Does Mac Migrate copy bad files/sectors?
I upgraded my MBP internal hard drive to a Samsung 1TB and it crashed for the 2nd time (will never buy another Samsung). So this time, I purchased a WD and migrated my system to the new drive sucessfully. I just wanted to see if anyone knew if the migrate function simply copies files or if it copys sectors of the hard drive. Basically I just want to know if Mac Migrate will copy the crap from the Samsung drive that might cause my new WD to act up - or if that's possible?
Migration copies files. If the files are corrupt, the corrupt data will be copied, but it won't affect the integrity of the disk in any way. If the disk that you are copying from has bad sectors, the copy may fail outright. If the disk can't be read, it can't be read.
Contemporary hard disks track bad blocks in firmware on the disk. Formatting and zeroing out the disk will force the disk to refresh it's internal map of bad blocks. All disks have a certain number of bad blocks on them at the time of manufacture, and these blocks are already mapped and ignored when you receive a new drive. The appearance of new bad blocks on a disk generally indicates either wear or a manufacturing defect. I would treat a drive that 's accumulated new bad blocks as a drive that has reached then end of its operational life and replace it.
Similar Messages
-
Rescue and Recovery 4 DOES NOT RESCUE/COPY LARGE FILES?!
Hello all,
Thank you in advanced for helping me out/any helpful advice you may have.
System:
Windows XP Professional
T61
4 GB RAM
2.50 Ghz Dual Core Intel Processor
120 GB Hard Drive
140m nVidia Quadro video card (256 MB available memory I believe)
Problem Summary:
I ran into the unlucky computer problem of having a Microsoft.net framework addon for Firefox 3.5.3 result in a fatal interaction leaving me unable to boot up in both safe and normal mode. If you do have this addon, please uninstall it NOW, so that it does not happen to you. There is no current fix or patch for it as far as I know. Luckily, I have the (formerly) fantastic Rescue and Recovery 4 to backup my files and fix things.
So in sequence of what I did:
Tried several different attempts to fix problem to no avail (via google searches on the Rescue and Recovery Browser)
Decided that it would be best to just reformat the drive and start a clean install.
I had not done a real back up recently (several months due to my own carelessness and being busy).
I chose to do a full factory restore using the 'Rescue My Files' option, since I had never done a backup using the included Lenovo Software, I usually just ran my own manual ones in Windows.
To be on the safe side, I just decided to transfer my entire hard drive directory 'C:' to my 500 GB External Western Digital Hard Drive. I know I didn't really NEED all the files (like program files I would just need to reinstall anyway). I just wanted to return my computer to how it was as fast as possible.
Rescue and Recovery registered as copying all my data (rougly 50-60 GB) of data to my external USB Hard Drive.
I then unplugged my External USB Drive From the computer once it said it was complete. Rescue and Recovery proceeds with the factory restore.
Things are going well, factory restore is successful, no problems yet.
Once Windows was functional again and I had remade my usernames and settings just as it was before the crash, I plugged in my External HD again to restore my files.
Every file that I copied was there EXCEPT FOR MY MOST IMPORTANT ONES. It appears the directory, 'C:\Documents and Settings\Justin\My Documents'
AND
'C:\Documents and Settings\Justin\Desktop'
DID NOT COPY. I DID A DOUBLE CHECK, and the program said that all files had transferred successfully and I saw the directories on the USB Hard Drive in the Rescue and Recovery View. (I did not do a double check on another windows computer with my USB Hard Drive, however as I did not have access to one at the time and I was trusting in the Lenovo software, which did actually manage to rescue all the files, except for my most important ones.)
Is there anyway way that:
That because these files were so large (probably account for 50% of all data copied to my external USB Drive or 10-15 GB a piece), that the Rescue and Recovery file simply "passed over them"? The other files appeared to copy perfectly fine.
There was an error with the program, like a file size limit cap that Rescue and Recovery cannot surpass so they were just skipped over?
My own carelessness? Are all the root files not selected when you choose the entire 'C:' Drive as a directory? I did just choose to copy/rescue the entire 'C:' Drive and everything else (besides my two most important files) seemed to copy over so I do not beleive that this is the case.
I did not individually, select each file in the 'C:\Documents and Settings' because I assumed that it would select each of the root files within it. (Is that not the case?)
That the files are 'hiding' somewhere due to their large size?
Most importantly of all:
IS THERE ANYWAY THAT I CAN RECOVER MY DATA? There is about 2 years worth of photos, music, documents, etc. that I would like to have back that I do not have a recent back up of.
