Does Jiniator Support 3 canvas display at the same time..

Dear Experts,,
I am facing the new problem regarding Canvas..
i Created 3 window. theni created 3 canvases (1 content + 2 stacked) and 2 buttons
In Main window i displyed a content canvas and 1 button.. while pressing the button it's going to 2nd window having the 1st stacked canvas and 2nd button. There is no problem at all in this stage..
When i press the 2nd button the 3rd window is displaying but 2nd wondow is closed..
I looking for an output as
3rd window overlayed on 2nd window
2nd window overlayed on main widow..
i'm not able to Keep 3 windows at the same time...

You should have one content-canvas for each window, not only stacked one's. About your problem... check the window-properties "Close on exit" (should be no) and maybe Window-style and Window-mode.

Similar Messages

Does 5870 support ACD/VGA/HDMI at the same time?

I have a 5870 video card in my 2010 Mac Pro. One mini displayport (mDP) is connected to a 27" ACD. Currently I have the second mDP connected through a mDP-to-VGA adapter to a 17" VGA monitor. Everything works fine.
I decided to free up the second mDP and reconnected the VGA through a VGA-to-DVI (I) adapter.
http://www.monoprice.com/products/product.asp?cid=104&cp_id=10419&cs_id=1041903&pid=2396&seq=1&format=2
Again everything still works fine.
Now that the second mDP was free I tried to hook it to my Sony 32XBR6 to it with a a 15' HDMI cable connected to a mDP-to-HDMI DVI-I adapter.
http://www.frys.com/product/6311581
As soon as I connected the TV it displayed my desktop. Great, except for the fact that the VGA disconnected.
What I found is that I cannot seem to use the second mDP for HDMI and the DVI for VGA _at the same time_. I can use the main 27" ACD and the VGA (with the HDMI disconnected) or the main 27" ACD and the HDMI (with the VGA connected), just not all concurrently as a three-monitor configuration.
The physical connection of the HDMI disables the VGA but not the other way around. Detect displays or rebooting has no effect. I thought the 5870 is capable of driving three monitors albeit one of those monitors is through a HDMI connection. And I would think a 17" VGA cannot require that much "power" from the card couldn't handle it.
Now I suppose the problem could be the specific adapters I used. But considering they work independently I'm not inclined to blame them.
So does anybody have any idea what may be going wrong? Or is this just a limitation of the 5870 in a VGA/ADC/HDMI configuration?

HDMI is basically single-link DVI plus digital audio in one cable. You can find simple DVI to HDMI adapters and cables. They contain no electronics; they just convert between connectors. They do not provide audio since there is no audio in DVI.
DVI (and HDMI) use one data line and one clock line per link. DVI can be single or dual link, but HDMI is only single link. Mini DisplayPort has two data lines available for video. Clock lines aren't used. A passive adapter tells the Mini DisplayPort to send data on one line and clock on the other. There are not enough lines for this to work with dual-link DVI, so dual-link adapters include active circuitry to separate the clock and data from one line. VGA adapters also need active circuitry.
The Apple tech note says that for three displays, no passive adapters can be used.
There are some active single-link Mini DisplayPort to DVI adapters available
<http://support.amd.com/us/eyefinity/Pages/eyefinity-dongles.aspx>
such as
<http://accellcables.com/products/DisplayPort/DP/mdpdvi_slactive.htm>
(You could add a DVI to HDMI adapter or cable to make it HDMI, but it wouldn't have audio.)
but the only active Mini DisplayPort to HDMI adapter I have found is this
<http://www.alibaba.com/product-gs/337561577/miniactive_display_port_tohdmi.html>
If you could get one (not 500) it should solve your problem.
My suggestion to get HDMI from the card's DVI port won't get audio (I didn't see that requirement in your original post) but you could combine video from the card's DVI port (or from an active Mini DisplayPort to DVI adapter) with audio from the Mac Pro's optical audio output port to HDMI with
<http://www.apogeeinc.net/products/item.aspx?item=2745>

How do i set up a second display for my iMac desktop? I want to use both displays at the same time.

how do i set up a second display for my iMac desktop? I want to use both displays at the same time. My iMac is the 24" Late 2006 model. I recall that there is a cord for plugging in a second monitor, but I want to make sure that i can use both monitors side-by-side at the same time. thank you.

