I did and the laptop is back to factory hardware and there is 0 corrosion or mold visible.

Open "SAFE" document: does it works or not?

Hi all guys.
A customer is asking me why, after have downloaded a file ( .doc, for eample) the document is not open automatically.
I've read many issues about this and the setting in General/Open Safe document.... seems to be the only setting I can do.
But it does not work!
Any idea?
Actually, my only opportunity is to switch to Firefox...and this make me sad!
Rob

In my case the Safari Preference, "Open 'Safe" files after downloading" does work. I keep it unchecked as a security precaution and I highly recommend others do as well. You didn't mention if your customer had a copy of Word on their machine. If not, that would certainly explain why the ".doc" file was not automatically opened after downloading.
One possible "workaround" is to simply double-click the downloaded file from within Safari's "Download" window. No need to retrieve it fron the Finder, though that is also an option. Just double-click the files icon.

Norton 360 premier is not compatible and the identity safe does not work with firefox 4 it worked with earlier version. If there is a solution great otherwise I am going back to IE.

All my passwords are Norton identity safe protected. If firefox4 does not work with it I am forced to go back to IE. Previous versions had a patch. I only realized the problem after downloading the new update. I wish I never had.

Symantec need to update their Firefox add-ons so that they are compatible with Firefox 4. They have indicated that for Norton 360 they plan to release an update to Norton 360 to support Firefox 4 in early May - http://us.norton.com/support/kb/web_view.jsp?wv_type=public_web&docurl=20100720113635EN&ln=en_US
I do not know about the time scale for updates for other Norton products. Pending the update by Symantec, if you want to use the Norton add-ons you will need to downgrade to Firefox 3.6.
To downgrade to Firefox 3.6 first uninstall Firefox 4, but do not select the option to "Remove my Firefox personal data". If you select that option it will delete your bookmarks, passwords and other user data.
You can then install the latest version of Firefox 3.6 available from http://www.mozilla.com/en-US/firefox/all-older.html - it will automatically use your current bookmarks, passwords etc.
To avoid possible problems with downgrading, I recommend going to your profile folder and deleting the following files if they exist - extensions.cache, extensions.rdf, extensions.ini, extensions.sqlite and localstore.rdf. Deleting these files will force Firefox to rebuild the list of installed extensions, checking their compatibility, and reset toolbar customizations.
For details of how to find your profile folder see https://support.mozilla.com/kb/Profiles

Switching browser using IE tab plus - the Norton Identity Safe does not work

Using Firefox 4.0.1 and Norton 360 5.1.0.29 - which has recently been "fixed" to work together (by Norton).
When using IE Tab Plus to switch rendering engines (Firefox to IE) the Norton Identity Safe does not work by not pre filling user names and passwords to sites that are registered in the Norton Safe and also for any new sites does not offer the option to add a new site to the Norton safe . . . . . is this a Norton or Firefox or IE Tab issue? And has anyone else had this problem?

Symantec need to update their Firefox add-ons so that they are compatible with Firefox 4. They have indicated that for Norton 360 they plan to release an update to Norton 360 to support Firefox 4 in early May - http://us.norton.com/support/kb/web_view.jsp?wv_type=public_web&docurl=20100720113635EN&ln=en_US
I do not know about the time scale for updates for other Norton products. Pending the update by Symantec, if you want to use the Norton add-ons you will need to downgrade to Firefox 3.6.
To downgrade to Firefox 3.6 first uninstall Firefox 4, but do not select the option to "Remove my Firefox personal data". If you select that option it will delete your bookmarks, passwords and other user data.
You can then install the latest version of Firefox 3.6 available from http://www.mozilla.com/en-US/firefox/all-older.html - it will automatically use your current bookmarks, passwords etc.
To avoid possible problems with downgrading, I recommend going to your profile folder and deleting the following files if they exist - extensions.cache, extensions.rdf, extensions.ini, extensions.sqlite and localstore.rdf. Deleting these files will force Firefox to rebuild the list of installed extensions, checking their compatibility, and reset toolbar customizations.
For details of how to find your profile folder see https://support.mozilla.com/kb/Profiles

My Norton Identity Safe does not work since installing FF4.0.1

After installing FF4.0.1 my Norton Identity Safe does not work. Also, I have been getting a few pop-up windows which my Norton would normally have blocked. Norton is not showing any issues. FF is set to block Pop ups.

