Does Lync Support Viewer Remote Control of Video Cameras?

Hello,
I was wondering whether Lync has the following functionality:
1) Does Lync have the ability to allow meeting viewers to control the videocameras that are being used by a presenter? So assuming I have the proper pan tilt zoom camera/hardware, if I was a "presenter" in a meeting, could I allow my "guest"
viewers to control my cameras? (Up, down, left, right, and zoom)
2) Does Lync allow for a single user to transmit multiple videocamera feeds at once?

1) No, not natively, but with third party help possibly.
2) Not really, but there are some specialty devices which might be interesting... Check out the Polycom CX5500
http://www.polycom.com/products-services/products-for-microsoft/lync-optimized/cx5500-unified-conference-station.html
https://www.youtube.com/watch?v=bjp3XvIdYYE
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer".
SWC Unified Communications

Similar Messages

Does ilife11 support a 60 fps HD Video camera?

Does ilife11 support a 60 fps hd video camera? i am in the process of purchasing a new camera and need to know if ilife11 can upload, edit and process a movie.

http://help.apple.com/imovie/cameras/en/index.html?lang=en_US

Remote control Sony video camera with Mac Mini?

Is it possible to connect an IR transmitter to a mac mini to be able to control a Sony camera from a remote location miles away? Specificaly, I want to be able to point my Sony IR remote control at my Mac Book Pro at home to control a video camera at work via the internet. Control features include focus, zoom, iris, White balance, etc. Is this possible? (The Sony camera comes with a remote control)

I never heard of such a device but there's a bunch of stuff in Google:
"Results 1 - 10 of about 611,000 for "long distance remote control."
Your best bet would probably be a telephone, with the person at the other end in the same room as the camera.

Does anyone have the Sony HDR-XR500V video camera??

Does anyone have the Sony HDR-XR500V video camera??
Is it compatible with a G5 PowerPC? Any pros? or cons? Please advice.

I'd stay away from Sony unless you are buying pro stuff, but even then...
Sony software is only compatible with windows & their mac support is pretty much non-existant.
plus, hard drive camcorders are a terrible idea! if you start having problems, poof, there goes the hours of footage. Even the Sony cams that use flash cards are a bad choice - you usually have to buy their magic gate cards.
I'd stick with Panasonic or Canon cameras that are SDHC+Internal or just SDHC. AT least this way the cards can be replaced, you can expand the memory, & it's SD - much cheaper to buy than the magic gate cards.
check out camcorderinfo.com for more info & reviews.
Now, to import your footage, you will need an app like Voltaic as importing AVCHD with Apple's video apps is only supported on Intel machines. You can still edit with iMovie or Final Cut - the versions that support HD, but the initial import from the camera will have to be done with the 3rd party utility.
http://www.shedworx.com/voltaichd
http://www.camcorderinfo.com/

Iphoto does not support the resolution of my dslr camera...how do i upload full resolution photos?

iphoto does not support the resolution of my dslr camera...how do i upload full resolution photos?

You actually need to give information to get help - just stating an abstract problems (which is most certainly not a problem at all) gives the volunteers hearer nothing to work with to help you
What version of iPhoto? Of the OS? What exactly is the problem (iPhoto does support the resolution of your camera so that is NOT a problem)? what exactly are you doing? What error messages do you get? why do you incorrectly think that iPhoto does not support full resolution?
At this time your question is like my car won't start - why not? Could be anything from you did not put the key jun to being out of gas to having the engine stolen - no way to tell anything - except that the problem you claim is not true (at least in my example I would know that the car did not start)
LN

Does Safari support/run ActiveX controls?

I need to have Remote Access to my work from my iPad. There is a box that pops up stating "This portion of the Remote Web Workplace requires the Microsoft Remote Desktop ActiveX Control. Your browser's security settings may be preventing you from downloading ActiveX controls."
Anyway to do this??

The iPad does not support Windows only ActiveX. There are apps that allow you to remotely access your PC such as SplashTop Remote. Check it out in the app store.
Message was edited by: Demo

Does JMF Support multilingual absolute paths for video playback?

Hi everyone,
I hope I can find some answer here.
Does JMF supports multilingual paths for videos? E.g. I have a video located by the following URL:
G:\video\Stürmische\video.mp4
When I try to open this video by JMF, I get the following Exception: Problem playing video+
javax.media.NoPlayerException: Cannot find a Player for :file:/G:/video/Stürmische/video.mp4_
When I use the same video.mp4 file with path containing only simple latin letters, it's played normally.
Is there any problem with JMF regarding to multilingual paths?
Many thanks,
Armine

