Does line in record in ster

Im looking to buy a Zen V for li've music tapingand am wondering if the line in records in Stereo.
Also- are the recording levels displayed on the screen?
thanks

I will have to wrestle it away from my daughter to check.
As I recall there is a level indicator for the voice recording (with built in mic), but I didn't think it showed that when doing line in recording.
But haven't done recording on it for awhile, when I was helping my daughter do it we always monitored the audio through the headphones while recording.
Will try to check tommorrow.

Similar Messages

Problems doing line-in record

I have a Creative Zen 4gb mp3 player and a Creative Zev V gb player, I have tried line-in recordings on both machines but instead, I have microphone recordings instead. In what ways can I rectify this problem? Usage, in Church.

Thanks for response sadly it only records/encodes to wma. Is there one that encodes to mp3
[email protected]

How to disable auto shut down when doing line-in recordi

I am using Zen V Plus 6gb to do li've line-in mic recording.
I experience creation of a few tacks when the recording ends.
When I asked Creative Tech, they said it is auto shut down when the voice recorded falls below audible level. Can I disable this?

If I got you right, it interrupts the recording when a period of seconds no signal more loud than a certain level is
on the line-in source? Right? Normally you could aplify anything, even white noise, but I don't get the point.
Are there any songs that have longer interruptions than 5 seconds according to this cd norm?

Zen V Plus hang during line in recording

I was doing line in recording. Then it hang there. The display did not change no matter which button I press. I can't even turn it off. I hold the power button for minute, the little thing just wouldn't go off. When?it runs out of battery, I connect it to my PC, it charges and returns to the same display no matter what. What can I do? Please help.

Hello Zxcv,
Welcome to Creative forums!
Have you tried doing a reset? Gently press the reset hole located on the left side (with the player facing up) using a pin or a paper clip. See if that hel
ps.

Creative zen micro line-in recordi

I read a review of the zen micro at CNET.com, and their short video clip tells me that the zen micro has line-in recording. However, nowhere does it state/mention that feature in the zen micro homepage, nor is it mentioned in any other site. I would just like to confirm that the zen micro doesn't have line-in recording...

Yep, the CNET.COM video review did mention about a line-in recording function. But maybe because that video was recorded way before the Zen Micro was actually launched, therefore there was a mix up in information. And so no, Creative Zen Micro does not have a line-in recording function. However, the Zen Neeon and Zen Nano Plus does have line-in recording if you're interested =)

Line In Recording Level Adjustment

I am recording from a tape recorder to the hard drive. I have done this a lot over the years. Suddenly I am no longer able to adjust the line in recording level. I have always before gone to Control Panel/Hardware and Sound/Sound (recording tab), Click Line In, then click on Levels. When I adjust the level, either lower or higher, it does nothing to change the sound level. Can aynone please tell me why this feature isn't working any longer on my computer. Could some other setting have gotten changed? Where should I look? Thanks!!!!

Have you tried to discuss it with mixer manufacturer?
I mean they know own product very well and have best experiences with it.
I presume they have tested it on different hardware platforms and different operating systems so I believe they are the right address where you can ask for help.
In control panel you have standard options for sound but maybe you need something specific for connected mixer.

Zen V Plus Line-In Record

I'm recording various shows on TV and Satellite radio by line-in audio recording. Can anyone tell me if the V Plus can charge and record line-in at the same time? If not, how long can it line-in record before the player shuts down? I have the Nano Plus and it's just too much of a drain with the AAA battery -- only recording about /2 hours before it shuts itself off.

it does not charge and record at the same time..
im not sure about the in-line recording battery life though..

Line In Recording Left/Right Channell

I hav an XFi-Titanium. I select the "Audio Record Mode". Then I record something with a Keyboard that's only on the Right-Channel. While I record something I hear nothing. When I stop the recording and play it afterwards, I hear the sound I recorded and its ony Right Channel like I wanted it to be. Line In is switched on and when I put the intrument on both channels I hear Music li've? while playing on the Instrument. If I put the Intrument on the Right Channel I hear nothing while playing li've. Only after recording I hear what I played on the Right Channel. My Question is why I don't hear the Right Channel while playing li've (When the Instrument only outputs a Right Channel sound) and when I record the same thing and then push play on the record programm I hear the right channel. So if I want to edit a multiple track song and for example put a Piano on the right channel I can't hear anything while playing on the Keyboard. I have to record it to hear what I played. So the right channel doesn't work li've. If I switch the Piano Sound to the Left Channel it has the same effect as putting the Piano Sound on both Channels. (I hear the Piano out of both Speakers)
Any Ideas why this isn't working li've, only working after recording?
gargamosch

