Does iWeb do any auto backup during editing?

I spent considerable time adding content to my iWeb file and got crashed down by the SF Word Processing bug.
Any knowledge as to whether recovery is any hope would be appreciated.
Robert

FineThanks wrote:
...and got crashed down by the SF Word Processing bug.
Robert ~ This Apple doc may help in averting such crashes in the future:
_iWeb & iWork: Applications may suddenly quit after updating to Mac OS X v10.6.2_
FineThanks wrote:
Does iWeb do any auto backup during editing?
I don't think so — iWeb has a manual approach via its File menu > Save option. iWeb stores everything in a Domain file, normally located here:
...So previous copies of that file may be available via Time Machine or other backup strategy such as SuperDuper.

Similar Messages

Does Lightroom create any log file during exports?

While exporting a photo book to PDF and Blurb the process fails. Export to JPEG works, 1 file per page.
Is any log created so that one can see which page caused the problem?
Thank you.

Thanks for looking and acknowledging the question Geoff.
A log for troubleshooting would be very helpful.
A log showing photo ID's on page numbers would be a fast referance when someone wants to go from a printed book to the photo file.
Thanks.
-- Fred

Upgraded to Mavericks, Enter Time Machine and cannot see any previous backup at all

MBP, upgrade from 10.6.8 to Mavericks.
After "Enter Time Machine", the time line on the right side of the screen does not show any previous backup at all.
In Finder, I can see the backup folder and the inside contents.
In Time Machine Preference, I did select the disk for backup again.
Any idea ? Thank you.

Thank you for your reply and the links.
I did this:
1) I have two ext. USB drives for the MBP time machine backup, did not occur to me to try the other one which is the very first disk, let's call it disk 1, I used for backup, the other one I started using after a year or so.
2) reboot with the disk 1 connected
3) do a "Backup Now", and I forgot the exact dialogs and what they say.
4) something like, "choose a disk for the backup", I chose disk 1
5) it knows I had two disk for backup and ask me if I want to use two disk for backup, click yes
6) the time machine pref. says something like initial backup (after new system installed?)
7) after it done, I can see the previous time machine back up and the time line goes back to where it was before.
8) connect the disk 2 and "Backup Now", it just went to backup right away, after it's done, I can see the prev. backups and the time line too.
Thanks again for your help.

Help: Just finished shooting a wedding and Aperture crashes constantly during editing. All pic's in RAW and even after making sure I have the latest Aperture update, I have had to rebuild my library twice and "repair" does not seem to fix the issue. Help?

Help: Just finished shooting a wedding and Aperture crashes constantly during editing. All pic's in RAW and even after making sure I have the latest Aperture update, I have had to rebuild my library twice and "repair" does not seem to fix the issue. Help?

Well!
If you have ThunderBolt, I would go with such for an External Working Drive, spinning platter or SSD depending on your budget
This does not have to be huge just big enough to house your most current Jobs
Once the Current Job is put to rest I would move it to a larger multi bay hard drive unit, USB or FireWire nothing fancy, no RAID, set up as one single Disk
This would only be accessed when something is needed from a past Job so the connection does not have to be speedy
The Drobo would be relegated to Vaults and backups
You can set up a Vault on the Drobo to back up the External Working Library and then Reconnect it when you have moved the Library over to the other Enclosure
This has worked for me pretty smoothly for a long while, but I have found over the years that one can not assume all people work in the same manner! :-)

I am using both PSE 13 and Lightroom 5. When I use Lightroom as an external editor and save the photo, it shows up in PSE13 as an edited file but does not look any different. Why doesn't it appear edited?

I am using both PSE 13 and Lightroom 5. When I use Lightroom as an external editor and save the photo, it shows up in PSE13 as an edited file but does not look any different. Why doesn't it appear edited?