868310 wrote:
I assume that it's a JMF cons. and IMHO, multilingual support for video paths/names should be added in it.Several things...
1) JMF is designed to play both local files and RTP/RTSP file sources. As such, it uses URLs as resource locators. It makes perfect sense to make that design decision.
2) URL encoding only allows alphanumeric characters and a handful of special characters. Considering the internet was invented by the United States army and our keyboards don't have those symbols, it makes perfect sense to make that design decision.
3) Most importantly, JMF hasn't been updated since 2002 and development has been completely discontinued... so "multilingual support" won't ever be added to it.
And it isn't multilingual support you're asking for, it's support for non-ASCII characters.
It is my understanding that you can take a path like:
G:\video\Stürmische\video.mp4
Run it through some encoding procedure, and come out with a usable URL like:
G:%5Cvideo%5CSt%FCrmische%5Cvideo.mp4
Which I got by using the encoder on the following website:
http://www.blooberry.com/indexdot/html/topics/urlencoding.htm
Coincidentally, had you done the research that I suggested you do, you might have learned that Java already has something built in to handle encoding non-compliant URLs for you.
http://download.oracle.com/javase/1.5.0/docs/api/java/net/URLEncoder.html
So, I'd expect you could use the URLEncoder class to implement suggestion #3 from my previous post.

Does anyone make a remote control for vixia hfr200 camcorder

i am wanting to start a you tube channel but could really use a remote control zoom for cannon vixia hfr200 camcorder but so far have had no luck finding one. Do anyone know if someone makes one???

Hi Radioperson,
Welcome to Sony Community!
You may refer to these links for your inquiry on a Sony portable radio:
http://store.sony.com/cd-players-boomboxes/cat-27-catid-All-CD-Players-Boomboxes
http://store.sony.com/clocks-radios/cat-27-catid-All-Clocks-Radios
Thanks!
- Chris

Macbook pro fails to read sd card with movies recorded on it, any ideas? I can view them in the video camera so know they are there somewhere. I am now thinking I should have formatted or initialised the new card before using it.

My macbook pro is failing to read a new sd card with movies recorded on it. Any ideas please? A previously used SD card has downloaded without problems. I have tried using a card reader as well as downloading from the video camera itself, neither works.
I can view the latest recordings on the video camera so know they are there somewhere. I am now thinking I should have formatted or initialised the new card before using it but didn't think of that at the time. Obviously don't want to do this now as it will wipe the movies.

Hi and Welcome to the Forums!
From everything you've described, you've done everything possible. Hence, I recommend you seek out your warranty support.
Good luck and let us know.
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

OS X does not see my Sony DCR-PC110 video camera?

I just got the new all in one 27" MAC and could not wait to start editing my videos. Then a problem, I hook up my Sony DCR-PC110 with fire wire and nothing happens. The camera does not show up in the system at all, and of course Final Cut Express 4.0 show "No Comunication" instead of "VTR OK".
Is this camera no longer supported?
Is there anything I can try to get it to work?
Last but not least, if there is a compatability problem how can I get my collection of the kids video from the digital tape into Final Cut Express?
Thanks in advance for any guidance on this.

Hi
As I see it - it should work.
See my list (most should apply)
*NO CAMERA or A/D-box*
Cable
• Sure that You use the FireWire - USB will not work for miniDV tape Cameras
FireWire - Sure not using the accompany USB-Cable but bought a 4-pin to 6-pin FW one ?
• Test another FW-Cable very often the problem maker.
Camera
• Test Your Camera on another Mac so that DV-in still works OK
• Toogle in iMovie pref. Play-back via Camera (on<->off some times)
• Some Cameras has a Menu where You must select DV-out to get it to work
Does Your Camera work on another Mac ?
Sorry to say it is to easy to turn the 6-pin end of the FW-cable 180 deg wrong.
This is lethal to the A/D-chip in the Camera = needs an expensive repair.
(Hard to find out - else than import/export to another Mac ceased to work
everything else is OK eg recording and playback to TV)
Connections
• Daisy Chaining most often doesn’t work (some unique cases - it’s the only way that work (some Canon Cameras ?))
Try to avoid connecting Camera <--> external HD <--> Mac but import directly to the Mac then move
the Movie project to dedicated external hard disk.
Mac
• Free space on internal (start-up) hard disk ? Please specify the amount of free space.
(Other hard disks don't count)
I go for a minmum of 25Gb free space for 4x3 SD Video - and my guess is 5 times more for 16x9 HD ones
after material is imported and edited.
SoftWare
• Delete iMovie pref file may help sometimes. I rather start a new account, log into this and have a re-try.
• Any strange Plug-ins into QuickTime as Perian etc ? Remove and try again.
• FileVault is off ? (hopefully)
Using WHAT versions ? .
• Mac OS - X.5.4 ?
• QuickTime version ? (This is the heart in both iMovie and FinalCut)
• iMovie 8 (7.1.?) ?
• iMovie HD 6 (6.0.4/3) ?
*Other ways to import Your miniDV tape*
• Use another Camera. There where tape play-back stations from SONY
but they costed about 2-4 times a normal miniDV Camera.
• If Your Camera works on another Mac. Make an iMovie movie project here and move it
over to Your Mac via an external hard disk.
(HAS TO BE Mac OS Extended formatted - USB/DOS/FAT32/Mac OS Exchange WILL NOT DO)
(Should be a FireWire one - USB/USB2 performs badly)
from LKN 1935.
Hi Bengt W, I tried it all, but nothing worked. Your answer has been helpfull insofar as all the different trials led to the conclusion that there was something wrong with my iMovie software. I therefore threw everything away and reinstalled iMovie from the HD. After that the exportation of DV videos (there has not been any problem with HDV videos) to my Sony camcorders worked properly as it did before. Thank you. LKN 1935
from Karsten.
in addition to Bengt's excellent '9 yards of advice' ..
camera set to 'Play' , not rec/computer/etc.?
camera not on battery, but power-line?
did your Mac 'recognize' this camera before...?
a technical check.
connect camera, on, playback, fw-connected...
click on the Blue Apple, upper left of your screen ..
choose 'About../More..
under Firewire.. what do you read..?
More
• FileVault - Secure that it’s turned off
• Network storage - DOESN’T WORK
• Where did You store/capture/import Your project ?
External USB hard disk = Bad Choise / FireWire = Good
If so it has to be Mac OS Extended formatted
----> UNIX/DOS/FAT32/Mac OS Exchange is NOT Working for VIDEO !
mbolander
Thanks for all your suggestions. What I learned is that I had a software problem. I had something called "Nikon Transfer" on my Mac that was recognizing my Canon camcorder as a still camera and was preventing iMovie from working properly. After uninstalling Nikon Transfer and doing a reboot, everything worked great.
I never liked the Nikon Transfer software anyway--I guess I'll get a cheap card reader and use that to transfer photos in the future.
*No Camera or bad import*
• USB hard disk
• Network storage
• File Vault is on
jiggaman15dg wrote
if you have adobe cs3 or 4 and have the adobe bridge on close that
or no firewire will work
see if that halps
DJ1249 wrote
The problem was the external backup hard drive that is connected, you need to disconect the external drive before the mac can see the video camera.
Yours Bengt W

