Does KDL60R510A have 60hz or 120hz refresh rate?

Hi everyone! This TV is in the Black Friday ad on page 5 - SKU 8548083. The Best Buy website, as well as a competing retailer, list this TV at 120hz refresh rate. Sony's website along with a separate competing retailer list at just 60hz. I'm looking for a new TV this holiday season but I need clarification on this before I can make a decision. Anyone have additional info on that?? Thanks!

I know those advertisements are inconsistent and confusing. The TV has a "Native" refresh rate of 60hz as most TV's sold in america do. That set has the "Motionflow™ Technology : Motionflow XR 240" which quadruples the refresh rate internally to 240hz. So the answer to your question is that it has a 240hz refresh rate.

Similar Messages

MY FIREFOX does not have a URL box, refresh, back/forward buttons or a tool bar with file, view, tools, etc.

<blockquote>Locking thread.<br>
Please continue here: [/questions/786744]</blockquote><br>
Hi again,
There's no bar that says file, tools, view, (other?) OR URL box, reload button or back/forward buttons, so I can't even do some of the things people are suggesting, like run in safe mode. This requires using the file button. The suggestions I'm getting all require using the bar that I don't have. I also uninstalled and reinstalled firefox to see if it would change, but it didn't. I've still got the same problem.
Would LOVE to take care of this soon. It's causing me to put some projects on hold. Annette

See your original question: https://support.mozilla.com/en-US/questions/786744#answer-142144

HT202856 What resolutions and refresh rates does the MacBook Pro support?

Why does this article provide lots of useful information EXCEPT the piece I want? It does not show what resolutions and refresh rates the MacBook Pro supports over Displayport:
http://support.apple.com/kb/HT6008
I've heard it only supports 4k at 30 Hz. Is this true?

For some reason Displays no longer shows that information, so I don't know what it is. However, the last time I saw the information on a 2009 MBP it was 75.
I'd think there is a utility around that might provide the info like Display Maestro 1.1.7 or SwitchResX.

How Can I change my refresh rate to 75hz for on LCD using 91.47 drivers?

HI,
I use a 19" LCD and have always changed my refresh rate to 75hz to avoid ghosting in games like fifa 06 (60hz causes a nasty ghost on my 8ms panel). I have been using the 81.98 drivers and could create an override to use 75. The new driver will allow me to change the refresh rate to 75, but will not let me use it - I get the message "The custom resolution cannot be added". I have coolbits2 installed. Is there a registry setting that I can add to allow me to change the refresh rate? If not, I'll just go back to the 81.98. I am also using the DVI connection.
Thank you,
* This is on my Sli PC in my sig. *

I know that on my particular LCD monitor, if I go above the recommended rates, then the screen will just go black and won't let me see anything. Usually it displays a message telling me that it cannot display. I think it especially does this with the DVI connection.
You may have tried it allready, but just make sure that in your display properties you have unchecked the option to only display resolutions allowed by the monitor.
You may also want to try and see if it will let you do it with a VGA connection instead of the DVI.
Otherwise, you just may have to go back to the earlier driver.

Satellite U200 - questions about screen refresh rate

Sattellite U200-148 WINXPHOMESP2
Video adapter Mobile Intel (R) 945GM Express Chipset Family
Volume of video of memory 128
Problem Accelerated Graphics Port - it is inaccessible
Frequency of hertz the screen 60
Questions
1) Accelerated Graphics Port - there is enabled if yes that that it is necessary to make that it became accessible.
2) whether Frequency of hertz with 60 can be raised even up to 75.

Hi
I have noticed that on some Toshiba notebooks the screen refresh rate is fixed on 60 Hz.
The display refresh rate is not important on the notebook screens.
TFT matrix doesn't have such thing as refresh rate. It doesn't blink.
TFT like all other LCD screens doesn't have refresh rate parameter, only reaction time.
Your eyes are safe ;)
Ps: As far as I know the AGP port is not available.

Set permanent monitor refresh rate without xorg.conf

Hi everyone,
Came back to archlinux, made a clean install with gnome 3. Found out that my GDM and Gnome monitor refresh rate is wrong. For GDM I solved it by adding xrandr -s 1024x768 -r 85 to the gdm init script. Maybe it's ugly, but at least working. I've got no xorg.conf and I don't want to create it only because of this problem. Using GUI screen settings in System preferences I managed only to set permanently correct resolution (1024x768) but the refresh rate cannot be changed there, so every time I boot now I have correct resolution and refresh rate for GDM, but after login I have 1024x768@60 only, so I have to manually issue 'xrandr -r 85' every time I login. Can I fix it without creating xorg.conf file under /etc/X11? What I already tried was creating the config file under /etc/X11/xorg.conf.d/ and set proper resolution and refresh rate there, but it didn't help. If someone has advice or idea, i will be very grateful. Thanks a lot in advance.

I think you need to specify the values from the manufacturer's website.
Here's my /etc/X11/xorg.conf.d/10-monitor.conf:
Section "Monitor"
Identifier "Monitor0"
VendorName "DELL"
ModelName "U2311H"
HorizSync 30.0 - 83.0
VertRefresh 56.0 - 76.0
Option "DPMS"
EndSection
Section "Device"
Identifier "Device0"
Driver "nouveau"
VendorName "NVIDIA Corporation"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
EndSubSection
EndSection
I probably don't need to specify "Driver" with open-source drivers, but it's easier to just replace it with "nvidia", since I sometimes switch to the proprietary ones.
$ xrandr
Screen 0: minimum 320 x 200, current 1920 x 1080, maximum 4096 x 4096
VGA-1 connected 1920x1080+0+0 (normal left inverted right x axis y axis) 509mm x 286mm
1920x1080 60.0*+
1680x1050 60.0
1680x945 60.0
1400x1050 74.9 60.0
1600x900 60.0
1280x1024 75.0 60.0
1440x900 75.0 59.9
1280x960 60.0
1366x768 60.0
1360x768 60.0
1280x800 74.9 59.8
1152x864 75.0
1280x768 74.9 59.9
1024x768 75.1 70.1 60.0
1024x576 60.0
800x600 72.2 75.0 60.3 56.2
848x480 60.0
640x480 72.8 75.0 60.0
720x400 70.1

Refresh rate going to 60Hz when leaving fullscreen games

i am using nvidia blob drivers on a single monitor setup - they're working fine except that often (always?) when i am leaving openGL fullscreen game, the refresh rate defaults to 60 (from 75 Hz). anyone knows how to fix this? thanks, jose

