Does Lync Server 2013 support Hyper-V Replica
I can’t find a definitive answer on this. I plan on either having 2 Standard Edition Lync 2013 Servers, or use Hyper-V replica for disaster recovery.
I’m expecting some down time during the failover. Looking for the simplest and most cost effective solution.
Hi,
It is not supported. Here are similar cases:
http://social.technet.microsoft.com/Forums/windows/en-US/ce08024b-6516-44b6-9fb0-76e9c02b1da2/does-lync-2013-support-hyperv-replica?forum=lyncdeploy
http://social.technet.microsoft.com/Forums/windows/en-US/d5882edc-e25c-4d09-9079-d6f8e90d4035/does-lync-2013-support-hyperv-replica?forum=winserverhyperv
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.
Similar Messages
-
Does Lync server 2013 send dtmf tones
I am aware that Lync 2010 does not send dtmf tones while on a conference call (outbound)
"AVMCU does not support DTMF in Lync 2010 Server or Office Communications Server 2007 R2"
http://support.microsoft.com/kb/2254369
Can someone verify for me if Lync 2013 does? Or if Skype for business will?
We currently use a translator service on outbound, 3-way calls and so using the workaround in 2010 (calling the party that needs the dtmf tones first and then conferencing in the other party) is not ideal nor is it always feasible.
I have been unable to find any information either confirming or denying whether the limitation still exists in 2013/Skype for Business
Thanks in AdvanceOut of curiosity, because I haven't tried this, I started a conference call with Lync 2013, then made an outbound call from the conference to invite a 1-800 number that has me press numbers to navigate a menu. Pressing the numbers from Lync seemed
to do absolutely nothing. Pressing the numbers from a cell phone connected to the same conference were actually sent and I was able to navigate using that method. Seems like it's still a limitation, perhaps so that the DTMF tones are not sent
to all participants in the call unnecessarily.
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer".
SWC Unified Communications
This forum post is based upon my personal experience and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs. -
What are the supported feature for LYNC Server 2013 WITHOUT Telephony
Hi
I have a new customer who is asking for LYNC Server 2013 without to use VoIP Support.
The would like to use the LYNC-SKYPE connectivity but without LYNC calls.
Most of their internal users are using SKYPE.
The Question is now, what Features are possible for example:
FEATURE-LIST
See other’s presence
Manage own presence
See presence in Office
Contact management
Contact card
PC-PC and multiparty IM
PC-PC and multiparty file transfer
Persistent Chat
PC-to-PC computer audio calling
PC-to-PC computer video calling
PC-to-PC presence display, IM, audio, and video with Skype users
But what of the above feature list is possible without using VoIP ??
And how works that LYNC WebApp Client without VoIP? Is it possible to route Audio/Video over the internet by using that LYNC WebApp Client in LYNC 2013??
Thanks in advance ;-)
Kind regards
Michael
Kind regards Michael DamaschkeAll of that is possible without PSTN connectivity or the plus cal.
When you say VoIP, do you mean audio chatting over TCP/IP in the purest form, or do you mean specifically telephone calls?
Technially PC-to-PC computer audio calling is VoIP, or voice over IP, but if you're talking about connecting it to a PBX or the phone network, you don't need it for any of the above. It works wonderfully and is quite a bit cheaper without it due to
fact that you won't need to license the plus cal for enterprise voice or the Exchange enterprise cal for voicemail.
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer".
SWC Unified Communications -
How can I connect the phone network to LYNC Server 2013?
Greetings,
We have a working implementation of Lync Server 2013 (pc to pc), our objective is to connect lync to our phone central, receive and send calls from lync clients (pc, phone, etc), basically enterprise voice services.
I would like to know the following:
Hardware that I need for this beside the server.
Extra configurations that must be done.
If you could recommend me the hardware needed it would be helpful.You'll need a gateway typically. You can find a list of qualified IP gateways here: http://technet.microsoft.com/en-us/office/dn788945.aspx
I typically lean towards the AudioCodes Mediant line, though many here love Sonus as well. You'll need to pick a method to connect to your PBX before you begin, such as via a T1/E1 trunk, FXO ports, or a SIP trunk depending on what your PBX will
support.
You'll need to configure the PBX to route calls through the T1 towards Lync and vice versa. You'll also need to configure the gateway itself, so I'd go with a consultancy with experience here or purchase remote implementation support from the hardware
manufacturer.
On the Lync side, you'll need to configure dial plans, voice policies, usages, and routes:
http://technet.microsoft.com/en-us/library/gg398272.aspx
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer".