If the Display supports DVI, then you will need a > Mini-DVI to DVI Adapter and a DVI cable.
If the Display only supports VGA, then you wiil need a > Mini DVI to VGA Adapter and a VGA cable.
Noting that the (digital) DVI is far better than the (analog) VGA connection.
Also see > Using Dual Displays on Mac OS X: The Experience

How can i connect to a LAN and external display at the same time using the mini-displayport?

Hi all,
At work i'm connected to the Lan via an adapter and the mini displayport. I want to use my external display at the same time, which use the same mini displayport. Are there any splitters available to use both at the same time? Are there any other alternatives?
Thanks,
Dennis

There are USB to ethernet dongles:
http://store.apple.com/us/product/MC704ZM/A/apple-usb-ethernet-adapter?afid=p219 %7CGOUS&cid=AOS-US-KWG-PLA

If i have my mac mini and my mac air connected to my thunderbolt display at the same time how do I switch between each of them without unplugging one of them?

If i have my mac mini and my mac air connected to my thunderbolt display at the same time how do I switch between each of them without unplugging one of them? (By the way im mirroring my macbook air to my thunderbolt display not dual screening it)

That's not what home sharing is for or how it works.
You want the remote app.

Can an Airport extend a wireless network and support a USB printer at the same time?

Can an Airport extend a wireless network and support a USB printer at the same time?

Yes, if the AirPort Express is extending the wireless signal produced by another Apple router. The Express cannot wirelessly extend a network produced by a non-Apple router.
In addition to extending the network and connecting a printer, AirPlay can also be enabled on the AirPort Express, with all services operating simultaneously.
Please note that only the print function will work if you connect an All-in-One type device to the USB port on the Express. Advanced features like copy, scan, mainentance, etc are not supported when an All-in-One device is connected to the USB port on an AirPort router.

Is Cleartype able to support both RGB and BGR sub pixel panel displays at the same time?

Hi,
I am using 2 27' LED displays on my PC. One has RGB sub pixel, the other has BGR sub pixel.
I have problem to tune the font using Cleartype. I have tried to tune all displays a few times and always get the following result.
If I use the RGB one as the primary display, the font on the RGB display looks ok but the font on the BGR display looks weird after tuning using cleartype.
If I use the BGR display as the primary, the font on the BGR display looks ok but the font on the RGB display looks weird after tuning using cleartype.
Basicly, the after tuning with Cleartype, the font on the Primary display looks good but on the other looks weird.
I have also tested with single display setup. i.e. connect only the RGB sub pixel display or the
BGR sub pixel display.
ClearType tuning works well for single display setup no matter which display I have connected.
But once I connect the 2nd display and tune using Cleartype, the font on the Primary display looks good but on the other looks weird. (The same as above)
To be more specific, the RGB display is Philips 278C4 (connect using HDMI), the BGR display is Dell P2714H (connect using DisplayPort. I have also tried DVI. DisplayPort or DVI give same result).
My system is Win 8.1 Pro x64 JA-JP with all latest patches installed, and my graphic card is nVidia GTX 760, with the latest driver installed.
I suspect this is due to one display has RGB sub pixel panel, and the other has BGR sub pixel panel, which means
Windows ClearType need to take care both RGB and BGR for at the same time. I am not sure if this is fully supported by Windows 8.1 ClearType.
Is there any solution or workaround to make the font on both displays looks nice?
Thanks.

Hi,
Windows includes several technologies to render text on the screen. These include Windows GDI, Direct Write and Windows Presentation Foundation.
Windows GDI is limited to using one set of ClearType settings per system
while the other two support different settings per display.
It depends. Most LCD screens have a RGB striping order. A very small number have a striping order of BGR.
For more question, refer to this link:
ClearType FAQ
http://www.microsoft.com/typography/ClearTypeFAQ.mspx
Kate Li
TechNet Community Support

Can InterConnect support D3L and XML at the same time?