Symantec have made an update for their add-ons to work in Firefox 4, but they only listed them as compatible with Firefox 4.0, they need to update them to let them work in Firefox 4.0.1. For details see http://community.norton.com/t5/Norton-Internet-Security-Norton/Norton-product-compatibility-with-Firefox-Updates/m-p/443808

I just updated itunes to 11.1.3 on my laptop and now it won't open. It does not respond to trying "safe mode" either.

I just updated itunes to 11.1.3 on my laptop and now it won't open. It does not respond to trying "safe mode" either. Anyone have an idea as to what to do?

I just uninstalled it and am waiting for it to reinstall. I sincerely hope that I have not lost everything that I worked on so hard. Now that mobile me is gone, I have not been able to go between devices to transfer things. I was merely trying to take a document I had worked on and open it in pages, but it said my version was too old. When I updated, it wouldn't load. Now I cannot do anything. I hope that the reinstall fixes it without losing everything. Please advise!!! Yes, I am in panic mode.

Linking to a website does not work

I am new to captivate and am having a problem. On one of my slides, I have a link to a website. I placed a click box over the text and set the action to Open URL or file and specified the URL to open in a new window.
When I publish the project, the link works when I am in the published PDF file but it does not work when I am in the published SWF or HTM file. Can someone give me some advice on what I may be doing wrong? IF this has been addresssed elsewhere, I am sorry for the duplication. I have searched and could not find anything.
Thanks in advance.

Hi there
"Whitelisting" is a process that is used to identify something as being a "safe" or "trusted" source. I believe what is meant in this context is that you need to add the location to the trusted locations list in the Flash Player as described in the link below:
Click here to view
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

Firefox does not work after update to 3.6.6 (and all later revisions)

(EDIT: I found the exact revision from which the Firefox is not starting, it is 3.6.6 so I changed them throughout this post, previous revision value was 3.6.8)
I am using Windows 7 x64
After Firefox recently updated to 3.6.6 it does not work any more. The application is listed in task manager but it does not do anything. There is no user interface or anything. Only way to interact with it is "End process". Starting in safe mode or starting Profile manager is not possible.
I tried all possible and suggested solutions in mozilla KB, this and other forums but without success (windows safe mode, firefox safe mode, renaming firefox, waiting, checking for firewall or malware/virus issues, deleting profile, uninstall, clean reinstall and every possible combination of those that I could think of). Always the same result, no error message, firefox shown in task manager and that's it.
When I do clean install of all later firefox revisions starting from 3.6.6 the problem remains, including latest Firefox 4 beta6.
I have no issues with any firefox versions on my Vista laptop, so I would guess that something in my windows environment is not suitable for newer versions of firefox.
As I cannot find official older 3.6.x revision of Firefox, I am currently using 3.5.13 and it works flawlessly.
Any help is appreciated, I ran out of ideas.

You can try a direct connection and select No Proxy in the connection settings.
You can find the connection settings in "Tools > Options > Advanced : Network : Connection"
Also do a malware check with a few malware scan programs.<br />
You need to use all programs because each detects different malware.<br />
Make sure that you update each program to get the latest version of the database before doing a scan.
* http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
* http://www.superantispyware.com/ - SuperAntispyware
* http://www.safer-networking.org/en/index.html - Spybot Search & Destroy
* http://www.lavasoft.com/products/ad_aware_free.php - Ad-Aware Free
* http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
See also "Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked and [[Searches are redirected to another site]]

Has anyone been able to contact Adobe to learn why their Flash Player does not work on Mac OS 10.6.8, no matter how many updates you install? This seems like a big error by Adobe.