R00KIE wrote:Your card seems to support dvi, your monitor supports dvi and a dvi cable should have come with it. Any reason why you're not using the dvi interface?
this is actually a very good question. i used to have this connected via vga because of second monitor on dvi in my past multiheaded setup but now that i got rid of it.. i completely forgot about using vga. i switched to dvi now and i think the situation is now better - will need to test a few games though. this is how xrandr output looks now:
$ xrandr
xrandr: Failed to get size of gamma for output default
Screen 0: minimum 320 x 175, current 1280 x 1024, maximum 1280 x 1024
default connected 1280x1024+0+0 0mm x 0mm
1280x1024 50.0* 51.0
1280x960 52.0
1152x864 53.0
1024x768 54.0 55.0 56.0 57.0 58.0 59.0
960x720 60.0
928x696 61.0
896x672 62.0 63.0
832x624 64.0
800x600 65.0 66.0 67.0 68.0 69.0 70.0 71.0 72.0 73.0 74.0
720x400 75.0
700x525 76.0 77.0
640x512 78.0 79.0 80.0
640x480 81.0 82.0 83.0 84.0 85.0 86.0 87.0 88.0
640x400 89.0
640x350 90.0
576x432 91.0
512x384 92.0 93.0 94.0 95.0 96.0
416x312 97.0
400x300 98.0 99.0 100.0 101.0 102.0
360x200 103.0
320x240 104.0 105.0 106.0 107.0
320x200 108.0
320x175 109.0

What refresh rates does the Macbook Pro 2011 support? (Internal Display)

While I know you used to be able to change the refresh rate via General Settings, now you have to use an app or probably something terminal related.
Ignoring this, I just got a new 2011 MBP when my old one couldn't be fixed and after having the display/resolution upgraded I noticed that, when scrolling webpages, there is a bit of... I dunno, ghosting or something? Nothing that indicates there is a problem with the display or card, but it's something that could probably be fixed by a stronger refresh rate.
So my question is as the subject states. What is supported? I read 60 and 75 is typical for Apple, but I want confirmation. Remember, internal display, not external.
Thanks!

For some reason Displays no longer shows that information, so I don't know what it is. However, the last time I saw the information on a 2009 MBP it was 75.
I'd think there is a utility around that might provide the info like Display Maestro 1.1.7 or SwitchResX.

Does my TFTs refresh rate matter?

Hello everyone!
I've been an Arch Linux user for a few hours now and have got it running quite nicely. I love Arch I've configured my soundcard and installed GNOME. All works fine, however I can't change the refresh rate of my screen which is set to 50 herz.
I've got a Hanns G HW191D which is a TFT screen. So here's my question:
Is 50 herz enough (Someone told me the refresh rate doesn't matter if you have a TFT screen) or should I find a way of increasing it?
Thanks a lot in advance,
chell

detto wrote:
I just configured KDE on my arch system and The only two options I have are 50 and 55 hz.
It's an X bug, causing to display wrong Hz in applications (like kcontrol, or gnome's setting dialog). Try to look at your monitor's OSD menu for "display info" or similiar. There u'll find the correct Hz that is used. Mine e.g. is running at 75 Hz, which is also the preferred for it, but configuring it by a GUI always shows 50Hz.
cheers,
deTTo
So true.. I always check my monitor's OSD menu to check the refresh rates (be it CRT or LCD). Why let the software tell you when the monitor knows for sure

I have an Apple Configurator install that wont recognize an iPad when I attach it via USB. I cant prepare it or refresh it. It was supervised. I get an error message that says "policy does not have correct profile data". Please help!!!

I have an Apple Configurator install that wont recognize an iPad when I attach it via USB. I cant prepare it or refresh it. It was supervised. I get an error message that says "policy does not have correct profile data". At some point there was a mismatch between the profile on the iPad and the MAC server. The profile on the MAC server has been deleted and the iPad has been erased and reset to default. I need to be able to get Configurator to recognize this device to prepare it for deployment and issue Apps to it. Please help!!

Run the application 'Terminal.app' which you will find in '/Applications/Utilities' on your Macintosh.
Type this into it: defaults delete com.apple.configurator PreprationSavedPolicyDefaultsKey
Hit the return key.
If you get no error message, it worked, and you can quit the app.

I have a macbook pro 2009 and I want to find out what the refresh rate is, I need it to be 70 hz

I need to find out what the refresh rate is. I went into system preferences and clicked on display, and saw refresh rate, but it said n/a. I need mine to be at least 70 hz, I can't find the answer anywhere.

Where did you search? Read the information from Kappy in - https://discussions.apple.com/thread/3298134?start=0&tstart=0

Second monitor has a 50Hz refresh rate; my mac's lowest output is 60. What can I do?

I'm trying to get my 13" Late-2011 macbook pro to work with either of two second monitors so I can use logic more easily. One's a DELL thing with a screen res of 1280x1024 (though does work on some higher res') which I had working yesterday till I accidentally knocked the adaptor the slightest bit and now I can't make the second screen stay on for more than a few seconds whatever settings I try. Usually the monitor is on (ie not in power save mode) but just displaying nothing, and my mac behaves as if the second monitor is there.
The other one's a Toshiba 20WLT56B Tv with VGA input. The prob with this one is that it's refresh rate is 50Hz and the lowest option I have for my mac is 60Hz. Is there any way to allow me to output at 50Hz instead?
Cheers

if it's a message coming from your yahoo account, it means that your account has been compromised, not your phone itself. i would suggest changing the password for your email account

13rMBP Mid2014 HDMI does not have 3840x2160 option?

Does the rMBP 13" Mid2014 HDMI connection allow 3840x2160 resolution?
Support article: HT6008 says it should for this model.
You can use 4K displays and Ultra HD TVs at the following resolutions and refresh rates via the built-in HDMI port.
3840 x 2160 at 30 Hz refresh rate
4096 x 2160 at 24 Hz refresh rate (mirroring is not supported at this resolution)
I have it directly connected to my HDTV via HDMI cable and selected 24hz as I know it does not support 60hz.
Only offers 1080p....
I tried a miniDP to HDMI adapter and that did not work and it used to. I think this adapter may not support 4k or be an active adapter.
Just ordered an active adapter that should work, but I am believe it should work through HDMI port on this unit based on HT6008 article.
-R

I just found another thread that has my same exact issue.
Can't get 4k support with Seiki 39" TV through HDMI
Will follow that thread for resolution.

