Does JCE support the 163 bit ECC (Eliptic Curve) algo for the encryption

Hi,
I would like to know if SUN JCE package supports 163 bit ECC (Eliptycal Curve) encryption scheme for encryption/decryption using cipher class?
Thanks,
Shirish

AFAIK, no, it is not supported. Could be supported by one of the other encryption packages though.
- Daniel

Similar Messages

Why is there no Boot Camp support for the 64-bit version of Windows 7 on the 64-bit iMac that I'm using?

The early 2008 24" iMac 8,1 has a 2.8 ghz E8235 Intel Core 2 Duo processor with a data width of 64-bits.
I am straining badly to understand why Apple is only providing drivers for the 32-bit version of Windows 7 for the 64-bit hardware that I want to install it on.

The 64 bit drivers are there, but there have been some installation
issues depending on Windows OS and Apple hardware. You may
want to post on the Bootcamp forum to get more direct response to
your issue.
FWIW, at one point, I forget when, I found I needed to manually
open the 64 bit versions of the drivers to install them that were created
on the bootcamp driver install disk (image). As I recall the was a
64 bit .msi "global" installer but even at that there was an individual
one that needed to be manually installed.
Its been a while since I last did this since I have been doing everything
in Windows virtual machines with Parallels.

"The files are on a volume that does not support Trash. Would you like to permanently delete the item?"

Suddenly I've started getting the error "The files are on a volume that does not support Trash. Would you like to permanently delete the item?.
iMAC OSX 10.9.4.
LR 5.6,
Camara Raw 8.6
Any idea?
Please Help Me...
Thanks in advance
Jose

This is how I solved it, thanks to combined information posted on forums:
1. Got a new external hard drive formatted for Mac (I was using read-only Windows from my PC)
2. Created a folder in new external drive >imported to LR->send to trash- empty trash
3. The above was still not working until I noticed one day magically the missing picture icon started to show up in LR
4. I went to the "set as rejected"pictures> locate missing pic (and nearby ones)
5. Selected the pics -photo>remove> delete from disk
Done!!!
Thanks to the hours spent on searching different threads, and to the relentless users because LR never provided any kind of support or formal response to solve this by just letting users to getting lost in frustration .

What encryption algorithims does JCE support?

What encryption algorithims does JCE support?

you can find out what your jce supports with something like
--- clip ---
public class listCrypto {
public static void main(String[] argv) throws Exception {
     if ( 0 == argv.length ) {
     System.err.println("usage: java listCrypto Signature");
     return;
     System.out.println(java.security.Security.getAlgorithms(argv[0]));
--- end clip ---
-hugh

HT1926 I am trying to install iTunes on a windows 7/64 OS. The 32 bit version said that I need the 64bit version. the 64 bit version says that it is not a valid 32 bit installation. How can I fix this??

I am trying to install iTunes on a windows 7/64 OS. the 32 bit version said that I needed the 64 bit version. The 64 bit version syas that it is not a valid Win32 application. How do I get around this problem??

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2

I downloaded Itunes 10.6 but my computer said itunes is not a 32 bit version. It said to download the 64 bit version. but it was the 64 bit version. What can I do to fix this.

I downloaded the update itunes 10.6 and My computer won't install it. It sais that the program is a 32 bit version that I needed to download the 64 bit version. But it was the 64 bit version. I am thinking about getting rid of my ipod and itunes. I wish I hadn't upgraded. Now I can't even use itunes. It loads up but it won't go onto itunes store.

You already have Shockwave Flash 10.2 r152 installed for Firefox on the PC you used to post here, see your ''More system details...'' next to your posting.
There are no 64-bit builds of Firefox made, only 32-bit currently. There are some 3rd party builds floating around out there, but Mozilla doesn't allow them to be named Firefox - they would be called Namoroka for 3.6 versions. Mozilla does have a Minefield 64-bit build for 4.0-pre versions, but it won't be available as Firefox until probably Firefox 5 is released.
If your situation is with a different PC than what you used to post here: 
1.Download the Flash setup file from here: 
[http://fpdownload.adobe.com/get/flashplayer/current/install_flash_player.exe Adobe Flash - Plugin version]. 
Save it to your Desktop. 
2. Close Firefox using File > Exit 
then check the Task Manager > Processes tab to make sure '''firefox.exe''' is closed, 
{XP: Ctrl+Alt+Del, Vista: Shift+Ctrl+ESC = Processes tab}
3. Then run the Flash setup file from your Desktop.
* On Vista and Windows 7 you may need to run the plugin installer as Administrator by starting the installer via the right-click context menu if you do not get an UAC prompt to ask for permission to continue (i.e nothing seems to happen). 
See this: 
[http://vistasupport.mvps.org/run_as_administrator.htm]

Client getting an IP lease on the 64-bit LiteTouch boot image, but not the 32-bit version.