If anything, does anyone know WHY this happened? It was my understanding that Lenovo Rescue and Recovery was some of the best software for emergency crashes out there. And now it has failed me miserably. I'd at least like to know why it happened so that I may not repeat my mistake (or put too much faith in Lenovo) for the future.
I've run some data recovery software but I know it will not recovery all the files that I once had in their state before my hard drive was reformatted back to factory settings.
Thank you,
-nofeet3
JustinHello , and ARGH !
I AM HAVING THE EXACT SAME PROBLEM RIGHT NOW !
If anybody could help this would really be appreciated .
Here is the story
Lenovo SL500
Windows XP SP3 I think
Specs maybe not too important
My computer has some corrupted file and will not boot in normal or safe mode . When I try to do either , it starts booting , but before it finishes the load-up-windows screen , it displays an error message which says
" lsass.exe - System Error
the endpoint format is invalid "
and then goes no further , and the machine simply restarts itself again and would do this indefinitely if I didn't stop it .
SO when it starts booting and shows the Lenovo Logo , I press the Lenovo Help/Tool Button to enter Rescue and Recovery [not sure what version it is , I cannot find information within it] and it gives me the option to Rescue files before recovering the system . I have the same problem as Nofeet3.
It rescues all the small files
BUT WILL NOT RESCUE ANY OF MY IMPORTANT FILES
CERTAINLY IT DOES NOT RESCUE ANYTHING BIG [or bigger than roughly 2mb]
It rescues picture files BUT WILL NOT RESCUE MUSIC FILES !!
It may not even rescue bigger picture files , but I haven't noticed any pictures it has not copied since I can't go through ALL my picture files to see exactly what it has / hasn't copied.
However , not a single music file is copied.
It will NOT show up on the hard drive . What is strange , is when I try to plug the hard drive back in to try and copy the music files again , as I tried it a few times , it asks me if I would like to Write these files over the files already there , as though it has already copied. I check the hard disk , and these fils have definitely NOT copied onto the Disk . They are nowhere to be found .
I don't think the files are hiding , but if they are , maybe somebody could tell me where.
I suspect though that Rescue and Recovery has "recorded" the files as having been copied , some kind of record , EVEN THOUGH THEY HAVEN'T !! Or if they have , they are absolutely invisible . WEIRD !
nofeet3
It is NOT because you selected the whole C drive , and is not due to any carelessness on your part. I have selected all files individually , and have tried time and time and time again , when I plug the ext hard drive into my other laptop to see if the files copy , they don't . I have tried this over and over and over again desperately all today , it is not working , even going so far as to select individual files rather than bigger directories to try and transfer in smaller in smaller batches ,just in case it couldn't handle large transfers all at once . That is not the case either . It just simply will not transfer files roughly bigger than 2mb . NO MUSIC !! THIS IS VERY FRUSTRATING !!
I am not sure at present whether this program can rightly be called "Rescue and Recover". It is one of the main reasons I selected Lenovo , and this is not a good demonstration of it's abilites at all .
PLEASE HELP ME !!
ANY HELP WOULD BE HIGHLY APPRECIATED !!
Thanks so much in advance for any help anybody can give , and best regards ,
Carl . -
SCCM 2012 R2 User State Migration Win XP to Win 8.1 does not migrate Domain User Files
Hi @ all
i'm trying migrate Win XP Sp3 to Win 8.1 using SCCM 2012 R2. So i followed the how to from the SCCM Team.
https://blogs.technet.com/b/configmgrteam/archive/2013/09/12/how-to-migrate-user-data-from-win-xp-to-win-8-1-with-system-center-2012-r2-configmgr.aspx
All things worked fine, but the user files from my test Domain user are not restored.
Here some extracts of the loadstate log.
2014-01-07 15:49:16, Info [0x000000] User SCCM\test.user maps to S-1-5-21-2486663232-1734351201-1738771205-1113
2014-01-07 15:49:16, Info [0x000000] User TEST-COMPUTER\Administrator maps to TEST-COMPUTER\Administrator
2014-01-07 15:49:16, Error [0x000000] The account TEST-COMPUTER\User is chosen for migration, but the target does not have account TEST-COMPUTER\User. See documentation
on /lac, /lae, /ui, /ue and /uel options.