I want to know if ios 7 gives tv out support to third party apps and does it support viewing office documents in a tv through the tv out cable without any other software

I have an iphone 4s and i use it to display pictures,videos in a tv or a projector using the tv out cable, i want to see if ios 7 still support this feature and does it give this support to third party applications too. I does io7 need any third party applications to view microsoft office documents in a tv using cable??

It seems they deleted my post from discussions. Thanks.

Nokia n8-00 does not support dvr remote H264Midlet

Hello to everybody.
My name is Michael and I own the n8 model which I discover that dvr remote doesn't work in my shop cameras as other and chipper phones do, like androids. The program that the security company gave me is H264Midlet from Symbian(DVRX264) folder and shows me only the first setup camera but not the other three cameras. In addition security company claims that Nokia didn't update the software to accept that program.
Can anyone help me on this or even gives me any other program that works well?
Thank you in advance

If it is a fake, than why store.ovi.com recognises it? Very weird.
Edit: I found this info in it:
'' Ver: 05.20
18.08.2011
RM-233
Variant 00.00 "
If something does not go well, ask for help right here.
Also, a click on the white star under my posts that helped you is very appreciated.

Does E4200 support Sony Remote play?

I have a Sony Vita , PS3, & Cisco ASA 5505 firewall. I can get remote play to work only if the PS3 is powered on. The ASA will kill any Wake-on LAN packet no matter what I do to try to allow it. Apparently it doesn't support directed broadcast.
Has anyone gotten Remote Play to worth with Wake-on LAN through an E4200 or E4200v2 (not sure which one I need)?
Thanks

Well, some of the user claims that WOL can be resolved. So here is the link: http://homecommunity.cisco.com/t5/Wireless-Routers/E4200-Port-forward-to-broadcast-for-WOL/td-p/3720...
So, please follow the steps mentioned in the above link and see it that helps for you…

Does iOS support viewing Track Changes?

I'm trying to open Word documents that contain track changes but the iPad only seems to view the 'Final' version. Curious if there is a setting to change this. Thanks in advance.

I wish Apple would go back to the way changes and comments were displayed in Pages '09 rather than the way they are displayed in Pages 5. It seems like a massive step backward and I even had a professor state that Microsoft veered away from the direction that Apple seems to be moving toward with this last update. So I have elected to keep using Pages '09 because I am working with scientific manuscripts that have various drafts and it is to important to be able to quickly identify who made changes rather than slowly clicking through each edit to find the specific ones that are critical.

Does this support AVCHD files straight from the camera (Panasonic)??

Does the new final cut pro X support AVCHD files from the camera? I record with a Panasonic AG-HMC40.
Thank you

FCPX doesn't import AVCHD files from my Panasonic GH-2, even though importing works perfectly into iMovie. So just because camera X imports natively into iMovie, it isn't certain it will import natively into FCPX.
iMovie archives will always import because the AVCHD has already been converted to ProRes on import.
In FCPX the AVCHD files from say a GH-2 can be edited natively if you don't want to re-render into ProRes, but to date I can't import them to test this.
Chris.

Does Lync Support Viewer Remote Control of Video Cameras?

Similar Messages

Maybe you are looking for