SWC Unified Communications
This forum post is based upon my personal experience and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs. -
What port number for Desktop Sharing using in Lync Server 2013 and Lync Online
Dear All,
My environment using Lync Server 2013 and Lync online on Office 365. I don't want my user using Desktop Sharing feature. then I need to know what port number for Desktop Sharing using in Lync Server 2013 and Lync Online.
I will deny this port on personal firewall each client.
Thank you for your advise.Hi,
I'm not sure you'd be able to do this with ports without impacting other application sharing features such as Q&A, Whiteboard, Poll etc - I'm pretty sure they all come under the same umbrella of ClientAppSharing.
Ordinarily you would create or modify your conferencing policy to restrict sharing to single programs only using a cmdlet similar to below;
Set-CsConferencingPolicy -Identity "Global" -EnableAppDesktopSharing SingleApplication
This would disable desktop sharing but enable users to continue sharing other single programs. If you want to remove that functionality too, then replace the 'SingleApplication' parameter with 'None'. Then users won't be able to share any programs either.
This is the correct way to do it as the icons will be greyed out for the users. Doing it your way, they would still be able to click them, and it would throw an error - this will lead to a lot more support calls and people assuming a service is broken.
I hope that helps some.
Kind regards
Ben -
Backing Up and Restoring Lync Server 2013/OCS 2007 R2 Co-existence Environment
Hello
I am seeking tips on how to build a replica of a Lync 2013/OCS 2007 R2 production pilot Co-existence environment in a test lab.
Lync 2013 is a standard Edition Pool
OCS 2007 R2 is an Enterprise Pool
Here is what I think...Is this feasible ? appreciate any other idea
1. Get Active Directory to Test Environment
For OCS 2007 R2 Servers
2. Use LCScmd on OCS 2007 R2 Servers to backup Global\Pool\Computer specific settings
3. Backup OCS 2007 R2 on Backend SQL Database
4. Restore data from steps 2 and 3 to equivalent servers created and prepared in test environment
For Lync 2013 SE Servers
5. Use the Lync 2013 Backup and Restore Process to bring up Lync Server 2013 into the test environment
http://technet.microsoft.com/en-us/library/hh202192.aspx
DavidThat should do it, as you said you'll need Active Directory as well so these accounts line up with something.
It may be easiest to restore into your virtual environment using virtual snapshots or Windows backups and fixing any corruption that may have occurred by restoring what you've backed up.
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer".
SWC Unified Communications -
Team,
Unable to start FE service on one of the FE server, 2 Enterprise lync 2013 pool one FE in each pool, only following error in event vrw,
Log Name: Lync Server
Source: LS Server
Date: 12/30/2013 12:10:55 PM
Event ID: 12290
Task Category: (1000)
Level: Error
Keywords: Classic
User: N/A
Computer: ACS465-BH102.me.ykgw.net
Description:
The evaluation period has expired.
The evaluation period for Microsoft Lync Server 2013 has expired. Please upgrade from the evaluation version to the fully licensed version of the product. Look at help for Setup.exe to learn how to upgrade from evaluation version to the licensed version.
Cause: The evaluation period for Microsoft Lync Server 2013 has expired.
Resolution:
Please upgrade from the evaluation version to the licensed version of the product. Look at help for Setup.exe to learn how to upgrade from evaluation version to the licensed version.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="LS Server" />
<EventID Qualifiers="50152">12290</EventID>
<Level>2</Level>
<Task>1000</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2013-12-30T09:10:55.000000000Z" />
<EventRecordID>73953</EventRecordID>
<Channel>Lync Server</Channel>
<Computer>ACS465-BH102.me.ykgw.net</Computer>
<Security />
</System>
<EventData>
</EventData>
</Event>
Log Name: System
Source: Schannel
Date: 12/30/2013 12:13:36 PM
Event ID: 36888
Task Category: None
Level: Error
Keywords:
User: SYSTEM
Computer: ACS465-BH102.me.ykgw.net
Description:
The following fatal alert was generated: 10. The internal error state is 1203.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Schannel" Guid="{1F678132-5938-4686-9FDC-C8FF68F15C85}" />
<EventID>36888</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x8000000000000000</Keywords>
<TimeCreated SystemTime="2013-12-30T09:13:36.779033200Z" />
<EventRecordID>83985</EventRecordID>
<Correlation />
<Execution ProcessID="556" ThreadID="3668" />
<Channel>System</Channel>
<Computer>ACS465-BH102.me.ykgw.net</Computer>
<Security UserID="S-1-5-18" />
</System>
<EventData>
<Data Name="AlertDesc">10</Data>
<Data Name="ErrorState">1203</Data>
</EventData>
</Event>
Server is already on Full version, ran Reset-CsPoolRegistrarState
for fillrest as wel as serviceret
Followed below as well,
http://social.technet.microsoft.com/Forums/lync/en-US/2a7e27ce-2dea-4e37-91ea-1ed42e110198/issue-updating-from-eval-to-volume-licenses?forum=ocsplanningdeployment
Currently done failover to another pool and users can login,
however i cant get the front end service on this server.Any pointers would be appreciated.