2014-01-07 15:49:16, Info [0x000000] Failed.[gle=0x00000006]
2014-01-07 15:49:16, Info [0x000000] Unable to create a local account because /lac was not specified[gle=0x00000006]
2014-01-07 15:49:16, Info [0x000000] Entering MigCloseCurrentStore method
2014-01-07 15:49:16, Info [0x0801dc] Closing catalog file
2014-01-07 15:49:16, Info [0x0801dd] Deleting catalog file at C:\Windows\Temp\tmpF6E7.tmp\Temp\tmp9F3.tmp
2014-01-07 15:49:16, Info [0x000000] Leaving MigCloseCurrentStore method
2014-01-07 15:49:16, Info [0x000000] USMT Completed at 2014/01/07:15:49:16.078[gle=0x00000057]
The user sccm\test.user is my test user but, i cannot see any error in relation to that user.
Has some some an idea?
Thank you
AdrianHi,
I found a similar article for your reference.
http://blogs.technet.com/b/sudheesn/archive/2009/12/28/in-place-upgrade-from-windows-xp-to-windows-7.aspx
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Does Time Machine Copy UNCHANGED files over and over??
Okay, it seems to me that whatever files I have selected for backup are copied by Time Machine EVERY SINGLE TIME it backs up my Mac, instead of just when I make changes to them. Is that correct? If so, that just seems to be a massive waste of space on the external hard drive, and is probably the reason my 1TB drive runs out of space so quickly.
For example, I don't need 50 copies of my iTunes Library. I just need ONE copy. Time Machine should back up the music files ONCE, and if I add more songs to iTunes, it should then detect it and backup JUST the new files. Same thing with a Word document or whatever...make ONE copy of the file and then if I ALTER the file, make a copy of the ALTERED FILE.
Am I making sense here or is this just wishful thinking? Is there a way to make these types of adjustments in settings that I am missing?
Thanks!Shugama wrote:
Okay, it seems to me that whatever files I have selected for backup are copied by Time Machine EVERY SINGLE TIME it backs up my Mac, instead of just when I make changes to them. Is that correct?
no, that's wrong. that would indeed be a huge waste of space. TM only backs up afresh new and changed files since the last backup. everything else is *hard linked* to existing backup copies. read up on what a hard link is.
http://en.wikipedia.org/wiki/Hard_link
that's why incremental backups take very little space and yet every single TM backup is a full and completely independent copy of your system at the backup time. and that's why you can have a lot of TM backups fit on your backup drive.
If so, that just seems to be a massive waste of space on the external hard drive, and is probably the reason my 1TB drive runs out of space so quickly.
For example, I don't need 50 copies of my iTunes Library. I just need ONE copy. Time Machine should back up the music files ONCE, and if I add more songs to iTunes, it should then detect it and backup JUST the new files. Same thing with a Word document or whatever...make ONE copy of the file and then if I ALTER the file, make a copy of the ALTERED FILE.
Am I making sense here or is this just wishful thinking? Is there a way to make these types of adjustments in settings that I am missing?
Thanks! -
Does mac G5 support zipped files?
yup that's my question. thanks =)
You can also zip files direct from your Finder in OS X. Just Control-Click on the file you want to zip and select "Create Archive of "file name" " from the contextual menu. Check the MacOSG Podcast for more OS X tips.
-Bmer
Mac Owners Support Group
Join Us @ MacOSG.com
An Apple User Group
MacOSG Podcast >> -
Bad file is not created during the external table creation.