Hi,
In file Adapter.ini, ota.type can only be one of D3L and XML. Does it mean InterConnector can only support either D3L or XML parsing at one time?
If I have different type of incoming files, I need to install at least two interconnectors to work, right?
Thanks,
Jie

ASM diskgroup redundancy and SAN redundancy are not the same and work completely different. You cannot use ASM extern and high redundancy at the same time.
A SAN does not know anything about Oracle database files and redundancy is usually accomplished by RAID. ASM is not RAID and does not duplicate complete disks. ASM data redundancy is based on disk failure groups and file extents. ASM knows about Oracle database files and automatically adjusts the stripping of data, which a SAN cannot. ASM also has the advantage that the storage size can be dynamically adjusted while the storage is online, without having to rebuild your storage devices. Rebuilding or extending a RAID based SAN solution usually means to reinitialize the storage.
Beware of SAN snapshot and replication features as they may not provide complete backup or redundancy if you loose the complete storage.

Does af:commandButton submit multiple requests at the same time?

Hi experts,
I have a question about af:commandButton behavior.
I have two commandButtons in a page. They are button1 and button2.
Button1 takes a few seconds to complete its request process.
So when I click button1, I can click button2 although button1 request is still being processed.
I checked how ADF faces handled this situation with servlet filter.
And I saw that button2 request was always submitted after button1 request was completed.
Due to this behavior, I would assume that commandButton is designed not to submit multiple requests at the same time and guarantees click order.
However I couldn't found any documents specifying this feature of commandButton.
If anyone knows it, could you share?
I know ADF Faces has busyStateListener to prevent user inputs during request round trip.
But I'd like to make it sure that I don't need to use busyStateListener if I just want to keep processing order.
Regards,
Atsushi

Hi,
Does anyone know the document specifying the behavior of af:commandButton in case I click two buttons in a page almost simultaneously?
Any help will be much appreciated.
Thanks in advance,
Atsushi

Multiple Rollover Slidelets displaying at the same time.

I have slides with multiple rollover slidelets. Each slidelet has its own audio file added and the "Stop Slide Audio" is checked.
The Rollover Action is set to On Click = "No Action" On Rollover = "No Action". Stick Slidelet is unchecked.
All works as expected. Until you start randomly clicking on the rollover hotspots. Eventually, if you rapidly click like a test monkey from hotspot to hotspot, you can get the slidelet to appear and it will not go away (clicking the close X does nothing as well). If you roll over other hotspots you will have both slidelets visible and playing audio at the same time. The audio of the "stuck" slidelet continues to play even if you go to the next slide.
Here is a recording of an example (no audio) but you'll see what I'm talking about. http://envolvemedia.adobeconnect.com/rolloverissue/
Has anyone experienced this? or have a workaround. I submitted it to Adobe as well.

This is very strange, difficult to guess the cause... never had such an issue. Normally when the object to which the audio is attached disappears the audio stops. So in your case going to a next slide should stop the audio of the previous slide. Same with object audio.
Do you have the different audio clips (one per slide) in the Library? Could you try to delete the audio on the slide and drag it again from the Library to see if you have the same result? And what happens when you attach the audio clip to an object on the slide (you can create a totally transparent rectangle with no stroke that will not be visible to attach the audio).
Lilybiri

Can Java3D (canvas3D) be displayed at the same time on 2 users?

For example, both Ann and Bob are doing the same project on 3D Object.
Can Ann's change to the Canvas3D be saw by Bob dynamically?

Alternatives to iPhoto's slideshow include:
iMovie, on every Mac sold, as is iDVD.
Others, in order of price:
PhotoPresenter $29
PhotoToMovie $49.95
PulpMotion $129
FotoMagico $29 (Home version) ($149 Pro version, which includes PhotoPresenter)
Final Cut Express $199
It's difficult to compare these apps. They have differences in capability - some are driven off templates. some aren't. Some have a wider variety of transitions. Others will have excellent audio controls. It's worth checking them out to see what meets your needs.
However, there is no doubt that Final Cut Express is the most capable app of them all. You get what you pay for.
Regards
TD

Does TestStand support two sub-sequences running at same time

Hi everyone:
There are two sub-sequences whose pre-conditions is same, that is, they may run at same time. Just liking two threads, if a time trigger occurs, two thread will run.
thanks a lot!