Praveen | MCSE Messaging 2003rit, the command is not doing the trick since its already full version,
PS C:\Users\lyncadmin> Get-CsServerVersion
Microsoft Lync Server 2013 (5.0.8308.0): Volume license key installed.
only one server in one pool, total two pools.
Lync 2013 is on Win 2008 R2, and the event in system im inclining to since i have tried all,
Log Name: System
Source: Schannel
Date: 12/30/2013 9:26:34 AM
Event ID: 36888
Task Category: None
Level: Error
Keywords:
User: SYSTEM
Computer: ACS465-BH102.me.ykgw.net
Description:
The following fatal alert was generated: 10. The internal error state is 1203.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Schannel" Guid="{1F678132-5938-4686-9FDC-C8FF68F15C85}" />
<EventID>36888</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x8000000000000000</Keywords>
<TimeCreated SystemTime="2013-12-30T06:26:34.877077500Z" />
<EventRecordID>64911</EventRecordID>
<Correlation />
<Execution ProcessID="556" ThreadID="620" />
<Channel>System</Channel>
<Computer>ACS465-BH102.me.ykgw.net</Computer>
<Security UserID="S-1-5-18" />
</System>
<EventData>
<Data Name="AlertDesc">10</Data>
<Data Name="ErrorState">1203</Data>
</EventData>
</Event>
Praveen | MCSE Messaging 2003 -
How do I enforce "Show My Picture" instead of "Hide My Picture" in Lync Server 2013?
I was scouring TechNet and the web for a script that could perform the same task as one that I previously used for Lync 2010.
In Lync 2010, we had already used Lync policy to enforce that only the Active Directory photo could be used. One thing that we couldn't set via policy however was the ability to complete remove the "Hide My Picture" option in Lync 2010 client.
This left users with the ability to freely switch between showing the Corporate photo or no photo. I did eventually find and make use of script that constantly checked for this setting switch, then switched all users back to the desired "Show My Picture"
setting. I don't recall who wrote it, but it's easy to find on technet. As we started to move more and more users to our Lync 2013 enterprise pool, I noted that even though the script was running, the setting seemed to be changeable. A closer look revealed
that the script didn't function correctly against SQL for our 2013 pool.
I took the concept and applied it to Lync Server 2013 after studying the differences in Userdata. In Lync 2013, because UserData is in .zip, you need to convert it to 2010 format XML to use logic intended for Lync 2010. My script will extract 2013 data,
convert it to 2010, query for users who are set to "Hide My Picture" and then export any guilty users to an edited2010 XML. The script then converts this to 2013 Format .zip, and uploads the data for these users only. I chose to use Update-CSUserData
insted of Import-CSUserData as this avoids having to restart my Front End. I then use a scheduled task on my Front End server which runs this script every hour.
Please note: You can use this script, but I guarantee nothing about it's functionality, and I am not responsible for how you positively/negatively use it. You should always test things in a Lab Environment. Furthermore, this script was run on a relatively
smaller Enterprise system in which we are by default set to "Show My Picture" and already assigned as part of our user policy the ForceADPhoto attribute. This means that running the script is less intensive on my FE than say on a FE with 10,000 users
where none of the users were set to "Show My Picture". Please keep this in mind when planning to execute against your FE. You may want to edit my script and insert the -UserFilter or -WhatIf in the Export-CsUserData UpDate-CsUserData.
Anyways, I hope this solves the similar issue for many of you Lync 2013 administrators. Please feel free to share my work with others if it does, and also give this post some good feedback and/or mark my post as the answer to your problem.
Alas, here's the script (save it as a .ps1 , i.e. ForceShowMyPicture.ps1)
#Lync 2013 ForceShowMyPicture - Compiled by Octavio A. Serpa (Octavio-Admin on TechNet)
# Import Lync Module
Import-Module “C:\Program Files\Common Files\Microsoft Lync Server 2013\Modules\Lync\Lync.psd1"
###Variables To Set
#This variable is a folder where files will be temporarily written
$folderPath = “C:\Lync2013Scripts\Export”
#This is the FQDN of the pool in which the users you want to target reside
$poolFQDN = “<lyncpool.domain.local>”
###Done
#Message Out
Write-Host -ForegroundColor YELLOW “CHECKING THAT TEMP EXPORT FOLDER PATH EXISTS"
If (-not (Test-Path "$folderPath" -pathType container))
"ERROR: Your Export Directory doesn't exist!"