)Re: Line In Recording Left/Right ChannelleI use Adobe Audition. I played arround with my settings and found out that to mute the right channnel or unmute it does not effect the li've-playback of line in. Only the left Channel (mute / unmute) has an effect. So if I put an Instrument on both channels, both channels go through the left channel while playing. If I put an Instrument only on the rigt Channel I hear nothing. If I put an Instrument only on the Left Channel I can hear it. So for li'veplayback only the left channel works. Recording uses two channels. I found out in the Audio-Creation Console of the Xfi- Titanium that, looking at the Playback Volume Meter, only the left channel shows something, while? the Record Volume Meter shows something on both channels. It seems that the Soundcard handles realtime-playback of line in and recording of line in different. Realtime - playback of line in seems to be mono while line in recording seems to be Stereo. Is there maybe a switch or a setting to get realtime playback of line in to stereo? Is it a driver problem and realtime Stereo isn't supported by line in on the X-fi?
gargamosh

Zen Micro- Line in recording????!

i've just seen on the cnet review site that the zen micro has line-in-recording and i've owned one for month but didnt know this!!
more importantly, if this is true, how comes i havent come accross it in the menues?
is it possible and how?

Proof that CNET is not a trustworthy source. They have their head stuck too far up Apple's butt to RTFM.
Heh
And no, it does not have line in recording.

Lin-in recording on Zen Photo

I want to know if the Zen Micro Photo will allow line-in recording from an exterior source .
thanks, Colin

Colin,
I'm afraid not. The Zen Micro Photo player does not have a Line In jack unlike player like the Zen Neeon.
Jason

Are their line in recording adapters?

the guitar amp app would technically have to create direct line IN to transmit sound from a guitar.. thus ipad 2 i would think should have direct line in recording capabilities. Does anyone know of specific adapters for this purpose? perhaps the actual guitar amp adapter would work with the right recording app?

You have the line in going into the correct jack, the 3/32 mini jack and not the /8 headphone jack right? Some people have mistakingly plugged the line in into the headphone jack thinking that is how they recorded.

Export Excel Data only causes blank line between 2 lines of records

Hi,
I wrote a complete winform application using CR2008.
For information :
C# Framework 3.5
Windows XP SP2 or Windows Server 2003 SP1
CR2008 SP1
Application allow to preview report. In the preview window (CR activx) there is a "letter icon" to export report in several format.
-RPT
-PDF
-DOC
-XSL
-XSL Data only
When I export with "Excel Data only" format, I always have a blank line between 2 lines of records in Excel.
Is there a way to supress them from VS2008 ?
Thanks a lot for your reply,

Hello, Jonik;
Do you see the same blank lines when you export to Excel Data only in the Crystal Reports designer?
Elaine

Product Request: Line-In Recording for Micro (or a USB Doo-D

I think the Micro would really benefit from that level of functionality.
There are two ways it might work, but I don't know the technical sides...
: the headphone jack is not just a source or dread; it's also Remote-Ready. This may point to additional input uses for the hardware, if there is the firmware to exploit it.
2: a line-in accessory could certainly be attached through the mini-USB jack. Again, the firmware would have to support it, but I would certainly pay for a doo-dad that let me record lectures and whatnot with an external microphone, not to mention the whole "record from a CD player" aspect, great for my numerous partially-scratched disks that my computer refuses to read...
Plus, a USB doo-dad would trans-product - they could be used with all the other players that use the mini-USB jack to transfer data. Anyway, a feature like that is too good to only feature in the N200.

I've just found a Yahoo! Group that discusses audio recording with Creative's Nomad Jukebox 3:
http://grou
ps.
yahoo.com/group/njb3tapers
So that's more proof that there's an interest in that. Maybe not as widespread, but I think one of the reasons the NJB3 was as successful was because of its recording capabilities, because as simple MP3 player it was too big, so it was the extra features such as line-in recording that made it stand up.

How to notify in case SQL query(JDBC sender adapter) does not fetch records

hi,
How can we notify(by alerts or something) in case SQL query(JDBC sender adapter) does not fetch records? In channels logs it only says processing started & finished(no message is created for same).
Thanks,
Mayank

Hi,
1 ) What is exact audit log message ?
2) Try fetching the count in SQL statement if there are any valid records it will give the count.
May for testing you can use <TEST> in update statement.
3) Have you used taskTimeout parameter ?
4) Are multiple channels polling on same table ?
regards
Ganga

Whenever the idoc triggers its contains two lines of record,

Hi Experts,
In my IDOC INFREC.INFRECMASS01 has two segments E1E1NAM and E1E1NEM.Both the Segments has some fields.In that E1E1NEM segment-WERKS contains two valuse, First its coming with 1010. Second its coming with 1014.So its Second line.So whenever the idoc triggers its contains two lines of record, Each i need to update in JDBC At same time.How? Even i tried SplitByValue with ValueChange its not working.... please help....
Advance Thanks
Arun

