Does LabVIEW 64 bit included in Developer suite ?

Does LabVIEW 64 bit included in Developer suite ?
George Zou
http://webspace.webring.com/people/og/gtoolbox
Solved!
Go to Solution.

The installer is not included in the Developer Suite Disks. But it uses the exact same license as the 32-bit. You can download the installers from NI's site.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

Similar Messages

LabVIEW Run-Time Engine in Developer Suite DVDs

Hi!
I need to install the Labview Run-Time Engine on a PC.
Where can I find it on my Developer Suite DVDs?
(I'd like to avoid downloading LV RTE from NI website)
Thanks in advance for any help,
Marco
Solved!
Go to Solution.

I'm pretty sure it is on the Device Drivers disk.
Using LabVIEW 2010SP1 and TestStand 4.5

Oracle Developer Suite 10g on Windows 7

Hi. Does anyone know if running Oracle Developer Suite 10g (10.1.2.0.2) on Windows 7 is supported?

This is a very common question in the Forum. Oracle Developer Suite (ODS) 10g R2 (with patchset 3: 10.1.3.0.2) is supported on Windows 7 32-bit. Last I checked, it was not supported on Windows 7 64-bit. Keep in mind, that this is just for the developer install of ODS. Version 10.1.2.0.2 is not supported, but it will work. Just follow the instructions installing on Windows Vista (search the forum - there are many posts on this topic as well).
The client application is supported on all versions of Windows (32 or 64 bit).
Hope this helps,
Craig B-)
If someone's response is helpful or correct, please mark it accordingly.

SPC Toolkit for LabVIEW - where is it in the labview (8.5) developer suite?

I started using SPC toolkit for a project in Labview 8.2.1, had no problem until I upgraded my system to labview 8.5. It said something like:
Some subvis are too old to be converted to 8.5.
I went to the Labview Developer suite CD album (labview 8.5), and couldn't find the SPC for LabVIEW, only for LabWindows / CVI. Then I went to NI's website and tried to find more about the toolkit, it seems this one had disappeared into thin air, along with the Enterprise connectivity toolkit (or Enterprice toolkit).
Does anybody know if NI stopped developing / supporting the SPC toolkit? Or if NI included it into other toolkit or product?
Thanks,
-Joe

Hi
sorry for a silly question, but I tried to locate the LabVIEW DSC Module 8.5 in my Professional development environment and I cannot find it.
Would you please tell me which disk is it on?
thanks
Pawel

Installation of developer suit 10g on windows 7 64-bit

Dear all,
I have successfully installed oracle 10g and developer suit 10g in my lappy which runs on windows 7 64-bit, I am able to launch form builder, create a new form and compile it. But when I runs the form the the internet explorer 8 crashes.
Please help

I am guessing that you are fairly new to the Oracle Forms product as you are not understanding the difference between the environment where a "form" is developed and the area where it can/will be run in a supported manner. Let me try to start from the beginning....
1. The Forms Builder 10.1.2 is NOT_ supported to be installed on Windows 7. I can technically be accomplished but is considered NOT supported by Oracle. So unless you have a good working knowledge of the Developer Suite product and the Win7 operating system and don't care about getting technical support from Oracle, I do not recommend attemting to install on Win7. If you choose to install on Win7, you are on your own even if you have a Support agreement. Supported platforms include Windows 2000, Win-XP, Vista (see note 559067.1), Solaris, Linux
If you feel like you need to have the Builder installed in an UNSUPPORTED environment, you can probably follow the instructions provided for installing on Vista as they will likely work for Win7. If you have access to My Oracle Support, take a look at this document: How to Install Developer Suite 10.1.2.3 on Windows Vista (Doc ID 559067.1)
Supported Operating Systems and other installation information can be found in the Installation Guide:
http://download.oracle.com/docs/cd/B25016_08/doc/dl/core/B16012_04/chap2.htm#i1007814
The only exception to the above is that we now support installing on Vista when following the note mentioned above.
2. You can "run" your form after it has been designed and compiled, on a Windows 7 machine. The form will run in a browser, using a JRE/JPI.

