Does LMS 3.2 still use need rcp enabled on our devices?

LMS 3.2 running on Unix in a master-slave configuration.
Our security team is asking us why we need rcp (port 514) enabled on our routers.
It's becuase of the following standard commands;
ip rcmd rcp-enable
ip rcmd remote-host cwuser <ip address of LMS> cwuser enable
I believe these commands helped with the archiving of the device configurations? I know it's been a standard command of ours for years, but am not sure if it is still needed?
Any information you can provide would help.
Thanks,

RCP is optional. If you would rather use TFTP, SSH, SCP, etc. you can disable RCP. By default, LMS/RME will use TFTP, TELNET, and SSH for config archive.

Similar Messages

Does the iPhone 6 support use of bluetooth enabled mouse?

Does the iPhone 6 support use of bluetooth enabled mouse?

I'd really like to think so as well, who's using a tempered glass for the screen an a similar film/glass for the backplate that can shed some realistic light on this query? help is much appreciated.
people tend to get a bit hysterical when they see my uncased 4s, and yet after 2.5 it is still in better shape than everyone else's.....so if that's gonna be the case with the 6 plus I'll be satisfied.
I understand the 6 (and 6 plus) have a cureved screen and that most glass protectors are a bit dorky and dont go all the way to the end. would ones that go all the way be more fragile and by that endanger the screen or is full coverage better? is there a suggested tempered glass protector for the 6 plus?

My ipad device does not come up on itunes, need help fast:/, my ipad device does not come up on itunes, need help fast:/

my ipad device does not come up on itunes, need help fast:/, my ipad device does not come up on itunes, need help fast:/

Hi, Nancy.
Thank you for visiting Apple Support Communities.
Here are the steps that I would recommend going through when experiencing an error that begins with 0xE.
iOS: Unknown error containing '0xE' when connecting to a Windows PC
http://support.apple.com/kb/ts3221
Cheers,
Jason H.

Hi. I have an iPhone and a Mac,and my sister has iPad2 and iPhone also.we both use a pc to sync our devices and use one App ID in our devices.but we want to use personal iCloud to achieve our personal files.how can I use iCloud in this situation?

Hi. I have an iPhone and a Mac,and my sister has iPad2 and iPhone also.we both use a pc to sync our devices and use one App ID in our devices.but we want to use personal iCloud to achieve our personal files.how can I use iCloud in this situation?

You will need to setup a new Apple ID for your sister. You have to have an Apple ID and iDevice connected and using that account to get an iCloud account.

Does new 2012 mac pro ssd need trim enabler

does new 2012 mac pro ssd need trim enabler

Welcome to the Apple Support Communities
If they need TRIM (I think that the flash storage included with the MacBook Pro does not need TRIM), Apple turns it on by default with the MacBook.
However, there are some people that doesn't recommend TRIM because it may hurt (rather than improve) performance > http://blog.macsales.com/11051-to-trim-or-not-to-trim-owc-has-the-answer

I have java. It does not work w/firefox. Need to enable BUT it does not show up in firefox under tools-option-content. I need to "enable" but can't when does not appear. How get java to play with firefox?

Firefox version 3.6.12
Java - I believe 6 update 22 something like that - have verified have most up-to-date available.
I am running on windows xp with upgrade 2. (I can not upgrade to 3 without crashing my system. Not even with hp's "fix" unless they've licked that calf over again.)
Restarting computer has not solved either.

Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
*Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
*Tools > Options > Privacy > Cookies: "Show Cookies"

Will applications need to enable Lion's Auto Save feature?

After accidentally stepping on the power strip today and losing about a half hour of work (I know I know, save, save, save) I am chomping at the bit to get Lion with Auto Save. As a professional writer, if that was the only new feature it would be worth the upgrade for me. But at $30? Biggest no brainer ever. That is a truly revolutionary feature for me.
Does anybody know if applications will need to enable or program in the Auto Save functionality or if it will work with existing applications out of the box?

Apple's system wide, "you don't have to do anything but do your work" Auto Save is to Word's auto save like Ragu is to my grandpa's homemade gravy.
No, Apple didn't invent auto save (neither did Microsoft, BTW) just like they didn't invent a lot of other things they do. However, just like Time Machine did for incremental backups, Auto Save and Versions will take this concept to new levels of elegance and usability.
The fact that it's system wide and works seamlessly with Versions so that I can scroll back and easily grab previous versions of my document is what makes this revolutionary.
Linc: I don't doubt you at all (I'm sure you're right), I just hope you're wrong. Either way, it is a feature well worth even the previous $130 upgrade price, let alone the measly $30 price tag of Lion.