Hello Experts,
I have created a script for external table in Oracle 10g DB. Everything is working fine except it does not create the bad file, But it creates the log file. I Cann't figure out what is the issue. Because my shell scripts is failing and the entire program is failing. I am attaching the table creation script and the shell script where it is refering and the error. Kindly let me know if something is missing. Thanks in advance
Table Creation Scripts:_-------------------------------
create table RGIS_TCA_DATA_EXT
guid VARCHAR2(250),
badge VARCHAR2(250),
scheduled_store_id VARCHAR2(250),
parent_event_id VARCHAR2(250),
event_id VARCHAR2(250),
organization_number VARCHAR2(250),
customer_number VARCHAR2(250),
store_number VARCHAR2(250),
inventory_date VARCHAR2(250),
full_name VARCHAR2(250),
punch_type VARCHAR2(250),
punch_start_date_time VARCHAR2(250),
punch_end_date_time VARCHAR2(250),
event_meet_site_id VARCHAR2(250),
vehicle_number VARCHAR2(250),
vehicle_description VARCHAR2(250),
vehicle_type VARCHAR2(250),
is_owner VARCHAR2(250),
driver_passenger VARCHAR2(250),
mileage VARCHAR2(250),
adder_code VARCHAR2(250),
bonus_qualifier_code VARCHAR2(250),
store_accuracy VARCHAR2(250),
store_length VARCHAR2(250),
badge_input_type VARCHAR2(250),
source VARCHAR2(250),
created_by VARCHAR2(250),
created_date_time VARCHAR2(250),
updated_by VARCHAR2(250),
updated_date_time VARCHAR2(250),
approver_badge_id VARCHAR2(250),
approver_name VARCHAR2(250),
orig_guid VARCHAR2(250),
edit_type VARCHAR2(250)
organization external
type ORACLE_LOADER
default directory ETIME_LOAD_DIR
access parameters
RECORDS DELIMITED BY NEWLINE
BADFILE ETIME_LOAD_DIR:'tstlms.bad'
LOGFILE ETIME_LOAD_DIR:'tstlms.log'
READSIZE 1048576
FIELDS TERMINATED BY '|'
MISSING FIELD VALUES ARE NULL(
GUID
,BADGE
,SCHEDULED_STORE_ID
,PARENT_EVENT_ID
,EVENT_ID
,ORGANIZATION_NUMBER
,CUSTOMER_NUMBER
,STORE_NUMBER
,INVENTORY_DATE char date_format date mask "YYYYMMDD HH24:MI:SS"
,FULL_NAME
,PUNCH_TYPE
,PUNCH_START_DATE_TIME char date_format date mask "YYYYMMDD HH24:MI:SS"
,PUNCH_END_DATE_TIME char date_format date mask "YYYYMMDD HH24:MI:SS"
,EVENT_MEET_SITE_ID
,VEHICLE_NUMBER
,VEHICLE_DESCRIPTION
,VEHICLE_TYPE
,IS_OWNER
,DRIVER_PASSENGER
,MILEAGE
,ADDER_CODE
,BONUS_QUALIFIER_CODE
,STORE_ACCURACY
,STORE_LENGTH
,BADGE_INPUT_TYPE
,SOURCE
,CREATED_BY
,CREATED_DATE_TIME char date_format date mask "YYYYMMDD HH24:MI:SS"
,UPDATED_BY
,UPDATED_DATE_TIME char date_format date mask "YYYYMMDD HH24:MI:SS"
,APPROVER_BADGE_ID
,APPROVER_NAME
,ORIG_GUID
,EDIT_TYPE
location (ETIME_LOAD_DIR:'tstlms.dat')
reject limit UNLIMITED;
_***Shell Script*:*----------------_*
version=1.0
umask 000
DATE=`date +%Y%m%d%H%M%S`
TIME=`date +"%H%M%S"`
SOURCE=`hostname`
fcp_login=`echo $1|awk '{print $3}'|sed 's/"//g'|awk -F= '{print $2}'`
fcp_reqid=`echo $1|awk '{print $2}'|sed 's/"//g'|awk -F= '{print $2}'`
TXT1_PATH=/home/ac1/oracle/in/tsdata
TXT2_PATH=/home/ac2/oracle/in/tsdata
ARCH1_PATH=/home/ac1/oracle/in/tsdata
ARCH2_PATH=/home/ac2/oracle/in/tsdata
DEST_PATH=/home/custom/sched/in
PROGLOG=/home/custom/sched/logs/rgis_tca_to_tlms_create.sh.log
PROGNAME=`basename $0`
PROGPATH=/home/custom/sched/scripts
cd $TXT2_PATH
FILELIST2="`ls -lrt tstlmsedits*.dat |awk '{print $9}'`"
NO_OF_FILES2="`ls -lrt tstlmsedits*.dat |awk '{print $9}'|wc -l`"
$DEST_PATH/tstlmsedits.dat for i in $FILELIST2
do
cat $i >> $DEST_PATH/tstlmsedits.dat
printf "\n" >> $DEST_PATH/tstlmsedits.dat
mv $i $i.$DATE
#mv $i $TXT2_PATH/test/.
mv $i.$DATE $TXT2_PATH/test/.