MDT 2012 U1. No problem with PXE booting so WDS is not the issue.
The NIC in question is the Intel I217-LM, which resides on both the new Dell Optiplex 9020 and the Latitude E7440. I downloaded the Dell drivers and then the Intel drivers and imported them into the WindowsPE drivers folder in the workbench. Updated
the boot images to make sure the new drivers were injected. Both yielded the same result. I can do everything I need to do when booting to the 64-bit LiteTouchPE_x64.wim boot image, but not the 32-bit version. When booting to the 32-bit
version, I get no IP configuration info at all.
When looking at the drivers in MDT, I see only one difference: the supported OS versions. The 64-bit driver supports 6.1, 6.1.1, and 6.2. The 32-bit driver supports only 6.1.1 and 6.2. Not sure if that's the issue.
Tried using drvload within 32-bit WinPE to manually inject the NIC driver. Still no luck. Ipconfig yields no configuration at all.
If I can't get these machines to boot to the 32-bit boot images, I can't deploy 32-bit images, unless there's a way of which I'm unaware.
EDIT: A little extra background. My WindowsPE folder has two subfolders called x86 and x64. Obviously, 32-bit drivers go into the x86 folder and 64-bit drivers go into the x64 folder. Then in the properties of the deployment share a
selection profile is selected which points to the architecture-specific folders.

Specifically what do you see when you are in WinPE, press the F8 button, and run ipconfig.
1. ipconfig shows no network adapters (see:
http://myitforum.com/cs2/blogs/rpedersen/clip_image002_53DA17D4.jpg ). This means you still have not loaded the correct device drivers, check the c:\windows\system32\wpeinit.log file.
2. ipconfig shows an "autoconfiguration IPv4 Address" with a netmastk of 255.255.0.0. This means that the client did not get an IP address from the DHCP server. Double check the connection between the client and the DHCP server.
3. ipconfig shows a correct address. There is no problem. :^)
Keith Garner - keithga.wordpress.com
I get the first result. Absolutely no network adapters, which I assumed indicated no appropriate device driver.
This is the result of the wpeinit.log from the machine booting to the 32-bit boot image:
Info WPEINIT is processing the unattend file [X:\unattend.xml]
Info Spent 1747ms initializing removable media before unattend search
Info ==== Initializing Display Settings ====
Info Setting display resolution 1024x768x32@60: 0x00000000
Info STATUS: SUCCESS (0x00000000)
Info ==== Initializing Computer Name ====
Info Generating a random computer name
Info No computer name specified, generating a random name.
Info Renaming computer to MININT-TFRU2BT.
Info Acquired profiling mutex
Info Service winmgmt disable: 0x00000000
Info Service winmgmt stop: 0x00000000
Info Service winmgmt enable: 0x00000000
Info Released profiling mutex
Info STATUS: SUCCESS (0x00000000)
Info ==== Initializing Virtual Memory Paging File ====
Info No WinPE page file setting specified
Info STATUS: SUCCESS (0x00000001)
Info ==== Initializing Optional Components ====
Info WinPE optional component 'Microsoft-WinPE-HTA' is present
Info WinPE optional component 'Microsoft-WinPE-MDAC' is present
Info WinPE optional component 'Microsoft-WinPE-WMI' is present
Info WinPE optional component 'Microsoft-WinPE-WSH' is present
Info STATUS: SUCCESS (0x00000000)
Info ==== Initializing Network Access and Applying Configuration ====
Info No EnableNetwork unattend setting was specified; the default action for this context is to enable networking support.
Info Acquired profiling mutex
Info Install MS_MSCLIENT: 0x0004a020
Info Install MS_NETBIOS: 0x0004a020
Info Install MS_SMB: 0x0004a020
Info Install MS_TCPIP6: 0x0004a020
Info Install MS_TCPIP: 0x0004a020
Info Service dhcp start: 0x00000000
Info Service lmhosts start: 0x00000000
Info Service ikeext start: 0x00000000
Info Service mpssvc start: 0x00000000
Info Released profiling mutex
Info Spent 749ms installing network components
Info Spent 1669ms installing network drivers
Error QueryAdapterStatus: no adapters found.
Info Spent 0ms confirming network initialization; status 0x80004005
Info WaitForNetworkToInitialize failed; ignoring error
Info STATUS: SUCCESS (0x003d0001)
Info ==== Applying Firewall Settings ====
Info STATUS: SUCCESS (0x00000001)
Info ==== Executing Synchronous User-Provided Commands ====
Info Parsing RunSynchronousCommand: 1 entries
Info Command 0: 0x00000000
Info Successfully executed command 'wscript.exe X:\Deploy\Scripts\LiteTouch.wsf' (exit code 0x00000000)
Info STATUS: SUCCESS (0x00000000)
Info ==== Executing Asynchronous User-Provided Commands ====
Info STATUS: SUCCESS (0x00000001)
Info ==== Applying Shutdown Settings ====
Info No shutdown setting was specified
Info STATUS: SUCCESS (0x00000001)
At first I thought the first bolded section might be relevant, but when I booted to the x64 boot image, which works fine, I get the same message in its wpeinit.log file. The only difference between the two log files is that the x64 boot image actually
shows successful installation of a driver where the second bolded section is.

