Does JRun 4 Updater 6 support to run on IBM JVM 1.5?
As captioned. Thanks a lot.
Hello,
as indicated in the system requirements of SAP GUI for Java 6.40, JRE 1.4.2 is the only supported Java version on any of the platforms including Mac OS X.
Current Mac versions of SAP GUI for Java 6.40 unfortunately do not block usage of JRE 5.0 after installing Java 2 Platform Standard Edition (J2SE) 5.0 Release 4, which causes latter to become the Java default.
We have discovered this recently and starting with the next revision of SAP GUI for Java 6.40 we will make sure that it uses JRE 1.4.2 independent from the Java default.
Until then, it is required to change the Java default back to 1.4.2 like described in http://docs.info.apple.com/article.html?artnum=303526 in order to avoid unpredictable issues.
It is planend to support JRE 5.0 with the upcoming SAP GUI for Java 7.00 on all platforms including Mac OS X.
Best regards
Rolf-Martin Woersinger
SAP GUI for Java development
Similar Messages
-
I updated my Iphone 3gs to 6.1.3, after that m having this message:
"Your iPhone could not be activated because the activation server is temporarily unavailable."
"The SIM card inserted in this iPhone does not appear to be supported"
plz help me! what should i do now?You had a jailbreak and unlock.
When you updated you cooked it.
Your phone is done.
Time for a new one. -
My Macbook Pro has a black screen when running in Bootcamp Windows 7. Since I updated the mac side my windows side now starts up with completely black screen - no prompt, nothing, Cap keys still light up as does mouse and DVD drive seems to run.
Will not show up in safe mode, will not show when started from Windows 7 DVD.
I suspect the Mac update wiped out my PC video drivers but can not think of a way to re-install?
Can see the PC volume from Mac side with files.
I've looked at all the online solutions so far and have tried most of them without success. Please help!
Specs:
2009 Macbook Pro, 3.06 GHz Intel 2 core, Max 10.6.8.
Model Name: MacBook Pro
Model Identifier: MacBookPro5,2
Processor Name: Intel Core 2 Duo
Processor Speed: 3.06 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 6 MB
Memory: 4 GB
Bus Speed: 1.07 GHz
Boot ROM Version: MBP52.008E.B05
SMC Version (system): 1.42f4
Serial Number (system): 7302300GANE
Hardware UUID: B2D4B4B4-CD92-5C7A-BDC2-527D30DD8DF3
Sudden Motion Sensor:
State: EnabledEDIT: RESOLVED
For anyone else who finds their way here like I did, this link did it for me: https://forums.geforce.com/default/topic/527599/windows-8-issues-solved-please-r ead-if-you-39-re-having-black-screen-and-or-flickering-/
Specifically, the posts by Dunsany and valkyr did the trick. I booted in safe mode, uninstalled and deleted the Nvidia driver, disabled automatic driver installation, and restarted normally. I then manually downloaded and installed the previous Nvidia driver for my graphics card (which at the time of this writing was 335.23, rather than the latest which was 337.88), and everything is now bueno!
Two hiccoughs along the way: First, when I tried to uninstall the Nvidia driver the first time, when I restarted I got the login screen (which was a good sign), but it quickly went black again. I powered down, restarted in safe mode again, and repeated the uninstallation process, and it worked the second time. Second, when I started the manual install of the 335.23 driver, the computer played a sound similar to the one for disconnecting a USB device, and the screen went black. I'd seen a lot about trying to increase the brightness (though it hadn't worked up to this point; but if you haven't tried it yet, might as well); I tried it, and it worked! So far I'm back up and running. [/fingers crossed]
Hope this helps someone else! -
I own a iPhone 2G Today
He underwent updated Software
He gave me this message
"The SIM card inserted in this iPhone does not appear to be supported.
Only compatible SIM cards from a supported Carrier may be used to activate iPhone. Please insert the SIM card that came with your iPhone or visit a supported Carrier's store to receive a replacement SIM card.
I did not know what to do??Follow this article: iPhone: Troubleshooting No Service or No SIM
Symptoms
In certain situations, iPhone may present one of the following symptoms:
"Invalid SIM" or "No SIM Card installed" alert appears intermittently.
Status bar displays "No SIM" when a SIM card is installed.
Resolution
If you encounter any of the above symptoms on your iPhone, try these steps to attempt to resolve the issue:
Update your iPhone to the latest version of iOS.
Toggle Airplane mode On and Off.
Try turning iPhone off and then on again.
Check for a carrier settings update. Tap Settings > General > About. If an update is available, a prompt will appear.
Remove the SIM Card and verify that it is a valid, carrier-manufactured SIM. Also verify that it is not damaged, worn, or modified. Then reinsert it.
Restore the iPhone.