Exit
Write-Host -ForegroundColor Green “TEMP EXPORT FOLDER DOES EXIST"
Write-Host -ForegroundColor YELLOW “PRE-CLEANING OLD EXPORT/IMPORT FILES"
If (Test-Path "$folderPath\Lync2013UserData.zip") { Remove-Item "$folderPath\Lync2013UserData.zip" }
If (Test-Path "$folderPath\Lync2010UserData.xml") { Remove-Item "$folderPath\Lync2010UserData.xml" }
If (Test-Path "$folderPath\Lync2010EditedUserData.xml") { Remove-Item "$folderPath\Lync2010EditedUserData.xml" }
If (Test-Path "$folderPath\Lync2013EditedUserData.zip") { Remove-Item "$folderPath\Lync2013EditedUserData.zip" }
Write-Host -ForegroundColor Green “PRE-CLEANING COMPLETED SUCCESSFULLY"
#Message Out
Write-Host -ForegroundColor YELLOW “EXPORTING LYNC 2013 POOL USER DATA”
Export-CsUserData -PoolFqdn $poolFQDN -FileName $folderPath\Lync2013UserData.zip
Write-Host -ForegroundColor Green “EXPORT COMPLETED SUCCESSFULLY"
#Message Out
Write-Host -ForegroundColor YELLOW “CONVERTING LYNC 2013 USER DATA TO 2010 FORMAT”
Convert-CsUserData -InputFile "$folderPath\Lync2013UserData.Zip" -OutputFile "$folderPath\Lync2010UserData.xml" -TargetVersion Lync2010
Write-Host -ForegroundColor Green “CONVERSION COMPLETED SUCCESSFULLY"
#Message Out
Write-Host -ForegroundColor YELLOW “CHECKING THAT FORMAT CONVERSION WAS SUCCESSFUL AND .XML EXISTS”
If (-not (Test-Path "$folderPath\Lync2010UserData.xml" -pathType leaf))
"ERROR: Verify that $folderPath is writable!"
Exit
Write-Host -ForegroundColor Green “CONVERSION COMPLETED SUCCESSFULLY"
#Message Out
Write-Host -ForegroundColor YELLOW “LOADING XML”
$d = [xml] (Get-Content "$folderPath\Lync2010UserData.xml")
Write-Host -ForegroundColor Green “XML LOADING COMPLETED SUCCESSFULLY"
#Message Out
Write-Host -ForegroundColor YELLOW “CORRECTING AD PHOTO SETTING”
$changes = 0
$lastProcessedUser = $null
foreach ($hr in $d.HomedResources.HomedResource)
$found = 0
foreach ($c in $hr.Containers.Container)
foreach ($p in $c.Publication)
If ($p.CategoryName -eq 'contactCard' -and $p.InstanceNum -eq 6 -and $p.Data.contactCard.displayADPhoto -eq 'false')
If ($hr.UserAtHost -ne $lastProcessedUser)
"$($hr.UserAtHost) reset"
$lastProcessedUser = $hr.UserAtHost
$p.Data.contactCard.displayADPhoto = 'true'
$p.Version = (([int] $p.Version) + 1).ToString()
$p.PrevPubTime = $p.LastPubTime
$p.LastPubTime = (Get-Date -Format s).ToString()
$found = 1
$changes++
If ($found -eq 0) { [Void]$d.HomedResources.RemoveChild($hr) }
Write-Host -ForegroundColor Green “AD PHOTO SETTING CORRECTIONS COMPLETED SUCCESSFULLY"
#Message Out
Write-Host -ForegroundColor YELLOW “Changes: $changes"
If ($changes -ne 0)
#Message Out
Write-Host -ForegroundColor YELLOW “RE-SAVING XML”
$d.Save("$folderPath\Lync2010EditedUserData.xml")
#Message Out
Write-Host -ForegroundColor YELLOW “CONVERTING LYNC 2010 .XML BACK TO 2013 .ZIP FORMAT"
Convert-CsUserData -InputFile "$folderPath\Lync2010EditedUserData.xml" -OutputFile "$folderPath\Lync2013EditedUserData.zip" -TargetVersion Current
#Message Out
Write-Host -ForegroundColor Green “CONVERSION BACK TO 2013 .ZIP FORMAT SUCCESSFUL"
#Message Out
Write-Host -ForegroundColor YELLOW “IMPORTING LYNC 2013 POOL DATA FOR CORRECTED USERS”
Update-CsUserData -FileName $folderPath\Lync2013EditedUserData.zip -Confirm:$false -Verbose
Write-Host -ForegroundColor Green “IMPORT COMPLETED SUCCESSFULLY"
Write-Host -ForegroundColor YELLOW “STARTING POST-IMPORT-CLEANUP OF EXPORT/IMPORT FILES"
If (Test-Path "$folderPath\Lync2013UserData.zip") { Remove-Item "$folderPath\Lync2013UserData.zip" }
If (Test-Path "$folderPath\Lync2010UserData.xml") { Remove-Item "$folderPath\Lync2010UserData.xml" }
If (Test-Path "$folderPath\Lync2010EditedUserData.xml") { Remove-Item "$folderPath\Lync2010EditedUserData.xml" }
If (Test-Path "$folderPath\Lync2013EditedUserData.zip") { Remove-Item "$folderPath\Lync2013EditedUserData.zip" }
Write-Host -ForegroundColor Green “POST-IMPORT-CLEANUP COMPLETED"
#Message Out
Write-Host -ForegroundColor Green “AD PHOTO SETTING SUCCESSFULLY UPDATED"When I try to run this I get the follow error. Any thoughts?