I have thee Mac computers with Mac OS 10.6.8, one of which is a Mac Pro. No matter how many updates I install from Adobe, their Flash Player does not work on any of these 3 computers. I don't know how to contact Adobe Systems about this problem, but I think it is their responsibility to make sure that their so-called "universal" software works proplerly on a relatively recent operating system like OS 10.6.8 that is still in widespread use. When you install the updates, nothing happens -- not even an error message. What is the point of a universal player that is not universal? It works fine on my MacBook Pro with OS 9 Mavericks, but it does not work at all -- indeed, has never worked -- on my 3 Macs with OS 10.6.8. Has anyone contacted Adobe Systems to find out why the Flash Player does not work with OS 10.6.8 and what they plan to do about it?

Where are you getting Flash from?
Get the appropriate dmg installer here and then run it.
http://www.adobe.com/products/flashplayer/distribution3.html
If it still won't install, do these two things: First uninstall any Flash by going into the second level Hard Drive Library>Internet Plug-ins, and trash the Flash Player.plugin and flashplayer.xpt. Then boot into Safe Boot, Shift at the startup chime (give it much longer than a usual boot) and run the installer while booted in Safe Boot.

My Macbook Pro keeps freezing/crashing after a few seconds of use, but works fine in safe mode.

I've researched this extensively, but I haven't been able to solve my problem yet.
It started completely out of the blue with a kernel panic, where my screen seemed to malfunction and I got the kernel panic message (but I could hardly read it because of distorted graphics). I forced my laptop to shut down, but every time I rebooted and used it again it would completely freeze after a while (the amount of time varied, it has lasted from a few seconds to a couple of hours). What happens essentially is that the cursor and entire OS freezes, and I'm unable to click on anything or use the keyboard. The fans start working full speed and the only thing I can do is force the laptop to shut down.
At first I thought it was a Chrome problem because it only happened after I opened the browser. After uninstalling it, the laptop seemed to work fine for a couple of hours, but then it froze again while I was using Safari. Ever since it has been functioning normally for smaller and smaller time periods before freezing again. I've tried reinstalling Snow Leopard OS from the original disc and then downloading all software updates, but the problem continues. I've also tried doing a hardware test by pressing D as the computer starts up, but for some reason it doesn't work.
The laptop, including Chrome and Safari, works fine in safe mode.
I'm sorry I don't know what specific information to give you about my laptop/OS, but please ask anything you need to know. I'd greatly appreciate any help — I'm panicking because I fly to England tomorrow morning to start university and I really don't want to go without a laptop for 2 weeks while it's getting fixed!