HT201209 Why if I have money in my apple account, having redeemed a voucher, does my iPad still try to charge my bank account for the music I am trying to purchase?

Why if I have money in my apple account, having redeemed a voucher, does my iPad still try to charge my bank account for the music I am trying to purchase?

Hi backpacker1952,
Thanks for visiting Apple Support Communities.
If you already have an iTunes Gift balance on your account, you can browse and buy music like you would if you were paying with a credit card. You may find the information in this article helpful:
How to browse and buy content from the iTunes Store
http://support.apple.com/kb/ht1879
This article explains how to view your current balance in iTunes:
iTunes Store: iTunes Gift balances
http://support.apple.com/kb/ht5035
You use the Redeem link when you want to redeem an iTunes Gift (like an app someone purchased for you) or add an additional iTunes Gift Card to your account. See this article for more information:
Redeeming iTunes Gift Cards and content codes
http://support.apple.com/kb/HT1574
All the best,
Jeremy

Can I run the 64 bit version of Mountain Lion and the 32 bit version of windows 7 using parallels on the same computer

I purchased a Macbook Pro and it has the 64 bit version of Mountain Lion, I also downloaded Parallels desktop 7, and want to download Windows 7. I need to know if I can use the 32 bit version of wodnws 7 and the 64 bit version of Mountain Lion at the same time on the same computer.

here's the 32 bit installer, 2014 release of Photoshop CC: Separate 32-bit/64-bit installation
Return, cancel, or exchange an Adobe order

Upgraded my macbook pro to mountain lion from snow leopard does this mean i can upgrade my imac as well for the same price? And will it mess it up?

upgraded my macbook pro to mountain lion from snow leopard does this mean i can upgrade my imac as well for the same price? And will it mess it up?

You can upgrade the iMac for no extra charge - sign into the App Store there, download and install 10.8.
I recommend that you make a backup (Time Machine is probably the easiest method) before you install, and make sure that you are not using any applications that are incomptible with 10.8 (eg Office 2004) - other than that, it should go smoothly.
Matt

HT1695 Wi-Fi to your iPhone does not work with the knowledge that I have worked Restart for the same purpose network does not work What is the solution please help as soon as

Wi-Fi to your iPhone does not work with the knowledge that I have worked Restart for the same purpose network does not work What is the solution please help as soon as

Okay, the Wi-Fi doesn't work. Turn it on.
Beyond that, we cannot offer any other assistance as you've failed to provide useful details of the problem.
When responding, post in your native language as your English makes very little sense.

I am using system 10.8.2 and have an issue with the screen saver not filling the screen. the desktop does, but not the screen saver. I find adjustments for the desktop, but not the saver. Would appreciate any suggestions.

I am using system 10.8.2 and have an issue with the screen saver not filling the screen. the desktop does, but not the screen saver. I find adjustments for the desktop, but not the saver. Would appreciate any suggestions.

I have a group of my images that rotate, and yes it happens oneach. I do believethat I have at one time had the images cover the entire screen, however I cannor remember how I made that happen, just like the desktop. I am sure it is old'ites setting in!

Just got an iMac. I am trying to use Migration Assistant. The Mac side seems to be doing it's job, but my PC just keeps "Waiting for the Mac to connect." For over an hour.

Just got an iMac. I am trying to use Migration Assistant. The Mac side seems to be doing it's job, but my PC just keeps "Waiting for the Mac to connect." For over an hour.

Probably a PC issue, you can try calling AppleCare, you are covered for 90 days from the date of purchase and can find the phone number in the owners manual. Also please look over:
http://drtyhnds.blogspot.com/2011/08/how-to-use-migration-assistant-from-pc.html
and
http://pondini.org/OSX/SetupLion.html
Thomas,
It would also be extremely helpful to those trying to help you if you complted your Profile so we at least know what iMac and version of OS X is installed. Click Your Stuff in the upper right then click Profile and complete the necessary fields including what part of the planet you're located.

Does anyone recommend a good graphic utility to prepare files for the web?

Does anyone recommend a good graphic utility to prepare files for the web?

GraphicConverter as noted by Don, or Photoshop Elements are the favourites. Both will allow comprehensive editing, and save for web facilities including reducing the .jpg quality to shrink file size without making the picture smaller.
There is a free application calld Gimp (open source) but I don't know how good it is or whether it's updated for Lion.

We are a two iPhone family, both on the same service provider. My wires iPhone is unable to connect to the home network where as mine is! In the settings her phone has no details for the IP address etc where as mine does! I cannot even enter the details.

We are a two iPhone family, both on the same service provider. My wires iPhone is unable to connect to the home network where as mine is! In the settings her phone has no details for the IP address etc where as mine does! I cannot even enter the details manually.
I have done resets on off and nothing? HELP!

What is that and how. I have 3 airports all configured identically and connected to one router via ethernet!
A power cycle is powering down for ~ 1 minute and powering back up.

Does JCE support the 163 bit ECC (Eliptic Curve) algo for the encryption

Similar Messages

Maybe you are looking for