Update-CsUserData : Unable to cast COM object of type 'System.__ComObject' to interface type
'Microsoft.Rtc.Interop.User.ICsUserManagement'. This operation failed because the QueryInterface call on
the COM component for the interface with IID '{D5ADD966-BDC3-4A8F-BFE8-6A59A9F74CB2}' failed due to the
following error: Class not registered (Exception from HRESULT: 0x80040154 (REGDB_E_CLASSNOTREG)).
At C:\Lync2013Scripts\ForceDisplayPhoto.ps1:113 char:1
+ Update-CsUserData -FileName $folderPath\Lync2013EditedUserData.zip -Confirm:$fal ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : InvalidOperation: ([email protected]:String) [Update-CsUserData], Invalid
CastException
+ FullyQualifiedErrorId : Microsoft.Rtc.Management.AD.Cmdlets.ImportOcsUserDataCmdlet -
Lync HP 4120 Sign in problems with Lync Server 2013
Hi, this is my second request for help, this with more information...
I`ll ready install the follow infrastructure: (I change the name of my organization for contoso)
Lync Server 2013 Installation with Enterprise mode with 1 front end : Pool: lync.contoso.com Front End: lyncfe01.contoso.com Back End: lyncsql01.contoso.com
I`ll ready install a PKI infrastructure with two tiers, the root offline and the subordnate ac.contoso.com
This with the defailt algorithm configuration RSA SHA1
My phones are HP 4120
In the Front End Server i configured the SCHANNEL registers:
EnableSessionTicket in 2
Send..etc in 0
Ok, the installation is ok, services are OK, Client login trough PC its OK, PSTN Configuration... (I can make a phonecall with the lync client of Office 365)
Commnd Checks:
When i run the command Test-CsPhoneBootstrap -PhoneOrExt 12345 -PIN 123456 -TargetFqdn lync.contoso.com
The result is:
Target Fqdn : lync.contoso.com
Target Uri : https://lync.contoso.com:443/CertProv/CertProvisioningService.svc
Result : Success
Latency : 00:00:09.0559615
Error Message :
Diagnosis :
When i run the command Test-CsPhoneBootstrap -PhoneOrExt 12345 -PIN 123456 for
check the DHCP the result is:
Target Fqdn : lync.contoso.com
Target Uri : https://lync.contoso.com:443/CertProv/CertProvisioningService.svc
Result : Success
Latency : 00:00:09.0559615
Error Message :
Diagnosis :
When i run the follow command
PS C:\Users\Administrator> $cred = Get-Credential
cmdlet Get-Credential at command pipeline position 1
Supply values for the following parameters:
Credential
PS C:\Users\Administrator> Test-CsClientAuth -TargetFqdn lync.contoso.com -UserSipAddress "sip:[email protected]" -UserCredential $cred
I got this:
Target Fqdn : lync.contoso.com
Target Uri : https://lync.contoso.com:443/CertProv/CertProvisioningService.svc
Result : Success
Latency : 00:00:00.3431783
Error Message :
Diagnosis :
But.. when i use the same command but i remove the -targetFqdn for check the Dhcp i got this:
VERBOSE: Workflow Instance Id 'bca95636-af7b-4b0a-b43d-dba259294b2d', started.
VERBOSE: Command line executed is 'Test-CsClientAuth -UserSipAddress "sip:[email protected]" -UserCredential $cred
-Verbose'.