I still use Aperture 2.1.4. I need to export an image file with a CMYK profile. Whereas a generic CMYK profile is listed in ColorSync Utility, it does not appear on the list of profiles in the edit portion of the export preset dialogue. Help?

I still use Aperture 2.1.4. I need to export an image file with a CMYK profile. Whereas a generic CMYK profile is listed in ColorSync Utility, it does not appear on the list of profiles in the edit portion of the export preset dialogue. Help? Is there some way to add the CMYK profile to the list of choices that are available in the export preset dialogue such that I can choose it?

leonieDF
Thanks for your response. My profiles are located within color sync utility as you can see here:
These profiles do not respond to clicking and dragging. Since they are all in one place, more or less, I'm reluctant to make further attempts to relocate them. Accessing the CMYK profile is the first difficult experience I've encountered with this arrangement. I have never needed the CMYK profile until recently, and that need has now past. However, it remains a mystery to me as to why it does not appear with all the others on the menu of export choices in Aperture 2, or on the menu of profile assignment choices in the Preview application (where again all the other profiles are listed as choices). I'm beginning to think my current set up will permit me to view an image that was created in CMYK space, but does not easily assign, or convert to that space. I don't face these restrictions with all the others, so it remains a curious circumstance for me. I anticipate upgrading my computer and software in the near future which might alleviate this issue altogether. Again, many thanks for your attention to this matter. The reach of this community is astounding.

Does DPM 2012 R2 still needs DataSourceGroups.xml and MaxAllowedParallelBackups key when using Hyper-V VSS Software Writer to backup Server 2012 R2 Cluster

Hi,
Does DPM 2012 R2 still needs DataSourceGroups.xml and MaxAllowedParallelBackups key when using Hyper-V VSS Software Writer to backup Server 2012 R2 Hyper-V Cluster with CSV's? Can't find a clear answer somewhere.
Thanx for helping me out.
DJITS.

Configure CSV backups
If you are running Hyper-V on Windows Server 2008 R2 and you’re backing up multiple clusters with DPM, you need to ensure that only one backup uses the same CSV at any one time. To do this, follow the instructions in
Serialize virtual machine backups.
If you’re using software VSS with Hyper-V on Windows Server 2008 R2, do the following
Serialize virtual machine backups per node
Serialize virtual machine backups per CSV LUN
Have a nice day !!!

Why does creative cloud is still asking serial number after i purchase and it wouldn't let me use it anymore because my trial is over need help NOW PLZ

why does creative cloud is still asking serial number after i purchase and it wouldn't let me use it anymore because my trial is over need help NOW PLZ

Hi There,
Kindly try the following steps:
Sign out and sign in to Creative Cloud app: Sign out, Sign in | Creative Cloud Desktop app
Sign in, activation, or connection errors | CS5.5 and later
Thanks.
Atul Saini

Do I need to assign a name to both my iphones? I just got an iPhone 5, BUT I still use my iPhone 3GS as a camera

Do I need assign a name to both my iphones? I just got an iPhone 5, BUT I still use my iPhone 3GS as a camera & iPod, and will need to back it up and sync it occassionally, I have NOT named either phone yet, they are recognized only as "owner's iphone".
NOTE: I HAVE A P.C.
Is there any danger of not naming them, and itunes confusing them, and gathering wrong backup info, etc.
ALSO....Does turning the volume all the way down silence all phone sounds? In other words before I sleep, do I need to click that little switch on the left side of the phone to achieve complete silence, if so, is there an INTERNAL way to do this so I don't have to push my finger in there through my otter box case to turn it off.?
I have AT&T on my iPhone 5, and I was wondering if there was a way to save my voicemails permanently somewhere, because they get erased by AT&T every 14 days.
ALSO.....How do I manage my 20,000 photos, in "my pictures" in my PC, shall I have one folder which has ALL of photos ALL OF THEM.........In sequence and then create dozens of other folders by event, catagory, etc. I get SO CONFUSED on what to do with my photos, what is THE BEST WAY to keep them organized.
Thank You Very Much,
APPLE DREAMER - PC CLINGER

http://support.apple.com/kb/HT3965

I'm still using 'good ole' Appleworks 6 on Snow Leopard. I'v heard that Maverick does NOT support Appleworks 6. Is this true?? Are my 20 years of Appleworks files now useless?6

I'm still using 'good ole' Appleworks 6 on Snow Leopard. I'v heard that Maverick does NOT support Appleworks 6. Is this true?? Are my 20 years of Appleworks files now useless?

