Does it work with the Octava toslink 4x1 HDMI switcher?

Anyone using atv with the Octava 4x1 HDMI switcher? I'm reading reports of non-functioning HDMI switches. That would suck.

Kevin Key wrote:
I just installed the 3.0.2 firmware upgrade and I still can't get my Apple TV to transmit HDMI video to my TV via my Sony STR-DH500 receiver. All other components - Blu-Ray player, Scientific Atlanta cable TV converter, and Acer laptop work just fine with the HDMI switch in the tuner.
AppleTv is notoriously fickle with some switches/AV receivers over HDMI.
Question is whether this is due to an over rigorous HDMI implementation by Apple but it would seem odd that other manufacturers just had lax implementations.
Apple TV works when connected directly to the TV, but I really don't want to have to keep swapping HDMI cables.
No, I agree very frustrating. HDMI great when it works!
Have you considered connecting via component to the TV/receiver and analogue or optical audio ?
Is this lack of compatibility due to heavy-handed anti-piracy measures on Apple's part?
Doubt it, it happens with unprotected material presumably too.
Apple TV is the first Apple product I've ever owned, and will likely be the last. There's one good thing about Apple TV: the interface is awesome.
Yes, makes up for lots of other things.
But, I should be able to connect it via an HDMI switch, shouldn't I?
Yes, it's not necessarily AppleTV at fault but when other devices all work it certainly suggests it's the problem.
And Apple won't give me any support over the phone unless I pay $49?!
I wouldn't bother I doubt you'd get anywhere other than being advise to try a different switch or plug into your TV.
Is anyone else having this issue?
Yes, with certain device pairings several posts comment about this.
While some non mainstream brand switches might not be implemented well you'd expect Sony to be ok.
Is there anything else I should try?
Apart from component no.
Is there a hack that can fix this problem?
No.

Similar Messages

Fast dial (visual bookmarks) does not work with the new 5.0 upgrade. How do I correct this issue

fast dial (visual bookmarks) does not work with the new 5.0 upgrade. How do I correct this issue Asked this question yesterday. I desperately need info, will I ever be able to use fast dial again?

I tried it and it WORKED....I even tried the other version BEFORE this one and it didn't work so I tried yours and it worked like a charm so THANKS brother....

I would like to create the a swatch, add it to the library and import to the swatch panel. The help pages available relate to earlier versions of Muse, which does not work with the 2014.2 release version that I have. I have created a library folder, imp

I would like to create the a swatch, add it to the library and import to the swatch panel. The help pages available relate to earlier versions of Muse, which does not work with the 2014.2 release version that I have. I have created a library folder, imported the colour swatch as just 4 colours as a mulib file. I drag the four colours on to the muse page in design view but that is as far as I get. Can anyone help? Thanks

I don't know since I don't share anything. You'll have to peruse the help files and check the permissions and ACLs on the Shared folder. According to the permissions on the Shared folder everyone can R&W. If you want those to be inherited by everything dropped into the folder, add an ACL for
everyone allow read, write
Details in the manpage for chmod. The actual steps are left as an exercise.

The program vectorworks 2008 (not 2009) does not work with the new operating system Mavericks, which is a disaster because it forces us to change the program, and is very expensive. Apple should fix this problem

The program vectorworks 2008 (not 2009) does not work with the new operating system Mavericks, which is a disaster because it forces us to change the program, and is very expensive. Apple should fix this problem

Why should Apple fix the problem? Maybe you should consider NOT upgrading if an expensive piece of (obsolete) software you're running won't work with it...

HT1695 Wi-Fi to your iPhone does not work with the knowledge that I have worked Restart for the same purpose network does not work What is the solution please help as soon as

Wi-Fi to your iPhone does not work with the knowledge that I have worked Restart for the same purpose network does not work What is the solution please help as soon as

Okay, the Wi-Fi doesn't work. Turn it on.
Beyond that, we cannot offer any other assistance as you've failed to provide useful details of the problem.
When responding, post in your native language as your English makes very little sense.

Brightness control does not work with the bluetooth keyboard connected on my iPad2. Please someone could help me ?