People who have Photoshop, but don't have Lightroom, need ACR so that they can use Raw files. Without ACR they could do nothing with those (they may also like having ACR so that they can work on other kinds of image using the same kinds of adjustments and techniques, as are used with Raw files).
People who have Lightroom, can get access to Raw files regardless whether ACR is present or not. They can use Lightroom on other kinds of image also, using the same methods. LR can pass images directly into Photoshop without passing via ACR (or else does so transparently, which amounts to substantially the same thing).
ACR does not, strictly speaking, even need to be installed for this external editing to happen. In fact, not even PS needs to be - since a different image editor can be used instead, while still retaining the Adobe Raw conversion etc.
Lightroom "subcontracts out" specialised external tasks, in this workflow, but is still your "main contractor": the image is otherwise located, viewed, managed, adjusted/presented and output entirely using LR.
So IMO we can divide image processing into:
operations that involve pixels and layers and layer masks and adjustment layers etc (of the kind done inside Photoshop)
operations that involve parametric edits (of the kind done in ACR where you are not using a Lightroom based workflow; otherwise, done inside Lightroom)
When PS is called in, that's because those tasks are impossible or unsuitable to do in Lightroom. But those tasks can't be done in ACR either - by definition, since LR and ACR have exactly the same image processing "feature set".
Lightroom is irrelevant to the Bridge + ACR + PS workflow. This workflow requires both your PS and your ACR to be current enough, to support your Raw format etc.
ACR and Bridge are irrelevant to the LR + (image editor) workflow. It is in this case, only LR which needs to be current enough to support your Raw format etc.
RP

Time Machine will not let me restore from backups after June, 2013. I can see the files on the external hard drive but Time Machine skips all of them and goes back to June, 2013. Does anyone have any idea what the problem is?

Time Machine will not let me restore from backups after June, 2013. I can see the files on the external hard drive but Time Machine skips all of them and goes back to June, 2013. Does anyone have any idea what the problem is?

rtilghman wrote:
telling me to buy a new router is NOT a solution.
And why not? Apple is selling these things like BigMacs. They can't make enough of them. You've been suffering since May because you refuse to get a decent router.
Can you imagine if a company that makes a refrigerator told me that I needed to upgrade my electrical system to rectify a problem with their device? What kind of response IS that?!?!
What if the problem with their device is that it requires a new-fangled "grounded" outlet and your circa 1890 house doesn't have grounded outlets. Would you refuse to purchase a $ 25 adapter on principle?

IPhoto does not see any changes after editing a photo in Camera Raw

Hello everyone ,
I have some small problem with my iPhoto. I have set up Camer Raw in iPhoto as External Editor, so when I click on edit in IPhoto,
automatically opens my JPG in Camera Raw. After editing in Camera Raw I'm clicking on ,,Save image" then destination is ,,Save in same location" When I go back to iPhoto to the same photo, iPhoto does not show any changes I have made in Camera Raw.
What could it be or should I set something in iPhoto or in Camera Raw?
Is there a chance in order to deal with this?
I will be grateful for any assistance and
I'm waiting for advice
Dawid

Any time a RAW file is edited in any 3rd party editor from within iPhoto it MUST be saved to the Desktop and imported as a new file. There's no other way to do it. So the photos you've edited and saved are somewhere in the iPhoto Library folder system but cannot be recognized and used by iPhoto.
The following is geared for Photoshop and Photoshop Elements but might have some info relevant for you:
Using Photoshop CS3 or Photoshop Elements 9 as Your Editor of Choice in iPhoto.
1 - select Photoshop as your editor of choice in iPhoto's Advanced Preference Section's under the "Edit photo:" menu.
Click to view full size
2 - double click on the thumbnail in iPhoto to open it in Photoshop. When you're finished editing click on the Save button. If you immediately get the JPEG Options window make your selection (Baseline standard seems to be the most compatible jpeg format) and click on the OK button. Your done.
3 - however, if you get the navigation window
Click to view full size
that indicates that PS wants to save it as a PS formatted file. You'll need to either select JPEG from the menu and save (top image) or click on the desktop in the Navigation window (bottom image) and save it to the desktop for importing as a new photo.
This method will let iPhoto know that the photo has been editied and will update the thumbnail file to reflect the edit..
NOTE: With Photoshop Elements 9 the Saving File preferences should be configured as shown:
Click to view full size
s I also suggest the Maximize PSD File Compatabilty be set to Always. In PSE’s General preference pane set the Color Picker to Apple as shown:
Click to view full size
NOTE: If you want to use both iPhoto's editing mode and PS/PSE without having to go back and forth to the Preference pane, once you've selected PS as your editor of choice, reset the Preferences back to "Open in iPhoto". That will let you either edit in iPhoto using the Edit button or Control-clicking on the thumbnail and selecting "Edit in iPhoto" or in PS/PSE by Control-clicking on the thumbnail and selecting "Edit in External Editor" in the Contextual menu.
Click to view full size
This way you get the best of both worlds.
OT