Xorg and refresh rates

I'm running Solaris Express 10 x86 4/05 on a Dell Optiplex GX260. Xorg refuses to give me a refresh rate higher than 60Hz. This is using the i810 driver but it also happens with the VESA driver. Here's my xorg.conf:
Section "Module"
# This loads the DBE extension module.
    Load        "dbe"   # Double buffer extension
# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
    SubSection "extmod"
      Option    "omit xfree86-dga"   # don't initialise the DGA extension
    EndSubSection
# This loads the font modules
    Load        "bitstream"
    Load        "type1"
#    Load        "speedo"
# This loads the Xst module
     Load       "Xst"
# This loads the SolarisIA module
     Load       "IA"
# This loads the GLX module
#    Load       "glx"
# This loads the DRI module
#    Load       "dri"
EndSection
# Files section. This allows default font and rgb paths to be set
Section "Files"
# The location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.
    RgbPath     "/usr/X11/lib/X11/rgb"
# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
    FontPath   "/usr/X11/lib/X11/fonts/TrueType/"
    FontPath   "/usr/X11/lib/X11/fonts/Type1/"
    FontPath   "/usr/X11/lib/X11/fonts/Type1/sun/"
    FontPath   "/usr/X11/lib/X11/fonts/F3bitmaps/"
    FontPath   "/usr/X11/lib/X11/fonts/misc/"
    FontPath   "/usr/X11/lib/X11/fonts/100dpi/"
    FontPath   "/usr/X11/lib/X11/fonts/75dpi/"
#    FontPath   "/usr/X11/lib/X11/fonts/local/"
#    FontPath   "/usr/X11/lib/X11/fonts/Speedo/"
#    FontPath   "/usr/X11/lib/X11/fonts/freefont/"
# The module search path. The default path is shown here.
#    ModulePath "/usr/X11/lib/modules"
EndSection
# Server flags section.
Section "ServerFlags"
# Uncomment this to cause a core dump at the spot where a signal is
# received. This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging
#    Option "NoTrapSignals"
# Uncomment this to disable the <Crtl><Alt><Fn> VT switch sequence
# (where n is 1 through 12). This allows clients to receive these key
# events.
#    Option "DontVTSwitch"
# Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
# This allows clients to receive this key event.
#    Option "DontZap"
# Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
# sequences. This allows clients to receive these key events.
#    Option "Dont Zoom"
# Uncomment this to disable tuning with the xvidtune client. With
# it the client can still run and fetch card and monitor attributes,
# but it will not be allowed to change them. If it tries it will
# receive a protocol error.
#    Option "DisableVidModeExtension"
# Uncomment this to enable the use of a non-local xvidtune client.
#    Option "AllowNonLocalXvidtune"
# Uncomment this to disable dynamically modifying the input device
# (mouse and keyboard) settings.
#    Option "DisableModInDev"
# Uncomment this to enable the use of a non-local client to
# change the keyboard or mouse settings (currently only xset).
#    Option "AllowNonLocalModInDev"
EndSection
# Input devices
# Core keyboard's InputDevice section
Section "InputDevice"
    Identifier "Keyboard1"
    Driver      "Keyboard"
# For most OSs the protocol can be omitted (it defaults to "Standard").
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
# uncomment the following line.
#    Option     "Protocol"      "Xqueue"
    Option "AutoRepeat" "500 30"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
#    Option     "Xleds"      "1 2 3"
#    Option "LeftAlt"     "Meta"
#    Option "RightAlt"    "ModeShift"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
#    Option "XkbModel"    "pc105"
# If you have a US Microsoft Natural keyboard, you can use:
#    Option "XkbModel"    "microsoft"
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
#    Option "XkbLayout"   "de"
# or:
#    Option "XkbLayout"   "de"
#    Option "XkbVariant" "nodeadkeys"
# If you'd like to switch the positions of your capslock and
# control keys, use:
#    Option "XkbOptions" "ctrl:swapcaps"
# These are the default XKB settings for Xorg
#    Option "XkbRules"    "xorg"
#    Option "XkbModel"    "pc105"
#    Option "XkbLayout"   "us"
#    Option "XkbVariant" ""
#    Option "XkbOptions" ""
#    Option "XkbDisable"
    Option "XkbRules"   "xorg"
    Option "XkbModel"   "pc101"
    Option "XkbLayout" "us"
EndSection
# Core Pointer's InputDevice section
Section "InputDevice"
# Identifier and driver
    Identifier "Mouse1"
    Driver      "mouse"
    Option "Protocol"    "Auto"
    Option "Device"      "/dev/mouse"
# Mouse-speed setting for PS/2 mouse.
#    Option "Resolution"        "256"
# When using XQUEUE, comment out the above two lines, and uncomment
# the following line.
#    Option "Protocol" "Xqueue"
# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.
#    Option "BaudRate" "9600"
#    Option "SampleRate"        "150"
# Emulate3Buttons is an option for 2-button Microsoft mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)
    Option "Emulate3Buttons"
#    Option "Emulate3Timeout"    "50"
# ChordMiddle is an option for some 3-button Logitech mice
#    Option "ChordMiddle"
EndSection
# Other input device sections
# this is optional and is required only if you
# are using extended input devices. This is for example only. Refer
# to the xorg.conf man page for a description of the options.
# Section "InputDevice"
#    Identifier "Mouse2"
#    Driver      "mouse"
#    Option      "Protocol"      "MouseMan"
#    Option      "Device"        "/dev/mouse2"
# EndSection
# Section "InputDevice"
#    Identifier "spaceball"
#    Driver     "magellan"
#    Option     "Device"        "/dev/cua0"
# EndSection
# Section "InputDevice"
#    Identifier "spaceball2"
#    Driver     "spaceorb"
#    Option     "Device"        "/dev/cua0"
# EndSection
# Section "InputDevice"
#    Identifier "touchscreen0"
#    Driver     "microtouch"
#    Option     "Device"        "/dev/ttyS0"
#    Option     "MinX"          "1412"
#    Option     "MaxX"          "15184"
#    Option     "MinY"          "15372"
#    Option     "MaxY"          "1230"
#    Option     "ScreenNumber" "0"
#    Option     "ReportingMode" "Scaled"
#    Option     "ButtonNumber" "1"
#    Option     "SendCoreEvents"
# EndSection
# Section "InputDevice"
#    Identifier "touchscreen1"
#    Driver     "elo2300"
#    Option     "Device"        "/dev/ttyS0"
#    Option     "MinX"          "231"
#    Option     "MaxX"          "3868"
#    Option     "MinY"          "3858"
#    Option     "MaxY"          "272"
#    Option     "ScreenNumber" "0"
#    Option     "ReportingMode" "Scaled"
#    Option     "ButtonThreshold"       "17"
#    Option     "ButtonNumber" "1"
#    Option     "SendCoreEvents"
# EndSection
# Monitor section
# Any number of monitor sections may be present
Section "Monitor"
    Identifier "My Monitor"
# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
    HorizSync   30-85
#    HorizSync 30-64         # multisync
#    HorizSync 31.5, 35.2    # multiple fixed sync frequencies
#    HorizSync 15-25, 30-50 # multiple ranges of sync frequencies
# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
    VertRefresh 48-120
EndSection
# Graphics device section
# Any number of graphics device sections may be present
# Standard VGA Device:
Section "Device"
    Identifier "Standard VGA"
    VendorName "Unknown"
    BoardName   "Unknown"
# The chipset line is optional in most cases. It can be used to override
# the driver's chipset detection, and should not normally be specified.
#    Chipset    "generic"
# The Driver line must be present. When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
# module. Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this section.
    Driver     "vga"
# The BusID line is used to specify which of possibly multiple devices
# this section is intended for. When this line isn't present, a device
# section can only match up with the primary video device. For PCI
# devices a line like the following could be used. This line should not
# normally be included unless there is more than one video device
# intalled.
#    BusID      "PCI:0:10:0"
#    VideoRam   256
#    Clocks     25.2 28.3
EndSection
# Device configured by xorgconfig:
Section "Device"
    Identifier "** Intel i810 (generic)               [i810]"
    Driver      "i810"
    VideoRam    8192
    # Insert Clocks lines here if appropriate
EndSection
# Screen sections
# Any number of screen sections may be present. Each describes
# the configuration of a single screen. A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
Section "Screen"
    Identifier "Screen 1"
    Device      "** Intel i810 (generic)               [i810]"
    Monitor     "My Monitor"
    DefaultDepth 24
    Subsection "Display"
        Depth       8
        Modes       "1024x768"
        ViewPort    0 0
    EndSubsection
    Subsection "Display"
        Depth       16
        Modes       "1024x768"
        ViewPort    0 0
    EndSubsection
    Subsection "Display"
        Depth       24
        Modes       "1024x768"
        ViewPort    0 0
    EndSubsection
EndSection
# ServerLayout sections.
# Any number of ServerLayout sections may be present. Each describes
# the way multiple screens are organised. A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option. In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.
Section "ServerLayout"
# The Identifier line must be present
    Identifier "Simple Layout"
# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens. The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen. In this example, screen 2 is located to the
# right of screen 1.
    Screen "Screen 1"
# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used. Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".
    InputDevice "Mouse1" "CorePointer"
    InputDevice "Keyboard1" "CoreKeyboard"
EndSection
# Section "DRI"
#    Mode 0666
# EndSectionIf I use the Xsun server, everything works great. I get 1024x768 at 85Hz. With Xorg, I get 1024x768 at 60Hz. Why won't Xorg drive the display at a decent refresh rate?
Thanks.