Brightness control does not work with the bluetooth keyboard connected on my iPad2. Please someone could help me ?

Julien-
I have the Apple MC184LL/A Bluetooth Wireless Keyboard. The brigtness control works with mine, as do most of the other functions.
Try cycling the keyboard off and on. Hold the power button until the green LED goes out. Then press it one more time to turn it back on.
You might try resetting the iPad's network. Go to Settings-General-Reset-Reset Network Settings. Then you may need to reconnect your WiFi and Bluetooth.
If that doesn't help, try resetting/rebooting the iPad. Hold both the Home and Sleep buttons for several seconds until the Apple logo appears. Ignore the "Slide to power off" arrow. The iPad will restart in a couple of minutes. Resetting this way will not hurt anything, and sometimes clears up mysterious problems.
Fred

Does iPhone work with the Apple Hi-Fi speakers

Thinking of buy the Apple Hi-Fi speakers. Does it work with the iPhone?

Neil is correct, it does work, a previous version of the firmware had some problems and could trigger the warning message you refer to, suggesting airplane mode. In fact, airplane mode is a good idea because the GSM interference will be really loud on the HiFi.
The HiFi has been discontinued, have you been able to find one?
Message was edited by: deggie

Does this work with the macbook?

does this work with the new macbook?
Apple Mini DVI to Video Adapter
http://store.apple.com/Apple/WebObjects/ukstore.woa/6644042/wo/Dg4BvxbpYG2k3zYlb 4c1UxPXhbI/8.0.23.1.0.8.25.7.11.0.3
it dosent state the macbook though

thanks just got 1

DB Adaptor import table option does not work with the AS400 DB

1. The DB Adaptor import table option does not work with the IBM i-series(AS/400) tables(Both in ESB and BPEL).
2. Also I was not able to import tables from multiple databases into
the same BPEL project.

Both of these issues work in preview version. My earlier posting was based on beta version testing.

GoPod - Does it work with the latest Ipod firmware?

I have a 5th Gen 60gb iPod and have used goPod in the past to remove the volume cap. But ever since updating my iPod with the latest firmware the volume limit seems to be very quiet compared to what it used to be. Is this because goPod 1.4 doesn't work with the latest firmwire?
Has anyone else had this problem or is it just me going deaf?
Cheers

I disagree with that rudolfraith.
When I plug my iPod in, launch goPod and then press uncap, it does say that it is now uncapped, but the volume limit is no difference at all. I even tested this by hooking my Ipod up to my PC and recording it capped and uncapped, the levels were exactly the same.
So I feel that goPod v1.4 doesn't work with the latest firmware.

Does itunes work with the new intel core duo processor?

i want to go buy a new laptop and the one I have in mind has the new intel core duo T2300 or the T2400 processor. Can i still download itunes onto this computer? Does it meet the requirments becuase the download page says you need a pentium or BETTER? The new macs are putting them in their computers, but will the windows and intel duo be able to support the itunes application?

are you asking if it is compatible meaning will it
install/run or are you asking if flash is
optimized to take advantage of this particular setup?
--> **Adobe Certified Expert**
--> www.mudbubble.com
--> www.keyframer.com
BAT06 wrote:
> I am currently looking at up grading to a new pc but
have heard that the new
> Intel Core Duo Processor isn't compatible with Flash or
Studio 8?
>
> Has anyone got a PC running with an Intel Core Duo
Processor, and if so does
> it work with Flash and or Studio 8?
>

Does iWeb work with the new Apple System?

I am thinking of buying the new iMacs but wondering if iWeb will continue to work with the new Apple system.
Does it?

Thank you everyone! You all have been a big help and I have copied the links suggested.
It's been a while since I last used the community. I later remembered to type in key words and found others with solutions too. So, extra big thank you for responding so quickly and Happy Holidays!

My ipod touch 3g with ios 5.0.1 does not work with the player's car

ios 5.0.1 update from my ipod touch 3g does not work with various audio players Car pionerr with previous updates had not had problems like I can solve this problem???
thanks

I have tried everything and nothing that happened when you upgrade to ios 5.0.1, I want to know if anyone else has had this problem

My mission control key does not work with the new Mac update

The key on the keyboard doesnt work, neither does the button on my dock. Any help?
P.S. is anyone else having as much trouble as I am with the new update?