When I turn on my iPad the grey 'brightness slider' is in the centre of the screen and I can't get rid of it. I've tried switching on / off 'auto-brightness' in 'settings' but it won't go away. What am I doing wrong? Any advice gratefully received.

When I turn on my iPad the grey 'brightness slider' is in the centre of the screen and I can't get rid of it. I've tried switching on / off 'auto-brightness' in 'settings' but it won't go away. What am I doing wrong? Any advice gratefully received.

That folder with the question mark icon means that the MacBook can't find the boot directory. That can either mean it can't find the hard drive or the Operating System data on the hard drive is somehow corrupted.
Put your install DVD into the optical drive (CD/DVD drive) and reboot. As soon as you hear the boot chime, hold down the "c" key on your keyboard (or the Option key until the Install Disk shows up). That will force your MacBook to boot from the install DVD in the optical drive.
When it does start up, you'll see a panel asking you to choose your language. Choose your language and press the Return key on your keyboard once. It will then present you with an Installation window. Completely ignore this window and click on Utilities in the top menu and scroll down to Disk Utility and click it. When it comes up is your Hard Drive in the list on the left?
If it is then click on the Mac OS partition of your hard drive in the left hand list. Then select the First Aid Tab and run Repair Disk. The Repair Disk button won't be available until you've clicked on the Mac OS partition on your hard drive. If that repairs any problems run it again until the green OK appears and then run Repair Permissions.
If your hard drive isn’t recognized in Disk Utility then your hard drive is probably dead.

When I connect an external hard drive to macbook pro it is very slow to appear on the desktop and Finder window, sometimes 20 mins or more, even with auto backup switched off . any clues?

when I connect an external hard drive to macbook pro it is very slow to appear on the desktop and Finder window, sometimes 20 mins or more, even with auto backup switched off . any clues?

Hi robfromkinglake west,
Try and isolate the issue. Check if it's only with this drive.
Check the drive with Disk Utility
Using Disk Utility to verify or repair disks
http://support.apple.com/kb/ht1782
I've never seen a drive take 20 minutes to mount.
Nubz

The backup location does specified does not contain any backup. Specify another backup location.

We have our server set to backup to an internal HDD (E:), and then copy all the files in E: to different locations for storage (a NAS for instance). I scheduled a copy to a USB drive, but I can't get the recovery wizard to see the backup it now contains.
I choose "A backup stored in another location" and then "Remote shared folder", as the USB (G:) does not show up in Local drives. I now need to enter a UNC (it won't accept the "G:\" path), so I shared the USB drive and
enter "\\SERVER\G\2014-09-23", which is the path to the parent of the WindowsImageBackup folder on the USB drive. At this point I get the above error "The backup location does specified does not contain any backup"
All the files look to have copied OK, and have the same Date Modified as on the server: as far as I can tell it's identical, and yet it won't mount. Help?

Hi,
I would like to confirm the exact backup process:
When creating the backup, are you choosing "local drives" and then "G:", or Remote shared folder and then \\server\g\folder?
If it is a network path, could you restore it with \\server\g\folder instead?
If you have any feedback on our support, please send to [email protected]

HT1515 Does airport express have auto on/off schedule feature? Or any other ways to turn it on/off automatically.

Does airport express have auto on/off schedule feature? Or any other ways to turn it on/off automatically.