I upped the log verbosity on Xorg and checked the Xorg.0.log file. I found some interesting things.
First, I found this line:
(II) I810(0): Will use BIOS call 0x5f05 to set refresh rates for CRTs.
Later on, I found these:
(WW) I810(0): Extended BIOS function 0x5f05 not supported.
(II) I810(0): BIOS call 0x5f05 not supported, setting refresh with VBE 3 method.
(WW) I810(0): Set VBE Mode rejected this modeline.
Trying standard mode instead!
Presumably, "standard mode" is an eye-watering 60Hz.
This is on a Dell Optiplex GX260 with BIOS revision A09. The video chipset is an onboard Intel 82845 and the driver is Xorg's i810.
Everything works fine with Sun's X server. I get a nice 87Hz refresh at 1024x768. I'm surprised that Xorg can't set the refresh on this machine. It's listed as Test Suite Level 2 certified in the HCL. Unless somebody can tell me what I'm doing wrong here, I'm going to post this incompatibility as a comment on the HCL.

Judder using Mplayer... maybe force different resolution/refresh rate?

Hi!
(I posted this in the newbie section too, but this is maybe the most appropriate place??)
I've set up my computer as a media center using Freevo. As the main media player in Freevo I use Mplayer. The setup is working beautifully, but I'm getting some judder and it's a bit annoying. It's most noticable during bright, fast moving scenes.
So I've been trying to figure out how to remedy this, but it's harder than I thought. My setup is the following:
AMD 4200+ dual core, 2 gigs ram, Nvidia 7800GTX, 24" LCD and Pioneer LX508D plasma TV, and I'm using CoreAVC as decoder (amazing piece of software )
When I bought the 24" screen for my computer the sales guy (using windows) forced the resolution to 1920x1080. It looked a bit stretched, but if I could do this in Linux I'd avoid having parts of the picture missing on my TV. Now I have to use 1920x1200 resolution as main X session and since my TV is 1920x1080 parts of the desktop is out of view on my TV. This isn't too big of a deal though cause when playing movies they come out in 1920x1080. It'd be nice though to get the correct aspect ratio between my pc screen and my TV (I've been trying to use Twinview and clone, but it's impossible to use 1920x1200 on the 24" and 1920x1080 on the TV at the same time). I've tried to force my pc screen to use 1920x1080 (since it worked in windows it's supposed to be possible), but when I enable it through xorg.conf the screen goes blank. Using nvidia-settings doesn't give me the option of using 1920x1080 on the 24" at all.
So what I'm hoping to be able to do is to force the computer screen to use 1920x1080 and a refresh rate of 72Hz. This should eliminate alot of the judder and at the same time I won't have to use the "PC mode" on my TV (PC mode restrict the Hz to max 60Hz). Hopefully the TV will accept the 1920x1080 72Hz as any input and let me use the normal input (and then be able to use 72Hz... or 96Hz for that matter).
Anyone know how I might be able to do that? I'd really appreciate any help at all since this is the only thing that's not perfect with my setup.