We are working on IDOC to JDBC scenario.
In my IDOC INFREC.INFRECMASS01 has one segment E1E1NAM( parent segment), inside this parent segment we have one child segment E1E1NEM containing two lines. On the basis of one field WERKS, the child segments should get repeated in the target but in the target side we are getting only one of the values of WERKS .
We have used SPLIT BY VALUE(each value) on WERKS but still only one of the values are coming on the target side .
We are attaching the source xml and the target xml generated from RWB
*Source XML from SXMBMONI :*_
<?xml version="1.0" encoding="UTF-8" ?>
- <INFRECMASS01>
- <IDOC BEGIN="1">
+ <EDI_DC40 SEGMENT="1">
- <E1EINAM SEGMENT="1">
<MSGFN>005</MSGFN>
<INFNR>5300000074</INFNR>
<MATNR>000000000000103260</MATNR>
<LIFNR>0000009000</LIFNR>
<ERDAT>20091116</ERDAT>
<ERNAM>KAPIL</ERNAM>
<MEINS>PK</MEINS>
<UMREZ>10</UMREZ>
<UMREN>1</UMREN>
<TELF1>011-64612814</TELF1>
<MAHN1>0</MAHN1>
<MAHN2>0</MAHN2>
<MAHN3>0</MAHN3>
<URZDT>00000000</URZDT>
<URZLA>IN</URZLA>
<LMEIN>ST</LMEIN>
<REGIO>30</REGIO>
<VABME>1</VABME>
<LTSSF>00000</LTSSF>
<LIFAB>00000000</LIFAB>
<LIFBI>00000000</LIFBI>
<ANZPU>0.000</ANZPU>
<RELIF>X</RELIF>
- <E1EINEM SEGMENT="1">
<MSGFN>005</MSGFN>
<EKORG>1000</EKORG>
<ESOKZ>0</ESOKZ>
<WERKS>1010</WERKS>
<ERDAT>20091116</ERDAT>
<ERNAM>KAPIL</ERNAM>
<EKGRP>101</EKGRP>
<WAERS>INR</WAERS>
<MINBM>0.000</MINBM>
<NORBM>1.000</NORBM>
<APLFZ>0</APLFZ>
<UEBTO>0.0</UEBTO>
<UNTTO>0.0</UNTTO>
<ANGDT>00000000</ANGDT>
<NETPR>0.00</NETPR>
<PEINH>1</PEINH>
<BPRME>PK</BPRME>
<PRDAT>00000000</PRDAT>
<BPUMZ>1</BPUMZ>
<BPUMN>1</BPUMN>
<WEBRE>X</WEBRE>
<EFFPR>0.00</EFFPR>
<MHDRZ>2</MHDRZ>
<BSTMA>0.000</BSTMA>
<STAGING_TIME>0</STAGING_TIME>
</E1EINEM>
- <E1EINEM SEGMENT="1">
<MSGFN>005</MSGFN>
<EKORG>1000</EKORG>
<ESOKZ>0</ESOKZ>
<WERKS>1014</WERKS>
<ERDAT>20091116</ERDAT>
<ERNAM>KAPIL</ERNAM>
<EKGRP>101</EKGRP>
<WAERS>INR</WAERS>
<MINBM>0.000</MINBM>
<NORBM>1.000</NORBM>
<APLFZ>0</APLFZ>
<UEBTO>0.0</UEBTO>
<UNTTO>0.0</UNTTO>
<ANGDT>00000000</ANGDT>
<NETPR>0.00</NETPR>
<PEINH>1</PEINH>
<BPRME>PK</BPRME>
<PRDAT>00000000</PRDAT>
<BPUMZ>1</BPUMZ>
<BPUMN>1</BPUMN>
<WEBRE>X</WEBRE>
<EFFPR>0.00</EFFPR>
<MHDRZ>2</MHDRZ>
<BSTMA>0.000</BSTMA>
<STAGING_TIME>0</STAGING_TIME>
</E1EINEM>
</E1EINAM>
</IDOC>
</INFRECMASS01>
TARGET XML FROM RWB:
<?xml version="1.0" encoding="UTF-8" ?>
- <ns0:MT_IB_VENDORISL xmlns:ns0="http://VENDORITEMSITELINK_NS">
- <STATEMENTNAME>
- <si_sku_vendor_link ACTION="INSERT">
- <ACCESS>
<Sku_Code>000000000000103260</Sku_Code>
<Location_Code>1010</Location_Code>
<Vendor_Code>0000009000</Vendor_Code>
<Lead_Time>0</Lead_Time>
<Pref_Vendor_Flag>Y</Pref_Vendor_Flag>
<Active_Ind>Y</Active_Ind>
</ACCESS>
</si_sku_vendor_link>
</STATEMENTNAME>
</ns0:MT_IB_VENDORISL>

Does line in record in ster

Similar Messages

Maybe you are looking for