The Timed Access feature of the AirPort Express will allow you set the specific times that each wireless device will be allowed to connect to the wireless network each day.
However, this feature cannot be used to "turn on", or "turn off" the AirPort Express device.

Does apple have any explanations for why iCloud will not support iWeb & is there any viable solutions. iWeb is critical to my small business & we have all been trained via joint ventue on iWeb. Now it just goes away. Why?

Does apple have any explanations for why iCloud will not support iWeb & is there any viable solutions. iWeb is critical to my small business & we have all been trained via joint ventue on iWeb. Now it just goes away. Why?

turbodave2 wrote:
I appreciate your repsonse, but the irony is that Apple is still scheduling "One-to-One" & Joint Venture training on iWeb knowing that it all will end next June. ..
Just to add this : iWeb -- the app itself -- is still supported,updated only months ago and as part of the ilife '11 DVDs still widely spread even though it is not sold on the AppStore it is official part of iLife. It runs in Lion and there is zero issues with the app. So a training makes sense, doesn't it ?.
They would only to exclude the "publish to me.com" part to be up to date for courses and trainings :-≠

Restore from time machine does not list all my backups. I know they exist but there dates are not present on the restore list. Any help appreciated.

Restore from time machine does not list all my backups. I know they exist but their dates are not present on the restore list. Any help appreciated. If I must use one of these older dates to restore, how do I then get the more current data off time machine?

Ok, so am i correct in saying that the steps to fix are as follows.
That's one option, but not what I meant by restoring in the time-travel view. The latter is what you get when you enter Time Machine.
is the fresh install not going to be able to "see" the time machine backups that I have at the moment.
It should, but sometimes people report that it fails. I'm not sure why that happens.

Can I migrate from mavericks to mavericks server. Have tried using a hard drive but the but the sever does not find the migration backup when it's searches. Any help out there?

Can I migrate from mavericks to mavericks server. Have tried using a hard drive but the but the sever does not find the migration backup when it's searches. Any help out there?

Is the HDD in the 2009 15" MBP dead? (The original source of your data) If not, you might want ot take it out and put it in an enclosure.
You might try spotlight on know files to see if that gives you any clues where your data is located.
You might down load from the Internet OmniDiskSweeper (free) and open it. It should show you all of the files you have on your MBP and enable to locate them.
Ciao.

For one Urgent Change during performing the Approval(chnging the status to 'To be Tested') system does not recognize any changes using the CTS WBS BOM in the development system. The transaction is therefore incorrect or the status was reset by the system.

For one Urgent Change while performing the one of the Approval before changing the status to 'To Be Tested'
We are getting below error.
The system does not recognize any changes using the CTS WBS BOM in the development system. The transaction is therefore incorrect or the status was reset by the system.
COuld anyone please help us to know, How it can be resolved?
We also have this below error.
System Response
If the PPF action is a condition check, the condition is initially considered as not met, and leads to another warning, an error message, or status reset, depending on the configuration.
If the PPF action is the execution of a task in the task list, and the exception is critical, there is another error message in the document.
Procedure
The condition cannot be met until the cause is removed. Analyze all messages in the transaction application log.
Procedure for System Administration
Analyze any other messages in the task list application log, and the entries for the object /TMWFLOW/CMSCV
Additional Information:
System cancel RFC destination SM_UK4CLNT005_TRUSTED, Call TR_READ_COMM:
No authorization to log on as a trusted system (Tr usted RC=0).
/TMWFLOW/TU_GET_REQUEST_REMOTE:E:/TMWFLOW/TRACK_N:107
For above error Table /TMWFLOW/REP_DATA_FLOWwas refreshed as well but still the same error.

If you are in Test System, you can use function module AA_AFABER_DELETE to totally delete the depreciation area (tcode SE37, specify chart of depreciation and depreciation area), After that recreate your depreciation area and run AFBN. But before you do that, have you created a retirement transaction type that limits the posting on your new depreciation area? If not create one.
Hope this helps.
Thanks!
Jhero

Does iWeb do any auto backup during editing?

Similar Messages

Maybe you are looking for