Target Fqdn :
Target Uri :
Result : Failure
Latency : 00:00:00
Error Message : 10060, A connection attempt failed because the connected party did not properly respond after a period
of time, or established connection failed because connected host has failed to respond 194.90.8.20:5061
Inner Exception:A connection attempt failed because the connected party did not properly respond after
a period of time, or established connection failed because connected host has failed to respond
194.90.8.20:5061
Diagnosis :
VERBOSE: Workflow 'Microsoft.Rtc.SyntheticTransactions.Workflows.STClientAuthWorkflow' started.
Workflow 'Microsoft.Rtc.SyntheticTransactions.Workflows.STClientAuthWorkflow' completed in '5.62E-05' seconds.
Target web service Url not provided. Will have to extract it from authentication challenge.
An exception 'Unable to establish a connection.' occurred during Workflow
Microsoft.Rtc.SyntheticTransactions.Workflows.STClientAuthWorkflow execution.
Exception Call Stack: at Microsoft.Rtc.Signaling.SipAsyncResult`1.ThrowIfFailed()
at Microsoft.Rtc.Signaling.Helper.EndAsyncOperation[T](Object owner, IAsyncResult result)
at Microsoft.Rtc.SyntheticTransactions.Activities.GetSTSUriActivity.InternalExecute(ActivityExecutionContext
executionContext)
at Microsoft.Rtc.SyntheticTransactions.Activities.SyntheticTransactionsActivity.Execute(ActivityExecutionContext
executionContext)
at System.Workflow.ComponentModel.ActivityExecutor`1.Execute(T activity, ActivityExecutionContext executionContext)
at System.Workflow.ComponentModel.ActivityExecutorOperation.Run(IWorkflowCoreRuntime workflowCoreRuntime)
at System.Workflow.Runtime.Scheduler.Run()
at System.Net.Sockets.Socket.EndConnect(IAsyncResult asyncResult)
at Microsoft.Rtc.Internal.Sip.TcpTransport.OnConnected(Object arg)
'GetSTSUri' activity started.
Starting STS Uri Discovery...
ERROR getting STS Uri.
'UnRegister' activity started.
'UnRegister' activity completed in '3.12E-05' seconds.
VERBOSE: Workflow Instance ID 'bca95636-af7b-4b0a-b43d-dba259294b2d' completed.
VERBOSE: Workflow run-time (sec): 126.0548512.
The Real Problem is that my Lync HP 4120 Phone can't make a sign in, not from USB cable loging, nor with PIN authentification
When I try to make a login with the USB cable, I set the user and password and the phone says "Connecting to Lync".. "Downloading a certificate" ... "Installing certificate"... "Downloading Certificate"...
"Installing Certificate".. forever
When I try to make a login with PIN Authentification, the phone first displays the following:
Account used is not authorized, Please Contact your support team and then shows this:
An Account matching this phone number cannot be found. Please contact your support team.
The Pin authentification is enable
In the Lync Server Enable Kerberos Authentification, Enable Integrated Windows Authentification and Enable Certificate Authentification are enable
This is the configuration from DHCP
Starting Discovery ...
Sending Packet (Size: 284, Network Adapter: xx.xx.xx.xx, Attempt Type: Broadcast only)
--Begin Packet--
DHCP: INFORM (xid=130EA7FA)
DHCP: Op Code (op) = 1
DHCP: Hardware Type (htype) = 6
DHCP: Hops (hops) = 0
DHCP: Transaction ID (xid) = 319727610
DHCP: Seconds (secs) = 0
DHCP: Flags (flags) = 0000
DHCP: Client IP Address (ciaddr) = Xx.xx.xx.xx
DHCP: Your IP Address (yiaddr) = 0.0.0.0
DHCP: Server IP Address (siaddr) = 0.0.0.0
DHCP: Relay IP Address (giaddr) = 0.0.0.0
DHCP: Client HW Address (chaddr) = FC15B4###--End Packet--
Received Packet
Sender:xx.xx.xx.xx:67, Size:363
--Begin Packet--
DHCP: ACK (xid=130EA7FA)
DHCP: Op Code (op) = 1
DHCP: Hardware Type (htype) = 6
DHCP: Hops (hops) = 0
DHCP: Transaction ID (xid) = 319727610
DHCP: Seconds (secs) = 0
DHCP: Flags (flags) = 0000
DHCP: Client IP Address (ciaddr) = xx.xx.xx.xx
DHCP: Your IP Address (yiaddr) = 0.0.0.0
DHCP: Server IP Address (siaddr) = 0.0.0.0
DHCP: Relay IP Address (giaddr) = 0.0.0.0
DHCP: Client HW Address (chaddr) = FC15B4100289
DHCP: Server Host Name (sname) =
DHCP: Boot File Name (file) =
DHCP: Magic Cookie = 99.130.83.99
DHCP: Option Field
DHCP: DHCP MESSAGE TYPE( 53) = (Length: 1) DHCP ACK
DHCP: Server Identifier( 54) = (Length: 4) XX.XX.XX.XX
DHCP: Client Identifier( 61) = (Length: 0) ()
DHCP: SIP Server( 120) = (Length: 17) enc:0 lync.contoso.com (00046C796E6306756E69736F6E026D7800)
DHCP: Host Name( 12) = (Length: 0)
DHCP: Vendor Identifier( 60) = (Length: 0)
DHCP: Param Req List( 55) = (Length: 0) 0 0
DHCP: Vendor Info( 43) = (Length: 86) MS-UC-Clienthttpslync.contoso.com443%/CertProv/CertProvisioningService.svcÜNAP (010C4D532D55432D436C69656E7402056874747073030E6C796E632E756E69736F6E2E6D78040334343305252F4365727450726F762F4365727450726F766973696F6E696E67536572766963652E737663DC034E4150)
DHCP: End of this option field
--End Packet--
Result: Success
DHCP Server : xx.xx.x.xx.