MotionBoy,
sure you can. Just configure your calling steps from the subsequence to "New thread".
hope this helps,
Norbert B.
CEO: What exactly is stopping us from doing this?
Expert: Geometry
Marketing Manager: Just ignore it.

Does Oracle support multiple pdk-forms on the same page??

We have a portal page that contains two portlets (“summary” and “review comments”) and each in turn contains a pdk-form. When a form (say “review Comments” portlet) is submitted via post, in the resultant page, the second portlet (“summary”) gets the post parameters from the first portlet as hidden fields. Here is a snippet of the resultant HTML source that shows the second form’s automatically generated hidden fields:
==============================================================================
<form name="summaryFormBean" method="post" action="http://host/portal/page">
<INPUT TYPE="hidden" name="_pageid" value="584,1564971" />
<INPUT TYPE="hidden" name="_dad" value="portal" />
<INPUT TYPE="hidden" name="_schema" value="PORTAL" />
<INPUT TYPE="hidden" name="facilityId" value="1232187" />
<!—The parameters from the review comments portlet -->
<INPUT TYPE="hidden" name="_piref584_1564976_584_1564971_1564971.1415711_REVIEWCOMMENTS_49519881org.apache.struts.taglib.html.TOKEN" value="2c6b4e323df1281c93602ecc9d855819" />
<INPUT TYPE="hidden" name="_piref584_1564976_584_1564971_1564971.strutsAction" value="reviewComments.do" />
<INPUT TYPE="hidden" name="_piref584_1564976_584_1564971_1564971.reviewFacilityComments" value="this is a test" />
<INPUT TYPE="hidden" name="_piref584_1564974_584_1564971_1564971.strutsAction" value="summary.do" />
Due to the presence of the “strutsAction” hidden parameter of the previously submitted “review comments”, when the form in the second portlet (“summary”) is submitted, the “review facility comments” are resubmitted erroneously.
Is this a known issue with oracle portlets? Any thoughts/comments will be appreciated.

Hi Omar,
At least for me it does not help much since it looks like they are not talking about relating a parent table with one or more child tables. For me as a beginner with this product, I also wanted to know how to do that. It would be nice if the wizard allowed more then one child table to be related to the parent. When I have time I will look further into how the wizard created the relations and other bits. Also that thread was talking about forms. I noticed that the wizard created two report regions. Since I am an Oracle Forms developer, HTML DB terminology is quite different so I need to kind of re-learn what they are talking about.
Did you try to make a Master/Detail form with the wizard yet? If you choose to go that route, please let me know how you make out.
Thanks.
Emad

AppleScript - How do I make multiple dialogs display at the same time?

Is it possible to make more than one dialog be displayed at one time with AppleScript? Thanks in advance.

You can see what is available in the Standard Additions dictionary. There are a (very) few things you can fake, but AppleScript dialogs are designed for simple feedback.

What is the best way to use two external displays at the same time?

One of my displays has HDMI, DVI, and VGA inputs. The other has VGA and DVI inputs.
MBP, early 2011
Mac OS X 10.6.7
2.4 GHz Intel Core i5

Kappy is dead on correct about Bridge Mode as a requirement for the Time Capsule.
Do you know how to check to see if the Time Capsule is configured this way?
Next question.....you really should not try to have two wireless networks....one Arris and another Time Capsule.....unless it is absolutely necessary. Two wireless routers in close proximity can create wireless interference effects that can cause problems with either...or both...networks.
Best to turn off the wireless on one router to keep the chances of wireless interference between routers minimized.
Are both the Arris and Time Capsule providing wireless signals?

Does Jiniator Support 3 canvas display at the same time..

Similar Messages

Maybe you are looking for