Ok, I tried to change the xorg.conf file to 72Hz on the TV and it when black again. This is what the xorg.0.log shows:
X.Org X Server 1.4.2
Release Date: 11 June 2008
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.25-ARCH i686
Current Operating System: Linux arch 2.6.25-ARCH #1 SMP PREEMPT Mon Jul 14 15:25:51 UTC 2008 i686
Build Date: 21 June 2008 05:47:59PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sat Jul 19 13:36:04 2008
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "X.org Configured"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Videocard0"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(**) Option "Xinerama" "0"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/Type1" does not exist.
Entry deleted from font path.
(==) Including the default font path /usr/share/fonts/misc,/usr/share/fonts/100dpi:unscaled,/usr/share/fonts/75dpi:unscaled,/usr/share/fonts/TTF,/usr/share/fonts/Type1.
(**) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1
(**) RgbPath set to "/usr/share/X11/rgb"
(**) ModulePath set to "/usr/lib/xorg/modules"
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) Loader magic: 0x81e0a60
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.3
X.Org Video Driver: 2.0
X.Org XInput driver : 2.0
X.Org Server Extension : 0.3
X.Org Font Renderer : 0.5
(II) Loader running on linux
(II) LoadModule: "pcidata"
(II) Loading /usr/lib/xorg/modules//libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
ABI class: X.Org Video Driver, version 2.0
(--) using VT number 3
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 1002,5950 card 103c,2a24 rev 10 class 06,00,00 hdr 00
(II) PCI: 00:02:0: chip 1002,5a34 card 0000,0000 rev 00 class 06,04,00 hdr 01
(II) PCI: 00:12:0: chip 1002,4379 card 103c,2a24 rev 00 class 01,01,8f hdr 00
(II) PCI: 00:13:0: chip 1002,4374 card 103c,2a24 rev 00 class 0c,03,10 hdr 80
(II) PCI: 00:13:1: chip 1002,4375 card 103c,2a24 rev 00 class 0c,03,10 hdr 00
(II) PCI: 00:13:2: chip 1002,4373 card 103c,2a24 rev 00 class 0c,03,20 hdr 00
(II) PCI: 00:14:0: chip 1002,4372 card 103c,2a24 rev 11 class 0c,05,00 hdr 80
(II) PCI: 00:14:1: chip 1002,4376 card 103c,2a24 rev 00 class 01,01,8a hdr 00
(II) PCI: 00:14:3: chip 1002,4377 card 103c,2a24 rev 00 class 06,01,00 hdr 80
(II) PCI: 00:14:4: chip 1002,4371 card 0000,0000 rev 00 class 06,04,01 hdr 81
(II) PCI: 00:18:0: chip 1022,1100 card 0000,0000 rev 00 class 06,00,00 hdr 80
(II) PCI: 00:18:1: chip 1022,1101 card 0000,0000 rev 00 class 06,00,00 hdr 80
(II) PCI: 00:18:2: chip 1022,1102 card 0000,0000 rev 00 class 06,00,00 hdr 80
(II) PCI: 00:18:3: chip 1022,1103 card 0000,0000 rev 00 class 06,00,00 hdr 80
(II) PCI: 01:00:0: chip 10de,0091 card 10de,02c2 rev a1 class 03,00,00 hdr 00
(II) PCI: 02:01:0: chip 13f6,0111 card 153b,1144 rev 10 class 04,01,00 hdr 00
(II) PCI: 02:03:0: chip 10ec,8139 card 103c,2a24 rev 10 class 02,00,00 hdr 00
(II) PCI: 02:04:0: chip 1106,3044 card 103c,2a24 rev 80 class 0c,00,10 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,2), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:2:0), (0,1,1), BCTRL: 0x000a (VGA_EN is set)
(II) Bus 1 I/O range:
[0] -1 0 0x0000e000 - 0x0000efff (0x1000) IX[b]
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0xfa000000 - 0xfcffffff (0x3000000) MX[b]
(II) Bus 1 prefetchable memory range:
[0] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:20:3), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(II) Subtractive PCI-to-PCI bridge:
(II) Bus 2: bridge is at (0:20:4), (0,2,2), BCTRL: 0x0002 (VGA_EN is cleared)
(II) Bus 2 I/O range:
[0] -1 0 0x0000d000 - 0x0000dfff (0x1000) IX[b]
(II) Bus 2 non-prefetchable memory range:
[0] -1 0 0xfde00000 - 0xfdefffff (0x100000) MX[b]
(II) Bus 2 prefetchable memory range:
[0] -1 0 0xfdd00000 - 0xfddfffff (0x100000) MX[b]
(--) PCI:*(1:0:0) nVidia Corporation G70 [GeForce 7800 GTX] rev 161, Mem @ 0xfa000000/24, 0xd0000000/28, 0xfb000000/24, I/O @ 0xef00/7
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) OS-reported resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
(II) PCI I/O resource overlap reduced 0x00004100 from 0x0000411f to 0x000040ff
(II) PCI Memory resource overlap reduced 0xe0000000 from 0xe0000000 to 0xdfffffff
(II) Active PCI resource ranges:
[0] -1 0 0xfdefe000 - 0xfdefe7ff (0x800) MX[b]
[1] -1 0 0xfdeff000 - 0xfdeff0ff (0x100) MX[b]
[2] -1 0 0xfe02b000 - 0xfe02b3ff (0x400) MX[b]
[3] -1 0 0xfe02c000 - 0xfe02cfff (0x1000) MX[b]
[4] -1 0 0xfe02d000 - 0xfe02dfff (0x1000) MX[b]
[5] -1 0 0xfe02e000 - 0xfe02efff (0x1000) MX[b]
[6] -1 0 0xfe02f000 - 0xfe02f1ff (0x200) MX[b]
[7] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[b]O
[8] -1 0 0xfb000000 - 0xfbffffff (0x1000000) MX[b](B)
[9] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
[10] -1 0 0xfa000000 - 0xfaffffff (0x1000000) MX[b](B)
[11] -1 0 0x0000dd00 - 0x0000dd7f (0x80) IX[b]
[12] -1 0 0x0000de00 - 0x0000deff (0x100) IX[b]
[13] -1 0 0x0000df00 - 0x0000dfff (0x100) IX[b]
[14] -1 0 0x0000f800 - 0x0000f80f (0x10) IX[b]
[15] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[16] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[17] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[18] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[19] -1 0 0x00000500 - 0x0000050f (0x10) IX[b]
[20] -1 0 0x0000fa00 - 0x0000fa0f (0x10) IX[b]
[21] -1 0 0x0000fb00 - 0x0000fb03 (0x4) IX[b]
[22] -1 0 0x0000fc00 - 0x0000fc07 (0x8) IX[b]
[23] -1 0 0x0000fd00 - 0x0000fd03 (0x4) IX[b]