Boomba29 wrote:
I'm still using 'good ole' Appleworks 6 on Snow Leopard. I'v heard that Maverick does NOT support Appleworks 6. Is this true?? Are my 20 years of Appleworks files now useless?
Word Processing documents can be opened directly in Pages 4 (AppleWorks 6 only) but this is no longer available from Apple - the new Pages 5 (Mavericks required) does not open AppleWorks documents. (The older version is contained in the iWork '09 box set which may still be available from Amazon and other independent retailers.) Panergy Software's docXConverter v3.2 ($19.95) can convert Appleworks 5 and 6 Word Processing documents to RTF (though it has been reported that it can only handle documents which contain only text, not those which include images or frames). The latest version of the free LibreOffice has announced that it can open AppleWorks 6 Word Processing documents and an ability to open ClarisWorks documents has been reported: it does appear to be able to handle at least some embedded images.
Draw Documents can be opened directly only in EazyDraw (the more expensive version from their website, not the cheaper one from the Mac App Store, and you will need v4.0 'Retro' not the most recent version) or Intaglio (though this appears not to be able to handle very complex drawings). LibreOffice will open simple Draw documents but I found it very unreliable with complex ones.
Spreadsheets can be opened directly only in the older versions of Numbers - the new version for Mavericks will not do this. The old version is no longer available from Apple. (Again, the older version is contained in the iWork '09 box set which may still be available from Amazon and other independent retailers.)
Presentations can be opened directly only in the older versions Keynote; again, the new version for Mavericks will not do this. The old version is no longer available from Apple. (The older version is contained in the iWork '09 box set which may still be available from Amazon and other independent retailers.)
Nothing will open Database documents. You would need to export the data as ASCII and import it into another database program; you will lose your formatting and calculations will come over as the result, not the calculation.
This article examines 'abandoning Appleworks' in detail:
http://wilmut.uk/aw

HT201272 I need to reload some songs as the backup did not include all. Following this article. Problem is that download icon does not appear anywhere. Using iTunes 11.01. Anybody seen this before?

I need to reload some songs as the backup did not include all. Following this article. Problem is that download icon does not appear anywhere. Using iTunes 11.01. Anybody seen this before?

Steve!
There is a lot more "meat" in this .
I purchased all out of Denmark. My HD crashed and I reload it all. While doing this I had to install new iTunes, - this is the newest version 10.xx. The old version was probbaly 9.xx (cant remember). So the library files are from an old version, - but it does not look like creating a problem. I am now in Sweden, so iTunes was installed in Sweden, and I try to re-download my missing songs while being here in Sweden. However, - I belive I am connected to iTunes store in Denmark. ... (it takes 2 smileys for this, - if you get as far as to here and still have an overview.)

I just purchased a MacBookPro after having a MacBook. I have ILife, IWorks and Office for Mac. How do I get those programs on to my MacBook Pro? I will still use my MacBook at work so I need those programs to remain on it as well.

I just purchased a MacBookPro after having a MacBook. I have ILife, IWorks and Office for Mac. How do I get those programs on to my MacBook Pro? I will still use my MacBook at work so I need those programs to remain on it as well.

You need a Firewire cable to run between the two Macs. Using Utility>Migration Assistant running on your new MacBook Pro, transfer what you want (with all the preferences and such) from your MacBook to your MBP. Here's more info from Apple.
You might have an issue with the Serial number for Office, but hopefully you have that around.
Hope this helps.

I have changed my icloud email in my iphone but in macbook still using old email. I tried to delete the old email in macbook but it requires password and it does not accept the old password for the old email anymore. How do I remove this old email?

I have changed my icloud email in my iphone but in macbook still using old email. I tried to delete the old email in macbook but it requires password and it does not accept the old password for the old email anymore. How do I remove this old email?

Hello farahani hairon nizar,
If your Apple ID was changed from your old account, you may have to change it back to your old account to be able to sign out and then change it back after that is done. Take a look at the article below for more information.
If you're asked for the password to your previous Apple ID when signing out of iCloud
http://support.apple.com/en-us/HT203828
Regards,
-Norm G.

Does LMS 3.2 still use need rcp enabled on our devices?

Similar Messages

Maybe you are looking for