Thanks for your reply! Here are the Etrecheck results.
Hardware Information:
          MacBook Pro (15-inch, Early 2011)
          MacBook Pro - model: MacBookPro8,2
          1 2 GHz Intel Core i7 CPU: 4 cores
          4 GB RAM
Video Information:
          AMD Radeon HD 6490M - VRAM: 256 MB
          Intel HD Graphics 3000 - VRAM: 384 MB
System Software:
          Mac OS X 10.6.8 (10K549) - Uptime: 0 days 0:51:36
Disk Information:
          ST9500325ASG disk0 : (465.76 GB)
                    (null) (disk0s1) <not mounted>: 200 MB
                    Macintosh HD (disk0s2) /: 465.44 GB (339.98 GB free)
          MATSHITADVD-R   UJ-898
USB Information:
          Apple Inc. FaceTime HD Camera (Built-in)
          Apple Inc. BRCM2070 Hub
                    Apple Inc. Bluetooth USB Host Controller
          Apple Inc. Apple Internal Keyboard / Trackpad
          Apple Computer, Inc. IR Receiver
FireWire Information:
Thunderbolt Information:
          Apple, Inc. MacBook Pro
Kernel Extensions:
Problem System Launch Daemons:
          [not loaded] org.samba.winbindd.plist
Problem System Launch Agents:
          [failed] com.apple.Kerberos.renew.plist
Launch Daemons:
          [not loaded] com.adobe.fpsaud.plist
          [not loaded] com.google.keystone.daemon.plist
          [not loaded] com.microsoft.office.licensing.helper.plist
Launch Agents:
          [not loaded] com.adobe.AAM.Updater-1.0.plist
          [not loaded] com.divx.dms.agent.plist
          [not loaded] com.divx.update.agent.plist
          [not loaded] com.google.keystone.agent.plist
          [not loaded] com.hp.devicemonitor.plist
          [not loaded] com.hp.messagecenter.launcher.plist
          [not loaded] com.quark.quarkupdate.agent.plist
          [not loaded] net.culater.SIMBL.Agent.plist
User Launch Agents:
          [not loaded] com.adobe.AAM.Updater-1.0.plist
          [not loaded] com.facebook.videochat.elenicourea.plist
          [not loaded] com.spotify.webhelper.plist
          [not loaded] net.infinite-labs.SIMBLEnablerForSandboxedApps.plist
User Login Items:
          Flux
          GrowlHelperApp
          iTunesHelper
          Flux
          The Lion King Circle of Life.mp3
          Dropbox
3rd Party Preference Panes:
          Flash Player
          Flip4Mac WMV
          Perian
Internet Plug-ins:
          AdobeAAMDetect.plugin
          DirectorShockwave.plugin
          DivX Web Player.plugin
          Flash Player.plugin
          FlashPlayer-10.6.plugin
          Flip4Mac WMV Plugin.plugin
          googletalkbrowserplugin.plugin
          iPhotoPhotocast.plugin
          JavaAppletPlugin.plugin
          npgtpo3dautoplugin.plugin
          o1dbrowserplugin.plugin
          OVSHelper.plugin
          QuickTime Plugin.plugin
          SharePointBrowserPlugin.plugin
          Silverlight.plugin
User Internet Plug-ins:
          Picasa.plugin
Bad Fonts:
          None
Top Processes by CPU:
              44%          Google Chrome
              28%          WindowServer
              10%          EtreCheck
               7%          syslogd
               2%          hidd
               2%          Bluetooth File Exchange
               1%          fontd
               0%          Finder
               0%          SystemUIServer
               0%          JavaApplicationStub
Top Processes by Memory:
          210 MB             Google Chrome
          111 MB             JavaApplicationStub
          57 MB              Finder
          49 MB              Dock
          42 MB              Google Chrome Helper
          41 MB              SystemUIServer
          41 MB              WindowServer
          41 MB              Bluetooth File Exchange
          41 MB              quicklookd
          41 MB              EtreCheck
Virtual Memory Statistics
          382 MB             Free RAM
          1.01 GB            Active RAM
          518 MB             Inactive RAM
          2.10 GB            Wired RAM
          461 MB             Page-ins
          364 KB             Page-outs

IMac works fine in safe mode, extremely slow in normal mode

Hey guys, I'm going nuts!
My mac got stuck on a white screen, I ended up reinstalling Snow Leopard - now when I boot in normal mode everything is extrememly slow - when I mouse over the corner of a window (close minimise etc) is stops and takes about 10 seconds to make the rollover affect (putting the "x" in the red circle). When I move the mouse over anything on the desktop, it stops working for about 10 seconds as well. The mouse moves around the screen fine, and after a lot of painful (and very patient) clicking, I can transfer files around fine - happens just as fast as it would normally, windows open as normal etc.
The most frustrating part is - everything works fine is safe mode! I'm typing this message on the mac now... I was thinking that I could transfer all of my data on to an external drive, but safe mode won't recognise them it took me about 10 minutes to select a folder and copy it to a hard drive in normal mode - I can't drag over a few items because of the mouse problem...
I have updated my software - can't open the app store for some reason (I want to upgrade to Lion as well). No idea what to do...

One of the primary difference between a safe boot and a normal boot is that all third party software is prevented from starting in the safe boot. So it sounds like something you installed on your Mac is causing the problems.
Are you running any kind of AV software?
If you are I would suggest that you start by unsintalling it. There are no virus on the Mac for the AV software to find any way so all it ever does is cause problems.
Allan

OSX Mountain Lion 10.8.4: imessage works fine in safe mode, but not in "normal" mode. Any hints?