SIP Server FQDN : lync.contoso.com
Certificate Provisioning Service URL : https://lync.contoso.com:443/CertProv/CertProvisioningService.svc
thanks for all, hope somebody can help me with this problem.. i am going crazy...Hi, i connected the Lync Phone to another switch and i update the firmware to the newest firmware and i got the same problem..
The lync phone download the certificate but cant install it and the still the same error with the SIP login
An Account matching this phone number cannot be found. Please contact your support team. -
Could anyone please explain why the director has been removed from spotlight as it had much importance in LYNC 2010 and now being an optional role in LYNC server 2013.[any call flows regarding director servers would be much useful]
Hi SJ Praveen,
A Director is a server running Lync Server 2013 that authenticates user requests, but does not home any user accounts. Lync 2013 Front End servers have the same registrar service and functionality
as the Director.
The Director isn't providing any special functionality. If the Director goes down, all pools would become inaccessible when the clients queried DNS for the SRV record until an administrator
makes a manual internal DNS change that points users to a Front End pool to handle the sign-in request from Lync clients. Microsoft has made the Director functionality relevant for organizations that have specific security requirements, such as allowing all
external users to register to a specific internal server instead of the Front End servers. This server role is merely optional and not needed for most Lync Server 2013 deployments.
Best regards,
Eric -
In my opinion, the error has not completely fixed in KB2967628. After I install the latest November 2014 cumulative
update. I see the following behavior. User A searches for user B. User B never sign in to the Link. There are three fields in the active directory for User B: officePhone, mobilePhone and homePhone (these fields contain different numbers). When searching on
the mobile client (Android/IOS) for user B – as result user A see only mobile number. If User B At least once will go to Link (sign in) when his search will work, (find officePhone). If User B will change, the privacy settings for user A is in the search will
be displayed homePhone field.
On the Desktop client,
I can find all the fields without those actions performed in the example. If I make a request
to the service UCWA manually like this (below
the text) before
actions, which I performed in example, I did not receive officePhone and homePhone – only mobilePhone field.
GET "https://lync.domainname:443/ucwa/oauth/v1/applications/XXXX/people/search?query=$usename$&limit=200" -H "Content-Type: application/json" -H "Accept: application/json" -H "Authorization: $USENAMETOKEN$"Hi,
Based on your description, I’m sorry I’m a little confused about the following you mentioned. I understand the issue is we can only see the mobile number in the contact card on Lync mobile client and that we can search for users based on their office number,
we can see the home phone field in the contact card but there isn’t number showing. I anything I have misunderstood, please feel free to let us know.
“When searching on the mobile client (Android/IOS) for user B – as result user A see only mobile number. If User B At least once will go to Link (sign in) when his search will work, (find officePhone). If User B will
change, the privacy settings for user A is in the search will be displayed homePhone field.”
According to the KB29677628, this issue is caused by UCWA only sending the work number, and we need to install the update for web components server
http://support.microsoft.com/kb/2967628/en-us
August 2014 Cumulative Update 5.0.8308.738 for Lync Server 2013, web components server
https://support.microsoft.com/kb/2937297/en-us?wa=wsignin1.0
Could you please run the following command to check if the web components server version is
5.0.8308.738?