[24] -1 0 0x0000fe00 - 0x0000fe07 (0x8) IX[b]
[25] -1 0 0x0000ef00 - 0x0000ef7f (0x80) IX[b](B)
(II) Inactive PCI resource ranges:
[0] -1 0 0x00004100 - 0x000040ff (0x0) IX[b]O
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xfdefe000 - 0xfdefe7ff (0x800) MX[b]
[1] -1 0 0xfdeff000 - 0xfdeff0ff (0x100) MX[b]
[2] -1 0 0xfe02b000 - 0xfe02b3ff (0x400) MX[b]
[3] -1 0 0xfe02c000 - 0xfe02cfff (0x1000) MX[b]
[4] -1 0 0xfe02d000 - 0xfe02dfff (0x1000) MX[b]
[5] -1 0 0xfe02e000 - 0xfe02efff (0x1000) MX[b]
[6] -1 0 0xfe02f000 - 0xfe02f1ff (0x200) MX[b]
[7] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[b]O
[8] -1 0 0xfb000000 - 0xfbffffff (0x1000000) MX[b](B)
[9] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
[10] -1 0 0xfa000000 - 0xfaffffff (0x1000000) MX[b](B)
[11] -1 0 0x0000dd00 - 0x0000dd7f (0x80) IX[b]
[12] -1 0 0x0000de00 - 0x0000deff (0x100) IX[b]
[13] -1 0 0x0000df00 - 0x0000dfff (0x100) IX[b]
[14] -1 0 0x0000f800 - 0x0000f80f (0x10) IX[b]
[15] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[16] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[17] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[18] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[19] -1 0 0x00000500 - 0x0000050f (0x10) IX[b]
[20] -1 0 0x0000fa00 - 0x0000fa0f (0x10) IX[b]
[21] -1 0 0x0000fb00 - 0x0000fb03 (0x4) IX[b]
[22] -1 0 0x0000fc00 - 0x0000fc07 (0x8) IX[b]
[23] -1 0 0x0000fd00 - 0x0000fd03 (0x4) IX[b]
[24] -1 0 0x0000fe00 - 0x0000fe07 (0x8) IX[b]
[25] -1 0 0x0000ef00 - 0x0000ef7f (0x80) IX[b](B)
(II) Inactive PCI resource ranges after removing overlaps:
[0] -1 0 0x00004100 - 0x000040ff (0x0) IX[b]O
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
(II) All system resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xfdefe000 - 0xfdefe7ff (0x800) MX[b]
[5] -1 0 0xfdeff000 - 0xfdeff0ff (0x100) MX[b]
[6] -1 0 0xfe02b000 - 0xfe02b3ff (0x400) MX[b]
[7] -1 0 0xfe02c000 - 0xfe02cfff (0x1000) MX[b]
[8] -1 0 0xfe02d000 - 0xfe02dfff (0x1000) MX[b]
[9] -1 0 0xfe02e000 - 0xfe02efff (0x1000) MX[b]
[10] -1 0 0xfe02f000 - 0xfe02f1ff (0x200) MX[b]
[11] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[b]O
[12] -1 0 0xfb000000 - 0xfbffffff (0x1000000) MX[b](B)
[13] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
[14] -1 0 0xfa000000 - 0xfaffffff (0x1000000) MX[b](B)
[15] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[16] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[17] -1 0 0x0000dd00 - 0x0000dd7f (0x80) IX[b]
[18] -1 0 0x0000de00 - 0x0000deff (0x100) IX[b]
[19] -1 0 0x0000df00 - 0x0000dfff (0x100) IX[b]
[20] -1 0 0x0000f800 - 0x0000f80f (0x10) IX[b]
[21] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[22] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[23] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[24] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[25] -1 0 0x00000500 - 0x0000050f (0x10) IX[b]
[26] -1 0 0x0000fa00 - 0x0000fa0f (0x10) IX[b]
[27] -1 0 0x0000fb00 - 0x0000fb03 (0x4) IX[b]
[28] -1 0 0x0000fc00 - 0x0000fc07 (0x8) IX[b]
[29] -1 0 0x0000fd00 - 0x0000fd03 (0x4) IX[b]
[30] -1 0 0x0000fe00 - 0x0000fe07 (0x8) IX[b]
[31] -1 0 0x0000ef00 - 0x0000ef7f (0x80) IX[b](B)
[32] -1 0 0x00004100 - 0x000040ff (0x0) IX[b]O
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "freetype" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri" will be loaded by default.
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Server Extension
(II) NVIDIA GLX Module 173.14.09 Thu Jun 5 00:07:40 PDT 2008
(II) Loading extension GLX
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "xtrap"
(II) Loading /usr/lib/xorg/modules/extensions//libxtrap.so
(II) Module xtrap: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension DEC-XTRAP
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension RECORD
(II) LoadModule: "freetype"
(II) Loading /usr/lib/xorg/modules/fonts//libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 1.4.2, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.5
(II) Loading font FreeType
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension XFree86-DRI
(II) LoadModule: "nvidia"
(II) Loading /usr/lib/xorg/modules/drivers//nvidia_drv.so
(II) Module nvidia: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Video Driver
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.3.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.0
(II) LoadModule: "kbd"
(II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.3.1
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.0
(II) NVIDIA dlloader X Driver 173.14.09 Wed Jun 4 23:47:25 PDT 2008
(II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
(II) Primary Device is: PCI 01:00:0
(--) Assigning device section with no busID to primary device
(--) Chipset NVIDIA GPU found
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.3
(II) Loading sub module "wfb"
(II) LoadModule: "wfb"
(II) Loading /usr/lib/xorg/modules//libwfb.so
(II) Module wfb: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.3
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"(II) Module "ramdac" already built-in
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xfdefe000 - 0xfdefe7ff (0x800) MX[b]
[5] -1 0 0xfdeff000 - 0xfdeff0ff (0x100) MX[b]
[6] -1 0 0xfe02b000 - 0xfe02b3ff (0x400) MX[b]
[7] -1 0 0xfe02c000 - 0xfe02cfff (0x1000) MX[b]
[8] -1 0 0xfe02d000 - 0xfe02dfff (0x1000) MX[b]
[9] -1 0 0xfe02e000 - 0xfe02efff (0x1000) MX[b]
[10] -1 0 0xfe02f000 - 0xfe02f1ff (0x200) MX[b]