If you still are unable to resolve this issue, contact Apple support for further assistance. -
I attempted to update the software of my dated iphone 3G last evening. My phone was constatantly connected with iTunes during the process. The iOS version 4.2 downloaded and installed successfully on my phone...only to state at the end that "Your SIM does not seem to be supported. Please insert a supported SIM....". It gives me no option on the phone other than making an Emergency call. I can't even restart or reboot the phone, or access springboard, etc. The black screen displays a USB cable plugged in to the iTunes logo. Incidentlly, I have been using this SIM for many months on this phone. I also tried inserting other functional SIMs. None of this works. Can someone help please!! Thanks,
Maybe it was hacked before and now through the update it's locked back to the original carrier.
-
i updated it.. and now when i go on to itunes its saying 'The Sim Card Inserted in this phone does not seem to be supported' Helppp please
Some indian store :/
We get posts here, almost daily, from folks from India, who purchase locked iPhones in the US, only to find out they can't use them in India. I've always wondered what happens to those phones... -
With the ios 6.1 update, does iphone 4 (a1332) now supports LTE also?
Hi guys!
With the new ios 6.1 update, does iphone 4 (a1332) now supports LTE also?
Thanks guys!Software updates cannot add hardware to the device.
iOS 6.1 adds new features/software fixes, and security fixes.
Claiming it is useless is simply uninformed and uneducated.
About iOS 6.1 -
How do I install the FM10 licensing fix when Adobe Update Installer won't run?
Adobe Update Installer won't run so can't install FM10 licensing fix
This question is Not Answered.(Mark as assumed answered)
Aug 9, 2013 12:09 PM
Tags (edit): none (add)
Because FM10 began crashing with "fatal" errors whenever I tried to generate a TOC for a small (65 page) book, I researched workarounds and none of them worked. Now that I have delivered a crippled deliverable via Acrobat manipulations, I would like to fix FM. I uninstalled it and reinstalled it, got some updates, and then received the "licensing fix" error that popped up in January. I'm wondering why this fix was included not in the updates. That said, the licensing fix package, first, would not unzip so I downloaded it again. I unzipped it but I got a message that Adobe Updater Installer could not run and after several clicks I found that file. I reinstalled Adoble Update Installer but it still does not run.
I am running Windows XP and have TCS 3.5.I uninstalled FM and RH but not Acrobat, Captivate, or Photoshop.
So, now what? Listen to my supervisor who says never use FM again?
P.S. Why do I have to enter a title for my question and then do it again when this page opens??Give Adobe Support a call or contact the TCS team at [email protected] - something in your environment is causing the installer to fail (I'd guess).
-
What does Mac OS 10.5 support?
I have a G4 Power Mac AGP Sawtooth running 1.3 MHz with 2 GB RAM and 2 MB for L3. Does Mac OS 10.5 support my machine? If so, how much will the Mac OS slow down my machine?
Thank you in advance for your information.
RobertIf the 1.3 Ghz processor you put in does not act like a true PowerMac G4 1.3 Ghz in the view of the Leopard installer, it won't let you install. The processor needs specialized support from its manufacturer to allow Leopard to install, or third party software called Leopard Assist. Either way, you are building yourself a jalopy, because it is not officially tested as a configuration by Apple. Any updates you do past an unofficially tested configuration you are on your own or at the mercy of the vendor who supplied the processor.
Apple set the limit based on its built-in processors and its firmware. The firmware supplied by third party firmware for upgraded processors is different. -
Does this mean that HP Support Assistance is FAILING?
When running HP Support Assistance / then selecting HP updates / then 'Check for HP updates now', I have the following result.
"Connecting to HP servers = Check Mark"
"Downloading messages and updates defiinition = Gray X"
"Gathering configuration information = Gray X"
"Analysing your system = Gray X"
"Preparing the action list = Gray X"
Does this mean that HP Support Assistance is FAILING? or does it mean that it connected to
HP servers, and determined that No Updates Needed?
Because I was reading it as FAILING and I have uninstalled the version that comes preinstalled, and I have reinstalled the Newest Version (Download file: sp68201.exe)
I run it after reinstalled and I get ALL CHECK MARKS, but if I run it another time I get the same
One Check Mark, and the Rest are Gray X's
http://www8.hp.com/us/en/campaigns/hpsupportassistant/ -Link to Current Latest software...
HP Envy Model: m7-k111dx
Does this mean that HP Support Assistance is FAILING?And its another day.... and yet again I run update and it Has Gray X's ( Which i read as Fails..... ) and so yet again, I uninstall and reinstall HP Support Assistance, and Again it Runs correctly The First Time, and gives me all Green Check Marks,,,,,,,,,,, However I run it again and Back to All Gray X's.
My Conculsion, Support Assistance Runs Correctly on First Run, But Fails there-after.