Get-WmiObject
–query 'select * from win32_product' | where {$_.name
–like "Microsoft Lync Server*"} | ft Name, Version
–AutoSize >c:\User\name\Desktop\version.txt
Best Regards,
Cindy -
The CompileSPL.exe in the Lync Server 2013 SDK can't compile the application manifest file
My windows server version is 2012 standard, I deployed the lync server 2013 to my environment, and ran the lync server 2013 SDK on the front end pool. Today, I wanted to compile a application manifest file, but I got the warning that this app can't run on
your pc, to find a version for your pc, check with the software publisher.Hi,
The issue is related to Lync Server 2013, I suggest you ask for help from Lync Server 2013 SDK forum for better and accurate answer to the question.:
http://social.msdn.microsoft.com/Forums/lync/en-US/home?forum=communicationsserversdk&filter=alltypes&sort=lastpostdesc
Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Download issue on microsoft lync server 2013
Error on clicking registration link while downloading lync server 2013 evaluation version. please help me from where i can download the lync server 2013 now.
http://www.microsoft.com/en-us/evalcenter/evaluate-lync-server-2013Hi
That link works fine, did you register at all as the sites requests? Once you have registered it will give you the option to download with a download manager.
Do you get this far?
Hope this helps. Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. -
Lync Server 2013 in a Remote Desktop Environment
Hello Community,
We have a client who is sold on Lync. He wants to install Lync server in a Terminal Server but his environment is RDHS 2008v2 and his end users have thin clients. According to MS official position It is not supported. Has anyone successfully implemented
this ? If yes what are the pitfalls that lay ahead with regards to audio/video redirection, desktop sharing etc. He has traditional phones but really he wants to get rid of them and go Lync full blown.The Virtualizing Lync Server 2013
(WindowsITPro) article presents a nice overview to this topic.
In additon, do take a look at the following resources which may be helpful:
Planning a Lync Server 2013 Deployment on Virtual Servers
http://www.microsoft.com/en-us/download/details.aspx?id=41936
Deploying the Lync VDI plug-in in Lync Server 2013
http://technet.microsoft.com/en-us/library/jj204683.aspx
Making the Microsoft Lync to work best in your virtualization environment
http://www.youtube.com/watch?v=WiZX3uoVKV8
Note that unlike Lync Server 2010, the Lync 2013 VDI browser plug-in is designed to support VDI environments (with paired audio/video) running on supported platforms (from Windows Server 2008 R2 to 2012/R2).
Hope this helps.
Thanks / rgds,
TechNet/MSDN Forum Moderator - http://www.leedesmond.com -
Clean up Active Directory after dirty deleted lync server 2013
Hi All,
i have trouble with my lync server, im gonna re-deploy my lync server 2013 after it has deleted without no purpose.
based on my experience if we want to deploy with the same name and configuration like previously. setup with failed because it has already register in adsiedit ?
please tell me how to clean up my AD.
thanks for you assistance guys,
Best Regards,
ariHi,
On DC, please run adsiedit and connect to the Configuration naming context.
Browse down to Configuration > Services > RTC Service and then just delete the entire
RTC Service container. Also delete the Computer object(s) for any Lync Server you had previously installed. Then you can install the new Lync Server 2013 with no issue.
Here is a similar case may help you:
https://social.technet.microsoft.com/forums/lync/en-US/2fbbb75c-8e76-4284-9f32-a27e95e30c49/remove-lync-from-ad-for-fresh-deployment
Best Regards,
Eason Huang
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Eason Huang
TechNet Community Support
Maybe you are looking for
-
Looking for a customizable, shared checklist app
Im an HVAC contractor and Im looking for a "checklist" type app that will allow me to update the status of my quarterly service contracts in real time. Must be able to share this info in real time to all my techs as well as be customizable so that I
-
How to change the Development Class of the SAPSCRIPT FORM
Hi All, I have transported the old form which needs to be deleted in Test System. Is that possible to create a TR for deletion and send it to Test enivronment?.. Also is it possible to change the development class for a form? Please h
-
ORA-27369: job of type EXECUTABLE failed with exit code: Incorrect function
Hello, I am calling a windows bat file using dbms_scheduler and getting the following error. I have searched the forum and the internet and tried different switches and options. None of them solved my problem. Oracle Version: Oracle Database 11g Ente
-
Hi, I have been trying to figure out how to create and get the total final score for a simple survey form with 35 statements, each having a choice of 5 responses, without success. Each question has 5 radio buttons that are grouped together (exclusion
-
Get/Save PDF file generated by Reports.
How can I get the temporary .pdf file stored in the cache by Reports Server when, there is a request for a report? When the a request to view output as PDF file? Reports server stores the output PDF file in the server cache but generates bogus alphan