The pre-2006 Mac models this forum covers cannot run a Mac OS high enough to have Mission Control. If you can identify your Mac to us we can get you moved to a more active forum.

Firefox does not work with the USPS self ship web site. Will not allow printing of postage labels.

Some months ago, user "junkbondman" asked this question somewhat poorly, and partly as a result got a non-responsive boilerplate answer by someone who did not read the question's key (if cryptic) point:
> Select a service type. THIS IS WHERE THE WEB SITE FAILS TO WORK PROPERLY
That's too bad, because 16 other users identified "HAVE SAME PROBLEM" - as had, no doubt, a large majority of the 677 viewers of the question. However, maybe to get a better answer we need to start with a better definition of the problem.
The way that the USPS site <cns.usps.com> works to print a label is that addresses (return and forward) are defined, the package weight and value are specified, and then a shipping mode is selected before paying and printing the label. The shipping mode is selected in a section titled "Select a service type", via an embedded table using a vertical scroll-bar that Firefox cannot handle. [Firefox is not alone in that. For example, Safari under iOS cannot scroll the embedded table, but USPS provides a mobile app which mitigates that problem by presenting the table differently.]
Now, it should be stipulated that the table is the worst element in a bad page that does not begin to pass W3 validation [71 errors, 19 warnings - looks like government work]. However, other browsers (like Google Chrome) handle that table with apparent ease. The question is whether Firefox should be able to do so - and, if so, how? As of Fx 33.0, this still does not work.
NOTES:
(1) Unfortunately, to examine this problem requires setting up a USPS account in order to see the shipping page. Setting up the account is easy, but it is a small extra burden to examining the problem.
(2) The problem has been reported to USPS, but has elicited no sign of intelligent life.

''I get the "pointer" mouse cursor when mousing over the blue bar, and I can click on it and scroll the contents as with any other scroll bar, but the bar doesn't move up and down in sync with the content being scrolled: it just stays put. If I do not slide straight down, the blue bar may twitch a pixel left or right.''
Great description! - sorry if you implied that earlier and I misunderstood, but I think that description adds crucial details:
* must hover over the ''blue'' part of the bar (representing the visible part of the table) and
* get the "selector" cursor (the pointing finger), then
* hold that click while scrolling (inside or outside of the table doesn't matter, as long as that click is held) to the needed table row, then
* release the click, and the table stays in place to allow a selection.
Most pages with an embedded scrollable input form (like the box I'm typing in on this page) do not change to the selector cursor when hovering over ''any'' part of the scroll bar, either ''blue'' (representing the visible part of the input form) or ''white'' (the invisible part of the input form). And it is common to click in the ''white'' part of the bar as a way of saying "show what is not visible". You can't do that with these USPS input forms, which behave differently.
Now, even with this method, that remains a very unintuitive (because the scroll bar does not reflect the position, and because the actual ''selections'' never get the "selector" cursor) and awkward way to work, so there is no visual feedback on either part of the operation.
And, I must try to understand why some browsers treat this differently. For example with Chrome (like Firefox), the cursor changes to "selector" in the blue part of the scroll bar, but not in the white part, but with Chrome (unlike Firefox):
- a ''click'' in the white ("invisible") part of the scroll bar or
- a ''drag'' on the blue ("visible") part of the scroll bar
causes movement in the required direction - altogether more intuitive behavior.
Bottom line: At least there is a way to make this work with Firefox, but it is awkward, to say the least. It will require a lot more thought to think about:
* how and why some browsers handle these non-standard input forms with such intuitive behavior (that is, behavior that is familiar in more standard input forms),
* whether the fact that Firefox is less accommodating in that regard is a reportable bug, or whether Firefox should not have to worry about sites (like usps.com) that can't be bothered to comply with standards.
What do you think about those questions?

Does it work with the Octava toslink 4x1 HDMI switcher?

Similar Messages

Maybe you are looking for