My iMessages does not work in "normal" startup, but it works perfectly in safe mode.
Any hints?
I have the same problem on a MacBook Pro 17" and on a MacAir 13" mid 2011.
On my MacMini, iMessage work's fine.
I'm using same apple ID on all 3 devices.
Before update to 10.8.4, i had no problems.
FaceTime also stopped working after update to 10.8.4.
Thanks in Advance,
Lars O.

Please read this whole message before doing anything.
This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac.
These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing.
Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects.
Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then copy it. The headings “Step 1” and so on are not part of the commands.
Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign.
Step 1
Triple-click the line of text below on this page to select it:
kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}' | open -f -a TextEdit
Copy the selected text to the Clipboard by pressing the key combination command-C. Then click anywhere in the Terminal window and paste (command-V). A TextEdit window will open with the output of the command. If the command produced no output, the window will be empty. Post the contents of the TextEdit window (not the Terminal window), if any — the text, please, not a screenshot. You can then close the TextEdit window. The title of the window doesn't matter, and you don't need to post that. No typing is involved in this step.
Step 2
Repeat with this line:
{ sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix)|org\.(amav|apac|cups|isc|ntp|postf|x)/{print $3}'; sudo defaults read com.apple.loginwindow LoginHook; sudo crontab -l; } 2> /dev/null | open -f -a TextEdit
This time you'll be prompted for your login password, which you do have to type. Nothing will be displayed when you type it. Type it carefully and then press return. You may get a one-time warning to be careful. Heed that warning, but don't post it. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
Note: If you don’t have a login password, you’ll need to set one before taking this step. If that’s not possible, skip to the next step.
Step 3
{ launchctl list | sed 1d | awk '!/0x|com\.apple|org\.(x|openbsd)/{print $3}'; crontab -l 2> /dev/null; } | open -f -a TextEdit
Step 4
ls -A /e*/{la,mach}* {,/}L*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts .la* 2> /dev/null | open -f -a TextEdit
Important: If you formerly synchronized with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting.
Step 5
osascript -e 'tell application "System Events" to get name of every login item' | open -f -a TextEdit
Remember, steps 1-5 are all copy-and-paste — no typing, except your password. Also remember to post the output.
You can then quit Terminal.

Teamviewer does not work after 10.7.3

Hello -
I just discovered that Teamviewer in Version 6 and also in Beta 7 does not work anymore. Re-install did not work.
Version 6 : it starts but the application can only be killed
Version 7 : The application does not start anymore. The shown error report is sent to Teamviewer.com but i doubt there will be an answer since I am using that private.
Maybe someone knows or has a hint/comment. Would be very helpful.
Thanks

Dear Harry - thanks a lot for googling that and which I not found :-(
I was trying to open the error log file from there but it was not available. I cannot see in my log files such a correlation and the mentioned program I do not have. I also cannot remember to have installed after the Lion Upgrade other system programs. And before, it was definitly working.
Okay, meanwhile I have tried the different things
- SMC and NV Reset
- booting in Safe Mode <-- here it is also crashing
After reboot in normal mode, the same crashing behavior. I also repaired permission and rebuild the DYLD cache thru ONYX. Everything does not help at all.
The only thing what has changed is the error message, now it looks something the Font and Carbon, before it was something different, the GeForceGLDriver.
Crashed Thread: 3
Exception Type: EXC_BAD_ACCESS (SIGSEGV)
Exception Codes: KERN_INVALID_ADDRESS at 0x0000000029d9068c
VM Regions Near 0x29d9068c:
mapped file 000000000c8bd000-000000000cb86000 [ 2852K] rw-/rwx SM=COW /System/Library/Fonts/Helvetica.dfont
-->
__TEXT 0000000064b00000-0000000064b07000 [ 28K] r-x/rwx SM=COW /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/Print.framewo rk/Versions/A/Print

Does it work, is it safe???

Similar Messages

Maybe you are looking for