done
if test $NO_OF_FILES2 -eq 0
then
echo " no tstlmsedits.dat file exists " >> $PROGLOG
else
echo "created dat file tstlmsedits.dat at $DATE" >> $PROGLOG
echo "-------------------------------------------" >> $PROGLOG
fi
NO_OF_FILES1="`ls -lrt tstlms*.dat |awk '{print $9}'|wc -l`"
FILELIST1="`ls -lrt tstlms*.dat |awk '{print $9}'`"
$DEST_PATH/tstlms.datfor i in $FILELIST1
do
cat $i >> $DEST_PATH/tstlms.dat
printf "\n" >> $DEST_PATH/tstlms.dat
mv $i $i.$DATE
# mv $i $TXT2_PATH/test/.
mv $i.$DATE $TXT2_PATH/test/.
done
if test $NO_OF_FILES1 -eq 0
then
echo " no tstlms.dat file exists " >> $PROGLOG
else
echo "created dat file tstlms.dat at $DATE" >> $PROGLOG
fi
cd $TXT1_PATH
FILELIST3="`ls -lrt tstlmsedits*.dat |awk '{print $9}'`"
NO_OF_FILES3="`ls -lrt tstlmsedits*.dat |awk '{print $9}'|wc -l`"
$DEST_PATH/tstlmsedits.datfor i in $FILELIST3
do
cat $i >> $DEST_PATH/tstlmsedits.dat
printf "\n" >> $DEST_PATH/tstlmsedits.dat
mv $i $i.$DATE
#mv $i $TXT1_PATH/test/.
mv $i.$DATE $TXT1_PATH/test/.
done
if test $NO_OF_FILES3 -eq 0
then
echo " no tstlmsedits.dat file exists " >> $PROGLOG
else
echo "created dat file tstlmsedits.dat at $DATE" >> $PROGLOG
echo "-------------------------------------------" >> $PROGLOG
fi
NO_OF_FILES4="`ls -lrt tstlms*.dat |awk '{print $9}'|wc -l`"
FILELIST4="`ls -lrt tstlms*.dat |awk '{print $9}'`"
$DEST_PATH/tstlms.datfor i in $FILELIST4
do
cat $i >> $DEST_PATH/tstlms.dat
printf "\n" >> $DEST_PATH/tstlms.dat
mv $i $i.$DATE
# mv $i $TXT1_PATH/test/.
mv $i.$DATE $TXT1_PATH/test/.
done
if test $NO_OF_FILES4 -eq 0
then
echo " no tstlms.dat file exists " >> $PROGLOG
else
echo "created dat file tstlms.dat at $DATE" >> $PROGLOG
fi
#connecting to oracle to generate bad files
sqlplus -s $fcp_login<<EOF
select count(*) from rgis_tca_data_ext;
select count(*) from rgis_tca_data_history_ext;
exit;
EOF
#counting the records in files
tot_rec_in_tstlms=`wc -l $DEST_PATH/tstlms.dat | awk ' { print $1 } '`
tot_rec_in_tstlmsedits=`wc -l $DEST_PATH/tstlmsedits.dat | awk ' { print $1 } '`
tot_rec_in_tstlms_bad=`wc -l $DEST_PATH/tstlms.bad | awk ' { print $1 } '`
tot_rec_in_tstlmsedits_bad=`wc -l $DEST_PATH/tstlmsedits.bad | awk ' { print $1 } '`
#updating log table
echo "pl/sql block started"
sqlplus -s $fcp_login<<EOF
define tot_rec_in_tstlms = '$tot_rec_in_tstlms';
define tot_rec_in_tstlmsedits = '$tot_rec_in_tstlmsedits';
define tot_rec_in_tstlms_bad = '$tot_rec_in_tstlms_bad';
define tot_rec_in_tstlmsedits_bad='$tot_rec_in_tstlmsedits_bad';
define fcp_reqid ='$fcp_reqid';
declare
l_tstlms_file_id number := null;
l_tstlmsedits_file_id number := null;
l_tot_rec_in_tstlms number := 0;
l_tot_rec_in_tstlmsedits number := 0;
l_tot_rec_in_tstlms_bad number := 0;
l_tot_rec_in_tstlmsedits_bad number := 0;
l_request_id fnd_concurrent_requests.request_id%type;
l_start_date fnd_concurrent_requests.actual_start_date%type;
l_end_date fnd_concurrent_requests.actual_completion_date%type;
l_conc_prog_name fnd_concurrent_programs.concurrent_program_name%type;
l_requested_by fnd_concurrent_requests.requested_by%type;
l_requested_date fnd_concurrent_requests.request_date%type;
begin
--getting concurrent request details
begin
SELECT fcp.concurrent_program_name,
fcr.request_id,
fcr.actual_start_date,
fcr.actual_completion_date,
fcr.requested_by,
fcr.request_date
INTO l_conc_prog_name,
l_request_id,
l_start_date,
l_end_date,
l_requested_by,
l_requested_date
FROM fnd_concurrent_requests fcr, fnd_concurrent_programs fcp
WHERE fcp.concurrent_program_id = fcr.concurrent_program_id
AND fcr.request_id = &fcp_reqid; --fnd_global.conc_request_id();
exception
when no_data_found then
fnd_file.put_line(fnd_file.log, 'Error:RGIS_TCA_TO_TLMS_CREATE.sh');
fnd_file.put_line(fnd_file.log, 'No data found for request_id');
fnd_file.put_line(fnd_file.log, sqlerrm);