= HP Support Assistance is broken. -
So my Macbook was not booting up so I resorted to using Disk Utility...it has been stuck on "updating boot support partitions for the volume as required" for over two days.
Has anyone else had to wait this long?
I have read that I should leave it until I get another message but I saw this reply on another site....
"Hi everybody, the message: “Updating boot support partitions for the volume as required.“ means: the Disk Utilities is telling you what it is doing: 'Disk Utilities': "(I'm) Updating boot support partitions for the volume as required (& I'm done with it)." So when you see this message, the DS (Disk Utilities) is done & you can close the application"...
Any advice/tips would be greatly appreciated!Doesn't have to be another MacBook - any Mac with FireWire (400 or 800) will do. FW 400 to 800 adapters or adapter cables should be available from any computer store.
Instructions for FWTDM -
Disconnect all other FireWire devices from both computers before you use FireWire target disk mode. Do not connect any FireWire devices until after you have disconnected the two computers from each other or have stopped using target disk mode.
To use FireWire target disk mode
1. Make sure that the target computer is turned off.
2. If you are using an Apple portable computer such as a PowerBook or MacBook as the target computer, plug in its AC power adapter.
3. Use a FireWire cable to connect the target computer to a host computer. The host computer can be powered on.
4. Start up the target computer and immediately press and hold down the T key until the FireWire icon appears. The hard disk of the target computer should become available to the host computer and will likely appear on desktop. (If the target computer is running Mac OS X v10.4 Tiger, you can also open System Preferences, choose Startup Disk, and click Target Disk Mode. Restart the computer and it will start up in Target Disk Mode.)
5. When you are finished copying files, locate the target computer's hard disk icon on the desktop of the host computer and drag it to the Trash or choose Eject (or Put Away) from the File menu.
6. Press the target computer's power button to turn it off.
7. Unplug the FireWire cable.
(extract from http://support.apple.com/kb/HT1661) -
I have an apple iphone 4 that I want to download audio books from my library onto. I cannot figure out how to do that. The iphone does not show up on my mac laptop as a connected device. Does this kind of download have to run through itunes? Thanks
Yes it is done through iTunes. The iPhone will never show up in Finder as a device. The following is general information on iTunes sync: http://support.apple.com/kb/HT1386 and the following is a previous discussion where the post by Andreas Junge helped others that had a problem syncing audiobooks: https://discussions.apple.com/message/20052732#20052732
-
After doing a widows update itunes will not work at all
after doing a widows update itunes will not work at all
hiya!
I get the itunes has encounterd a problem and needs to close, sorry for the inconvenience error, no specific error number. I do not have QT installed,
not having QT installed is what will be causing your itunes error message at the moment. let's try a careful standalone QT 7.1 install.
download and save a copy of the QT 7.1 standalone installer to your hard drive. (we'll run the install from there rather than online.) switch off antivirus and antispyware applications prior to the install.
Quicktime 7.1 Standalone Installer
if that install goes through okay, does your itunes launch properly again?
(if you get an error message on the QT standalone reinstall, let us know what it says. include error message numbers if you're getting any.)
love, b -
i was doing the software update to my iphone 4s and my phone died. i pluged it in and when it turned on after the white apple the screen showes the blue itunes logo over the word itunes over an image of a charger. i tried reseting my phone. i cant figure out how to get past this point
See Here > http://support.apple.com/kb/HT1808
-
Will doing the software update to 6.1.2 destroy any info saved on my iPhone 4? If so how do I back up what is on there - especially the contact list?
see the link above
and this discussed in above
http://support.apple.com/kb/ht1766
Maybe you are looking for
-
Need help in Multi language XML Publisher report
Hi Experts, I am working in EBS R12, database 10g. I am have a requirement to develop the multilanuge XML Publisher report. Details i have till now: query in report builder: select * from emp; RTF: created RTF(test_rtf) Datadefinition: test_dd Templa
-
When trying to download updates for Pages etc, I get this error message: There was an error in the App Store. Please try again later. (20)
-
Long text problem while uploading Inspection plan through BDC.
Hi, I am facing some problem while uploading the inspection plan. There are few MICs for which we are having long text, while uploading the inspection plan through BDC - some other long text is getting copied into the MIC's long text. After checking
-
Photoshop cs3 and cs4 brush lag /snow leopard 10.6.6
Having occasional brush lag using these apps. Not due to wacom, does same with mouse. Discussions going on at adobe forums. I have ATI 5770 in mac pro 2.8 quad. Don't want to update to 10.6.7 due to font/pdf issues. Spoke to apple person, who couldn'
-
Having trouble connecting my Canon MX 870 Printer wirelessly to my MacBook Pro. The instructions ask for me to enter the "access point" from the router (I use Time Machine). Right now, it's set to "My Network", but that won't work any more. What is t