Want to install Oracle Developer Suite 10g R2 on Windows 7 (64-bit)

Hi,
I have windows 7 (64-bit) installed on my laptop. I want to install Oracle developer suite 10g R2 on this machine but when I run the Oracle Universal Installer, it gives me error stating "operating system version: must be 5.0, 5.1, 5.2. Actual 6.1 Failed<<<<
Exiting OUI.
Can anyone please help me to solve this problem.
Thanks in advance.
Regards

Developer Suite 10 is not certified or supported to be installed on Win7 (64bit). Although it can be done, you will have problems later if you manage to get it installed. If you really want to have it on your Win7 laptop, I encourage you to install "Windows XP Mode", which is part of Windows Virtual PC. This is free to licensed Win7 users (does not apply to Home edition). Refer to the following:
http://windows.microsoft.com/en-US/windows7/install-and-use-windows-xp-mode-in-windows-7

Oracle Developer Suite 32 Bit Version 10.1.2.0.2 Configuration issues

Hi,
I have installed Oracle Developer Suite 32 Bit Version 10.1.2.0.2 (Production) on windows xp sp-2 in a standalone machine.
The following Steps i have followed:
1.Oracle Developer Suite Installed
2.FORMS_PATH ,REPORTS_PATH and UI_ICON has been set in both Registry and default.env
My Application Folder setup is as follows :
D:\iAFRES\APPLICATION\FORMS
\MENUS
\REPORTS
\ICONS
Accordingly i have made the registry entries.
After doing all the above activities i am not able to show the icons ,run reports from web
.Please tell me what to do to resolve the issue and provide me the steps/documents for Application Deployment in Oracle 10g Developer Suite for Development purpose.
Thanks
Dhabas

hi
check out the following links.
How to create jar for icons
http://www.oracle.com/technology/products/forms/pdf/10g/frmwebshowdoc_rep.pdf
If its Correct/Helpful Please Mark it.Thanks
sarah
Edited by: S@R@h on Oct 29, 2009 1:23 AM

Labview 8.6 sound and measurement suite not installed properly under Vista 32 or 64 bit

I apologize if this isn't the correct place for this post but I'm in need of a solution. I recently purchased LabVIEW 8.6 Developer Suite with the Sound and Measurement Suite to create a NVH testing program at my company. I'm a newbe at Labview but I've been a programmer/computer hardware geek since the days of the TRS-80 model1. Here's my problem. I installed the package from the developers suite DVD's on my Windows XP professional desktop and everything is fine. I see the Sound and Vibration Measurement Suite listed under LabVIEW 8.6 in Measurement & Automation Explorer and the toolkit examples work in LabVIEW. When the laptop I purchased to do my actual work arrived with has Vista Business Edition 32 bit version installed I found the following problem. On that machine and two other Vista machines(one 64 bit and one 32 bit) that I tried, the installation doesn't register the Souind and Vibration Suite under LabVIEW 8.6 and they show the Sound and Vibration toolkit as not installed in the examples section. In the Windows control panel under National Instruments, all 4 machines show the Sound and Vibration Suite 6.0 as installed. I've tried to uninstall, reinstall, modify, from the control panel, and reinstall from the DVD's with no change in the outcome. I really need to get the laptop working as this is my actual development and test machine. Installing XP is not an option as the machine is newly purchased with a high end sound system and XP downgrade wasn't available. I'm out of ideas.
Solved!
Go to Solution.

I wanted to let close this as I got it working finally. This time I un-installed the Sound and Vibration entries from the LabVIEW control in Vista's uninstaller. Then re-installed and now it works. Before there were three entries, one for the suite, one for the runtime, and one for the toolkit. After removing all three and re-installing from the DVD, only the suite shows up, and all seems to be good.

How to install Oracle Developer Suite 10g on Windows 7 (64-bit)

Hi,
I have windows 7 (64-bit) installed on my laptop. I want to install Oracle developer suite 10g R2 on this machine but when I run the Oracle Universal Installer, it gives me error stating "operating system version: must be 5.0, 5.1, 5.2. Actual 6.1 Failed<<<<
Exiting OUI.
Can anyone please help me to solve this problem.
Thanks in advance.
Regards

Be aware that Developer Suite 10gR2 is not supported for use on Windows 7. Installing it on this platform may result in undesirable behavior.

Installation developer suit 10g on windows 7 64-bit

Dear all,
I have successfully installed oracle 10g and developer suit 10g in my lappy which runs on windows 7 64-bit, I am able to launch form builder, create a new form and compile it. But when I runs the form the the internet explorer 8 crashes.
Please help

Hi this is the Oracle Designer forum, you would be better off on the Forms forum

Is it possible to install oracle developer suite 10g in windows 7(64 bit), I have tried to install but failed so. Though, database 11g gets install in Windows 7. If possible, Kindly provide me the website link.

Is it possible to install oracle developer suite 10g in windows 7(64 bit), I have tried to install but failed so. Though, database 11g gets install in Windows 7.
If possible, Kindly provide me the website link.

Pl do not post duplicates
Is 1GB ram is enough for the installation of oracle developer suite 10g and database 11g??? And which one to install fi…
I want to install oracle database 11g and oracle developer suite 10g (latest) in my system. As i'm quite new to oracle ,…
Continue the discussions in your original threads

Developer suite running on windows 7 64 bit.