raise_application_error(-20001,
'Error occured when executing RGIS_TCA_TO_TLMS_CREATE.sh ' ||
sqlerrm);
when others then
fnd_file.put_line(fnd_file.log, 'Error:RGIS_TCA_TO_TLMS_CREATE.sh');
fnd_file.put_line(fnd_file.log,
'Error occured when retrieving request_id request_id');
fnd_file.put_line(fnd_file.log, sqlerrm);
raise_application_error(-20001,
'Error occured when executing RGIS_TCA_TO_TLMS_CREATE.sh ' ||
sqlerrm);
end;
--calling ins_or_upd_tca_process_log to update log table for tstlms.dat file
begin
rgis_tca_to_tlms_process.ins_or_upd_tca_process_log
(l_tstlms_file_id,
'tstlms.dat',
l_conc_prog_name,
l_request_id,
l_start_date,
l_end_date,
&tot_rec_in_tstlms,
&tot_rec_in_tstlms_bad,
null,
null,
null,
null,
null,
null,
null,
l_requested_by,
l_requested_date,
null,
null,
null,
null,
null);
exception
when others then
fnd_file.put_line(fnd_file.log, 'Error:RGIS_TCA_TO_TLMS_CREATE.sh');
fnd_file.put_line(fnd_file.log,
'Error occured when executing rgis_tca_to_tlms_process.ins_or_upd_tca_process_log for tstlms file');
fnd_file.put_line(fnd_file.log, sqlerrm);
end;
--calling ins_or_upd_tca_process_log to update log table for tstlmsedits.dat file
begin
rgis_tca_to_tlms_process.ins_or_upd_tca_process_log
(l_tstlmsedits_file_id,
'tstlmsedits.dat',
l_conc_prog_name,
l_request_id,
l_start_date,
l_end_date,
&tot_rec_in_tstlmsedits,
&tot_rec_in_tstlmsedits_bad,
null,
null,
null,
null,
null,
null,
null,
l_requested_by,
l_requested_date,
null,
null,
null,
null,
null);
exception
when others then
fnd_file.put_line(fnd_file.log, 'Error:RGIS_TCA_TO_TLMS_CREATE.sh');
fnd_file.put_line(fnd_file.log,
'Error occured when executing rgis_tca_to_tlms_process.ins_or_upd_tca_process_log for tstlmsedits file');
fnd_file.put_line(fnd_file.log, sqlerrm);
end;
end;
exit;
EOF
echo "rgis_tca_to_tlms_process.sql started"
sqlplus -s $fcp_login @$SCHED_TOP/sql/rgis_tca_to_tlms_process.sql $fcp_reqid
exit;
echo "rgis_tca_to_tlms_process.sql ended"
_**Error:*----------------------------------*_
RGIS Scheduling: Version : UNKNOWN
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
TCATLMS module: TCA To TLMS Import Process
Current system time is 18-AUG-2011 06:13:27
COUNT(*)
16
COUNT(*)
25
wc: cannot open /home/custom/sched/in/tstlms.bad
wc: cannot open /home/custom/sched/in/tstlmsedits.bad
pl/sql block started
old 33: AND fcr.request_id = &fcp_reqid; --fnd_global.conc_request_id();
new 33: AND fcr.request_id = 18661823; --fnd_global.conc_request_id();
old 63: &tot_rec_in_tstlms,
new 63: 16,
old 64: &tot_rec_in_tstlms_bad,
new 64: ,
old 97: &tot_rec_in_tstlmsedits,
new 97: 25,
old 98: &tot_rec_in_tstlmsedits_bad,
new 98: ,
ERROR at line 64:
ORA-06550: line 64, column 4:
PLS-00103: Encountered the symbol "," when expecting one of the following:
( - + case mod new not null others <an identifier>
<a double-quoted delimited-identifier> <a bind variable> avg
count current exists max min prior sql stddev sum variance
execute forall merge time timestamp interval date
<a string literal with character set specification>
<a number> <a single-quoted SQL string> pipe
<an alternatively-quoted string literal with character set specification>
<an alternatively-q
ORA-06550: line 98, column 4:
PLS-00103: Encountered the symbol "," when expecting one of the following:
( - + case mod new not null others <an identifier>
<a double-quoted delimited-identifier> <a bind variable> avg
count current exists max min prior sql st
rgis_tca_to_tlms_process.sql started
old 12: and concurrent_request_id = '&1';
new 12: and concurrent_request_id = '18661823';
old 18: and concurrent_request_id = '&1';
new 18: and concurrent_request_id = '18661823';
old 22: rgis_tca_to_tlms_process.run_tca_data(l_tstlms_file_id,&1);
new 22: rgis_tca_to_tlms_process.run_tca_data(l_tstlms_file_id,18661823);