[11] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[b]O
[12] -1 0 0xfb000000 - 0xfbffffff (0x1000000) MX[b](B)
[13] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
[14] -1 0 0xfa000000 - 0xfaffffff (0x1000000) MX[b](B)
[15] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[16] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[17] -1 0 0x0000dd00 - 0x0000dd7f (0x80) IX[b]
[18] -1 0 0x0000de00 - 0x0000deff (0x100) IX[b]
[19] -1 0 0x0000df00 - 0x0000dfff (0x100) IX[b]
[20] -1 0 0x0000f800 - 0x0000f80f (0x10) IX[b]
[21] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[22] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[23] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[24] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[25] -1 0 0x00000500 - 0x0000050f (0x10) IX[b]
[26] -1 0 0x0000fa00 - 0x0000fa0f (0x10) IX[b]
[27] -1 0 0x0000fb00 - 0x0000fb03 (0x4) IX[b]
[28] -1 0 0x0000fc00 - 0x0000fc07 (0x8) IX[b]
[29] -1 0 0x0000fd00 - 0x0000fd03 (0x4) IX[b]
[30] -1 0 0x0000fe00 - 0x0000fe07 (0x8) IX[b]
[31] -1 0 0x0000ef00 - 0x0000ef7f (0x80) IX[b](B)
[32] -1 0 0x00004100 - 0x000040ff (0x0) IX[b]O
(II) resource ranges after probing:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xfdefe000 - 0xfdefe7ff (0x800) MX[b]
[5] -1 0 0xfdeff000 - 0xfdeff0ff (0x100) MX[b]
[6] -1 0 0xfe02b000 - 0xfe02b3ff (0x400) MX[b]
[7] -1 0 0xfe02c000 - 0xfe02cfff (0x1000) MX[b]
[8] -1 0 0xfe02d000 - 0xfe02dfff (0x1000) MX[b]
[9] -1 0 0xfe02e000 - 0xfe02efff (0x1000) MX[b]
[10] -1 0 0xfe02f000 - 0xfe02f1ff (0x200) MX[b]
[11] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[b]O
[12] -1 0 0xfb000000 - 0xfbffffff (0x1000000) MX[b](B)
[13] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
[14] -1 0 0xfa000000 - 0xfaffffff (0x1000000) MX[b](B)
[15] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
[16] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
[17] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
[18] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[19] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[20] -1 0 0x0000dd00 - 0x0000dd7f (0x80) IX[b]
[21] -1 0 0x0000de00 - 0x0000deff (0x100) IX[b]
[22] -1 0 0x0000df00 - 0x0000dfff (0x100) IX[b]
[23] -1 0 0x0000f800 - 0x0000f80f (0x10) IX[b]
[24] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[25] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[26] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[27] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[28] -1 0 0x00000500 - 0x0000050f (0x10) IX[b]
[29] -1 0 0x0000fa00 - 0x0000fa0f (0x10) IX[b]
[30] -1 0 0x0000fb00 - 0x0000fb03 (0x4) IX[b]
[31] -1 0 0x0000fc00 - 0x0000fc07 (0x8) IX[b]
[32] -1 0 0x0000fd00 - 0x0000fd03 (0x4) IX[b]
[33] -1 0 0x0000fe00 - 0x0000fe07 (0x8) IX[b]
[34] -1 0 0x0000ef00 - 0x0000ef7f (0x80) IX[b](B)
[35] -1 0 0x00004100 - 0x000040ff (0x0) IX[b]O
[36] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
[37] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
(II) Setting vga for screen 0.
(**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
(==) NVIDIA(0): RGB weight 888
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(**) NVIDIA(0): Option "NoLogo" "true"
(**) NVIDIA(0): Option "TwinView" "1"
(**) NVIDIA(0): Option "TwinViewOrientation" "Clone"
(**) NVIDIA(0): Option "MetaModes" "DFP-0: 1920x1200 +0+0, DFP-1: 1920x1080_72 +0+0"
(**) NVIDIA(0): Option "TwinViewXineramaInfoOrder" "DFP-0"
(**) NVIDIA(0): Enabling RENDER acceleration
(**) NVIDIA(0): TwinView enabled
(II) NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
(II) NVIDIA(0): enabled.
(II) NVIDIA(0): NVIDIA GPU GeForce 7800 GTX (G70) at PCI:1:0:0 (GPU-0)
(--) NVIDIA(0): Memory: 262144 kBytes
(--) NVIDIA(0): VideoBIOS: 05.70.02.11.20
(II) NVIDIA(0): Detected PCI Express Link width: 16X
(--) NVIDIA(0): Interlaced video modes are supported on this GPU
(--) NVIDIA(0): Connected display device(s) on GeForce 7800 GTX at PCI:1:0:0:
(--) NVIDIA(0): BenQ G2400W (DFP-0)
(--) NVIDIA(0): PIONEER_PDP. (DFP-1)
(--) NVIDIA(0): BenQ G2400W (DFP-0): 310.0 MHz maximum pixel clock
(--) NVIDIA(0): BenQ G2400W (DFP-0): Internal Dual Link TMDS
(--) NVIDIA(0): PIONEER_PDP. (DFP-1): 155.0 MHz maximum pixel clock
(--) NVIDIA(0): PIONEER_PDP. (DFP-1): Internal Single Link TMDS
(II) NVIDIA(0): Display Devices found referenced in MetaMode: DFP-0, DFP-1
(II) NVIDIA(0): Assigned Display Devices: DFP-0, DFP-1
(II) NVIDIA(0): Validated modes:
(II) NVIDIA(0): "DFP-0:1920x1200+0+0,DFP-1:1920x1080_72+0+0"
(II) NVIDIA(0): Virtual screen size determined to be 1920 x 1200
(--) NVIDIA(0): DPI set to (93, 95); computed from "UseEdidDpi" X config
(--) NVIDIA(0): option
(==) NVIDIA(0): Enabling 32-bit ARGB GLX visuals.
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xfdefe000 - 0xfdefe7ff (0x800) MX[b]
[5] -1 0 0xfdeff000 - 0xfdeff0ff (0x100) MX[b]
[6] -1 0 0xfe02b000 - 0xfe02b3ff (0x400) MX[b]
[7] -1 0 0xfe02c000 - 0xfe02cfff (0x1000) MX[b]
[8] -1 0 0xfe02d000 - 0xfe02dfff (0x1000) MX[b]
[9] -1 0 0xfe02e000 - 0xfe02efff (0x1000) MX[b]
[10] -1 0 0xfe02f000 - 0xfe02f1ff (0x200) MX[b]
[11] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[b]O
[12] -1 0 0xfb000000 - 0xfbffffff (0x1000000) MX[b](B)
[13] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
[14] -1 0 0xfa000000 - 0xfaffffff (0x1000000) MX[b](B)
[15] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
[16] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