Will the latest Oracle developer suite (Forms/Reports builder) and OC4J environment run fine on a Windows 7 64 bit operating system?

Hello,
As far as i know Developer Suite 10gR2 is not supported on windows 7. But check the below link. It has been answered earlier. Maybe will be help you.
http://forums.oracle.com/forums/thread.jspa?messageID=4215028&
-Ammad

Problem installing oracle developer Suite 10g on window 7 64 bit

hi am in window 7 64-bit am trying to install my oracle developer suite am geting this error when installing
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be 5.0, 5.1 or 5.2 . Actual 6.1
Failed <<<<
Exiting Oracle Universal Installer, log for this session can be found at C:\User
s\10017134\AppData\Local\Temp\OraInstall2012-09-21_08-15-55AM\installActions2012
-09-21_08-15-55AM.log
Please press Enter to exit...
i downlload the software from
http://www.oracle.com/technetwork/developer-tools/developer-suite/downloads/101202winsoft-087370.html
my pc is window 7 professional service pack 1
64-bit operating system
now am geting this error
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be 5.0, 5.1 or 5.2 . Actual 5.1
Passed
Checking monitor: must be configured to display at least 256 colors . Actual
4294967296 Passed
Checking swap space: 0 MB available, 1535 MB required. Failed <<<<
Some requirement checks failed. You must fulfill these requirements before
continuing with the installation, at which time they will be rechecked.
Continue? (y/n) [n]
i try to right click mycomputer->advance system setting->system properties->advance->performance->setting->advance->virtual memory->change->virtual memory
Edited by: ADF007 on 2012/09/21 9:22 AM
Edited by: ADF007 on 2012/09/21 9:49 AM
Edited by: ADF007 on 2012/09/24 12:12 PM

hi my installation fail am geting this error
Starting to execute configuration assistants
Launched configuration assistant 'Oracle Net Configuration Assistant'
Tool type is: Recommended.
The command being spawned is: 'C:\DevSuite\jdk\jre\\bin/java.exe -Dsun.java2d.noddraw=true -Duser.dir=C:\DevSuite\bin -classpath ";C:\DevSuite\jdk\jre\\lib\rt.jar;C:\DevSuite\jlib\ldapjclnt10.jar;C:\DevSuite\jlib\ewt3.jar;C:\DevSuite\jlib\ewtcompat-3_3_15.jar;C:\DevSuite\network\jlib\NetCA.jar;C:\DevSuite\network\jlib\netcam.jar;C:\DevSuite\jlib\netcfg.jar;C:\DevSuite\jlib\help4.jar;C:\DevSuite\jlib\jewt4.jar;C:\DevSuite\jlib\oracle_ice.jar;C:\DevSuite\jlib\share.jar;C:\DevSuite\jlib\swingall-1_1_1.jar;C:\DevSuite\jdk\jre\\lib\i18n.jar;C:\DevSuite\jlib\srvmhas.jar;C:\DevSuite\jlib\srvm.jar;C:\DevSuite\network\tools" oracle.net.ca.NetCA /orahome C:\DevSuite /orahnam DevSuite /responseFile C:\DevSuite\network\install\netca_asinstall.rsp'
Start output from spawned process:
Parsing command line arguments:
Parameter "orahome" = C:\DevSuite
Parameter "orahnam" = DevSuite
Parameter "responsefile" = C:\DevSuite\network\install\netca_asinstall.rsp
Done parsing command line arguments.
The OUICA command is launched from C:\DevSuite\oui\bin\ouica.bat.-----------------------------------------------------------------------------
*** Starting OUICA ***
Oracle Home set to C:\DevSuite
Configuration directory is set to C:\DevSuite\cfgtoollogs. All xml files under the directory will be processed
Error:*** Alert: The assistant you are trying to stop is a "Recommended" assistant. Not successfully running any "Recommended" assistant means your system will not be correctly configured.
Do you wish to proceed? ***
User Selected: Cancel
The OUICA command is launched from C:\DevSuite\oui\bin\ouica.bat.-----------------------------------------------------------------------------
*** Starting OUICA ***
Oracle Home set to C:\DevSuite
Configuration directory is set to C:\DevSuite\cfgtoollogs. All xml files under the directory will be processed
Error:*** Alert: The assistant you are trying to stop is a "Recommended" assistant. Not successfully running any "Recommended" assistant means your system will not be correctly configured.
Do you wish to proceed? ***
User Selected: Yes/OK
End output from spawned process.
Configuration assistant "Oracle Net Configuration Assistant" was canceled.
Result code for launching of configuration assistant is: -1
Error:*** Alert: Some of the configuration assistants failed. It is strongly recommended that you retry the configuration assistants at this time. Not successfully running any "Recommended" assistants means your system will not be correctly configured. Select the failed assistants and click the 'Retry' button to retry them. ***
User Selected: Yes/OK
The following configuration assistants have not been successfully completed. These assistants must be completed for your product to be completely configured.
Execute file C:\DevSuite\cfgtoollogs/configToolCommands to re-run all skipped/failed configuration assistants.
echo Oracle Net Configuration Assistant
C:\DevSuite\jdk\jre\\bin/java.exe -Dsun.java2d.noddraw=true -Duser.dir=C:\DevSuite\bin -classpath ";C:\DevSuite\jdk\jre\\lib\rt.jar;C:\DevSuite\jlib\ldapjclnt10.jar;C:\DevSuite\jlib\ewt3.jar;C:\DevSuite\jlib\ewtcompat-3_3_15.jar;C:\DevSuite\network\jlib\NetCA.jar;C:\DevSuite\network\jlib\netcam.jar;C:\DevSuite\jlib\netcfg.jar;C:\DevSuite\jlib\help4.jar;C:\DevSuite\jlib\jewt4.jar;C:\DevSuite\jlib\oracle_ice.jar;C:\DevSuite\jlib\share.jar;C:\DevSuite\jlib\swingall-1_1_1.jar;C:\DevSuite\jdk\jre\\lib\i18n.jar;C:\DevSuite\jlib\srvmhas.jar;C:\DevSuite\jlib\srvm.jar;C:\DevSuite\network\tools" oracle.net.ca.NetCA /orahome C:\DevSuite /orahnam DevSuite /responseFile C:\DevSuite\network\install\netca_asinstall.rsp
Error:*** Alert: One or more "Recommended" configuration assistants have not completed successfully. Not successfully running any "Recommended" assistant means your system will not be correctly configured. A list of the assistants that need to be run is generated in the log of this session which is located at:
C:\Program Files (x86)\Oracle\Inventory\logs\installActions2012-09-21_10-14-35AM.log ***
Edited by: ADF007 on 2012/09/21 4:52 PM
Edited by: ADF007 on 2012/09/21 4:52 PM