old 33: rgis_tca_to_tlms_process.run_tca_data_history(l_tstlmsedits_file_id,&1);
new 33: rgis_tca_to_tlms_process.run_tca_data_history(l_tstlmsedits_file_id,18661823);
old 44: rgis_tca_to_tlms_process.send_tca_email('TCATLMS',&1);
new 44: rgis_tca_to_tlms_process.send_tca_email('TCATLMS',18661823);
declare
ERROR at line 1:
ORA-20001: Error occured when executing RGIS_TCA_TO_TLMS_PROCESS.sql ORA-01403:
no data found
ORA-06512: at line 59
Executing request completion options...
------------- 1) PRINT -------------
Printing output file.
Request ID : 18661823
Number of copies : 0
Printer : noprint
Finished executing request completion options.
Concurrent request completed successfully
Current system time is 18-AUG-2011 06:13:29
---------------------------------------------------------------------------Hi,
Check the status of the batch in SM35 transaction.
if the batch is locked by mistake or any other error, now you can release it and aslo you can process again.
To Release -Shift+F4.
Also you can analyse the job status through F2 button.
Bye -
I think the DVD player reader on my Mac is going bad. Until I get it fixed Is there a way to copy the files off of an Apple Install DVD onto an external drive and then do theinstall from the external drive? It's ILife 11 if that makes a difference. Finder won't let me see the files to copy. I know - dumb question.
Thanks.
BobAdding an SSD is not a simple endeavour like adding additional memory or adding another hard drive to a Mac Pro. That's probably why the option is only offered as an option at the time of purchase. Even if your Apple store was willing to install the necessary parts you will probably be paying for 1-2 hours of labor plus the cost of purchasing the necessary service parts (SSD, bracket, cables, etc) which I suspect will make the upgrade cost much higher than what it costs to add the SSD option when purchasing a new system.
I use my system for business and need it to work reliably. Even though I'm fairly handy with tools I would not be willing to risk damaging my system and voiding my warranty by opening my system and removing the logic board and several other parts in order to squeeze in an SSD option and attach the appropriate cables and brackets. I'm also not prepared to deal with the hassles of explaining why my system has unauthorized parts installed in the event I experience issues and need to make use of my Apple warranty. My time is valuable, so I would probably investigate external storage options, or if I needed the speed of an SSD, I would consider selling my existing system and then purchase a new system configured with an SSD.
If you haven't already done so I suggest doing a search on 'iMac SSD installation' to see what's involved. It might help you understand why the SSD option is not offered post purchase. -
How can I copy programs (iWorks) and files from Time Capsule to my HD manually? The problem is that the migration assistant does not recognize my backup file and the user on the TC. (If I open the TC on finder, it it there though)
How can I copy programs (iWorks) and files from Time Capsule to my HD manually? The problem is that the migration assistant does not recognize my backup file and the user on the TC. (If I open the TC on finder, it it there though)
-
I have been using Adobe Photoshop Elements on an older Mac...just bought Mac Mini and migrated all my files...but 4.0 Does not work....can I upgrade PSE 4.0 to PSE 13?
Yes, any version of PSE qualifies for upgrade pricing, but if you're in the US you might want to consider running the trial for now and waiting for the black friday specials, when the full version will be a lot less than the adobe upgrade price.
-
Why does Mac OX 10.6.8 keep making copies of a file anytime I download, copy, or move a file?