[17] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
[18] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[19] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[20] -1 0 0x0000dd00 - 0x0000dd7f (0x80) IX[b]
[21] -1 0 0x0000de00 - 0x0000deff (0x100) IX[b]
[22] -1 0 0x0000df00 - 0x0000dfff (0x100) IX[b]
[23] -1 0 0x0000f800 - 0x0000f80f (0x10) IX[b]
[24] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[25] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[26] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[27] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[28] -1 0 0x00000500 - 0x0000050f (0x10) IX[b]
[29] -1 0 0x0000fa00 - 0x0000fa0f (0x10) IX[b]
[30] -1 0 0x0000fb00 - 0x0000fb03 (0x4) IX[b]
[31] -1 0 0x0000fc00 - 0x0000fc07 (0x8) IX[b]
[32] -1 0 0x0000fd00 - 0x0000fd03 (0x4) IX[b]
[33] -1 0 0x0000fe00 - 0x0000fe07 (0x8) IX[b]
[34] -1 0 0x0000ef00 - 0x0000ef7f (0x80) IX[b](B)
[35] -1 0 0x00004100 - 0x000040ff (0x0) IX[b]O
[36] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
[37] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
(II) NVIDIA(0): Initialized GPU GART.
(II) NVIDIA(0): Unable to connect to the ACPI daemon; the ACPI daemon may not
(II) NVIDIA(0): be running or the "AcpidSocketPath" X configuration option
(II) NVIDIA(0): may not be set correctly. When the ACPI daemon is
(II) NVIDIA(0): available, the NVIDIA X driver can use it to receive ACPI
(II) NVIDIA(0): events. For details, please see the "ConnectToAcpid" and
(II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
(II) NVIDIA(0): Config Options in the README.
(II) NVIDIA(0): Setting mode "DFP-0:1920x1200+0+0,DFP-1:1920x1080_72+0+0"
(II) Loading extension NV-GLX
(II) NVIDIA(0): NVIDIA 3D Acceleration Architecture Initialized
(II) NVIDIA(0): Using the NVIDIA 2D acceleration architecture
(==) NVIDIA(0): Backing store disabled
(==) NVIDIA(0): Silken mouse enabled
(II) Loading extension NV-CONTROL
(==) RandR enabled
(II) Setting vga for screen 0.
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension XAccessControlExtension
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
(II) Initializing extension GLX
(**) Option "Protocol" "auto"
(**) Mouse0: Device: "/dev/input/mice"
(**) Mouse0: Protocol: "auto"
(**) Option "CorePointer"
(**) Mouse0: always reports core events
(**) Option "Device" "/dev/input/mice"
(**) Option "Emulate3Buttons" "yes"
(**) Mouse0: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5 6 7"
(**) Mouse0: ZAxisMapping: buttons 4, 5, 6 and 7
(**) Mouse0: Buttons: 11
(**) Mouse0: Sensitivity: 1
(**) Option "CoreKeyboard"
(**) Keyboard0: always reports core events
(**) Option "Protocol" "standard"
(**) Keyboard0: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Keyboard0: XkbRules: "xorg"
(**) Option "XkbModel" "trustda"
(**) Keyboard0: XkbModel: "trustda"
(**) Option "XkbLayout" "no"
(**) Keyboard0: XkbLayout: "no"
(**) Option "CustomKeycodes" "off"
(**) Keyboard0: CustomKeycodes disabled
(II) evaluating device (Keyboard0)
(II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD)
(II) evaluating device (Mouse0)
(II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE)
(--) Mouse0: PnP-detected protocol: "ExplorerPS/2"
(II) Mouse0: ps2EnableDataReporting: succeeded
Could not init font path element /usr/share/fonts/Type1, removing from list!
My xorg.conf looks like this now (I don't know what values to use for HorizSync and VertFresh on my TV, the ones that are in there I just made up ):
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 1.0 (buildmeister@builder63) Mon May 19 00:34:28 PDT 2008
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
RgbPath "/usr/share/X11/rgb"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "Module"
Load "glx"
Load "dbe"
Load "xtrap"
Load "extmod"
Load "record"
Load "freetype"
EndSection
Section "ServerFlags"
Option "Xinerama" "0"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
Option "XkbRules" "xorg"
Option "XkbModel" "trustda"
Option "XkbLayout" "no"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
Option "Emulate3Buttons" "yes"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "BenQ G2400W"
HorizSync 31.0 - 94.0
VertRefresh 50.0 - 85.0
EndSection
Section "Monitor"
Identifier "Monitor1"
VendorName "Unknown"
ModelName "PIONEER_PDP."
# HorizSync 15.0 - 80.0
# VertRefresh 23.0 - 60.0
EndSection
Section "Device"
Identifier "Card0"
Driver "nvidia"
VendorName "nVidia Corporation"
BoardName "G70 [GeForce 7800 GTX]"
BusID "PCI:1:0:0"
EndSection
Section "Device"
Identifier "Videocard0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce 7800 GTX"
EndSection
Section "Device"
Identifier "Videocard1"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce 7800 GTX"
BusID "PCI:1:0:0"
Screen 1
EndSection
Section "Screen"
Identifier "Screen0"
Device "Videocard0"
Monitor "Monitor0"
DefaultDepth 24
Option "NoLogo" "true"
Option "TwinViewOrientation" "Clone"
Option "TwinView" "1"
Option "TwinViewXineramaInfoOrder" "DFP-0"
Option "metamodes" "DFP-0: 1920x1200 +0+0, DFP-1: 1920x1080_72 +0+0"
SubSection "Display"
Depth 24
EndSubSection
EndSection
I read somewhere that the TV is supposed to be able to show 1080p in 72Hz. But when I try that it goes blank. Maybe it has something to do with the monitor being 1920x1200 and the TV 1920x1080. The monitor won't accept 1920x1080 as resolution so I guess that can only be done in Windows...

Does KDL60R510A have 60hz or 120hz refresh rate?

Similar Messages

Maybe you are looking for