Oracle 10g Developer suit in windows 7 Homebasic 64 bit

Dear All,
Can I install oracle 10g Developer suit in windows 7 Homebasic 64 bit.if possible.how to do.
please help me.
Thanks and Regards,
Fazil

Hello,
Please note that Developer Suite 10R2 is NOT certified(cannot be installed) for Windows 7 64-bit.
For an official statement check this note:
Forms / Reports Builder Certification on MS Windows 7 (Doc ID 1112213.1)
Developer suite 10gR2 is certified only on Windows 7 32-bit:
1292919.1 - Certification of Oracle Developer Suite 10g (10.1.2) on Windows 7 (32-bit)
You can install Developer suite 10R2 on Windows 64-bit in xp mode.
11gR2(11.1.2 version) is certified and can be installed on Windows 7 64-bit
Also IE9 is not certified with 10gR2.Check:
http://www.oracle.com/technetwork/developer-tools/forms/clientsod-forms10gr2-097528.html
Regards,
Alex
If someone's answer is helpful or correct please mark it accordingly.

Using sound VIs in labview 7.0 professional development suite

hello all
i hav a built a VI that aquires a thermocouple signal through my daq card....i intend to use sound VIs whenever my temp.exceeds set point..in short sound should b generated whenever temp.exceeds certain limit...... i hav used a "Beep" VI in my code....but no beep occured even if my temp.crossed set point.....is there any other platform required for using sound VIs??....i work on labview 7.0 professional development suite.
best regards
Solved!
Go to Solution.

hello
after i posted this msg i heard a beep sound on my pc speakers by placing only beep vi on block dig...and also with my code running properly.( that when my set point exceeded beep started ringing)......but after that i tried experimenting on many sound VIs.....n now when i place beep vi seperately on a block diagram it is not giving audio signal....same is happening with my code also....i cant here sound.....after successfully hearing beep sound on my pc speakers now wat suddenly happened with it??......would it b due to opening and closing many sound vis at a time??....like it happens in case of DAQ devices..that wen v use traditional daq devices n try using DAQmx devices after that they don't run unless v reset our traditional daq drivers.....so is it possible in case of sound vis also?...atleast a separate beep vi should run giving sound on speakers if i assume my code is wrong...
best regards

Does LabVIEW 64 bit included in Developer suite ?

Similar Messages

Maybe you are looking for