Why does Mac OX 10.6.8 keep making copies of a file anytime I download, copy, or move a file? It will copy, dowload or move the file, then begin making copies until I reboot. This makes it impossible to deal wit hfiles unless I want to spend a lot of time rebooting after every time, then deleting all the redundant copies.
If I understand what you are saying this is very strange. Sure you tried Reparing Permissions and all that. Also sure you're aware that when moving a file from the hard disk to an external - the default is to make a copy rather than a move. If the movement is with the same disk (e.g. hard disk - hard disk) the Default is a Move rather than Copy.
Anyway try this: Move a file between location where you would normally have this problem while holding the Command Key (which triggers a Move rather than a Copy). I would also try quickly setting up a New User Account and see if the problem is present within this New Account. This may provide a clue as to what is happening.
Also, what browser are you using when the download problem happens? -
Hi, I migrated from PC to Mac, but I can't find some files I had in the PC, this files were invisible because I had them as hidden but just before migrating I switched off the "hidden" option, ¿Does this files migrated as hidden files or they didn't migrated?
If the filename starts with a dot (.thisfile), then it will be hidden on the Mac.
You can use a 3rd party App, such as EasyFind to search for the file on your Mac, and then re-name (remove the dot) -
when using migration does it copy the files to the new computer or transfer them (leaving the files only on the new computer)?
It leaves them on the old computer. Nothing will be changed on it.
-
Does migration assistant move files or copy them?
I'm running Yosemite on a separate partition. I want to copy some of my information from 10.6.8, but I want to leave 10.6.8 intact, as it is still (and will remain for quite some time) my primary operating system. Does migration assistant move the information, or copy it?
It will copy info and won't delete anything from the originating drive. If you are just looking to copy some files, log back into the 10.6.8 and copy them to the user desktop account of the other drive.
If you are looking to migrate a user account, be aware that the account name will need to be different than the one you are currently using in Yosemite. -
i would like to copy files from an external hard drive to my Mac. I intend to do this several times. Will Mac copy the same files every time or can it segregate and only copy new files from the external hard drive?
Only copies the file or files you select. The selection will remain unless you change it in case you wish to repeat the same copy to another location. Multiple and different copy operations can be run simultaneously.
-
i set up my new computer using the apple ID i always use, and then later migrated all my files from my old mac book to the same new one, but under a different user (same apple ID). how do i consolidate the two users on my new mac book?
Well if you use the Finder Go menu to Computer, a window opens up double click on your boot drive and then on Users folder, open the other user folder and open Public and drop your files into DropBox
When you do this it will copy them and change the permissions and user assigned to it, so log into the other user and place them into your respective normal folders.
Once you have all your files over and don't need the old user, use System Preferences > Accounts to delete it if you wish, however it's good two Admin accounts on the machine in case something bad happens in the other. Some people for security reasons on use a Standard account for most uses and a emergency Admin account.
One can still do most Admin things in Standard user.
Maybe you are looking for
-
Accessing one iTunes Libray on External HD in Mixed Environment (Mac & PC)
I've read many posts here and other places on this subject, but have yet to get a definitive answer to my question/issue. I currently have (2) MacBook Pro laptops and (2) Windows XP PC's on my network. The PCs are hardwired while the MB Pros access t
-
I have a Laserjet 200 Color printer. I have replaced the ink cartridges but I still get skips in the printing. There is no rhyme or reason as the area that is missing ink varies. Any suggestions to clear up the problem or do I need a new printer?
-
HTTP Header SOAPAction Problem
hi Everyone, this is an extract of my test soap program: SOAPConnectionFactory soapfactory = SOAPConnectionFactory.newInstance(); SOAPConnection connection = soapfactory.createConnection(); URL endpoint = new URL("http://url.asmx"); MessageFactory me
-
大家好: 我在看<<oracle database 10g performance tuning tips & techniques>>时,看到索引那一章时,关于索引的二度高度,讲的不够细致,请高手指点一下,为什么删除了表中的20%-25%的数据后会增加二度高度的值? 还有直方图的那一节也讲的不够详细,谁能详细的给讲一下直方图创建后是如何提高的性能,如果能细致的讲一下,更是感激不尽. 谢谢各位大侠了!
-
JVM crashes when selecting a CLOB in a OracleCallableStatement
Hi all: We have a lot of places in our codebase where we "batch" a no. of selects using the OracleCallableStatement for better performance (i.e. save multiple roundtrips to the db). Recently we upgraded to Oracle 8.1.7 and converted the LONG column i